MacBook Pro :: It Won't Recognize USBs Mounted Any More
May 20, 2012
I'm now running 10.6.8 on a MacBook Pro and last night when I plugged in my external hard drive or a dongle, it didn't come up on the desktop. I tried both USB ports and different dongles - nothing. Yet every time I unplugged I got the warning message that unplugging a disc without ejecting via the Finder could lose files on the disc. The Disc Utility can see the USBs and I've tried repairing and verifying the disc it sees - nothing. I've restarted and shut down on separate occasions and on another re-set SMC by removing the battery - nothing. So basically, it's 'seeing' the USB but not putting it on the desktop graphically so I can't see any files on the USB or save anything to it.
I only updated to 10.6.8 a couple of weeks ago and though I haven't had any issue like this till last night, I can't think of anything else that has changed with my set-up.
I've tried plugging two different cameras into the USB, MBP recognises neither. They don't show in disk utility either. Any solutions I can try? I have tried resetting the PRAM.
Info: MacBook Pro, OS X Mavericks (10.9.4), 13" June 2012
First, safari froze (spinning beach ball). I only had 2 tabs open (cnn and facebook) and Mail. Not much going on, it has never froze like that so I let it sit for about 10 minutes. It was still spinning when I came back so I did a hard shut down (held power button). I tried to turn it back on about a minute later but it wouldn't go past the grey screen...and then the lovely folder/question mark came up. Joy oh joy.
So I booted from the install disk and it said my hdd was not mounted. I ran disk utility and it gave me these errors:
-Invalid node structure -Volume needs to be repaired -Error: The underlying task reported failure on exit
Recently I've had this problem where-by i can't right-click on a mounted disk and select eject from the contextual menu. When I attempt to right-click, the Finder 'refreshes' itself and I don't get a contextual menu at-all.
I have Seagate FreeAgent Go 250 GB USB Harddrive. I don't know why but I cannot access my drive. When i plug usb cable, nothing appears on desktop. Only Disk utility can see Drive. but it seems in grey font. when i click mount, it gives error that says repair disk. But when i start repair disk, nothing is happening. Progress bar is not moving. Just preparing bar like this
In order that my tele provider remotly can take control over my computer they send me a program (_yousee QS8c.dmg ) via internet.When I open it I get the message that the program fails to open. I can get the attached information which automatic will be sent to Apple.I never gat any answers and I far from being a superuser so I am lost.
I was writing files to an external hard drive that was NTFS using NTFS-3G by MacFuse. However, I closed the macbook lid and it went to sleep and I unplugged the drive. Then, when I opened it back up again, it said it wasn't unmounted properly and now all my files are gone on the drive! However, there are only 58 gigs worth of files showing on the drive, but it says there are 132 GB used. So I am guessing the files are still on it, just not showing up. Is there a way for me to see these or access them. It is very valuable files!
I have a couple of Windows systems on my home network, and it gets a bit confusing when I've got 2 mounted volumes on my desktop both called "Users", as it's not possible to see which one relates to which PC.
Is it possible to use a custom icon for a particular volume so I can visually differentiate between the two? If so, how do I do it?
And no, changing the name of the Windows share is not an option!
i'm trying to run Red alert on my mac using wine (just discovered the're giving it away for free ).
Problem is I've managed to install wine, download red alert but need to navigate to the iso to run the install program for red alert. This might be very basic but I don't know what directory to go to in terminal to get to a mounted iso...
I have an external drive mounted via firewire and formatted with HFS.
I would like this drive to be accessible by an administrator, say admin, only and have used Finder to set permissions. So the user and group for the /Volume/<drive> is admin:admin.
I have created a standard user, say user. However I find that when the standard user logs in he can access the volume and the rights for the drive become user:user instead of admin:admin, so that drive is accessible by any login user no matter what permissions I set as an administrator.
Is there any way to make a shortcut to the desktop of a mounted network drive? like when you map a drive in windows XP but its in "My computer" instead of the desktop?
I am using an external hard drive with Airport Extreme for Time Machine. Should I be worried about my data in an event of power loss because the drive is always mounted? Has anyone loss a drive due to power loss and what have you done to fix it or prevent it? What are you using as backup power and why? I know I can go with Drobo, but are there other lower cost options?
On my MacBook Pro I have set up a bunch of shares to mount upon login. They then are presented by icons on the desktop, all using server "afp://BMK-rnp (AFP)._afpovertco._tcp.local/SHARE NAME". The shares are hosted on my Infrant/NetGear ReadyNAS Pro, which uses the AFP protocol, and advertises the AFP service over Bonjour. However, when I have had the MBP sleeping for a few hours, not just a few minutes, and I open it back up, it has lost the connection to the shares. I get a message that the server is unavailable, and that the shares are disconnected. I can't do anything about it, except disconnect the shares in the pop-up, open up finder, and click on the "BMK-rnp (AFP)" icon under shared, and then reconnect to the shares. Is there a way, using std. OSX tools, to "re-connect" to the shares? I have tried a small utility - "Bounjour Mounter" - but I never got it working right.
I just noticed this strange thing a couple of weeks ago and just found the cause. Note I'm running a Mac Pro w/4 drives, 1 of which is dedicated Time Machine drive. Usually the system is dead quiet (disk activity as well) except when I am actually doing something or time machine is backing up. I have also noted what spotlight 'sounds' like when it's doing a background index. This 'heartbeat' is a click, click, thump, thump (I just used those terms to describe two distinct sounds, referring to disk access/seeking). It will do this forever every 2-3 seconds. I have closed everything, looked at activity monitor, quit things that I thought might be causing it with no help. Note with the 'thump' there is an ever so slight increase in 1 of the cpu monitors.
Anyway, tonight I just decided to dig more in to it. Because I have 4 drives I decided to at least dis-mount 3 of them to try to determine which drive was actually getting accessed. That's when I noticed I had a cf flash card mounted in my card reader. I dismounted that 1st and, well, the drive access stopped! I re-inserted it and it started up again. I inserted a different (SD instead of CF) card and it also started again. I've never noticed this before. What would be monitoring a mounted flash card? Further investigation revealed that it also does it with USB 'thumb' drives and USB 'hard' drives. BTW, I'm on 10.5.7 if that matters. Now that I know WHAT is wearing out my drive seek mechanism, I can stop it by ejecting any removable media!
My external HD crashed, with my complete iTunes library on it . I needed CPR. Then I thought: no problems, I have my trusty backup. So I whipped out my other HD with a 30Go .sparseimage on it. I use CCC to do my incremental backups of my library, un-encrypted (i.e. I do not encrypt it). I mount it... and what do I get? The right files, except 300Mb instead of 30Gb! I tried to restore via Disk Utility, with the same result: a 300 Mb file...
Here's some info/weirdness that might help: - I'm on OS X 10.4 Tiger - I verified the disk image with Disk Utility - all OK - I copied the image (the whole 30Gb of it) on a fresh HD, and mounted it. The root folder on the mounted image resides in /private/temp/ccc_dmg_mount.e7h4Mt. Is that normal? - If I look at the image info (via apple-I or Disk Utility) it gives me a total capacity of 268 GB, which is the size of the HD it resides on! Is that normal?
I have an MBP running OS X 10.6.5 and I have a 500GB external HDD with 2 partitions (NTFS & FAT32), which I mounted to my MBP using FSTAB. Some of the files in the NTFS partitions are greyed-out, and i can't copy/open them on my MBP.
1. Copying the file returns this error: "one or more items in {file} can't be changed because they are in use" 2. double-clicking the file does nothing 3. Right-click > Open With, returns this error "Item {file} is used by mac os x and can't be opened"
I've used Terminal to move the file to FAT 32 drive and my MBP Desktop, but steps #1, #2, #3 still don't work. I realized the files that are greyed out are those that I copied from my MBP to the NTFS drive. Existing files in the drive can be opened.
in my office I've a network hard drive mounted volume on /Volumes/guest-share, when I try to open directory I get an error:
"The folder can't be opened because you don't have permission to see its contents" imac:/ roccoverrastro$ ls -AOel /Volumes/ total 56 -rw-r--r--@ 1 roccoverrastro admin - 6148 26 Giu 00:33 .DS_Store
Recently I haven't been able to backup. Why this is? Not too sure. I don't remember changing any settings or anything recently but within the last 2 weeks or so I haven't been able to backup at all. When I start backing up it says "preparing backup" then an error message pops up that says "The backup disk image could not be mounted".
I just got a new harddisk and have been trying to get it functioning properly today, the problem is the following: Drive is partitioned in HFS+ using macdrive7 (installed on my system). It does show up in windows very easily thanks to the airport utility, however, it shows the file system as being fat32. I formatted the disk in HFS+ on purpose to be able to storage large files in the network drive, so this is a problem. Also, the disks show empty, although i already put some files on the disk for testing purposes, this was done when the drive was connected directly via usb. Does anyone know how I can get windows to show the drives as HFS+?
I'm not able to connect to a windows share on a Windows 2003 server with my AD username and password. I'm running OS 10.5.8 from a MacBook Pro.The AD credentials work from other Macs on the network running 10.4.11 but it will not connect from mine. I've added a virgin user account and had the same problem from that account. I've reinstalled the operating system with the same failure. AD credentials allow me to log into the Exchange server via Entoruage.
My Mac is not bound to AD and neither are any of the other Mac workstations in our group. The message I get after entering my username and password in the Windows dialog box is usually "The volume could not be mounted ". In the Console log the following entry pertains to this but it's foreign to me, CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
I just installed Lion on a machine that I use daily. One of the routine things I do is connect to FTP servers and search their contents to then collect files and process them. I was unpleasantly surprised when I found that I was simply unable to search the FTP server, it simply doesn't bring back any results.
I tried on 2 other Lion Macs and both have the same symtoms, one of the other 2 macs is brand new out of the box (3 days old) I had to downgrade to Snow Leopard to return the machine to a useable state.
Is Apple aware of this issue, is there a workaround? I prefer to not install 3rd party FTP apps. In fact, I tried Transmit and it too would not search but I assure you that the host of FTP servers I login in to are just fine as any other PC or Mac (10.6 or inferior) work without any problem.
Has Apple changed something? PS the mac I tried it on was even cleanly installed, nothing but Apple SW and fully up-to-date.
I've spent a good deal of time over three days trying to do something that I think is both doable and shouldn't be all that hard. I have a 750gb external HD attached to a Mini, and I'd like to use that drive to do TM backups for the Mini, as well as three MacBooks.
But I can't seem to get access to the backup drive from the laptops to either get going in the first place, or to remain available for TM. I get "volume can't be mounted" errors, "image can't be mounted errors", etc. I find that I can't ever eject the backup drive from the Mini (always told an application is using it...even if I've just booted up the Mini). And with one of the MacBooks, even a direct FW connection to the drive doesn't result in the drive showing up in Finder.
Isn't this a pretty straightforward thing to do? Is there a step by step somewhere that might help me figure out what I'm doing wrong, or what I need to fix? Should I reformat the drive again and start over (there are no important backups on it yet)? By the way, the drive is formatted Mac OS Extended (Journaled).
I'm having trouble backing up with Time Machine. Here's the setup:
1. Three, 1TB external hard drives in a concatenated software RAID. This means that they are treated as one large drive. There is no mirroring, no increased data rate, blah blah blah. It's just three hard drives in the place of one. I am aware that this means my backup is three times as likely to fail with the hardware, but that's OK.
2. These three are connected to a USB hub.
3. This hub is connected to a G5 tower. The G5 tower can back up to the concatenated drives (I'll call them just a RAID from here on), and also all additional external hard drives that I connect to the G5 tower have been backing up to the RAID no problem. This is great.
Here's the problem:
I'm trying to get two more computers to back up to the RAID wirelessly. I read a lot online about how this didn't used to be a supported feature (backing up to an external hard drive over a network with time machine), but that Apple has recently upgraded Time Machine to support this functionality.
The first computer I started with to try to backup over the network was a Macbook Pro, trying to get it to backup to this RAID. It can see the RAID over the network, mount it, copy files to it/read it, but CANNOT time machine backup to it. I select the network RAID as the backup device, hit "back up now," then get this message:
"The external volume cannot be mounted."
This is really bizzare, considering that it is mounted, and that I can copy to it. Just for your information, I have an airport extreme wireless network that has been working beautifully, no Keychain access issues, no 3rd party firewall, nothing. I've run through Applecare on this issue: the MacBook Pro has never done ANY time machine backup on the RAID, not even a partial one, so there's no dangling sparse bundle or backup folder or anything like that. All network permissions check out, etc. I've tried repairing the RAID with disk utility, as well as repairing permissions (although I have not done either of these things to the MacBookPro).
The latest thing I tried was plugging the RAID directly into the Macbook Pro. Here's where I got the first clue (at least I think so)...Plugged DIRECTLY into the MacBook Pro, the RAID will mount, but the MacBook Pro WILL NOT backup to the RAID. It gives me the same message: the selected volume cannot be mounted. Again, this is strange considering that, just like when I am viewing the RAID over the network, plugged directly into the MacBook Pro the RAID will mount, I can read it, copy files to it, etc.
I have considered plugging the RAID into the Airport extreme directly, but first of all this would mean much slower transfer speeds with the G5 tower, which is a big issue considering the files I am backing up every day, and two, since it seems that the RAID won't be recognized by the MacBook Pro even when plugged in directly, I'm thinking that this is a more fundamental issue.
I got this big hard drive and attached it to my Airport Extreme. I can get to it just fine, however, I would ideally like to make it so this drive is ALWAYS mounted on my computer. I've got my iTunes and iPhoto libraries on here, and it seems like every time I wake my computer or reboot, I need to reconnect to the drive, otherwise iTunes/iPhoto freak out because they can't find it. Is there a way I can tell my Mac to stay connected to the drive, and automatically look for it if it's not mounted?
My files were backing up for about a day, had 75gb of 100gb done and then my power went out. It cancelled out, and then when it came back on I tried to resume it. It started to backup 25gb, which I'm assuming is just the last 25gb that it had to do. Anyway, it did that for a while then stopped, and now when I try to backup, it says: "Time Machine Error: The backup disk image could not be mounted."
How do I backup the rest of my stuff? Do I have to start over? And is there a way to make it transfer faster? I mean, there's no way to directly connect it to your computer, is there? Also, in the Time Machine settings thing, it says "Available: 839.8GB of 929.5GB. Does that mean it has 839gb of my 929gb backed up? What happened to the other 71gb? I just want my stuff to be backed up, why is this so complicated?
Mounted SMB share does not show in sidebar and is unavailable to some apps (itunes, chrome). Shares do show up when browsing computer. Where should I start? This started after upgrade to 10.7.3
For sharing my iPhoto Library among multiple users on a MacBook Pro running, currently 10.6.8, I have by a Apple Support guide created a disk image file, and mounted it for storing my pictures without permission issues.However, to account for future expansion, the disk image is made to be 100 GB, while current photo library size is approx 50 GB. Is there any way of getting Time Machine to backup the files within the mounted disk, rather than backing up the disk image file itself? So that the size of the backup at present would be the actual size of contents of the disk, rather than the whole disk image file itself? And furthermore, by copying a disk image file, will the actual files within also be backuped?
I have a Macbook (blackbook) running OS X 10.5.3 and a 160GB Firelite HD that connects via USB. It use to show up and run just find but lately it hasn't been showing up on the desktop or in Finder. However, it shows up in Disk Utility, which shows that nothing is wrong with it. How do I get it to show back up on the desktop/finder?
