I know this has been somewhat covered before but.Should I be booting into 64-bit Snow Leopard?I have a 2008 Mac Pro with 16GB of memory.I mostly run Photoshop CS4, X-Plane, QuickTime 7 Pro, Compressor and FCP6.
I know you hold down the 6 and 4 keys but is anyone using either "Happy Cat", "K64Enabler 1.0.1", or "32- or 64-bit Kernel Startup Mode Selector 1.2.3" to enable 64-bit Snow Leopard?
I have a MacBook pro running Leopard (10.5.8). I am updating to a legitimate copy of Snow Leopard. I'm not installing from the discs, though. I made my flash drive a bootable disk, and I'm trying to install from the USB drive. I'm pretty confident that I did it correctly, but I am still having trouble. This is a brand new 8 gb flash drive. Using Disk Utility, I changed the drive to GUID Partition Table and formatted it to Mac OS Extended (Journaled). Then I restored my Snow Leopard .dmg to the flash drive. Everything seems to be going smoothly at this point. I clicked on "Install Mac OS X" in the newly created bootable drive, and after going through the next few windows it started installing. The progress bar increased to about 7%, which took probably five minutes.
After this, it stated something along the lines of "installation will continue after reboot," and then rebooted itself. When OS X started back up, it was like nothing had happened. No changes, no continuing installation, it was like the installation hadn't begun at all. I tried a second time and the same thing happened: partial install, reboot, then nothing but regular startup. The USB Snow Leopard Install Drive does show up in the list of bootable drives in the "Startup Disk" portion of System Preferences. Even when I select it as the startup disk and restart, OS X just boots normally almost like it's ignoring my direction to boot from the Snow Leopard install drive. When I hold "alt" during startup to select the drive to boot from, only the regular Macintosh HD is presented as an option.
I don't understand why it would show up in System Preferences>Startup Disk, but not show up when pressing alt at startup. I noticed in Disk Utility that the "Owners Enabled" option was set to "No," so I used Terminal to change that to "Yes," even though I'm not sure it makes a difference at all. I named the USB Drive "Snow" and entered the line 'sudo /usr/sbin/vsdbutil -a /Volumes/Snow' in Terminal to do change owners enabled to yes. So this is where I am stuck. From what I can tell, I think I created the bootable usb drive properly, but I can't seem to boot from it and running the install off of the drive while already logged into OS X halts at about 7% and reboots.
I have a SL install disk. In my Core Duo MBP I can insert it and it boots from it no problem. In the MBP i5 it refuses to boot. Â
The DVD is a Version 10.6, 2Z691-6558-A.Â
Info:
MBP, MM, MBP - 10.6 + Windooz XP on a hard partition
I have Snow Leopard installed on an 8GB Flash Drive. It works all good and fine. The only thing is I don't want to do an upgrade, I want to do a FRESH erase and install of my machine (macbook). I tried plugging in the USB drive and restarting the computer while holding down "c", this proved to not work.
Any way that I can erase the computer completely and fresh install from my USB drive?
I have an old macbook pro 15 inch from around late 2005. It has a Core 2 Duo processor with 2.4 ghz, etc. and installed snow leopard on it awhile back. Yesterday after running software updates, the computer won't boot. what I could do to get the update de-installed?
Info:
MacBook Pro, Mac OS X (10.4.11), 2 GB Memory 2.16 GHz Intel processor
i just bought a new uMBP 15 2.53 last night and i bought a Seagate 500GB 5400rpm HDD to replace the one on board. I installed the HDD and SnowLeopard install went through great but after install every time i boot up, it takes a long time on spinning gear. It eventually loads up but takes a while, I ran Repair Disk Permission and Verify disk and everything turns out fine. I even ran Apple hardware test on HDD and tests passes. I haven't installed 1.7 EFI Firmware since i've read that it doesn't work so well with third party HDD or doesn't work at all.
View 11 Replies View RelatedWhen I turned on my 13 inch Macbook this morning I got a black screen with the message "No bootable disk, insert startup disk and press any key". This has never happened to me before and I am wondering what the cause is and how to avoid it in the future. I got the system to start by pressing and holding down the option key.
View 1 Replies View RelatedI'm really new to OS X and macs in general. I just got the new macbook and I have Win7 professional 32bit on a dvd(legal). I have created a partition in bootcamp but every time it tries to boot from the dvd a black screen comes up with a flashing white cursor and thats it. Can anyone help me please as i really need win7 soon for college assignments.
View 2 Replies View RelatedI ran a disk check on my MacBook Pro which told me to run disk repair. Since this was my boot HD, I took out my Installation DVD, put it into the running system and started the installation file then selected that I wanted to reboot and start utilities. The system then rebooted, the "chime" came, and then, silence, gray screen with apple logo, nothing is happening. What do I need to do, to get further and repair my hard disk?
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.6.8)
I recently received a friend's iBook (G4 - not sure about other specs) and it isn't booting. The computer just hangs at the Apple logo when I try to boot from the hard drive.
So I decided the easiest way to fix it would be to simply take my retail leopard disc and install it on the machine (they don't need any data recovery). When I hold the option key the Leopard disc shows up fine, but after I select it and click the arrow to continue it just sits at the apple logo with a twirling loading icon. Anyone else had this issue? Any ideas?
Do I need to reset the system profile or something? Sorry I am an old-school mac newbie... my own machine is a MacBook and I'm much more familiar with it than this G4 iBook.
I recently purchased from a friend a Powermac G4. It was running Panther (i Think). Because it wasnt running all too well, I decided to give Leopard a go.
I had an extra copy of Leopard lying around, so I installed it. It booted up fine, and was working, until I restarted the computer. Now it doesn't boot up at all, and I get a grey screen with a folder with the mac symbol and a question mark on it. What have I done? And how to I fix it?
I have mac osx 10.5 leopard. I shut my mac down to move upstairs, then when I went to boot up again it didnt start. So I got the leopard cd and hold "c" at start up and it still stays at the grey screen!
I remembred a few hours prior to shutting down Imoved some of the default os x applications into a sub folder in my applications folder ( isync, address book, capture, etc). But this doesnt seem like that could of caused it?
What I have done already is restore my USB Flash Drive with a .dmg of Leopard using Disk Utility. The next step consists of booting Tiger into Leopard by holding down the option key at start-up and selecting my flash drive. The USB flash drive comes up on my computer as a Leopard Install DVD but when I hold in the option key during start up, I do not have an option for my flash dirve to boot.
View 11 Replies View RelatedI have a MacBook Pro that came with Leopard. I am wondering if it is possible for me to shrink my Leopard partition and then install Tiger on a second partition. I have seen a similar thread about starting with Tiger and then adding a Leopard partition, but I want to go the other way around.
Also, is it possible for me to do this without having to reinstall Leopard, such as making a partition with Boot Camp and then tweaking it with the Disk Utility in the Tiger installer?
I currently have my Macbook Pro (newest version as of Aug 09) set up with Windows XP and Leopard via Bootcamp. I don't use Windows almost ever anymore so I wanted to install Ubuntu on it. IE, just load Ubuntu over Windows. The windows partition is NTFS formatted.
Before I attempt this, I was wondering if there are any simple-to-use tutorials out there. I have some experience with Linux, but it was years ago. Why I want to get back into it and learn a new OS again.
I had a problem with apple macbook pro (core2duo,1Gb ddr2,80Gb HDD) laptop. I've erased my partition by accident, so the hdd was empty. then insert Dvd mac osx Leopard 10.5.2 to install it, partitioned the hdd as GUID partition table & formated with mac os extended (journaled). the install going smooth until finish, but when restart...it came back to boot from dvd. I turn of and put it on again with option button pressed, but only the dvd is the option to boot..
View 6 Replies View RelatedI sign in and when Safari opens, whilst Microsoft Messenger is downloading, the monitor screen vibrates between Safari and Messenger at a very, very, fast pace. Back and forth, back and forth, alternating between the two. When the booting process is completed the computer is fine. Everything is OK. Any know what is causing this, and what to do about it?
Info:
iMac, Mac OS X (10.5.8), 2.4 GHz Intel 2 Duo Pen
Can someone help direct me to the boot-up keyboard commands to mount the Mac when you see this icon on the screen:
http://www.harrisonburg.org/HHS/mac_screen.jpg
(circle with diagonal slash through - international"NO" symbol)
It's an Aluminum PowerBook G4 running the first Leopard OS/X system. Need to recover the valuable data on the drive, but won't boot. Beachball just spins and spins with this screen showing.
Lately, my MacBook's been popping-up window after boot that says, "Connection failed. The server may not exist or it is not operational at this time." I don't know what server my Mac is trying to connect to. How/where can I look to see what's trying to connect, and to shut it off from trying at boot?
View 8 Replies View RelatedEnvironment clones ( made by Leopard compatible SuperDuper and Carbon Copy Cloner) to two separate LaCie Firewire drives will not boot from those drives Leopard (10.5.6) running on an old 14" iBook G4 1.1 GHZ. Both SuperDuper and Carbon Copy Cloner declared the clones bootable, and they are selectable as Startup drives. All three drives (internal included) are partitioned using Apple Partition Map and OSX Extended Journaled. Has anyone met and solved this problem? BTW - I did read somewhere that Leopard is designed to use the GUID partition scheme; but this is of no use with a PPC Mac. Could this be the source of the problem?
View 6 Replies View Related... long time reader, first time poster!! So I'm doing it. I'm switching from PC to Mac. I've been waiting for a while now and the new MacBook Pro's have convinced me. I'm buying the 13 inch this week.
However I'm slightly worried about the upgrade to Snow Leopard in September.
My question is if I buy a new MacBook Pro this week and upgrade from the current version of Leopard to Snow Leopard will it be the EXACT same as the version of Snow Leopard that ships with new MacBooks after September?
Is the upgrade just the same as the full software version available post September? Does the upgrade it just detect if you have the previous software and installs as if it were the full? Or does it just "patch" things depending on what's different from previous versions?
I can wait till after Snow Leopard is released in September 09 if it is different to Leopard upgraded to Snow Leopard.
I am using an HP Color Laserjet 3505n. Will snow leopard work with this printer?
View 2 Replies View RelatedI have a Snow Leopard Install Disk for the 13-inch Macbook Pro model.I also have a 21-inch iMac. I have OS X Lion installed on both. I have Snow Leopard installed as a partition on my Macbook Pro, which I installed via the install disk. I want to do the same thing for my iMac but I am unable due to (seemingly) my install disk is for a Macbook Pro and not for an iMac.
Info:
iMac, Mac OS X (10.7.3)
I'm running Leopard 10.5.8 on an iMac and continuously have problems booting the machine. The boot process occasionally hangs at the gray screen, but more often it hangs at the blue screen. Sometimes it makes it to the login screen where the cursor occasionally freezes. Whenever these problems occur I have to shut down by holding down the start button, then restart again. Usually the second boot is successful. This booting problem occurs frequently, even after running Disk Warrior and repairing permissions. I don't think this is normal behavior. Has anyone else had such problems? Is there anything I can do to correct this behavior, or is this something that needs to be fixed by Apple?
View 7 Replies View RelatedG4 DP 450 booting straight to firmware command line and I'm not sure how to proceed from here. Unable to boot from CD.
View 4 Replies View Related"Photoshop CS" and "Acrobat 6.0 Standard" suddenly stopped working in my iMac, apparently after I upgraded it to MacOS 10.6.8 (the latest version of Snow Leopard). Both programs had worked normally until that OS upgrade. I deleted Photoshop CS and tried to re-install it from the original CD, but the installation never proceeds because I get an error message entitled: "Install Adobe Photoshop CS quit unexpectedly". This is the full error message:Â
Process:Â Â Â Â Â Â Â Â LaunchCFMApp [1516]
Path:Â Â Â Â Â Â Â Â Â Â Â /Volumes/Adobe(R) Photoshop(R) CS/Adobe(R) Photoshop(R) CS/Install Adobe Photoshop CS.app/Contents/MacOS/Install Adobe Photoshop CS
Identifier:Â Â Â Â Â com.MindVision.InstallerVISE
[Code]...
Today I performed a clean install of Snow Leopard on my late 2009 Mac Mini. After completing the installation, I began running software update to bring everything up-to-date.While software update did find and install a number of updates (10.6.8v1.1 Combo update, Security Update 2012-002, Apple Software Installer Update, iLife Support 9.0.4, Remote Desktop Client Update 3.5.3, Airport Utility, Java, Safari) it did not find an update for iTunes (which starts at version 9.x, I believe, in a SL clean install).I assumed that this was some sort of random glitch and manually downloaded and installed iTunes 10.6.3.After that, I re-installed iLife '11 (from a retail DVD, not the App Store).When I ran Software Update again, it found updates for Garage Band, iDVD, and iWeb, but it did not show the updates for iPhoto and iMovie.I found this to be unnerving, as I performed a clean install when I first obtained this Mini a few months ago and didn't experience any of these problems - all of my Apple software updated automatically through Software Update without a hitch.
I began researching this problem online and found that other people have been experiencing this same problem (or some variation of it), and it seems like it began appearing around the time Apple updated some of its security certificates in March.In particular, I've found several references to the missing iPhoto update.This one is especially noticeable because an iPhoto library created in iPhoto 9.2.3 will not open in iPhoto 9.0, and this generates an error upon opening the program (i.e., a user backs up their iPhoto library created in 9.2.3, performs a SL clean install, reinstalls iLife, goes through the Software Update process until it shows that no more updates are available, and are shocked to find that they are unable to open their backed up iPhoto library because they have an out of date version of iPhoto).The most common (and admittedly logical) solution proposed in the threads I've read is to download any necessary updates directly from the Apple website. However, I am curious as to why this previously functional feature now appears to be broken.Has anyone else been struggling with this? Does it indeed have something to do with the new security certificates? Is Apple aware of the problem?
Info:
Mac mini, Mac OS X (10.6.8)
I'm currently using a MBP 13 inch and am running Leopard on it.
I just bought a copy of snow leopard today but i don't know if I should do a direct upgrade from leopard to snow leopard, or wipe my MBP and do a fresh install so i have snow leopard on a clean slate.
Have any of you tried the second option before? Or do any of you have advice on which path I should take?
I have my drive partitioned between Tiger and Snow Leopard. I am trying to move myself over to Snow Leopard so I don't have to keep switching. The problem is that my old apps that alledgedly will work in SL, give me an error box when I launch them. It happens with Appleworks 6 and Quicken 2007. I've installed Rosetta but don't know what else to do.When I launch either application, it says it unexpectedly quit and gives this info:Â Process: [code]
View 13 Replies View RelatediMac with 2Ghz Intel Core 2 Duo, 4GB RAM, plenty of space available and currently operating 10.5.8. Now I want to upgrade to Snow Leopard and since my Mac Mini came with it, I attempted to use the OSX install disc from the Mini in the iMac. I don't see a reason why this shouldn't work. There's no DRM or anything as far as I know. I'm just trying to bridge the gap so I can download Lion. I've looked into some of the advice others have given on this subject but my computer doesn't have those issues. I've tried booting from disc but I get the same message.
Info:
iMac, Mac OS X (10.5.8), iPhone 4
