I have Snow Leopard installed on an 8GB Flash Drive. It works all good and fine. The only thing is I don't want to do an upgrade, I want to do a FRESH erase and install of my machine (macbook). I tried plugging in the USB drive and restarting the computer while holding down "c", this proved to not work.
Any way that I can erase the computer completely and fresh install from my USB drive?
I have a MacBook pro running Leopard (10.5.8). I am updating to a legitimate copy of Snow Leopard. I'm not installing from the discs, though. I made my flash drive a bootable disk, and I'm trying to install from the USB drive. I'm pretty confident that I did it correctly, but I am still having trouble. This is a brand new 8 gb flash drive. Using Disk Utility, I changed the drive to GUID Partition Table and formatted it to Mac OS Extended (Journaled). Then I restored my Snow Leopard .dmg to the flash drive. Everything seems to be going smoothly at this point. I clicked on "Install Mac OS X" in the newly created bootable drive, and after going through the next few windows it started installing. The progress bar increased to about 7%, which took probably five minutes.
After this, it stated something along the lines of "installation will continue after reboot," and then rebooted itself. When OS X started back up, it was like nothing had happened. No changes, no continuing installation, it was like the installation hadn't begun at all. I tried a second time and the same thing happened: partial install, reboot, then nothing but regular startup. The USB Snow Leopard Install Drive does show up in the list of bootable drives in the "Startup Disk" portion of System Preferences. Even when I select it as the startup disk and restart, OS X just boots normally almost like it's ignoring my direction to boot from the Snow Leopard install drive. When I hold "alt" during startup to select the drive to boot from, only the regular Macintosh HD is presented as an option.
I don't understand why it would show up in System Preferences>Startup Disk, but not show up when pressing alt at startup. I noticed in Disk Utility that the "Owners Enabled" option was set to "No," so I used Terminal to change that to "Yes," even though I'm not sure it makes a difference at all. I named the USB Drive "Snow" and entered the line 'sudo /usr/sbin/vsdbutil -a /Volumes/Snow' in Terminal to do change owners enabled to yes. So this is where I am stuck. From what I can tell, I think I created the bootable usb drive properly, but I can't seem to boot from it and running the install off of the drive while already logged into OS X halts at about 7% and reboots.
When installing Snow Leopard, will it erase my hard drive and force me to start all over or will it just update the software and keep everything the way it is on my Mac now?
View 6 Replies View RelatedIs it possible to install Snow Leopard from a disc image on an external drive?
View 7 Replies View RelatedI am having problems with my I-Mac. It is the 2.8GHZ 24" model and when I try to start it up I get a white screen with a blinking grey file folder with a "?" mark in it??
I had this problem before. Erased the hard drive and then reinstalled everything. I made it through it but I think I may have done it wrong. Anyways the computer worked good till the other day. I upgraded to Snow Leopard and now it is doing it again.
Do I need to start with the install disk 1 that came with the computer and install disk 2, then install snow leopard? Or can is there a faster route of doing this?
Can i install snow leopard straight to a firewire drive?
If so what is the best way to do this? i don't want to just clone the internal drive to the firewire drive, i want a clean install to play with.
I have a white shell Fall 2007 (Santa Rosa) Macbook with a 120gb 7200 RPM hard drive. I bought a new 320gb hard drive and snow leopard today and want to ensure that I won't lose anything if I back my hard drive up as a "regular leopard" machine and then try and recall the files after installing the new drive as a "snow leopard" running system.
View 1 Replies View RelatedMy newly acquired "ibook G4 1.33ghz 12 inch" is having problems booting just after recently insatlling a brand new WD Scorpio Blue 160GB hard-drive. I installed myself with the very useful [URL] tutorial which ran through the process quite simply. Basically the background story here is, I was given the ibook by a friend of mine who didn't want it as she didn't have the patience, money and time to invest into having it fixed. Some three years ago she dropped it from her coffee table and since then the hard-drive started failing, getting louder and slower to eventually one day not switching on at all. She took the ibook to an Apple Genius bar in LA where they ran diagnostics and resulted it with having a failed hard-drive.
She never had it repaired and has since been keeping it stored away as a spare. She was kind enough to gift it to me, I was well up for the challenge to repair it so here I am!! So, I bought a new hard-drive, successfully installed it and then the moment of truth, the ibook DID switch on, this itself was good news. But ever since I haven't been able to progress any further, as when I switch the ibook on it makes the apple start-up sound then goes to a white screen and says this:
Invalid memory access at SRR0: ff8486a4 SRR1: 00003030
Apple PowerBook6, 7 4.9.3f0 BootROM built on 07/05/05 at 11:14:11
Copyright etc.
Then says:
To continue booting, type "mac-boot" and press return
To shut down, type "shut-down" and press return
Reducing system power
So if I type "mac-boot" it goes to a grey screen with a folder icon in the middle containing a little 'finder' face and a flashing question mark, and then if left for about 5 minutes or so it just switches itself off. Of course it occurred to me that there is nothing on the new hard-drive so it can't boot from anything, I tried using my intel mac's start up disk which has OSX tiger on it, but this doesn't give any better results, I start-up holding C and I here the disk being read but it can't boot from it, it still goes back to the OpenFirmware screen as above.
i was wondering if it is possible to install snow leopard without a superdrive or the remote disc utility, but from an external hard disk drive which the snow leopard files have been put on.i have already googled to the end of the world. no success so far.
View 12 Replies View RelatedI know this has been somewhat covered before but.Should I be booting into 64-bit Snow Leopard?I have a 2008 Mac Pro with 16GB of memory.I mostly run Photoshop CS4, X-Plane, QuickTime 7 Pro, Compressor and FCP6.
I know you hold down the 6 and 4 keys but is anyone using either "Happy Cat", "K64Enabler 1.0.1", or "32- or 64-bit Kernel Startup Mode Selector 1.2.3" to enable 64-bit Snow Leopard?
I have a SL install disk. In my Core Duo MBP I can insert it and it boots from it no problem. In the MBP i5 it refuses to boot. Â
The DVD is a Version 10.6, 2Z691-6558-A.Â
Info:
MBP, MM, MBP - 10.6 + Windooz XP on a hard partition
I have an old macbook pro 15 inch from around late 2005. It has a Core 2 Duo processor with 2.4 ghz, etc. and installed snow leopard on it awhile back. Yesterday after running software updates, the computer won't boot. what I could do to get the update de-installed?
Info:
MacBook Pro, Mac OS X (10.4.11), 2 GB Memory 2.16 GHz Intel processor
i just bought a new uMBP 15 2.53 last night and i bought a Seagate 500GB 5400rpm HDD to replace the one on board. I installed the HDD and SnowLeopard install went through great but after install every time i boot up, it takes a long time on spinning gear. It eventually loads up but takes a while, I ran Repair Disk Permission and Verify disk and everything turns out fine. I even ran Apple hardware test on HDD and tests passes. I haven't installed 1.7 EFI Firmware since i've read that it doesn't work so well with third party HDD or doesn't work at all.
View 11 Replies View RelatedWhen I turned on my 13 inch Macbook this morning I got a black screen with the message "No bootable disk, insert startup disk and press any key". This has never happened to me before and I am wondering what the cause is and how to avoid it in the future. I got the system to start by pressing and holding down the option key.
View 1 Replies View RelatedI'm really new to OS X and macs in general. I just got the new macbook and I have Win7 professional 32bit on a dvd(legal). I have created a partition in bootcamp but every time it tries to boot from the dvd a black screen comes up with a flashing white cursor and thats it. Can anyone help me please as i really need win7 soon for college assignments.
View 2 Replies View RelatedWhat I have done already is restore my USB Flash Drive with a .dmg of Leopard using Disk Utility. The next step consists of booting Tiger into Leopard by holding down the option key at start-up and selecting my flash drive. The USB flash drive comes up on my computer as a Leopard Install DVD but when I hold in the option key during start up, I do not have an option for my flash dirve to boot.
View 11 Replies View RelatedEnvironment clones ( made by Leopard compatible SuperDuper and Carbon Copy Cloner) to two separate LaCie Firewire drives will not boot from those drives Leopard (10.5.6) running on an old 14" iBook G4 1.1 GHZ. Both SuperDuper and Carbon Copy Cloner declared the clones bootable, and they are selectable as Startup drives. All three drives (internal included) are partitioned using Apple Partition Map and OSX Extended Journaled. Has anyone met and solved this problem? BTW - I did read somewhere that Leopard is designed to use the GUID partition scheme; but this is of no use with a PPC Mac. Could this be the source of the problem?
View 6 Replies View RelatedI ran a disk check on my MacBook Pro which told me to run disk repair. Since this was my boot HD, I took out my Installation DVD, put it into the running system and started the installation file then selected that I wanted to reboot and start utilities. The system then rebooted, the "chime" came, and then, silence, gray screen with apple logo, nothing is happening. What do I need to do, to get further and repair my hard disk?
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.6.8)
I have a tower Mac Pro with Snow Leopard running on it.Unfortunately one of the software that I use doesn't have yet a Snow Leopard update. So I am thinking maybe I can install older version of Leopard on one of the internal drives (i have 3 additional internal drives), so I can boot my computer from either Leopard or Snow Leopard, depending on needs (i don't want to get rid of Snow Leopard).
I never installed OS X system before, so I am a bit scared.The internal drive is ready, I have the old Leopard on disks, what are the next steps to take?
Question in the title - just wondering if I will need to upgrade to Leopard before Snow Leopard.
View 3 Replies View RelatedHey peeps. I got my retail copy of Snow Leopard. Unfortunately, my Super Drive seems to not read Dual layered DVD's (including Snow Leopard, my regular Leopard, etc) Is there a way I can install booting from a USB drive? Or a Firewire drive?
View 2 Replies View RelatedIm having a few problems with my new instal of snow leopard
1. When ever i shut my mac down and restart it says insert a bootable disk, i have to then restart again and hold down, the alt button and manualy select the macintosh hd
2. Time machine is taking longer o backup, and icon on the menu bar is always grey and not black.
3. system is running extremely slow
Well in my quest to upgrade my MBP 5,1 I got my memory and a 500 GB Seagate Momentus XT from Newegg. I'm enjoying 4 GB of RAM now. So, I'm debating with myself about what to do. Obviously, a new HDD is a great opportunity to install Snow Leopard and start from a clean slate. Or I was thinking about cloning my current Leopard install to an external HDD with CCC, but I'm having trouble understanding how I would accomplish getting it back. I'm thinking you can do this by booting from the install disc, but I'm not sure. So, if I go the SL route, will I be able to use Migration Assistant and an external enclosure (if anyone could recommend one, that would be great!) for the old boot drive to move my important stuff over?
View 9 Replies View RelatedI have a MacBook Pro running 10.6 and a Mac Pro running 10.5.8.
Can I install 10.6 on the Mac Pro from the Installation DVD that came with the laptop or does Apple require me to buy the software twice?
Info:
Logic Pro, Mac OS X (10.5.8), Mac Pro 8 core/ Apogee Rosetta 800
Some weeks ago I accidentally deleted the app x11 from my iMac (I have the version 10.6.8). Now I am trying to install a game that needs that app. I've tried to download and re-install the x11 from the Apple website, but when I'm installing it, a message shows up saying that "x11 can't be installed. a more recent version of this software is already installed". but that's impossible, since I deleted it! I've been looking through my iMac with the Finder and the app x11 doesn't show up, so it is definitely not in my computer. What can I do to install the x11 in my iMac again? I don't think it's possible that the app still remains in my computer.Â
Info:
iMac, Mac OS X (10.6.8)
I'm trying to install Mac OS X Snow Leopard on to my macbook but I keep getting this error.
"mac os x installation couldn't be completed" I get this message usually within 5 minutes of installation.
My macbook specs are...
Mac OS X Version 10.5.8, 2.16 GHz Intel Core 2 Duo, 1 GB 667 Mhz DDR2 SDRAM
I've already tried repairing the disks. (I repaired my leopard with the snow leopard CD because I couldn't find the leopard CD.
I heard it was fine to do.) I would have tried to verify and repair the partition but the buttons seemed to be grayed out for some reason.
Here is the error log...
[URL]
(sorry for the download, forum rules. "the text that you have entered is too long (123483 characters). Please shorten it to 20000 characters long.")
Will it install like the OS does on the iPhone, as in the existing data isn't put in a new folder? What exactly happens when you install a new OSX?
View 1 Replies View RelatedAfter 5 years with 10.3.9 on an iBook, I've bitten the bullet and bought one of the new iMacs. The transfer has gone fairly well, but I'm having trouble moving my address book and keychain data across to the new machine.
They didn't come across using the Migration Assistant: the Snow Leopard Keychain won't accept anything exported from the Panther version. If I export the address book as V-cards from the old system (the only means of export, the new systems asks me whether I really want to import n cards, but after I say yes nothing appears in the bbok.
It's al very frustrating, (and not very Apple-like!) I'm on the verge of doing the whole thing manually, one address and one keychain entry at a time, which seems quite daft.
I just replaced the hardrive in one of my macbooks. i am trying to load snow leopard on it and it just skips through the installation and says Intallion failed?
anyone have any thoughts. i am installng it from an external harddrive!
I've read it is possible to partition your hard drive so you can have leopard and snow leopard installed at the same time on one computer, correct?Can I partition my current drive without having to reinstall leopard? or lose any data? I will of course have a back up but is it possible to create another partition if I have room while keeping my leopard install intact?If later I decide I love (or hate) snow leopard can I get rid of the other partition and expand one of the partitions to take up the entire hard drive (like how I have it now) again without reinstalling or losing data? (on the partition I intend to keep not the one i get rid of obviously)
View 6 Replies View Related