Im going to be cloning My HDD in the near future, and Im going to be making a bootable clone. My one Question is whether or not my VM's will be cloned as well, and will be fully operational after the clone is complete?
View 3 Replies
I am trying to do clone the system only from my current hard drive to a smaller internal SSD. Tried with SuperDuper but the resulting drive was not bootable even though it had the system folder. Has anyone done this successfully?
View 3 Replies View RelatedI am going to upgrade to Leopard. What size external hard drive do I need to make a bootable back up of OS X beforehand?
View 4 Replies View RelatedI have a MacBook Pro running OSHave been trying to create a bootable CD. Have found a number of ways on the net of doing this using Toast, BootCD, DiskCopy, etc. But every one requires the system folder from an original Mac OSXCD. 2 installation disks came with my MacBook, Install Disks 1&2. I can find a system folder, but it contains thousands of folders. I must be missing something.
View 3 Replies View RelatedI have been a user of SuperDuper! for some time and understand the process of making a bootable clone of my startup drive. The other day, my bootable backup drive crashed. It was an Iomega that had been partitioned and worked fine as a bootable backup until the drive itself failed. The Iomega was a Firewire 400 drive.
When I bought a replacement, I bought a Western Digital FW 800/400, USB 2, eSata connection system. 1 TB. I partitioned it and created a bootable clone with the latest version of SuperDuper! The operation went smoothly until I tried to actually boot from the newly created clone. I could select the clone from the Startup Disk panel, but my Mac refuses to boot from it. It looks, then says, "Hmmm! I think I'll start up from the internal drive." I have another WD FW 400, USB 2.0 drive and it is bootable as well as a LaCie FW 400 that I can make bootable. Only this one drive that has no specific FW 400 port will not boot. I tried it as FW 800, no dice. I connected with the adapter cable to the FW 400 port, no joy.
I can return this WD drive for exchange. My question is should I expect the same results if I exchange it for another drive of the same type? Or is there a chance that a new drive of the same type will work?
PowerMac, dual G5 2 Ghz, OS X 10.4.11. It has a FW 800 port as well as FW 400.
On my new MBP I fired and set-up the system, and SL was already installed.
I followed the procedure of cloning my Leopard HD on to a local back-up drive, using CCC, plugged it in to the MBP and booted from the clone.It has booted up without any noticeable issues but when I go to open Disk Utility, or any other program on the cloned disk, I get the '...application X quit unexpectedly' dialogue box
I just recently purchased a Macbook, and I created a bootable backup of the system. The macbook boots from the backup, but when I try to boot from the backup on our G5 and also our Powerbook G4 it will not work. The G5 does not even see the bootable partitions I created, and the G4 sees them, but when I select the partition to boot from, the computer just restarts and boots from the Powerbook hardrive. We are having to send the Macbook back for some small power issues, and we need a bootable backup of this sytem that works. Does this have anything to do with the fact that the Macbook is an intel based computer and the Powerbook G4 is not? Also, the macbook is running Snow Leopard, and the Powerbook is on Tiger.
View 4 Replies View RelatedI created a bootable usb drive on a windows pc using windows 7 to install windows 8 preview and want to make a copy to install in virtualbox on my imac and burn to a dvd that will work on pc.
I've tried using disk utility to create an image and get a file ESD-USB.dmg, but virtualbox won't boot a dmg file.
I tried converting it in the terminal with:
hdiutil convert -format UDRO -o windows8.iso ESD-USB.dmg
but the resulting file was windows8.iso.dmg. I changed the name to windows8.iso, but even so, virtualbox complains it's unbootable.
I tried the terminal command:
dd if=/dev/disk4 of=windows8.iso
but virtualbox complained that it's not bootable.
I tried the terminal command:
cat /dev/disk4 > windows8.iso
but virtualbox complained that it's not bootable.
Info:
iMac, Mac OS X (10.7.4)
Since about the 3rd day after I got my macbook pro the computer has been making cracking sounds when I open it. When it first started it just simply made one clicking sound when the hinge is halfway open. Now however, When it is open it makes cracking sounds that don't stop ( open 15 cracking sounds per open). Is this a serious issue that I need to address with my local (and very mean) genius or is this issue not going to continue to get progressively worse. If this does continue to get worse will the hinge crack open? what is this worst that could happen?
View 11 Replies View RelatedI recently transferred or am in the process of transferring my old info from a Mac Pro Tower to a new 2.8 i7 MBP. Previously, I had a 40GB SSD drive with my OS and Apps and it ran perfectly fine, however I needed more space. I ended up buying a Crucial M4 128GB SSD and upgraded the RAM to 16GB and have since had problems with the Crucial. I just now updated the firmware but that didn't seem to fix a thing.So what I've done is initialized the M4 SSD w/ Disk Utility via Mac OS Extended (Journaled) and I've done a clone using Time Machine (it worked but it was really slow and would occasionally lag for 30 seconds out of nowhere with a beach ball) and I've also done a clone using Carbon Copy and that was ridiculously slow (I would get a beach ball every 5-10 seconds and just opening a new window in the finder would cause a beach ball).
I don't know what could be the problem. I've since made a bootable SD card with both Leopard and Lion, thinking I'd just install a brand new OS onto the new SSD, but those aren't working for some reason.So yes, I'm currently using the previous and well-working 40GB SSD, but I'm lost
Info:
MacBook Pro, Mac OS X (10.6.8)
I am upgrading my MBP first gen unibody to an SSD drive. I just read that we should not clone an existing HDD to a SSD. The author did not give a reason why. So, my question is: will cloning my current HDD to a new SSD (using Super Duper) adversely affect the SSD performance? My initial plan for upgrading before reading this article was to clone my HDD to a new SSD in an enclosure (using Super Duper), then install the SSD. I thought this would save me a lot of effort restoring everything from scratch.
View 16 Replies View Relatedi need to clone and replace my internal hard drive. it's 150 GB and almost full, so I'm replacing it with a Seagate 500 GB so I can upgrade from Os x 10.4 to Snow Leopard, and generally have TONS more space
I'm attempting to do the cloning in Disk Utility- I've got the new internal hard drive connected via USB right now, however when i select it as the destination, the 'Restore' option remains greyed out...
I imagine I need to format my hard drive, however I impulsively clicked 'New Image' and it began creating a disk image of the new hard drive...
When I first got my Macbook Pro I cloned a 250Gb in the result of a major crash. Since then it has been sitting in a 2.5 enclosure in my drawer. I never imagined that I would use as my primary drive, it was just an afterthought. I wanted to switch to a larger drive and I was going to clone it to save time. Has anyone run into issues with a clone as their primary drive? In short is a cloned drive going perform the same as a fresh install?
View 3 Replies View RelatedI have a problem of a slow boot (3-4 minutes) with my MacBook Pro. Bought my first iMac 27" in December 2013 and going great. Decided to buy a 13" MacBook Pro retina with ssd in May and thought I would clone my iMac to the Pro. Before cloning Pro would boot up fast but after the clone it takes 3-4 minutes.
View 3 Replies View RelatedI just purchused a Hitachi 500GB Travelstar internal HD to replace the 250GB HD and I have a few questions about the directions on cloning. Do you need a FireWire or USB enclosure for the new drive? Do can you use disk utility or do you have to use a program like carbon copy cloner or super duper?
View 3 Replies View RelatedWould there be any problems cloning the SSD of a 13" MacBook Pro over to the SSD of an 11" MacBook Air?
The SSD is a 240GB OWC (only 80GB used) and I'm getting the 128GB MBA.
Are there issues cloning and transferring between different systems?
I use my iMac for my media business, however I will be on the road more this year, and so I was going to put all my files, apps etc over to my work's MacBook so I can get things done for my clients while I'm on the go. Of course the thing is all my apps, files etc are lodged in the iMac, so I thought that the only way to avoid manually reinstalling stuff (and then have to move it all back to the iMac again) was to clone the user account or drive? Is there a way that this can be done?
View 16 Replies View Relatedsorry if this has been asked; I tried searching.Anyway, I just bought a larger capacity hard drive and am not sure how to copy the stock 160GB 5400RPM one.Do I need to have some sort of connection to the new hard drive?Is there any way to copy it without having to buy some kind of peripheral?I also have an external hard drive.Would my best bet be just backing everything up and just set up the hard drive as new and just restoring everything??
View 5 Replies View RelatedIs there a program or thing I can do to share apps between my iMac and Macbook? I have heard of cloning the HD as another way of doing it? How does this work? Is this even legal?
View 3 Replies View RelatedSo my hard drive just broke. Like a fool I accidently dropped it this morning and this means it cant be booted. I've tried everything I could find on reviving the thing but nothing has worked. However, after leaving it on the grey Apple booting screen for a good hour or so it finally managed to get to the desktop but was still going slowly. My macbook is able to boot of my external hard drive and I've checked the RAM and it's fine, which leaves me to believe that it's a problem with the hard drive itself.
Now the issue is that my external hard drive is only 160GB and my internal (now broken) one is 500GB with around 300GB of stuff on it (yes I do need it) and I don't want to have to lose it all. So is there any way of getting my currently broken hard drive and putting its data onto a new one? My idea is to take it out, install the new one and use the broken was as an external and do it like that.
I think it will work, but if it won't, it would be superb if someone more knowledgeable than I could tell me so
Step 1:
Buy 2.5" external Firewire 800 hard drive enclosure
Buy 2.5" SATA drive (probably 500gb WD Black or something)
Step 2:
Whack new drive into new enclosure and fire it up
Step 3:
Clone my existing 250GB internal MBP hard drive to the new one in the enclosure using Carbon Copy Cloner etc
Step 4:
Remove new hard drive from enclosure and use it to replace the internal hard drive in my Mac
Step 5:
All being well stick the old hard drive in the enclosure and use it as an external
I've just bought a new 500GB HD to put into my MacBook Pro. I was wondering is it possible to use my Time Machine backup drive to clone my existing drive onto the new 500GB drive? Then everything should be exactly how it already is?
View 14 Replies View RelatedI was wondering if there is anyway to pretty much copy a Vista partition on a Thinkpad T500 (university Laptop) onto a bootcamp partition, I would need to clone it because my university doesn't give us install discs, they load the OS on the laptop's as a image with all the program specific software, this would help because then I can use my mac for both OSX and class work.
View 11 Replies View RelatedI have a white macbook which I purchased in 2007 ( it is the version that only goes to 2MB of Ram total). In anycase I have a Hard Drive that i want switch into it. The question I have is there any benefit to just reinstalling a fresh copy of Leopard vs using a cloning software (SuperDuper or Carbon Copy)? Here is why I ask:
I cant remember ever defragging the current drive ( if that possibility even exists in Leopard.
I dont remember running any system tool like utility.
I have basically kept computer on ( or on sleep) for the time Ive used it. It is the best computer i have ever had. It is VERY low maintainance.
So with that said....does cloning copy over every characteristic ( an fragmented drive...slowness {of which none really exists}....or the time to launch the OS when it is rebooted)?
With all of this said, I dont use this computer for much storage. I have a couple of MP3s on there which can be ported off of there with a USB flash drive....and a couple of documents. Everything else is pretty much expendable.
I dont know...something tells me that its just better to freshly install the OS.
think this guide will be useful to anyone looking to install an SSD to accompany a larger capacity drive but is a little unsure how to tackle the cloning/file organization side of things with two drives.
View 1 Replies View RelatedI used a program called carbon copy cloner to make a clone of my father's mac book pro onto an external hd usb. I already erased the laptop so I can't go back too it for another copy so I'm stuck.
Anyhow, all the data copied over nicely. However it said it will make the drive bootable. But it does not. I partitioned GUID so it should boot cuz intel macs can boot usb if partitioned GUID. But it won't boot on the macbook pro intel or my mac mini intel. Both core duo (not 2 duo). And I can't reinstall because the dvd is 10.5.0 and we have 10.5.8 on the external.
Unless there is a way to remove 5.8 and go back to zero but I don't hink so. I did Disk first aid and it says the drive is fine. It is brand new. And it won't let me verify or repair permissions. Don't know what to do.
I've recently bought a used macbook air 2010 model and i've been trying to bootcamp windows 7 onto it. as you know the air doesn't have an optical drive so i have a windows 7 iso mounted on a usb drive.
note that this is my first time using osx.
the steps i've taken so far are as follows:
-Run Boot Camp Assistant
-Downloaded latest Windows support software onto a separate usb stick.
-Set up the desired partitions
The windows 7 usb drive is plugged in and when i click "install", it says the installer cannot be found. I've searched online for solutions but none succeeded.
Info:MacBook Air, Mac OS X (10.7.4)
I just upgraded my daughter from last year's MacBook to a new 2009 MacBook Pro (my mother will get her old one) by cloning the drive using SuperDuper. Everything works fine except it doesn't detect the audio hardware in the OS. I see that the new macbook pro has different audio hardware according to system profiler. Is there a way to copy the driver off the install DVD or should I just go ahead and reinstall everything.
View 2 Replies View RelatedAfter I replace my super drive with Hitachi 500G 2.5mm HDD, I can not boot except I hold the option key and manually selecting OS X to boot. I think if I am able to reset HDD as 1st boot device as HDD like modifing BIOS in windows machine, it might help, how I don't know how.
View 1 Replies View RelatedWhen I start the Mac the text "No bootable device, insert boot disk than press any key". Is it because I tried to install XP? If I put xp in my superdrive it starts the installing guide but I've tried to delete this partition.
View 1 Replies View Related
