MacBook :: Cloning A Broken Hard Drive?
Mar 28, 2012
So my hard drive just broke. Like a fool I accidently dropped it this morning and this means it cant be booted. I've tried everything I could find on reviving the thing but nothing has worked. However, after leaving it on the grey Apple booting screen for a good hour or so it finally managed to get to the desktop but was still going slowly. My macbook is able to boot of my external hard drive and I've checked the RAM and it's fine, which leaves me to believe that it's a problem with the hard drive itself.Â
Now the issue is that my external hard drive is only 160GB and my internal (now broken) one is 500GB with around 300GB of stuff on it (yes I do need it) and I don't want to have to lose it all. So is there any way of getting my currently broken hard drive and putting its data onto a new one? My idea is to take it out, install the new one and use the broken was as an external and do it like that.
View 1 Replies
ADVERTISEMENT
Sep 19, 2009
On my new MBP I fired and set-up the system, and SL was already installed.
I followed the procedure of cloning my Leopard HD on to a local back-up drive, using CCC, plugged it in to the MBP and booted from the clone.It has booted up without any noticeable issues but when I go to open Disk Utility, or any other program on the cloned disk, I get the '...application X quit unexpectedly' dialogue box
View 15 Replies
View Related
Mar 31, 2012
Recently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive). After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
View 1 Replies
View Related
Jan 1, 2010
sorry if this has been asked; I tried searching.Anyway, I just bought a larger capacity hard drive and am not sure how to copy the stock 160GB 5400RPM one.Do I need to have some sort of connection to the new hard drive?Is there any way to copy it without having to buy some kind of peripheral?I also have an external hard drive.Would my best bet be just backing everything up and just set up the hard drive as new and just restoring everything??
View 5 Replies
View Related
May 16, 2009
I have a Mac Book Pro core duo with a partition running windowsXP pro. The hard drive is almost completely full. I want to replace the drive with a larger drive and clone the current drive. Is there a way to completely clone the drive complete with the partition, boot camp, windows etc? I'm running mac os 10.4.11
View 3 Replies
View Related
Dec 17, 2009
what's the best way of cloning the hard drive? Since I have Snow Leopard, Windows, and Ubuntu on here, I could use Time Machine for SL, WinClone for Windows, and something else for Ubuntu. Is there anything that could make an exact copy of the hard drive (including the partitions)?
View 1 Replies
View Related
Mar 25, 2009
My OS is 10.3.9 and I have my int. Hd cloned to a F/W ext. HD for back up. Normally I re-clone every month or two. Up until now when re cloning I've just thrown the old cloned Ext. HD into the trash, then empty, to make space for the new clone. This system "Seems" to work, as after a RAM crash, when looking for a solution I wiped the int. HD before I found it was a Ram problem. Finally I just replaced the RAM and rebooted from the Ext. HD then re-cloned back to the int HD. And everything is working fine. But now I'm wondering if just throwing the stuff into the trash is "politically correct?" If not, what is the correct procedure.
Pismo G3 10.3.9 // Iomega FireWire Ext. HD (partitioned)
Clone app/ CCC
View 2 Replies
View Related
Mar 10, 2012
I have an IMac 20 inch 2007 model. I have filled my hard drive up. I would like to clone and replace the hard drive?
Info:
iMac, Mac OS X (10.6.8)
View 1 Replies
View Related
Jan 10, 2009
ok so my hard drive broke on my macbook. I got a new one put into my macbook and it works fine, but now i have a broken hard drive sitting at my house.. . what is something fun i can do with this ?
View 6 Replies
View Related
Dec 23, 2010
I want to do some upgrade things with my macbook and need to know if all is correct.My current internal hd is 80gb. I'm on 10.4.11. I plan on going to Snow Leopard but I want to keep my 10.4.11 system too to use. Almost 2 year old intel macbook.
I have superduper. I just got a new 500gb drive for the macbook. I also got a usb external 2.5" enclosure. I haven't done anything yet.What I want to do.... I want to partition the new hd into two. Probably 120gb to clone my current system on (with some room for growth) and the remainder to do a whole new fresh install + various applications of Snow Leopard.
Firstly, is it OK for me to have two separate OS's to boot from?
Secondly, cloning procedure.... should I take out my current hd and put it into the external enclosure, then put in the new hd, then boot from my former drive via usb and clone it onto the newly installed drive?
OR...put the new drive first into the enclosure, clone my system onto it, then switch out the drives? Does it matter which way?
Thirdly, since I'm not going to be doing any upgrading of my 10.4 system to SL....I'm leaving it intact as is.....and then doing a completely new install of SL....is there anything weird I should look out for. I dunno....my admin account...or not being able to have Logic installed more than once on the same machine...or anything else I should be aware of?
View 1 Replies
View Related
Jul 15, 2009
I have today received my shiny new macbook pro - very excited!I currently have a macbook, and I previously upgraded the hard drive to 320 GB (same as the new Macbook Pro). What I wanted to do was just swap the hard drives - however when I put the macbook hard drive in the macbook pro it didnt boot. Pressing ALT on startup it sees the hard drive but just hangs (doesnt even show the apple sign).I dont have all the application disks so dont really want to start from a fresh install - I was thinking of cloning the disk with super duper, but that probably will have the same effect of swapping the disk!
View 2 Replies
View Related
Mar 1, 2010
I have a 250 GB disk in my MacBook Pro, and I would like to buy a bigger one (500 GB, probably). In my previous experience from the Windows environment, there was an application called Norton Ghost, in which you could easily clone the disk, and when the cloned one was inserted into your PC, the OS could not tell the difference. Is there something similar for the Mac OS X, so that I can replicate my hard drive and thus install the new one in my Macbook without any hassle? I know that Time Machine is a possibility, but after restoring my system through TM once, I found out that after the restore there were some minor additional steps that had to be taken; however, the cloning technique means that you plug your disk and you are ready to go, so this is what I am looking for. I have one more additional question: I currently use a 500 GB external firewire disk for Time Machine. Will its size be sufficient for backing up the new 500 GB drive?
View 7 Replies
View Related
Dec 10, 2009
I recently bought a MBA but after some months the HD gave up. So I bought a generic Samsung HS082HB 1,8" zif HD to replace the broken HD. I thought I bought the right one but my MBA wasn't able to recognize the new HD. This new HD is a generic Samsung while the original was the one with the apple () printed on the label. So I ask you: do I need the certified one or did I miss something in replacing the HD?
View 4 Replies
View Related
Jan 22, 2010
I purchased a first generation 15'' MacBook Pro. My hard drive had crashed, so I backed up all my information and installed a new hard drive. Everything worked fine for about two weeks until the contact area between my power cord and the computer started to smoke. I've no longer been able to turn on my computer. I've had strange issues with my non-warrantied MacBook--including having to replace the battery four times over my three years of owning it and twice having to replace my power adapter (as it literally caught fire twice).
I've since given up on the MacBook Pro and purchased a new cheap laptop. However, I've got lots of important files on that brand new hard drive I put into my laptop. As I'm assuming the hard drive itself is still functional, I want to know how I could remove it and obtain my data. Do any of you know what sort of chassis I could purchase in order to essentially use my MacBook Pro's hard drive as an external drive to obtain these files?
View 3 Replies
View Related
Sep 3, 2014
My macbook suddenly crashed and I had to do a forced shutdown. When I tried to turn it back in, a folder with a question mark kept flashing and by computer did not start. I looked up what might have been the cause of this, and I found out it was my hard drive or the cable that connects the drive to the mac. But I brought it to my school since they have tech support and they said that my hard drive is pretty much dead, but it can still be possible to retrieve the data from. I need to hand in my Extended essay in about one week and I already had done quite a lot for my essay. how to get all my data back, or past it to a new hard drive.
Info:
MacBook Pro, Hard drive might be broken
View 2 Replies
View Related
Sep 8, 2014
I have a 2011 macbook that has a motherboard that is broken, and that macbook has a terabyte Hard drive that was put in about a year ago after a broken hard drive was removed. Now I have bought a brand new macbook same model and I was advised by the apple store to take the old TB hard drive and swap it with the one in the new computer. I just want to know if by doing this I'm going to loose all of my files and programs by just swapping them. I have no back up anywhere just the files on the hard drive in the broken computer. So am I going to loose all of the files on the hard drive when I swap it? or will I have to get it backed up some how? They are both running Mavericks Â
Info:
MacBook Pro, OS X Mavericks (10.9.4)
View 2 Replies
View Related
Aug 27, 2010
I have an external hard drive with lots of media files, and now I backed this up to an identical external hard drive. I wanted to use Carbon Copy Cloner to mirror any changes made in the original hard drive, but I have now tried this for the first time, after having moved some files around. Now instead of moving those files on the other hard drive, CCC just copied these files from the original hard drive, something that takes much longer. Is there any program that could do this more intelligently? (moving files on the backup drive instead of copying them over from the original drive again?)
View 4 Replies
View Related
Mar 6, 2009
Clearly there must be a way to do this, right? Can I install off an external hard drive? Off a USB drive? Share my macbook pro's DVD drive somehow? If the hard drive on the mac mini is completely reformatted and I plug it into the USB port on the external hard drive which I partition and install the Leopard DMG would it be able to boot off of it?
View 9 Replies
View Related
Jun 13, 2009
I recently destroyed my Macbook pro (didn't react to well to a cider) and I have contacted my insurance company who are going to send out a new one. They initially suggested that I get to keep the hardrive from the machine, but now they are insinuating that I have to send in the entire machine. I have lots of data on the drive including unprotected bank details and other sensitive information.
I somehow need to wipe this clean by monday when I need to send it off. Problem is I have no idea how to do this, the machine won't boot, all I have is a imac, I don't even have a fire wire cable that is compatible between the two machines so I can't start it in target disk mode. I refuse to send it to them with my data on it so my last resort will be to destroy the drive itself (although how I do this without causing structural damage is beyond me).
View 7 Replies
View Related
Oct 13, 2009
my MacBook harddrive stopped working last week. I took it to a Mac Certified guy, but he was unable to recover any of the applications or files on the drive. This is the second drive in two years. The first one I was able to find a guy who recovered everything and put it onto disks. I tried those on the new harddrive, and the iPhoto application and files are not opening. Is there any way to recover the stuff on the second hard drive?
View 6 Replies
View Related
Mar 5, 2009
Our old Toshiba External Hard drive has failed ( approximately 3 years old ). It powers on and the blue light comes on, but the fans don't spin and you can't see it in the finder or on my computer ( we tried on both PC and Mac ).
Any ideas as to how I can retrieve the data... without going to a specialist and pay ���, or would that be the only option
View 11 Replies
View Related
Apr 4, 2009
1 broken mac, screen dead - may be able to access the hard drive, but with migration assistant I don't see (literally) how I can. Or can I? 1 External Hard drive, with what appears to be the entire contents of the old mac on it. I can't seem to find the applications I need to restore to new mac, and the Address book won't update, even when I trash the one on new computer, and load the old one. iBook G4 - both models same. word new when speaking of these macs not taken literally, I'm guessing 2004 models.
View 2 Replies
View Related
Mar 17, 2012
When I click the purchased playlist, the songs still show up, though they do not play (due to the missing files on the broken external hard drive) and that annoying gray exclamation mark stares me in the face, as if saying "I can't find it."
Basically, the songs still show up in my itunes library but cannot be played or re-downloaded.
Info:
13" Macbook
View 1 Replies
View Related
Oct 5, 2010
my brand new dual-band Airport Extreme has been working great for the last 2 weeks since I bought it. Today I connected an external hard drive (WD Passport 500Gb) via a USB hub, and it was working great for a few Gb of file transfers.
About an hour later, I transferred another file, and the Airport ceased to work halfway through; I went to check and the Airport was completely dead. No lights, hard reset does nothing.
View 4 Replies
View Related
May 31, 2009
My iBook has had a broken hard drive for a while now. I have tried loading a Linux live cd on it, but it's mostly useless because of having no storage. I want to be able to use it on the go. Is it possible that i could use a linux live usb, such as damn small linux, and use the memory on said flash drive instead of a hard drive? How would I go about doing this if I could. Keep in mind that it wont bother me that I won't have much storage space. I really only want to use it for web browsing on the go.
View 11 Replies
View Related
Dec 10, 2014
I have lost all my data from my harts drive. The laptop is under warranty. I have been told that they have replaced my hard drive but could not get any data off the old one. I have now lost all my data, photos, files, music etc. NO backups, only simply because i did not know how to do them. Is there any way of getting the files back? All my work spreadsheets and accounts were also lost.
Info:
MacBook Pro (13-inch Mid 2012)
View 7 Replies
View Related
May 29, 2009
I have a white macbook which I purchased in 2007 ( it is the version that only goes to 2MB of Ram total). In anycase I have a Hard Drive that i want switch into it. The question I have is there any benefit to just reinstalling a fresh copy of Leopard vs using a cloning software (SuperDuper or Carbon Copy)? Here is why I ask:
I cant remember ever defragging the current drive ( if that possibility even exists in Leopard.
I dont remember running any system tool like utility.
I have basically kept computer on ( or on sleep) for the time Ive used it. It is the best computer i have ever had. It is VERY low maintainance.
So with that said....does cloning copy over every characteristic ( an fragmented drive...slowness {of which none really exists}....or the time to launch the OS when it is rebooted)?
With all of this said, I dont use this computer for much storage. I have a couple of MP3s on there which can be ported off of there with a USB flash drive....and a couple of documents. Everything else is pretty much expendable.
I dont know...something tells me that its just better to freshly install the OS.
View 3 Replies
View Related
Sep 20, 2010
I just purchused a Hitachi 500GB Travelstar internal HD to replace the 250GB HD and I have a few questions about the directions on cloning. Do you need a FireWire or USB enclosure for the new drive? Do can you use disk utility or do you have to use a program like carbon copy cloner or super duper?
View 3 Replies
View Related
Nov 16, 2010
I think it will work, but if it won't, it would be superb if someone more knowledgeable than I could tell me so
Step 1:
Buy 2.5" external Firewire 800 hard drive enclosure
Buy 2.5" SATA drive (probably 500gb WD Black or something)
Step 2:
Whack new drive into new enclosure and fire it up
Step 3:
Clone my existing 250GB internal MBP hard drive to the new one in the enclosure using Carbon Copy Cloner etc
Step 4:
Remove new hard drive from enclosure and use it to replace the internal hard drive in my Mac
Step 5:
All being well stick the old hard drive in the enclosure and use it as an external
View 7 Replies
View Related
Apr 18, 2012
I've just bought a new 500GB HD to put into my MacBook Pro. I was wondering is it possible to use my Time Machine backup drive to clone my existing drive onto the new 500GB drive? Then everything should be exactly how it already is?
View 14 Replies
View Related
