MacBook Pro :: Doesn't Detect Audio After Cloning MacBook To MacBook Pro?
Jul 11, 2009
I just upgraded my daughter from last year's MacBook to a new 2009 MacBook Pro (my mother will get her old one) by cloning the drive using SuperDuper. Everything works fine except it doesn't detect the audio hardware in the OS. I see that the new macbook pro has different audio hardware according to system profiler. Is there a way to copy the driver off the install DVD or should I just go ahead and reinstall everything.
I have a Macbook pro (OSX 10.4.11) and all of a sudden it stopped detecting a fairly new Jump/Flash drive that up until now worked fine. The icon doesn't show up on the desktop or in the Macintosh HD window.
The flash drive has "Dane-Elec" printed on it and is 4GB. I've tried it a number of times and nothing. The drive does still work on other computers, and my usb port is working properly with other devices.
The flash drive doesn't seem to show up in System Profiler and my Disk Utility has been "gathering information" for about 5 minutes now." Everything else is working fine with the notebook.
I am using MBP 13 (Non Retina ), It doesnt detect my wifi router always, Sometimes it does, When it doesnt, my other laptop and phone can detect the same wifi.
I have bought Macbook Pro last year. Its 2.4 Ghz Intel Core i5 machine with 4GB 1333 MHz DDR3. Of late it used to go to sleep randomly even while working. Last week I took it to Apple store who was not able to diagnose the cause of the problem but as a precautionary measure has changed, as per him, a bus connecting harddrive to the logic board. However the problem was still not solved. Few hours ago suddenly the machine went off and on starting it I found that it is not detecting the batteries. On the battery icon it displays an X, states "no batteries are available" and randomly switches the power source from battery to adapter and back. There is no light on the adapter. [code]
On my new MBP I fired and set-up the system, and SL was already installed. I followed the procedure of cloning my Leopard HD on to a local back-up drive, using CCC, plugged it in to the MBP and booted from the clone.It has booted up without any noticeable issues but when I go to open Disk Utility, or any other program on the cloned disk, I get the '...application X quit unexpectedly' dialogue box
I bought a MBA 13" last month and now I'm trying to connect an external monitor through a Mini Display Port-to-HDMI adapter and most of the times the display shows a message "No signal detected"...
I've tried all the possible combinations between the MAC and the Monitor but it would seem a random matter.
Info: MacBook Air (13-inch Mid 2012), Mavericks 10.9.4
My audio drive isn't working and I don't know why. I need to burn thousands of photos to get them out of iPhoto and they won't burn to a CD or a DVD. I thought I was copying photos when a message popped up saying it could not burn because an error occurred. I tried putting in a music CD and the message said it was a blank CD.
My built-in external mic doesn't record any audio when recording at all with the webcam. I've seen that this problem happens a lot in iMovie and Photo Booth, but my problem is a little unique, in that it doesn't record audio when recording with any program, not just Photo Booth and iMovie. I've tried QuickTime and even YouTube's webcam capture option, to no avail.
However, the most puzzling aspect of this is that I know for a fact that the built in external mic is functional, because I can make video calls from Skype without any problems.
my iMac (Intel, OS X 10.6.8) doesn't detect dvd's anymore. I can hear the disc spinning but after a while it will be rejected. It's the same with original dvd's and copies.
Info: iMac (21.5-inch Late 2009), Mac OS X (10.6.8)
when i clone my mac book pro (snow leopard os) hard drive using SUPER DUPER, the cloned external drive doesn't match the mac hd in gigabytes. my mac hd is max 250 gigabytes, my external drive clone is max 320. however the mac hd reads as 233.71 gb used, and the cloned ext. drive reads as 216.54 gb copied. shouldn't a cloned drive be exactly the same size as the original drive (mac hd) that's being cloned?
I have a flashdrive that I have used without issue before, but now my imac doesn't "see" it. It works on my macbook just fine. I have investigated the issue by checking DU, but it doesn't show up there, either. I have OSX 10.6.3 on the imac and OSX 10.6.2 on the laptop.
I recently transferred or am in the process of transferring my old info from a Mac Pro Tower to a new 2.8 i7 MBP. Previously, I had a 40GB SSD drive with my OS and Apps and it ran perfectly fine, however I needed more space. I ended up buying a Crucial M4 128GB SSD and upgraded the RAM to 16GB and have since had problems with the Crucial. I just now updated the firmware but that didn't seem to fix a thing.So what I've done is initialized the M4 SSD w/ Disk Utility via Mac OS Extended (Journaled) and I've done a clone using Time Machine (it worked but it was really slow and would occasionally lag for 30 seconds out of nowhere with a beach ball) and I've also done a clone using Carbon Copy and that was ridiculously slow (I would get a beach ball every 5-10 seconds and just opening a new window in the finder would cause a beach ball).
I don't know what could be the problem. I've since made a bootable SD card with both Leopard and Lion, thinking I'd just install a brand new OS onto the new SSD, but those aren't working for some reason.So yes, I'm currently using the previous and well-working 40GB SSD, but I'm lost Info: MacBook Pro, Mac OS X (10.6.8)
I am upgrading my MBP first gen unibody to an SSD drive. I just read that we should not clone an existing HDD to a SSD. The author did not give a reason why. So, my question is: will cloning my current HDD to a new SSD (using Super Duper) adversely affect the SSD performance? My initial plan for upgrading before reading this article was to clone my HDD to a new SSD in an enclosure (using Super Duper), then install the SSD. I thought this would save me a lot of effort restoring everything from scratch.
i need to clone and replace my internal hard drive. it's 150 GB and almost full, so I'm replacing it with a Seagate 500 GB so I can upgrade from Os x 10.4 to Snow Leopard, and generally have TONS more space
I'm attempting to do the cloning in Disk Utility- I've got the new internal hard drive connected via USB right now, however when i select it as the destination, the 'Restore' option remains greyed out...
I imagine I need to format my hard drive, however I impulsively clicked 'New Image' and it began creating a disk image of the new hard drive...
When I first got my Macbook Pro I cloned a 250Gb in the result of a major crash. Since then it has been sitting in a 2.5 enclosure in my drawer. I never imagined that I would use as my primary drive, it was just an afterthought. I wanted to switch to a larger drive and I was going to clone it to save time. Has anyone run into issues with a clone as their primary drive? In short is a cloned drive going perform the same as a fresh install?
Im going to be cloning My HDD in the near future, and Im going to be making a bootable clone. My one Question is whether or not my VM's will be cloned as well, and will be fully operational after the clone is complete?
I have a problem of a slow boot (3-4 minutes) with my MacBook Pro. Bought my first iMac 27" in December 2013 and going great. Decided to buy a 13" MacBook Pro retina with ssd in May and thought I would clone my iMac to the Pro. Before cloning Pro would boot up fast but after the clone it takes 3-4 minutes.
I just purchused a Hitachi 500GB Travelstar internal HD to replace the 250GB HD and I have a few questions about the directions on cloning. Do you need a FireWire or USB enclosure for the new drive? Do can you use disk utility or do you have to use a program like carbon copy cloner or super duper?
I use my iMac for my media business, however I will be on the road more this year, and so I was going to put all my files, apps etc over to my work's MacBook so I can get things done for my clients while I'm on the go. Of course the thing is all my apps, files etc are lodged in the iMac, so I thought that the only way to avoid manually reinstalling stuff (and then have to move it all back to the iMac again) was to clone the user account or drive? Is there a way that this can be done?
sorry if this has been asked; I tried searching.Anyway, I just bought a larger capacity hard drive and am not sure how to copy the stock 160GB 5400RPM one.Do I need to have some sort of connection to the new hard drive?Is there any way to copy it without having to buy some kind of peripheral?I also have an external hard drive.Would my best bet be just backing everything up and just set up the hard drive as new and just restoring everything??
Is there a program or thing I can do to share apps between my iMac and Macbook? I have heard of cloning the HD as another way of doing it? How does this work? Is this even legal?
So my hard drive just broke. Like a fool I accidently dropped it this morning and this means it cant be booted. I've tried everything I could find on reviving the thing but nothing has worked. However, after leaving it on the grey Apple booting screen for a good hour or so it finally managed to get to the desktop but was still going slowly. My macbook is able to boot of my external hard drive and I've checked the RAM and it's fine, which leaves me to believe that it's a problem with the hard drive itself.
Now the issue is that my external hard drive is only 160GB and my internal (now broken) one is 500GB with around 300GB of stuff on it (yes I do need it) and I don't want to have to lose it all. So is there any way of getting my currently broken hard drive and putting its data onto a new one? My idea is to take it out, install the new one and use the broken was as an external and do it like that.
I've just bought a new 500GB HD to put into my MacBook Pro. I was wondering is it possible to use my Time Machine backup drive to clone my existing drive onto the new 500GB drive? Then everything should be exactly how it already is?
I was wondering if there is anyway to pretty much copy a Vista partition on a Thinkpad T500 (university Laptop) onto a bootcamp partition, I would need to clone it because my university doesn't give us install discs, they load the OS on the laptop's as a image with all the program specific software, this would help because then I can use my mac for both OSX and class work.
I have a white macbook which I purchased in 2007 ( it is the version that only goes to 2MB of Ram total). In anycase I have a Hard Drive that i want switch into it. The question I have is there any benefit to just reinstalling a fresh copy of Leopard vs using a cloning software (SuperDuper or Carbon Copy)? Here is why I ask:
I cant remember ever defragging the current drive ( if that possibility even exists in Leopard. I dont remember running any system tool like utility. I have basically kept computer on ( or on sleep) for the time Ive used it. It is the best computer i have ever had. It is VERY low maintainance.
So with that said....does cloning copy over every characteristic ( an fragmented drive...slowness {of which none really exists}....or the time to launch the OS when it is rebooted)?
With all of this said, I dont use this computer for much storage. I have a couple of MP3s on there which can be ported off of there with a USB flash drive....and a couple of documents. Everything else is pretty much expendable.
I dont know...something tells me that its just better to freshly install the OS.
think this guide will be useful to anyone looking to install an SSD to accompany a larger capacity drive but is a little unsure how to tackle the cloning/file organization side of things with two drives.
I was surfing the web, and suddenly the wheel started spinning and my MacBook locked up. I tried rebooting, only to see a folder with a question mark on it. So I tried to boot from the DVD and use Disk Utility to repair my HDD. But Disk Utility didn�t detect my hdd. So I assumed that the drive was dead and bought another one and istalled it. The new hdd was not recongized by my machine either. Then I took the old hdd and installed it in a external case which connects to the computer with USB and I managed to boot OS X from it.
Anyone knows how I can make my MacBook detect my internal SATA drive?