I've never done this before, but I'm curious if I was to swap the hard drive from my macbook and my macbook pro if they would still boot and operate as normal?I'm plenty capable of taking them apart, I just would like to know if I can save myself the time of reinstalling the OS by just swapping the drives.
View 13 RepliesMy old model A1150 has a very nice 750 MB hard drive (with all my files on it). I just bought a somewhat newer MBP with a 200 GB HD.Can I just swap the hard drives? Any trick to it? One has Snow Leopard, the other just Leopard.
Info:
MacBook Pro A1150, Mac OS X (10.5.8), 2 GB Ram, using FCE 4
I just got a unibody 17''. Can I swap the hard drive in it with a 15'' Santa Rosa MBP? Just to save time installing everything plus the 15'' has a newish 7200 rpm hard drive. I noticed the trackpad System Preference is different between MBPs so I'm wondering what else is different.
View 3 Replies View RelatedI have two Macs:1. MBP i7 - Hitachi HTS545050B9SA02 500gb (5400rpm)2. MacMini 2.0 C2D - WDC WD3200BEKT 320gb (7200rpm)Software I use: Logic Pro, Adobe, Bootcamp, and Gaming..According to the below benchmarks, the WDC scores 494, while the Hitachi scores 346.
View 4 Replies View RelatedHow do I "Physically" swap my hard drive from my old mac to my new macbook pro Mid 2012?I know how to swap them easily enough but when I do this I turn on the new mac and all I get is a "Circle with a line through it"
Info:MacBookPro, Mac OS X (10.7.4)
My late 2006 MBP 160GB hard drive died, can I install a late 2006 macbook 60GB hard drive into my macbook pro without any boot issues? Both machines have snow leopard, but since this is not a straight swap and I'm crossing between models I wasn't sure how successful I would be. I know that can't transfer my files, but I just wanted a working computer until I can get a new hard drive.
Info:
MacBook Pro, Mac OS X (10.6.8)
Is possible to just swap the 500g hard drive into the G5 Power Tower instead of cloning the hard drive - Both PPC ?
View 4 Replies View RelatedJust got a new MacPro at my office (the end-of-life'd 8 core model) and my old MacPro is going to a coworker. Can I just take the drive out of my MacPro and stick it in the new MacPro and just be off and running? I mean, i've already done it and everything seems to be running ok. The only issues I'm seeing is that my Adobe CS3 software freaked out and deactivated and TimeMachine wants to start over - won't recognize my previous backup data
View 1 Replies View RelatedWe've got a 17" G5 iMac and a 20" Intel iMac that need to switch places and users. The easiest thing for me, would be to just swap out the internal hard drives. They both have Leopard installed, but I don't know if the different processors get dedicated system software installed, or can I just swap 'em?
View 7 Replies View RelatedCurrently, my iMac has 10.4.11 on the internal 250GB drive and 10.5.8 on an external 500 GB drive. Is there any way to 'move' 10.5.8 to the internal drive and the 10.4.11 to the external, even if it requires another external drive to accomodate the swap, without reinstalling?There is plenty of disk space on each. Not sure if this would require new installations with some form of backup of data/applications. Trying to do as little as possible.
View 12 Replies View RelatedMacbook harddrive crashed (flashing question mark folder etc.). Bought new harddrive (2.5 in SATA), and reinstalled. Don't have original installation DVD so used legally acquired Mac OSX. Now instead of folder, the Apple logo appears with spinning gears but otherwise unresponsive. Can't install or eject DVD.
View 2 Replies View Relatedthinking of relegating my mini to HTPC and buying a new base model 15" MacBook Pro. As both these systems have essentially the same hardware, including 9400M graphics, can I just swap the hard drives so my current 7200rpm mini drive goes into the new MacBook Pro, and the new, unused, 5400 rpm drive comes out of the Pro and into the mini?
Any reason this wouldn't work? I just think it would take a lot of time to back everything up to Time Capsule and then fresh install both hard drives.
My wife uses our old intel blackbook from 3 � yrs ago, still running Tiger with a 120GB HDD and 2GB RAM. I'm upgrading her to snow leopard, and I am wondering if I can swap my 250GB HDD in my unibody macbook into her blackbook, and buy a 320GB 7200 rpm drive for my UMB. I use more memory than she does, and I would love a snappier drive in the 7200. Both of our current macbooks are 13" and both drives are 5400 rpm drives. This is the best deal I've found on the drive I want.
View 10 Replies View RelatedI am wondering if there is anything I can do to prepare my computer for a hard drive swap regarding repairing any permissions or erasing any files.
Im planning to swap my 500GB 5400 OEM drive for a 500GB seagate Momentus XT using super duper, I was wondering if I should do anything to make sure I don't have any errors and get the best out of my new drive.
I'm fairly new to macs and am having some problems. Here's the situation:
I've got a 3 year old 13" Macbook - 2.1 Intel Core 2 Duo, 1.83 Ghz, 512MB memory, 60 GB hard drive - I bought it from
Apple directly - it was a ""reconditioned"" one from the factory.
It has worked fine for 3 years, but lately has been getting slower and slower (most programs), and even the home screen has been acting weird, and loading up funny, if at all sometimes, and I get the "spinning beachball of death" much more often and/or for longer periods. I have all my files copied elsewhere, and I just figured I would start over and reinstall the 10.4 Tiger OS that came with it - I have the original grey install/restore DVDs.
In case it matters, the two install/restore DVDs read:
mac os version 10.4.8
AHT version 3AA18
disc version 1.0
22691-5967-A
So here's what I've tried so far:
-I booted up with the install/restore DVDs and have run the hardware checker several times. It says everything is fine.
-Also through the Utilities on the restore disk, i checked/repaired the disks and the "permissions" which showed up in the Disk Utility as the "Mac hard drive" or something like that, about 5 or 10 GB, and the main part of the drive, the "55.9 GB Fujitsu MHV2060BHPL". That all seemed to check out fine as far as the computer could tell me.
-I tried installing Tiger from the restore DVDs, the first time with the "archive and install" option. It seems like everything is working with the installation, and it gets through the second DVD, but when its done, it states that there are "software errors" and to try to install it again. (And no it won't boot up at all on its own...) I tried it again with another of the install options, I think it was "Erase and Install" - same thing. I also tried the "first time install option" too - same thing.
Next, since I got all my info off the computer already, I tried reformatting. First I used the function that writes zeroes over everything, for both the "Mac HD" and the "55.9 GB Fujitsu" drive too. Then I tried all three different install options again, starting with the "initial install" one. I also went into Disk Utility and used the format (and/or partition?) function and the drive has been redone with the mac os "extended journal" format, always with the same result as before. The whole thing (including the DVD test that it runs) seems to go fine with the install, but at the end it always says there are software errors and to try the install again... Is this possibly a hard drive problem (even though it "tests" fine)?
What if I ordered one of these:
Would that work in my macbook? Could I just replace the drive and go for another "first install"? Or is it likely something else?
I'm going to do my first HDD swap with my unibody macbook. I was all set to use Time machine, but I'm hearing that CCCloner or SuperDuper are a better idea. So, could someone link me a good deal on an enclosure I can stick my new drive into? OR, would I be ok just cloning to a partition on my 1TB external WD drive, then installing the fresh HDD, then cloning from external WD to new internal?
View 2 Replies View RelatedI have acquired the following MB with a toasted HD. MacBook 13"/2.0/2x512/120/SD Black I have the following MBP as my main laptop: 17" MBP 2.6GHz C2D HDef 200GB_7200 2GB RAM Instead of just buying a new HD for the MB, I'm thinking of upgrading my MBP to a 500GB, and then flipping the 200GB over to the MB. I have the Hitachi Travelstar 7K200 in the MBP to flip into the MB. Thinking of purchasing the Hitachi Travelstar 7K500 for the MBP.
View 1 Replies View RelatedI'm looking at the specs page for the MacBook Pro and it reads this...
Your MacBook Pro comes standard with a 5400-rpm Serial ATA hard drive. Choose a hard drive with a faster speed for greater performance. Or you can choose a solid-state drive that offers enhanced durability.
Basically suggesting that the HDD option has a performance advantage over the SSD, but is this the case? I always thought SSDs could read & write quicker because they use solid-state flash memory as opposed to hard disks.
I want to go with the 256GB SSD but I want to know how it ranks in speed.
I have a mac mini right now with a mbp on the way as a replacement... would I be able to just take out the HD from the mini and put it in the mbp or would I need to do a completely new installation?
not sure on dependent the hardware is on the os installation...
I received my new i5 MBP today. After booting it once with the installed HDD to check if it's ok, I exchanged the hard disk for the one in my Late 2008 Macbook Pro. After doing this, my Late 2008 Macbook Pro boots fine with the (new) hard disk from the new i5 MBP, but the i5 MBP does not boot with my old hard disk.
To give you some details:
- I have installed 10.6.3 on the (old) hard disk that's not booting.
- The i5 MBP boots fine from the installation DVD
- Disk utility finds and can read my hard disk, no errors
- PRAM NVRAM reset did not help
- when booting in safe mode, I can see the system stop booting after or while loading Extensions.mkext
My guess is, it tries to boot and load the wrong Extensions for the new system (CPU? GPU?). I have no idea how to fix this.
Solution: Re-install Mac OS X from the installation DVD that came with the i5 on top of the existing (old) system. This takes around 45min. and leaves your data intact, but adds the Core i5/i7 support.
I've just ordered another drive since the 160gb I allocated to OS X of my primary drive's measly 250gb of space simply isn't enough. I'll likely change my old 750gb data drive into the new primary and use my new drive as a larger data drive. I'm not really fussed about changing the size of my Boot Camp partition - I just really don't want to go through the hasselhof of reinstalling Vista and updating it etc. If it wasn't for the boot camp partition then I'd simply do a direct copy of the stuff on the OS X partition to the new drive. Any suggestions? I'll happily leave it sitting for a while copying stuff over but reinstalling and updating Vista, OS X and all my applications isn't really an option.
View 1 Replies View RelatedI split my MacBook Pro into 130 GB for OSX and 100 GB for Windows 7. Although I do enjoy and use Windows 7 on my laptop often, I need more space on the OSX side for my media. At first I planned to keep it in an external My Passport drive and just connect it whenever I wanted to use my media, but I came to learn that that idea is a pain in the ass. So I would like to keep all of my media (mostly music) in the OSX partition. The thing is though, I have a Windows 7 desktop at home, and I installed windows 7 on my MacBook Pro only because I found it convenient to be able to work on Windows-only things when I'm not at home. So I really don't need that big of a partition on my MacBook for Windows. I figure, for my purposes about 50 GB is plenty. I already have a copy of all my media hooked up to my PC on an external harddrive at home anyway.
I would like to have all of my media wherever I carry my MacBook as well so I would like to adjust the partition to maybe just 50 GB for Windows and the rest for OSX. Is there any way to do this without having to reinstall Windows 7? I would really like to avoid the process of reinstalling Windows and all the programs I already have in it.
I am planning to move my SSD drive from my MBP into an iMac. If i do this, will it boot, or will I need to format and reinstall everything? (i understand its a 2.5" drive, that isn't an issue I have a caddy)
View 3 Replies View Relatedjust got my first mac (a freebie):
iMac G3 Power PC 233
160MB RAM
OSX 10.3.9
Darwin 7.9.0
4GB HDD
the first two things i want to do are upgrade memory and hard drive. problem is i have none of the media the software came on. is there a way to transfer all apps (no data yet) to another HDD?
I have an old G5 I'm giving away and I don't have the install disc for it. I was wondering if there was a way of formatting the hard drive and not reinstalling OS X straight away, but if someone inserts the disc when booting it up they can reinstall it.
View 6 Replies View RelatedPreferences, playlists, purchased music, etc.
I figured there was a thread just like this already but didn't find it.
Is it possible to merge two partitions at Mac hard drive without re-installing the OS.
View 4 Replies View RelatedI recently had to erase my hard drive because it failed and my computer wouldn't start up. When I try to reinstall Mavericks it just goes back to disk utility and I still can't start up my computer.
Info:
iMac
Hoping someone can help me figure this out. I swapped HDDs between a G5 and MacPro this morning. The MacPro was connected to a large LCD TV via HDMI for it's display (using a DVI to HDMI adapter) and it worked great for just scrolling images of our projects (no audio). When I put it's HDD in the G5 and connected it to the display the same way, I got nothing on the screen. Thinking it was a video card issue on the G5 end, I plugged in a different monitor and rebooted the G5. This time I got the flashing question mark folder meaning it couldn't find an OS to boot. So now I can't tell what the issue is. I thought HDDs between G5s and MacPros were the same? If not does this mean the older G5 drive won't work in the MacPro tower? (I haven't tried yet).
View 13 Replies View RelatedI have just done a target download from my QuickSilver to the Imac of the user folder that i saved before I put in the new HD. Now I need to know how to reinstall the preferences so that the apps that are installed on the new HD will look the same. This includes all my bookmarks for both Firefox and Safari, and my address book for Thunderbird. I copied and transfered everything from one HD to the other and then back. i need to know what and how to pick out of the Users folder and where to put it. Also if i need to delete the existing pref that is in the new folder now.
View 2 Replies View Related