I'm having a regular problem with my MacBook screen. Every time I put it to sleep, when it starts back up again the screen stays blank / black. The way to remedy this issue is to close the lid and open it again immediately. Then the screen comes on and no further problems.
Serial: W8905MCX1AQ
It's a 2008 aluminum 13" MacBook with snow leopard 10.6.4
2Ghz Intel core 2 duo with 4gb of ddr3 RAM.
I bought a new unibody Macbook around 4-5 months ago and I've generally been very impressed with it. It's my first Mac and considering all the problems I'd had before with Windows PC's, it's quite a relief.Anyway, here's the issue. When hooked up to my 24 inch Dell monitor there are numerous problems. Originally it just started with the screen intermittently turning itself off and on, and there being a sleep/wake issue. I did some research then and discovered that this was by no means a problem confined to me. Knowing this I was prepared to wait until Apple fixed it with a firmware update or something, as the problem was annoying but not devastating.
However since then the problem has got significantly worse. Not only are the screen flickering, sleep wake/issues occuring much more frequently, but there are other problems. For instance, the menu bar and the dock sometimes fail to show, and I've been having a very weird problem with the Logitech mouse I use. Even though I can move the cursor generally I can't click, and when I can, only the right mouse button works.The same is true with the trackpad, so it's not a problem with the mouse.
When these problems occur the system generally seems to be very slow. I've checked the 'activity monitor' and the use of 'system memory' seems to be very high. For instance, at the moment (I'm using my Macbook by itself) I'm running a few applications (Mail, iCal etc.) and I've got 1.09 gb of free memory. Last night I was running exactly the same applications and I must have had less than 0.4 gb of free memory. The pageout numbers were fairly high as well.
It's strange because when disconnected from the external monitor the Macbook seems to work seamlessly. I just don't understand how some of the problems I've experienced (such as the mouse issue) can arise from problems relating to the external monitor setup. What do you think? Should I be worried that these issues are perhaps indicative of a greater problem? Either way, the problems are becoming hard to deal with. Very disappointing.
My macbook, 3 years of age, always turns on whenever I put it into sleep mode. It gets REALLY annoying. So I close the lid, and a few seconds later, you hear the macbook turn on, then a few seconds later, it goes back to sleep mode. This happens endlessly and it gets really annoying.
View 2 Replies View RelatedI'm a Mac Pro guy and this is my first Mac laptop. How do I make it so nothing happens when I close the lid? Not using external display or anything. Sometimes it's just nice to be able to close the laptop when moving from place to place, I just don't see the need to sleep the machine when I do so. I do this on my Acer laptop all the time.
View 3 Replies View Relatedhow do i turn sleep mode off on my powermac g4?
View 11 Replies View RelatedWhen I turn on my ibook G4 it does the start up chime and it goes to the start up screen and begins to load with the blue background and the gray box in the middle, every time though, it only gets to the "Waiting for network initialization" then it goes right into sleep mode, the white glowing button comes on, and I can't get it out of sleep mode.
View 1 Replies View RelatedWhy is my ADC monitor not turning on after I put my G5 to sleep? I am running an adaptor to my G5 from the ADC monitor (DVI to ADC).The screen usually runs fine when I reset the monitor or turn it off but as for when I put it to sleep, no such luck..This has happened once before and last time I just waited and randomly turned it on a couple days later and boom, the screen booted up.I have tried basic options, like resetting the computer several times, pulling the power cable out of the G5 for several minutes and even a PRAM reset but nothing seems to have made it work as of yet.I assume it's within the G5 as it has happened a few times and the monitor works fine when I test it on other computers..Also as I mentioned before this is not the first time it occured and it just randomly seems to come on whenever.
Info:
ADC Monitor and G5 Power PC, Mac OS X (10.7.3)
I've been using Pc's for the past 30 odd years so am totally new to Mac. I'm doing my best to adapt to this new different OS and so far have found some things more user friendly but others ? I've more or less given up on those as Mac doesn't seem to do those things. These are probably Windows based and I'm assuming Mac has its own alternatives that I haven't discovered yet. Anyway, my immediate problem is this goddamned frustrating situation when I try to re-activate the comp' after waking it from 'sleep'. Sometimes its fine but others, it comes back on but freezes and the only option I have is to turn it off at the switch and do a re-boot!
Info:
iMac (21.5-inch Mid 2011)
my screen keeps turning off if i play with the brightness the screen will come back on i think this is a inverter problem were can i get a inverter for a white plastic macbook
Info:
MacBook, Mac OS X (10.7.4)
I have an older generation Macbook Pro (the all-silver two-part body style that came out before the current Macbook Pro) that I got approximately two years ago. I do use it quite heavily but have always taken good care of it.
About a week ago, I was using it as normal, then put it into sleep mode and went away from it for an hour. When I came back to it and opened it back up, there was nothing. I tried closing it and re-opening it, still nothing. I did a hard shut-down by pressing the power button until the power light went off, and then restarted it. Even though the computer turned on and the power light lit up, the screen remained black, and the Apple symbol on the lid remained unlit.
I called technical support and they ran me through a list of fixes including holding several keys down and turning on the computer, etc. None of them did anything to the computer as far as I was able to tell. I was not getting any sound, either--whether from having my computer muted or from the computer not working, I'm not sure.
I then tried putting the MBP into Target Disk Mode by connecting it to my sister's MB--no response. Still, the screen remained black on the MBP and no icon for the MBP Disk appeared on the MB. Even though the computer powers up, runs the fan and everything, it appears to be dead for all intents and purposes.
I have two main questions here:
1) What is going on here? Is it as simple as a screen problem, or has my motherboard gone? This is the very first problem I've ever had with my MBP; nothing has led up to this.
2) Is there any chance that my files are safe? I'm currently on vacation and backed up my files prior to leaving, but have done a lot of work since being on the trip and am not too keen to lose what I've done.
Why does my macbook pros screen keep turning blue and how can I fix it.I have to turn my computer off completely and then turn it back on again.
Info:
MacBook Pro
My 2006 mMcBook is dead and parted out. I still have the case and screen, but no HD, RAM, battery, or working logic board. How can I take the screen and make myself an external monitor out of it? I am presuming it's possible. I can solder a little and I love messing with parts from radio shack. So, has anyone heard of this? I tried googling it but couldn't find any search terms that brought me what I wanted.
Basically, I want to convert the video cable to DVI or even better, Display Port, and then figure out how to solder in a power source to just plug into a wall (since I'm assuming it'd be too big of a job to have it powered off of the FW800 or USB from the macbook pro). Is this possible? Since the computer is dead and gone, it won't hurt to experiment. Anyone have any links or guides to this?
I have a 15 inch early 2008 MBP that the screen will not turn on. When i power on, the hard drive makes a sound that its turning on, but then nothing happens, there is just a black screen. The indication light is on, but again, nothing on the screen. I have tried pulling out the battery, resetting everything i can reset, but still nothing.
View 1 Replies View Related1. Screen Brightness is on. Desktop functioning as normal, according to the brightness set.
2. Randomly, the entire screen brightness will switch 'off' - but not go to sleep - it is set at the brightness level, as if you would have turned it all the way down manually. Automatically, my screen goes from:
3. After clicking the brightness button on the screen - when I look closely - the brightness control is set at its previous level, but the screen is not at that brightness! darkest screen (above, right) + brightness settings up   Â
4. In order to solve the issue, I have to hold down the minimize brightness button and then turn it back up, from the lowest setting. This only works about one in five times. All other times, the screen briefly flashes and then goes dark again.    Â
Info:
MacBook, Mac OS X (10.5.8)
I just bought a 24" screen for my macbook so i can really enjoy movies in my room. I was wondering if there was a way for me to close my laptop screen but still watch the movie ( so i dont see double picture) I know i can dim down the macbook's screen to almost dark but the screen is still on and using power. If anyone knows how to do this let me know.
View 1 Replies View Relatedscreen goes black, laptop seems to have not turned off but nothing can turn the screen on. seems fine after a reboot but problem recurs at some random future inconvenient point in time. problem is annoyingly inconsistent - it will occur at random (no discoverable software or hardware conjunctions), sometimes around once weekly, sometimes less frequently. have already had it in a mac repair, said they fixed it, something to do with graphics card firmware.Â
Info:
MacBook Pro, Mac OS X (10.6.8)
This started very suddenly today. I was in finder looking through some pictures when my screen suddenly turned blue. After a second, it faded back to normally, so I continued what I was doing. After about 5 minutes, it happened again, but faded back. It's be less than a half-hour, I haven't touched the computer but the screen is turning blue than fading back every half a minute or so. Every now and then, the screen stays blue for about 20 seconds.
View 12 Replies View Relatedi have a MacBook Pro..I had my track pad replaced recently..I am not sure if it has anything to do with my screen, however, the screen is randomly turning gray and white with lines and fading out..What does this mean
Info:
MacBook Pro, Mac OS X (10.5.8)
I was on Netflix but all of a sudden my MacBook crashed, it wouldn't do anything, so I held the power button until it turned off. But when I tried to turn it back on, the booting wouldn't complete. It turns on, I hear the chime, I see the apple logo and the "turning on" screen but out of nowhere it turns off. What should I do?
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I have an iMac G3 which I am VNC'ing in. Its never going to be turned off, and I am never going to look at the screen, so how do I turn it off? I Want to save the CRT, and its not needed. I Know there's a way to actually turn off my MBP's Screen.
View 2 Replies View RelatedI wanted to fix this hardware problem with my iMac G4 20". Basically the LCD screen has a redish tint in the corners, only really visible when displaying something bright/white. Also, when looking at the screen from an angle when displaying a black image, it looks completely red. What's the fault here? Is it the panel itself or the backlight?
View 5 Replies View RelatedNot sure where to put this posting, but just recently I installed tech tool pro 5 and recently my computer screen(s) keep turning blue, almost like they are about to go to sleep, or the computer is going to be reset!
View 4 Replies View RelatedI have a 24" 2007 iMac, the first aluminum ones, 4Gb of Ram and a recently upgraded HD to 1Tb (from a 320Gb failed drive). Recently, I have noticed that under some active usage, such as playing World of Warcraft or Excel, the screen will start to turn completely off for 10 seconds, and then back on for 10 seconds. It will continue to do this for about 3 hours, turning on and off every few seconds or 15 seconds. It will mostly turn completely dark but would also sometimes flicker. The curious thing, is that if I continue to keep playing, the screen would cease doing this after about 3 hours and then be completely normal and fine, but the next night.
The symptoms would repeat itself, and would consistently go away after active usage (3 hours or so). Imagine this, as if the iMac itself needs to be "warmed up" for 3 hours before normal usage. It would also appear that if I hit the machine (or tap it), this may sometimes bring a dark screen back to life for a few seconds. I plan to bring it to support, but I just want to get some ideas from you guys as to what this can possibly be.
Some of my guesses:
1) It cannot be software as physically hitting it or my dog barking would affect the rate and speed of the random turn Ons and Offs.
2) It could be a loose connector from my recent transportation of it while upgrading my HD, but then why would it become normal after 3 hours of usage?
3) Maybe something to do with RAM or video RAM? It is faulty, and thus only prolong heavy usage would "run it in" for the session? After not using it for a while, it goes back to its failed state?
I've found a very rough way of shutting it off by going into System Preferences->Sound->Sound Effects and turning off "Play user interface sound effects" but ideally I'm looking for a way to turn off specific UI sounds not just all of them at once.
View 2 Replies View RelatedHave a problem with an PowerBook 867 upon turning on it starts with a normal screen for a few seconds and reverts to a dark screen and continues to load as normal except for dark screen if I can find the curser I can change resolutions and the screen will return to normal for a second then revert, have tried everything but nothing works , have tried reseting (button under keyboard, removing battery holding down option and control with R P keys etc) but nothing fixes, I have noticed this has happened to others on this forum but I cannot seem to find the answer can anybody help?
View 2 Replies View RelatedA file folder with a question mark Appears on my screen when turning on. What does this mean and how do I fix it?
Info:
iMac
A friend of mine brought over his 14" iBook G4, 1.33GHz, 60GB HDD and 1.25 GB RAM. The problem with it is that upon start-up, the grey screen with the apple/turning gear comes up, then after a few moments a blue screen will appear, though no box showing the start-up process. I've run a few basic diagnostics on this, including the lovely disk utility (which did nothing), I've run fsck, zapped the PRAM, etc, no success as of yet. At one point, I received a screen with alternating folders, one showing the smiley mac face, the other folder with a flashing "?". I cannot replicate this for the life of me. I have attempted to acquire files via TDM, though am not able to see the hard drive despite using 2 different laptops. Possibly the firewire cable itself is spent, though it's brand new! Here is where I become increasingly frustrated: I ask my friend for the boot disks as the ones for my own 12" iBook don't work (for whatever reason). He tells me that he loaded Leopard this summer (currently running 10.5.2, no updates loaded since), then proceeds to bring over boot discs for a MacBook...:headdesk: To begin with, it seemed like the HDD was fried, however, after running disk utility (and not hearing any negative sounds), it does appear that the HDD is fine. I'm thinking a kernel panic, though not sure how to resolve these.
View 11 Replies View RelatedMy iMac doesn't come up after turning the power on,the logo keeps running but it doesn't start or open the screen.
View 1 Replies View RelatedIs there any way to put the screen to sleep prior to the given time in energy saver? I have it set to 10 minutes there but there are times when i want the screen to sleep right away.
View 17 Replies View Related13" macbook screen goes to sleep but won't wakeup reliably. I can see a faint dark screen and I hear the computer working but can't see anything. If I press the screen light keys it will flash a view and almost seems to fix the problem. Closing / opening clamshell a number of times eventually causes it to work. The sleep light on the front sometimes stays solid instead of throbbing. I can even plug a remote monitor in and it will display on the remote. Using 10.6.8
View 6 Replies View Related