Not sure where to put this posting, but just recently I installed tech tool pro 5 and recently my computer screen(s) keep turning blue, almost like they are about to go to sleep, or the computer is going to be reset!
View 4 RepliesWhy does my macbook pros screen keep turning blue and how can I fix it.I have to turn my computer off completely and then turn it back on again.
Info:
MacBook Pro
This started very suddenly today. I was in finder looking through some pictures when my screen suddenly turned blue. After a second, it faded back to normally, so I continued what I was doing. After about 5 minutes, it happened again, but faded back. It's be less than a half-hour, I haven't touched the computer but the screen is turning blue than fading back every half a minute or so. Every now and then, the screen stays blue for about 20 seconds.
View 12 Replies View RelatedI have iMac 27 and screen problem on start up i have blue vertical lines, when it start i have a lot of blue dots and nothing else. when I connect outside monitor its showing the same.
Just installed lion and still the same problem when it starts blue dots, when startup in safe mode loads of blue lines and dots on the screen.
Info:
iMovie (iOS), Mac OS X (10.7.3)
it keeps switching its self off dont know weather its the charger or the laptop?
Info:
MacBook Pro, Mac OS X (10.6.8)
My display turned progressively bluer.
Info:
Mac mini, Mac OS X (10.6.8)
while i am using my macbook the screen will suddenly go blue and flash between different blue colors like it is trying to work. sometimes it comes back on but most of the time it stays like that. I have to force shut down with the button and then restart...about half the time it is still flashing blue after the restart and if it does work, it goes blue eventually.
dont know if its a problem with the screen or what because the computer continues to work...if there is a movie on, you can here it in the background and the screen just flashes.
I just got a new mid 09 macbook pro no matter how I calibrate the screen. the dark/deep blue will always look like purple colour.
View 4 Replies View RelatedI have an iMac G3 which I am VNC'ing in. Its never going to be turned off, and I am never going to look at the screen, so how do I turn it off? I Want to save the CRT, and its not needed. I Know there's a way to actually turn off my MBP's Screen.
View 2 Replies View Relatedmy screen keeps turning off if i play with the brightness the screen will come back on i think this is a inverter problem were can i get a inverter for a white plastic macbook
Info:
MacBook, Mac OS X (10.7.4)
I am looking at purchasing an Ibook G4 but the description of the item includes this:"When you switch it on it begins to load up i.e. the blue screen with the Apple logo, but then the screen goes black or flickers. Said friend has kindly wiped the hard drive for me so now when you switch it on it makes the �opening� noise then you get a blue screen with alternating �?� and the Finder logo."
I have a feeling this may have been a temporary fault with the screen connector being loose and possibly damaged.But i assume the alternating "?" and the "finder logo" is simply a lack of OS?
just installed 10.5.6 on their last gen. iBook.She left the iBook plugged in to the mains and came back to find that the iBook was alternating between the grey Apple screen and a light blue desktop screen where she could see the cursor. Sometimes it would also switch to a blue screen without a cursor.
I've tried holding shift during startup - no effect.
I've tried rebooting NVRAM - no effect.
After windows is installed a Blue screen appears with cursor on screen but it freezes completely.I can fix this by restarting my mac , then once windows restarts i insert the Mac OS disc , select the disc within my computer but the following message appears "Package requires new version of installer"
View 8 Replies View RelatedI have a problem with my MacBook screen. Everytime I try to turn on the MacBook, the blue screen appears for a second and then everything gets dark (but I can see that the computer turned on normally, it's just the screen that gets almost black, without light). Sometimes only the right side of the screen is blue and then gets dark just like the left one. I was looking for the problem and I perceived that the left side seems to be loose and I can't fix it. What should I do?
View 2 Replies View Relatedgrey screen no apple followed by blue screen with vertical lines. Graphics and logic board replaced <6 months ago. What to do? I held down shift, it gets HOT HOT and makes noises. (for safety mode) followed by a blank grey screen and blue screen. Then tried the other way (I think it's command alt delete? I don't remember) and it turned from grey (no apple symbol) to blue blank. Then third time, grey followed by blue with vertical lines, not blocky clear lines that you can see if you are close to it.
Info:
MacBook Pro, OS Lion
New to Mac computers. When trying to open computer after being in sleep mode, I clicked the mouse to open the password screen, & a blank blue/black screen appeared & the mouse timer( colored circle) appeared, as if to be waiting. I had to unplug the computer to reboot it. This has happened twice in 2 days.
Info:
iMac (27-inch Mid 2011)
I wanted to fix this hardware problem with my iMac G4 20". Basically the LCD screen has a redish tint in the corners, only really visible when displaying something bright/white. Also, when looking at the screen from an angle when displaying a black image, it looks completely red. What's the fault here? Is it the panel itself or the backlight?
View 5 Replies View RelatedI'm having a regular problem with my MacBook screen. Every time I put it to sleep, when it starts back up again the screen stays blank / black. The way to remedy this issue is to close the lid and open it again immediately. Then the screen comes on and no further problems.
Serial: W8905MCX1AQ
It's a 2008 aluminum 13" MacBook with snow leopard 10.6.4
2Ghz Intel core 2 duo with 4gb of ddr3 RAM.
I have a 24" 2007 iMac, the first aluminum ones, 4Gb of Ram and a recently upgraded HD to 1Tb (from a 320Gb failed drive). Recently, I have noticed that under some active usage, such as playing World of Warcraft or Excel, the screen will start to turn completely off for 10 seconds, and then back on for 10 seconds. It will continue to do this for about 3 hours, turning on and off every few seconds or 15 seconds. It will mostly turn completely dark but would also sometimes flicker. The curious thing, is that if I continue to keep playing, the screen would cease doing this after about 3 hours and then be completely normal and fine, but the next night.
The symptoms would repeat itself, and would consistently go away after active usage (3 hours or so). Imagine this, as if the iMac itself needs to be "warmed up" for 3 hours before normal usage. It would also appear that if I hit the machine (or tap it), this may sometimes bring a dark screen back to life for a few seconds. I plan to bring it to support, but I just want to get some ideas from you guys as to what this can possibly be.
Some of my guesses:
1) It cannot be software as physically hitting it or my dog barking would affect the rate and speed of the random turn Ons and Offs.
2) It could be a loose connector from my recent transportation of it while upgrading my HD, but then why would it become normal after 3 hours of usage?
3) Maybe something to do with RAM or video RAM? It is faulty, and thus only prolong heavy usage would "run it in" for the session? After not using it for a while, it goes back to its failed state?
I have an older generation Macbook Pro (the all-silver two-part body style that came out before the current Macbook Pro) that I got approximately two years ago. I do use it quite heavily but have always taken good care of it.
About a week ago, I was using it as normal, then put it into sleep mode and went away from it for an hour. When I came back to it and opened it back up, there was nothing. I tried closing it and re-opening it, still nothing. I did a hard shut-down by pressing the power button until the power light went off, and then restarted it. Even though the computer turned on and the power light lit up, the screen remained black, and the Apple symbol on the lid remained unlit.
I called technical support and they ran me through a list of fixes including holding several keys down and turning on the computer, etc. None of them did anything to the computer as far as I was able to tell. I was not getting any sound, either--whether from having my computer muted or from the computer not working, I'm not sure.
I then tried putting the MBP into Target Disk Mode by connecting it to my sister's MB--no response. Still, the screen remained black on the MBP and no icon for the MBP Disk appeared on the MB. Even though the computer powers up, runs the fan and everything, it appears to be dead for all intents and purposes.
I have two main questions here:
1) What is going on here? Is it as simple as a screen problem, or has my motherboard gone? This is the very first problem I've ever had with my MBP; nothing has led up to this.
2) Is there any chance that my files are safe? I'm currently on vacation and backed up my files prior to leaving, but have done a lot of work since being on the trip and am not too keen to lose what I've done.
i have a mac ibook..and the screen is like halfway on there..and halfway not..the left two inches of the screen is blue...and everything is blurry except the background
View 11 Replies View RelatedI had the dreaded blue screen a week ago, thanks to a bit of research here I booted from disk, then disk utility, permisions and then finally a reinstall.but now unfortunatly I seem to have a shadow or some kind of screen burn for lack of better words on the bottom left side of my 27" LED imac
Info:
Mac OS X (10.6.8)
I've found a very rough way of shutting it off by going into System Preferences->Sound->Sound Effects and turning off "Play user interface sound effects" but ideally I'm looking for a way to turn off specific UI sounds not just all of them at once.
View 2 Replies View RelatedMy 2006 mMcBook is dead and parted out. I still have the case and screen, but no HD, RAM, battery, or working logic board. How can I take the screen and make myself an external monitor out of it? I am presuming it's possible. I can solder a little and I love messing with parts from radio shack. So, has anyone heard of this? I tried googling it but couldn't find any search terms that brought me what I wanted.
Basically, I want to convert the video cable to DVI or even better, Display Port, and then figure out how to solder in a power source to just plug into a wall (since I'm assuming it'd be too big of a job to have it powered off of the FW800 or USB from the macbook pro). Is this possible? Since the computer is dead and gone, it won't hurt to experiment. Anyone have any links or guides to this?
I have a 15 inch early 2008 MBP that the screen will not turn on. When i power on, the hard drive makes a sound that its turning on, but then nothing happens, there is just a black screen. The indication light is on, but again, nothing on the screen. I have tried pulling out the battery, resetting everything i can reset, but still nothing.
View 1 Replies View Related1. Screen Brightness is on. Desktop functioning as normal, according to the brightness set.
2. Randomly, the entire screen brightness will switch 'off' - but not go to sleep - it is set at the brightness level, as if you would have turned it all the way down manually. Automatically, my screen goes from:
3. After clicking the brightness button on the screen - when I look closely - the brightness control is set at its previous level, but the screen is not at that brightness! darkest screen (above, right) + brightness settings up
4. In order to solve the issue, I have to hold down the minimize brightness button and then turn it back up, from the lowest setting. This only works about one in five times. All other times, the screen briefly flashes and then goes dark again.
Info:
MacBook, Mac OS X (10.5.8)
I just bought a 24" screen for my macbook so i can really enjoy movies in my room. I was wondering if there was a way for me to close my laptop screen but still watch the movie ( so i dont see double picture) I know i can dim down the macbook's screen to almost dark but the screen is still on and using power. If anyone knows how to do this let me know.
View 1 Replies View Relatedscreen goes black, laptop seems to have not turned off but nothing can turn the screen on. seems fine after a reboot but problem recurs at some random future inconvenient point in time. problem is annoyingly inconsistent - it will occur at random (no discoverable software or hardware conjunctions), sometimes around once weekly, sometimes less frequently. have already had it in a mac repair, said they fixed it, something to do with graphics card firmware.
Info:
MacBook Pro, Mac OS X (10.6.8)
I bought a new unibody Macbook around 4-5 months ago and I've generally been very impressed with it. It's my first Mac and considering all the problems I'd had before with Windows PC's, it's quite a relief.Anyway, here's the issue. When hooked up to my 24 inch Dell monitor there are numerous problems. Originally it just started with the screen intermittently turning itself off and on, and there being a sleep/wake issue. I did some research then and discovered that this was by no means a problem confined to me. Knowing this I was prepared to wait until Apple fixed it with a firmware update or something, as the problem was annoying but not devastating.
However since then the problem has got significantly worse. Not only are the screen flickering, sleep wake/issues occuring much more frequently, but there are other problems. For instance, the menu bar and the dock sometimes fail to show, and I've been having a very weird problem with the Logitech mouse I use. Even though I can move the cursor generally I can't click, and when I can, only the right mouse button works.The same is true with the trackpad, so it's not a problem with the mouse.
When these problems occur the system generally seems to be very slow. I've checked the 'activity monitor' and the use of 'system memory' seems to be very high. For instance, at the moment (I'm using my Macbook by itself) I'm running a few applications (Mail, iCal etc.) and I've got 1.09 gb of free memory. Last night I was running exactly the same applications and I must have had less than 0.4 gb of free memory. The pageout numbers were fairly high as well.
It's strange because when disconnected from the external monitor the Macbook seems to work seamlessly. I just don't understand how some of the problems I've experienced (such as the mouse issue) can arise from problems relating to the external monitor setup. What do you think? Should I be worried that these issues are perhaps indicative of a greater problem? Either way, the problems are becoming hard to deal with. Very disappointing.
Have a problem with an PowerBook 867 upon turning on it starts with a normal screen for a few seconds and reverts to a dark screen and continues to load as normal except for dark screen if I can find the curser I can change resolutions and the screen will return to normal for a second then revert, have tried everything but nothing works , have tried reseting (button under keyboard, removing battery holding down option and control with R P keys etc) but nothing fixes, I have noticed this has happened to others on this forum but I cannot seem to find the answer can anybody help?
View 2 Replies View Related