I just bought a Mac book air and went through VO tutor but now cannot get past the Welcome page. So after every button pushing failure I'm on my iPhone to get support...
Info:
MacBook Air, iOS 7.1.1,
Any documents I try to view whether sent to me or on a site, do not progress past page 2,whether I scroll side to side or up and down.
Info:Mac Pro, Mac OS X (10.6.8)
My MacBook Pro won't load past the start up page when I turn it on.
Info:
MacBook Pro
Teaching in Netherlands. When connected to wireless, signal bars are full but Macbook does not display any page just a blank page. Itunes and App store both work fine.Â
My windows notebook and Android phone both connect to wireless.No proxy options are ticked.Ran the Assistant Diagnostics: Selected Wireless, Network settings, ISP, Internet, Server went green/red then back to green with messafe saying Network Change detectedRestarted routerRemoved wifi network and reconnectedRan wireless diagnostics, nothing shows up Renewed DHCP LeaseChecked the Ipv4 and Router address - both begin 192.168.178.xThere are two DNS Server numbers - checked both and they are related to the ISP
Dont have ethernet cable to check wired connection
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
I have a MacBook Pro. While I am on a web page, a Yahoo page keeps popping up even after I go back on the browser page to get rid of it.Â
Info:
MacBook, iPhone OS 3.1.2
i have a 2010 15" MBP 2.66 ghz i7, with 4 GB ddr3 1066 ram, 500 GB 7200 rpm HDD, and the nvidia GT 330 M gpu. I tend to get down around 30 MB of ram when i am running Starcraft 2. I do not understand what pages in and pages out means. Before i started SC 2 it was like 50k + pages in and 0 pages out. After running SC 2 for like2 hours i have 150k+ pages in and 100k + pages out.I am pretty sure i just need to add some more ram but i would like to know what these mean so i can better monitor my system.
View 4 Replies View RelatedHow do I change from Yahoo home page to Google home page?
Info:
MacBook Air, Mac OS X (10.5.8), novice user
I have been working on a template where I have placed a two column table on the front page, left side being for a graphic for a letterhead, and right side column for text.
My problem is that on the second page, I would like the document to continue on without any table. I would like for the text to flow from the table into regular margin document on the second page. Is there a way to do this?
Problem Description:
1. System prints PDF files very slowly, about 50 seconds per page, a text only page. Sometimes will just continue sending data to printer as indicated by flashing green light on printer – does not stop sending and printer does not print. Problem also present when try to print PDF files as sent by others over internet (eg TD Bank statements).
2. Unable to cause double sided printing using IMac – no problem with PC.
Trouble shooting:Took the same one page text only file that was very slow in IMac, transferred to PC using a memory stick – connected printer to PC using same USB cable – page starts printing in about 1 seconds – no problems.No difficulty in printing Word files other than no double sided. Think the problems started with OSX Yosemite upgrade and the companion Safari upgrade. Auto update for software is on and no new updates. Old drivers removed and new one installed Tried Apple internet chat to resolve problem – was unable – the user forum indicates others have had difficulties with printing PDF files.
SystemIMAC 27 INCH, LATE 2013Processor  3.5 GHZ INTEL CORE I5Memory  8 GB 1600 MHZ DDR3Serial Number C0*8J4OS X Yosemite Version 10.10.1SAFARI VERSION 8.0 (10600.1.25.1)Adobe Reader XI Version 11.0.09Printer  HP LASERJET 1320 on wired USB connectionDriver HP Version 19.8 Word Microsoft for Mac 2011 - Version 14.1.0.
I seem to be having a hell of a time with all google related things. About 50% of the time I can't get to the google search page and get the error message Safari can't open the page [URL] because Safari can't connect to the server. When I am able to get into gmail, I am constantly being disconnected from gchat, like every 5 minutes. When it disconnects, it will try to reconnect, most of the time unsuccessfully. I then get the error message, unable to reach gmail please check your internet connection. This happens no matter what browser I use. However, when I try to connect from my husband's PC (same network), everything is fine. I've tried emptying my safari cache, tried uninstalling and re-installing both safari and firefox, and I am out of ideas. Any ideas about what is going on, and how I might fix this issue. I searched through the google help, and there were similar problems posted (none recently), but no answers on how to solve the issue. This has been going on for about a week now, and it's driving me up a wall.
View 3 Replies View RelatedAfter installing another 4gb of aftermarket RAM in my 27 imac, is approx 100 page outs per million page ins normal??
View 1 Replies View RelatedI am using the "White" template, and on my top page, the page title is right there in my webpage. How can I get rid of this? When I load the page with text edit, I get some crazy Apple page, so I don't seem to be able to edit the HTML directly. Honestly, I hope to find solutions to problems like these so that I can avoid HTML in the future.
View 1 Replies View RelatedIs there any way to start page numbering on page 2? Reason is my first page is my cover page. I have the "First page is different" checked under the Layout Inspector, but page 2 is still numbered as page 2.
View 9 Replies View RelatedI have been trying to get Microshaft word 2008 for Mac to start page numbers only on page 3.
I have a title page, a table of contents, and then the body of my document.
I have created a section at the bottom of the table of contents. Then in the footer, to the next section, I have tried to insert page numbers. BUT it routinely adds page numbers to the bottom of the first section as well. SO I have page 1 on the title page, page 2 on the table of contents; then I have page 1 on the first page and so on.
i have mac OS x 10.4.2 with iproof power rip x 7.19
using Epson Stylus Photo 1290
when i print more the 2 pages after each page the printer take out 2 blank page and than stops (i have to press its bottom to make it pull the next paper)
if i don't press the bottom or sometime in a middle of the printing page i get an error "the process usb stopped unexpectedly with status 81"
after a while the printer stops and i have to make it start again
I currently run Safari 5.1.6 on an iMac with OS X 10.7.4 and no matter which page I designate as my Home Page, Safari ignores this and on start-up always opens the last page I was on.
View 1 Replies View RelatedI have been having some sluggish performance recently and I'm guessing it could be something to do with memory allocation. I have been reading a few things on this board and have found that page ins/outs can have an effect on performance (although I'm still not entirely sure what it all means).
I have closed all my applications except for my browser and the activity viewer to see what is going on. My page readings on the system memory page state:
Page ins/outs 182139/247702.
I have read somewhere that if you have more page outs than ins then you have a problem. Therefore my questions are:
a. Is this actually true and what do page in/outs actually mean?
b. I currently own an eMac 1.25ghz with 512 RAM, running OS 10.3.5.
I signed out of Safari then signed in again. Now the bookmarks for the AT&T - Yahoo page do not display on the page. Other bookmarks are intact. Do I have to reload them?
Info:
iMac, Mac OS X (10.6.7)
In Safari, I am no longer able to print web .pdf documents. The print screen pops up, however the preview document shows a blank page. I am able to print in Firefox, so this has to be a Safari problem. I have checked my Internet Plug In files and there is no Adobe plug in as suggested by others in similar questions. Turning on/off the computer has not helped either. Nor has Open PDF in Preview. I'm using an iMac with Lion and an HP Photosmart C4700 printer.
Info:
iMac, Mac OS X (10.7.3)
I have a problem with my MacBook. Recently iphoto kept freezing whilst looking through pictures, then eventually crashed. Kept trying it over and over and it did the same thing. Then firefox started crashing too. Restarted my MacBook and I got to the log in page. Entered my password but it then froze on the blue screen. Tried booting in safe mode but it didn't get past that point either.
View 2 Replies View RelatedIf i lost my receipt, can i reprint it from my account?
View 1 Replies View RelatedI'm on the finishing screen of set up and am supposed to click a button to move on. The keypad is locked and the trackpad is locked for clicking by default, what can I do?
Info:
MacBook Pro
My MacBook pro froze so I turned it off.Now when I turn it on it goes to the grey apple screen then stops at a plain blue screen with the mouse up but nothing else.
View 2 Replies View RelatedBought a refurb from Apple and they don't send the install disk. Now can't get past the login screen. Thought I left the password blank but it won't let me get past the start up screen. Tried the install disk from my 15 inch mbp by holding C and starting up. but it only tells me I need to restart.
Info:
MacBook Pro, Mac OS X (10.7.3)
Okay well, to start off, I got my MacBook from a distant family member who got a new one so they let me have their old one. They got it from a pawn shop so I don't have the disk that we got the OS from but it hasn't had any issues UNTIL NOW. I need to use my laptop for a homework assignment. Everytime I turn it on it'll just stay on the loading screen, I left it for 4 hours yesterday and it still wouldn't work. I reset the (insert acronym here) thing already, the thing where you press control, option, P, R keys at start up. because my assignment is on the laptop and it's due tomorrow.
Info:
MacBook Pro
macbook pro, 2011, won't go past start up apple?
Info:
MacBook Pro, Mac OS X (10.7)
My Macbook Pro (2008) was upgraded to Lion 10.7.2 before I bought it used. It's always been slow and after a little while it won't boot up properly, it only gets as far as the apple logo with the spinning wheel underneath.
I've have used Recovery HD and Disk Utility to repair/verify the hard drive and after the repair it still won't boot up past the apple logo. I downloaded OSX Lion 10.7.4 (client combo) update onto an external drive but I can't install the update when using Recovery HD. I've tried mounting the existing hard drive onto an external drive, but I get an error mesage immediately.
There are only a few folders I need to take from the existing hard drive in the Macbook Pro. What can I do to either access my hard drive or get it to boot up properly? I have a retail copy of a Snow Leopard DVD that I can use. I believe I might have saved Lion onto a DVD a while ago, but Apple seems to insist we intall by downloading the latest Lion? Basically I need to access the hard drive without erasing the data.
Info:MacBookPro, Mac OS X (10.7.2)
I hardly ever turn off my Macbook unless i need to - I just close it and use it whenever i need to. I let the battery run dry as Apple suggests to do every now and again, and turned it on the next day. It started to boot and took a little longer to get past the grey apple logo and loading circle and then froze on the blue screen. I can control the mouse, but every few seconds it changes to a darker blue, cursor disappears but returns after a second or two. I've tried:
- Booting into safe mode (Same thing happens)
- Booting from CD and repairing permissions (Said everything was ok, same thing happens when I booted)
- Single user mode (used some commands from an Apple page and restarted)
I can however boot into windows perfectly fine, which leads me to suspect it's a corrupt log in item. I'd like to know for sure it's not a hardware problem so I don't have to take it into an Apple Store.
Any reason this would be happening..?
View 1 Replies View Relatedfirst i'd like to give you a few pieces of information on what was going on before I restarted my mac. 1. My mac is a 13'' late 2008 mb with 2gb of ram (running leopard). 2. I JUST had my hard drive replaced due to a failure. 3. Before i restarted my computer i was having several "system extenstion" errors and when i tried to repair i recieved the message 'Underlying task reported failure on exit.' At the time, i was also trying to install Adobe CS5 Master Collection trial and i couldn't get past a password screen. This also prompted me to restart. Once the computer began to restart, it began updating boot caches. This was taking a very long time so i walked away from the mb. When i came back i realized the battery had died and when i plugged it back in and tried to get it to boot, it would get to the gray screen with the apple and the spinning logo underneath. But then it simply reboots.
I've tried restarting the pram. I've tried rebooting in single user mode (cmd + S) and got to the point where i could rebuild the tree (fsck_hfs -r /dev/disk0s2) and that did it's thing for about ten minutes and it didn't fix the problem. I don't have my install disk but apple is sending me a new one and will be here by friday.
