MacBook Pro :: The Monitor Was Black Apart From The Cusor?
Jun 30, 2010
This afternoon I was on my MacBook pro and had to pop out so I shut down the lid as always. When I came back and opened the lid back up, all I saw on the monitor was black apart from the cusor.So I couldn't get it to shut down in any way, I hit the power button and then back on. All I was greeted with was a grey screen with not even an apple logo. I read that I needed to boot up from the installation disk and did that. On disk utilities disk 0s2 is greyed out - I tried to repair the disk but it says 'disk utility cant repair this disk'The 500gb hitachi drive has a smart status of read/wrote.Is this normal?
I have been using the latest macbook pro 13.3" since April 2010. Over the last week the monitor suddenly goes completely white and the external monitor goes black. The laptop becomes unresponsive although the programmes opened continue running (e.g a skype voice call would continue without interruption although the monitor is all white).
The only solution at the moment is to press the turn off button for a few seconds then switch the laptop on again. It will then work normally until for no apparent reason this happens again.
Yesterday I was watching a film from an external hdisk with VSL program.I had connected my Macbook pro to my LCd tv with a DVI/HDMI cable.When the film finished i went to another room to do something and when i came back the monitor and the tv were black . I pressed the esc key but nothing.I pressed the power button off and on again but nothing.The mac is sleeping.I disconnected the battery but nothing.
My Macbookpro is three years old and this is the first time that i have a problem.I tested a lot of combination of keys ,something like the ctrl+alt+del in PC but nothing.
I am running an older Macbook Pro 2008 model with OSX 10.6.8. I am getting a black and white image on my external TV. I am using the official mac DVI to composite adapter.Â
I also have bootcamp installed and use the same adapter on the Windows XP side and it works fine in full color out to a TV with the same adapter.Â
About half a year ago I got a Macbook Air, and a Thuderbolt monitor. Then I installed Windows 7 64-bit on it. Everything worked fine until recently the Thunderbolt monitor started to go black during Windows startup without any particular reason. Using OS/X the monitor works fine. I already scanned for malware and viruses but cannot fine any. Windows restore refuses to work? I also tried several different boot options, installed latest drivers, reinstalled bootcamp drivers but no luck so far. Â
I'm using an external Monitor (Compaq W185q) and everything's ok until I open certain webs, this websites have banners on both sides mostly, so I think that's important to tell. After couple seconds on those sites, the monitor starts flickering and then it turns black, completely. To make it work, I launch Mission Control and it starts working again, I drag the safari window back to my MBA's monitor, and problem solved. Â
I have a early 2011 MacBook Pro 13" running the latest version of Lion. I have been using my MacBook with an external monitor since I brought it in 2011 and have had no problems with connecting it to my external monitor. Connected via mini display port DVI adapter and a DVI cable to a Philips monitor.
Two days ago when I plugged the MacBook back in to the monitor I connected and but now only displays a black screen, I can move the mouse off the MacBook screen and over to the external monitor and back but it is not displayed on the monitor. I have tried connecting other devices to the monitor and they work fine.
Info: MacBook Pro (13-inch Early 2011), Mac OS X (10.7.4)
Well my unibody macbook display decided to screw up last night, it was working fine last night no problem. Connected to a external monitor. I fell asleep last night with front row left on, obviously it went to sleep and then I woke up and the screen was black. Now the LED lights are working, my external display is also working. The display settings recognize a screen being present (when I click detect displays and gather windows - 2 windows appear). Ive reset PRAM, SMC, reseated the RAM, control+shift+eject (which just made the screen flicker a little after turning it back on) and Im out of ideas. Its out of warranty and about about 18months old.
So I had a recently purchased 17" BTO with the 7200RPM drive that worked great, but with one issue - the display would have horizontal scan lines and black out occasionally. So I called up Apple and eventually managed to get a cross-ship set up(they let me hold on to my current unit, charge my credit card and send me a second brand new 17" unit as a replacement,and then refund me for the second 17" after I send back the defective unit).
Anyway, the replacement unit looks great, but with one issue - there's a very small light dent on the bottom panel(maybe about the size of a dime). I was annoyed but don't think this is worth having to exchange, since I could probably just unscrew the panel and pop it back into place.
However, what really got to me was the fact that my replacement unit was slightly louder than my original - my original is so silent that I can't even tell it's on. However, with my replacement unit, I can hear the hard drive spinning, which is slightly annoying.
Anyway, I proceeded to restore from a time machine backup and test my replacement unit when I noticed that it would occasionally get the hard drive click + beep + freeze issue that many others who have the 7200 RPM drive seem to be facing. It's extremely annoying, and more importantly I miss the complete silence of my older unit.
My question is, while I'm still in possession of both units(which both have the exact same specs, same 7200 RPM drive, etc.), should I simply just open both up and take the silent(good) hard drive from my old unit and put it into my new one?
The click+beep freeze issue is really pissing me off, and my old unit didn't suffer from it - it's just this replacement one(doesn't make any sense).Anyway, would notice if I switched the hard drive? Would I get screwed somehow? Do they keep track of the hard drive serials or something?
I really don't want to go through the pain of sending this back, especially considering that a LOT of people are suffering from this issue, and I don't want to end up with another defective drive. I'm sick and tired of games and just want a computer that WORKS.
I have set up a second monitor to my imac using a dvi to vga cable. Now I would like to watch videos in itunes full screen on the second monitor but whenever I select them to play in full screen it makes my iMac screen go completely black.
I set my screen's resolution to 800x600 in order to play a newly downloaded game demo (Jets N'Guns). The screen went black and will not reset after trying many things:
Last couple of days my emac monitor will just shut down and go black, just like an old TV tube packing up used to. It won't return on restart, but did return a couple of times after I took out mains lead from side of computer, let it rest, then tried again. However, today, this solution didn't work, but a tap to the side of the computer did get the screen going. I've read a number of different possible explanations for what might be the problem - everything from battery, to airport card to it's terminally ill, get a new computer, so don't really know what to do. Don't want to go and buy a new computer if all I really needed to do was change the battery.
I calibrated my monitor today and now my menu bar is completely black. If I put the mouse there then I can see the items in white. Also, the titles above the icons in the dock are black. In addition, all the menus from the different programs are black also. How to get the normal menu bar, etc. back.
24" iMac running 10.6.3 and having some issues all of the sudden with my secondary monitor. It detects the display and the monitor comes out of standby, but only shows a black screen. Tried it with another monitor to see if that was the issue but it's not. Seems as if the iMac is sending bad video signal out... Couldn't find anything similar on a quick google search so I thought I'd try here to see if anyone had any similar problems.
I recently replaced my older MBP (2007) for a MBP, 2GHz, Core i7 with thunder bolt. I normally connect to my external monitor, a Samsung SyncMaster B2230HD. This worked perfectly for my needs. I connect my MBP via a Mini Display Port to VGA adapter.Â
Do not want a nuisance to escalate into a serious problem thru benign neglect. Random black screen -- Turn monitor off then on, and all comes back fine. No loss of power in machine, no fan quirks, no overheating. Is it the Monitor? or the graphics card?
After moving I setup the Mini, but got nothing from the monitor. Reset PRAM & PMU, nothing. CPU chimes, etc.work, but the only thing I get from the monitor is a yellow square with a brief message indicating there's no signal.
It's a Mini, 2 MB RAM, Core 2, OSX10.5.x, it's less than a year old. The CPU appears to be OK. Monitor is getting power.
My father owns one of the original G5s, so its power pc not intel. Today while browsing an excel spreadsheet he says part of the screen turned black, then the monitor shut off, then the monitor came back on but not video. Mean while the fans started spinning out of control. Now when he tries to turn it on, he gets power, but all that happens is the fans spinning faster and faster and faster until he turns it off. No video or anything. Just speeding fans. He fears the CPUs died since they control the fans. Any suggestions? He also says the fans were spinning unusually fast these last few days.
I have a Macbook Pro 2.16 Core Duo, and I'm wanting to install 10.6, but about a year ago, I cracked my screen to the point that I cannot make anything out on it, and haven't replaced it. Instead, I have just been using it in clamshell mode, which has worked out fine so far. My problem is that I cannot get the 10.6 install to show up on my external monitor.
I searched around, and could only find one other similar thread that just ended with the author putting it in clamshell and having it work fine. When I boot to the install and close the screen, I just get a grey box on my external display with a black bar on either side of it. I can't seem to find any other resources, so I'm not entirely sure what to do at this point. Any help would be greatly appreciated.
I can barely see digital pictures and the likes. But websites and such i can see fine so long as the colors are light and looking on this site... [URL]
the first image i absolutely cannot see, it is 100% pitch black.. the other bellow it shows up just fine. But the two left/lowest squares on the color table on the very bottom the page both appear the same shade of pitch black.
I can see light but not dark. I tried callibrating and adjusting brightness and contrast.
I'm looking for a few good ways to transport and use my UMB. I figure buying a hardshell case & a timbuk2 bag seem like a good combo. Question is - which do you guys think is better, the Speck or Incase cases? Anyone have any experiences? I had the Incase hardshell for my old whitebook.
Seemed to work out alright. The other option I thought of was getting the invisible shield. Anyone have any thoughts?
I have a fresh install of Windows XP, service pack 2 on a boot camp partition on my macbook (13" first gen aluminum case) and a Apple LED Cinema Display attached to the mini display port.
I can't seem to make the Cinema Display the primary display (the "Use this device as the primary monitor" checkbox is always greyed out in the Display Property Settings tab). I also can't shut the macbook lid and continue to use it closed (with kb, mouse and monitor attached) like I would when booting OSX.
Is there some other way to make the Cinema Display the primary monitor, so I can leave the macbook closed when booting into Windows?
I picked up a new MacBook yesterday and I noticed a weird issue when coming out of "monitor sleep" mode, not regular sleep mode.
When I move the mouse, the external monitor shows what you see in the picture, kinda like a TV with no signal. The MacBook screen works fine so what I just do is unplug and re-plug in the DVI plug and everything is good again.
My 24 inch Dell monitor worked fine with my M1330 and other computers so I know it's not that. Does anyone have the same issue or maybe give me some light on this?
I have a 22" Dell external monitor on my MBP. I know that I just close the cover to my MBP to shut off the screen. What do I do in those instances that I want to use both screens? There has to be something simpler than restarting the MBP?
As said, my current set up is an HDMI - DVI cable (HDMI to monitor and DVI to adapter) and my DVI - mini DisplayPort adapter, everything is connected fine but when I turn on the monitor, it says cable not found... and nothing is displayed on the screen but on the Macbook side of things, it sees the monitor is connected (I can extend the screen and leave the screen) but other than that, it appears I cannot get an image on the monitor, pressing every button on the monitor does not work either.
Any other information that may seem necessary, let me know. I tried clearing my PRAM and clearing the power and such but nothing seems to work.
Do any of you have a sensor-type looking thing on your iMac's? It's on the black strip around the edges just above the black Apple Logo.See my picture for what it looks like (you'll have to look closely to see it):I'm interested to see your responses of what it could be/is. I've only had the machine for going on for 3 days now so I'm new to the whole iMac thing.
I came back from work to wake up my iMac. It made the noise but the screen stayed black. I tried restarting by holding the power button- I can hear it start and the chime but still have a black screen. I tried resetting the pram, and unplugging the cord but I still get a black screen. I can hear the chime though; I'm not sure if that means anything. I just had the hard drive replaced in February so I hope it's not that. just wanted to clarify that when I restart, I get the chime but the screen stays black- I don't get to the grey screen. So I'm assuming right now that my display may be shot?
I have a G4 powerbook with an LCD that only displays the top 25% of the screen. I've been using an external monitor with it just fine. Today, I reinstalled the OS and ran into a problem. The main OSX startup menu (you know, where it asks for your location, timezone, personal info, etc) is prompting me for information, and I can't see the forms to fill them in! The external monitor defaults to "extended" as opposed to "mirrored", and the forms are embedded, meaning I can't drag them over to my external monitor. Obviously, if I can't fill out these forms and get to the desktop, the laptop is completely useless.
Does anyone know how to force the external monitor to be "mirrored" from startup? Is there a keycommand?
