MacBook Pro :: Getting Black And White On External Monitor?
May 16, 2012
I am running an older Macbook Pro 2008 model with OSX 10.6.8. I am getting a black and white image on my external TV. I am using the official mac DVI to composite adapter.Â
I also have bootcamp installed and use the same adapter on the Windows XP side and it works fine in full color out to a TV with the same adapter.Â
Info:
MacBook Pro, Mac OS X (10.6.8)
View 1 Replies
ADVERTISEMENT
Jul 30, 2005
I have been using the latest macbook pro 13.3" since April 2010. Over the last week the monitor suddenly goes completely white and the external monitor goes black. The laptop becomes unresponsive although the programmes opened continue running (e.g a skype voice call would continue without interruption although the monitor is all white).
The only solution at the moment is to press the turn off button for a few seconds then switch the laptop on again. It will then work normally until for no apparent reason this happens again.
View 1 Replies
View Related
Jun 10, 2012
How do I change the iTunes screen display from 'white on black' to 'black on white'
Info:
24" iMac
View 3 Replies
View Related
May 11, 2012
I have a early 2011 MacBook Pro 13" running the latest version of Lion. I have been using my MacBook with an external monitor since I brought it in 2011 and have had no problems with connecting it to my external monitor. Connected via mini display port DVI adapter and a DVI cable to a Philips monitor.
Two days ago when I plugged the MacBook back in to the monitor I connected and but now only displays a black screen, I can move the mouse off the MacBook screen and over to the external monitor and back but it is not displayed on the monitor. I have tried connecting other devices to the monitor and they work fine.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.4)
View 3 Replies
View Related
Feb 27, 2009
I have a Macbook Pro 2.16 Core Duo, and I'm wanting to install 10.6, but about a year ago, I cracked my screen to the point that I cannot make anything out on it, and haven't replaced it. Instead, I have just been using it in clamshell mode, which has worked out fine so far. My problem is that I cannot get the 10.6 install to show up on my external monitor.
I searched around, and could only find one other similar thread that just ended with the author putting it in clamshell and having it work fine. When I boot to the install and close the screen, I just get a grey box on my external display with a black bar on either side of it. I can't seem to find any other resources, so I'm not entirely sure what to do at this point. Any help would be greatly appreciated.
View 2 Replies
View Related
May 7, 2010
Well my unibody macbook display decided to screw up last night, it was working fine last night no problem. Connected to a external monitor. I fell asleep last night with front row left on, obviously it went to sleep and then I woke up and the screen was black. Now the LED lights are working, my external display is also working. The display settings recognize a screen being present (when I click detect displays and gather windows - 2 windows appear). Ive reset PRAM, SMC, reseated the RAM, control+shift+eject (which just made the screen flicker a little after turning it back on) and Im out of ideas. Its out of warranty and about about 18months old.
View 4 Replies
View Related
Nov 23, 2009
It started when I was using an external monitor. There is a white line in the center of my screen on the desktop wallpaper. However it does not show up on any other screen. It does not change when I change wallpapers. I has to be a software issue because it only affects the wallpaper. Enclosed a pic of the problem. White Macbook osx 10.6.2
http://i64.photobucket.com/albums/h1...3at12813PM.png
View 3 Replies
View Related
Feb 6, 2012
I recently replaced my older MBP (2007) for a MBP, 2GHz, Core i7 with thunder bolt. I normally connect to my external monitor, a Samsung SyncMaster B2230HD. This worked perfectly for my needs. I connect my MBP via a Mini Display Port to VGA adapter.Â
Display resolution:Â
VGA (External Monitor) 1920x1080 60 Hz
MBP Display 1440 x 900Â
Problem: Now with the new MBP, I get a black stripe on the left on side. (See pic)Â Â
Troubleshooting Steps:
a) Replacement VGA Cable
b) Replacement Mini Display Port Adapter
c) Tried a HDMI cable (worked but with disminish resolution and a yellow tint)
d) Adjusted both MBP and Samsung display settings include Auto Adjust.Â
I determined that the monitor is okay because the screen is filled with a lower resolution and "mirror display".
View 1 Replies
View Related
Feb 3, 2012
Desktop restart shows flickering black/white screen, then black. Could not restart.
Info:
iPad 2, Mac OS X (10.6.6)
View 3 Replies
View Related
Mar 11, 2012
My MacBook screen has started to black out. I have to click the brightness button to 0 and then click to 3 bars to see/read the screen. Any higher brightness blacks out the screen within seconds.
Info:
MacBook, Mac OS X (10.6.8)
View 6 Replies
View Related
Jan 12, 2009
I have had my alum Macbook since its release, and have a personal preference issue about the black keys. Since 08 I have loved my slim IMac chicklet keyboard with the white keys, so much so that I purchased an apple bluetooth keyboard to type on for long typing excursions. I had the bluetooth keyboard right up against my Macbook and realized that the layout, size and shape of the keys were identical. I love the white keys simply for the contrast of the black letters on the white chicklets. I also hate how the keys are getting shiny black, just kinda feels cheap. I should try to swap the keys on these units? I would love the white keys on my macbook, but I am not sure if they attach the same. I don't have the backlit keys, so I wouldn't loose anything.
View 2 Replies
View Related
Feb 16, 2009
I really dont like the black chiclet keys on the unibody MBP. Although I would really want them in classic grey, I was wondering: Would it be possible to buy a set of WHITE KEYS from the old Macbook 13 inch series, and put them in the new MBP Might sound crazy, but would be cool if it worked
View 23 Replies
View Related
Feb 26, 2012
I have an early 2011 macbook pro and I was wondering if my macbook pro's model is the black or white unibody.
View 4 Replies
View Related
Dec 2, 2008
I ran a file to export which converts to a quicktime .mov file.I expected these times but what's nice is that the fans on the MB kick in at full blast in 1 minute whereas the MBA full fans at 4 minutes full. Far less fan noise on the MBA! Looking at the temps, the MBA ran a full 11 degrees cooler the entire time. Fan noise is very important as I can now record voice from a usb mic without the fan noise being recorded as was the case with the Macbook.
Only downside is that the MBA takes longer (didn't time it) to cool down. Does anyone else have a longer than usual cool down time for the fans to go from full 6500 rpm to the norm 2500rpm?
View 7 Replies
View Related
Sep 16, 2009
I have the 13" White Macbook but wanna change it to the original black case. I wanted to purchase it on eBay. Is that possible or not? I want to get the black one but the white macbook I have already has Adobe CS4/Microsoft Office 2008/Final Cut installed and I dont want to lose those programs because I really need them for graphic design.
View 9 Replies
View Related
Apr 8, 2012
My 2008 MacBook Pro (17in) has just started up with a white screen and strange black marks - almost like ink spilled on white paper. I cannot get anything else.
Info:MacBookPro, iOS 5.1
View 6 Replies
View Related
Apr 19, 2012
How do you make a macbook print only black and white on the internet?? All my docs are printing in color
View 1 Replies
View Related
May 20, 2012
My images on my screen are like in black and white.
Info:
MacBook Pro
View 1 Replies
View Related
Jun 5, 2014
I have just bought new colour printer and do not want to waste money printer all documents in colour!!Â
Rather than having to remember to go into options and force to B&W each time, can I set it to default?Â
Info:
MacBook Pro (15-inch Mid 2010), OS X Mavericks (10.9.3)
View 3 Replies
View Related
Jun 29, 2014
When I start up my macbook pro white and black lines appear for the startup screen in bunches. After that the screen is black but the keyboard is lit up and you can still hear the sounds of turning up the volume and music can still play.Â
View 1 Replies
View Related
Aug 29, 2014
Mac Book Screen only Displays in Black & White, Need to change to Color But don't know how to.
Info:
MacBook, Mac OS X (10.6.8)
View 2 Replies
View Related
Jan 2, 2011
I have a 15'' mbp previous generation with the silver keys. I had my trackpad repaired by apple back in March 2010. Since then, these little black smudges and white spots have been appearing behind the lcd screen. The black smudges actually look like dust that got between the screen. I took some pictures and circled them. You can see them better against a white screen. Sorry about the quality of the pics. The first one is the whole screen and the second two are close ups of a black smudge and a white spot.
View 5 Replies
View Related
Jan 9, 2010
I was wondering if there is such a thing as a sticker to make the white glowing Apple, black.
I want the Apple to match my iMac's. I don't want it to be completely black without the glowing light though.
If it does exist, where can I buy it?
View 4 Replies
View Related
Jun 17, 2014
I recently got my laptop back after the logic board was replaced and now black lines with white text keep appearing on the screen. When this happens I cannot do anything except hold the power button in to reset.
Info:
MacBook Pro, OS X Mavericks (10.9.2)
View 1 Replies
View Related
Oct 16, 2008
I picked up a new MacBook yesterday and I noticed a weird issue when coming out of "monitor sleep" mode, not regular sleep mode.
When I move the mouse, the external monitor shows what you see in the picture, kinda like a TV with no signal. The MacBook screen works fine so what I just do is unplug and re-plug in the DVI plug and everything is good again.
My 24 inch Dell monitor worked fine with my M1330 and other computers so I know it's not that. Does anyone have the same issue or maybe give me some light on this?
View 24 Replies
View Related
Jun 27, 2009
I have a 22" Dell external monitor on my MBP. I know that I just close the cover to my MBP to shut off the screen. What do I do in those instances that I want to use both screens? There has to be something simpler than restarting the MBP?
View 3 Replies
View Related
Aug 5, 2009
As said, my current set up is an HDMI - DVI cable (HDMI to monitor and DVI to adapter) and my DVI - mini DisplayPort adapter, everything is connected fine but when I turn on the monitor, it says cable not found... and nothing is displayed on the screen but on the Macbook side of things, it sees the monitor is connected (I can extend the screen and leave the screen) but other than that, it appears I cannot get an image on the monitor, pressing every button on the monitor does not work either.
Any other information that may seem necessary, let me know. I tried clearing my PRAM and clearing the power and such but nothing seems to work.
View 1 Replies
View Related
Dec 18, 2009
There's some known documented issues concerning the Nvidia graphics chip in the particular model of macbook pro I have.
Basically when turning on the machine, the screen is filled with black & white horizontal strips like a piano keyboard, but thats it - it doesn't actually boot up fully at all, you cannot hear the hard drive running !
Would the hard drive have anything to do with this ?
I explained this to apple telephone support & they informed of the article
[URL]
[URL]
& stated that the symptoms were linked.
On taking the mac to an apple store they ran a special 'firmware' boot up 'test' using an instore ipod to determine if it was a faulty Nvidia chip, so as to prove to Nvidia, the company funding the repairs whether it is that to blame.
Because the machine didn't even boot up & complete the 'test' they couldn't say whether it was the graphics chip - so 'no free repair' under extended warranty & the final answer was as usual ' buy a new logic board' that will cure it !
View 2 Replies
View Related
Jun 23, 2012
This happens every time when I turn on my computer or restart. Otherwise all other computing and display are fine once I get passed the log in screen.
Info:
MacBook Pro, Mac OS X (10.7.4)
View 1 Replies
View Related
Mar 11, 2010
I recently installed the Hitatchi 7k500 in my new White Unibody. Istat pro is showing a HD bay temp of 25 degrees C. When I had the original 250gb HD in, istat showed a HD bay temp and a HD temp. Now I only have a HD bay temp.
View 1 Replies
View Related