So I bought my 13inch MacBook Pro Retina two weeks ago. 70% of the time when opening the lid the screen will not turn on but my keyboard backlight will. I then have to either close the lid and open again or press the power to put the system to sleep and wake again. It seems the system is working fine just not the screen.Â
I have tried the SMC and PRAM reset which seemed to work for half of the day, now the problem is back.
macbook pro doesn´t turn on BLUE screen,
Info:
MacBook Pro, Mac OS X (10.6.8)
My Macbook doesn't turn on, it just show a white screen and after a while a big question mark blinks but nothing else, cannot click the question mark, cannot do anything.Also it makes a funny noise.
View 3 Replies View RelatedThis happens randomly. I don't know if it's the new hard drive I put in there, which I doubt.
The screen flickers from time to time (nVidia issue.) Don't have the time to take it in right now, but I will.
I'm not entirely sure how long my iMac has been doing this, maybe two weeks? When I try to wake it from sleep, the screen does not turn on. At all. At first I thought this was because my mouse and keyboard might not be functioning correctly, naturally the only remedy was to turn the computer off with the power button and to restart it (which took an abnormally long time). Today I remote connected with Back to my Mac screen sharing and it did not turn on either. I know it was awake because when I pressed the brightness buttons on the keyboard, it responded on my MBA's view of the screen. Normally, Back to my Mac does turn the screen back on. Anyone else have the same problem? It doesn't seem to matter WHEN it goes to sleep either. I've tried resetting the PRAM already and no dice.
View 1 Replies View Relatedmy laptop (macbook pro) doesn't turn on, because the battery doesn't work (may be because of moisture), and the 7 battery lights on the left side are off, and when I plug the charger in, the light on the magnetic socket turns on so dim ..
Info:
MacBook Pro, Mac OS X (10.7.3), MC 700
I've tried turning it ff and on via the power button several times, but it always goes back to the white screen.
Info:
MacBook Pro (13-inch Mid 2010)
My MacBook pro 15 doesn't turn on, I pressed the power buttom but nothing, no sounds, no lights, no signals of life. Only the battery bottom is responding and the battery is totally full. I bought it in April 2010 and the battery is not removable.
Info:MacBookPro, Mac OS X (10.7.3)
My MacBook Air was purchased in September 2011 and I've really enjoyed this computer. The complaint I have is that it wouldn't turn on about two weeks ago. I had to bring it to an Apple Store and the logic board was replaced. The service was good and it was a one day turn around time. Now the computer is down again with the same symptoms and I've tried the recommended procedures to try to turn it on without any luck.
Info:MacBook Air, iOS 5
My laptop was fully charged and it went to sleep. About an hour later, it's as if it is dead. The screen is black. I can't even turn it on. None of the lights are on. I plugged in my 2 old! charger and it won't been light up. I have had no problems with this charger and have tried different outlets. My laptop was fully charged so I don't understand why it's not turning on. I can't reset anything because it doesn't even boot up. I near how beeps and chimes. I let it charge for a while and still the charger isn't lighting il and the laptop won't turn on.
Info:
MacBook Pro, OS X Mountain Lion (10.8.2)
I am really upset because my trusty MacBook pro running the latest version of leopard decided not to turn on today. I already tried resetting the pram but I don't even hear the chime. I can hear my HD stRt but it downtown access anything. It just spins. Do you thnk I need a new logic board? I really hope not because They are like 400 on eBay. I tried taking the battery out And holding pwr button.
View 4 Replies View RelatedI removed my battery and plugged the power cord, the small green light doesn't come and the mac book pro doesn't turn on.
View 19 Replies View RelatedWhen I switch on my MacBookPro OX S Lion it stays on a grey page with the apple logo but that's all ,what do I have to do ?
Info:
MacBook Pro
So this morning I woke up and went to press the power button of my Macbook, but nothing happened. I noticed that there is no white IR light and the fan doesn't respond. I checked the battery, it was at full. The power cable was also green when i plugged it into the Macbook. However, it still wouldn't turn on.
Just a general comment, I use the Macbook as a printer server and to browse the internet, so nothing intensive is forced onto the Macbook.So then I tried resetting the SMU, didn't work. I tried turning it on with only battery , and then with only power source, both didn't work either.I have never spilled anything on this macbook, never dropped it, smashed it, or abused it in any way. However, it is 2 years old and I never bought Applecare (Usually, if something is defective, it will show within the first 30 days). I assume it's a logic board failure, and it's going to cost around 700 to fix (which i'd rather just get a new macbook).
I was wondering if anybody know of a reason why the logic board broke, or if there is any remedies that i haven't tried yet?Also, I'm thinking of pawning it off on ebay and then save up and wait for the Macbook Pro refresh. Does anyone have an estimate on how much I can get for a broken Macbook (screen is fine, 4gb of ram (i might replace it w/ 2gb instead) 250 gb HD (might replace with 80gb HD instead), 2.0 ghz c2d (prbly useless cuz the logic board is fried)
I haven't used my mac for a month but it use to work perfectly fine. I tried to use it but it wouldn't turn on. When i plug the magsafe connecter the led goes orange. But when i press the power button it doesn't turn on. i tried smc reset using left shift, control and option (and power button) while charging and not charging but it doesn't work.
View 1 Replies View Relatedmacbook air dosen´t turn on and keeps beeping
Info:
MacBook Pro with Retina display, OS X Mountain Lion (10.8.2)
A few hours ago i tried to turn it on but it only showed the apple screen for a few seconds and turn off automatically.. i can't turn it back on anymore..
It doesn't response to the power button nothing happen after pressing the button. I am sure it is charged... what should i do..?
Info:
MacBook Pro (Retina, Mid 2012)
Macbook doesn't start immediately, only after a few attempts... Like the board doesn't get power immediately....Â
What I've done:Â
1. Replaced SSD
2. Replaced battery
3. Upgraded from Mountain Lion to Yosomite
4. Reset PRAM & SMCÂ
Specs:Â
MacBook Pro (17-inch, Mid 2009)
3,06 GHz Intel Core 2 Duo
8 GB 1067 MHz DDR3
NVIDIA GeForce 9400M 256 MB
Recently I have a big problem with my macbook Pro, I don't know why but my device doesn't turn on when I shut it down. and I should wait for hours or sometimes for a whole day!!! what should I do?
View 9 Replies View RelatedWhen I turn on the power, it doesn't work but the question mark appears. What am I supposed to do? (question mark inside of a file mark)
Info:
MacBook Pro, iOS 5.1
My daughter has dropped her ageing MBP, bent the screen lid and now the screen is no longer usable. We have other Macs available to access the data on the screen if we could turn on Screen Sharing on the damaged MBP running Snow Leopard.Â
Info:
MacBook Pro, Mac OS X (10.6.8)
Computer starts (keyboard lit, music plays, caps lock light on), but no screen. I need to open and close 2 - 30 times before the screen will turn on. Once on, the computer works perfectly. I've tried PRAM and safemode reset.
View 5 Replies View RelatedI'm trying to rig up a system for work that will allow me to remotely monitor an industrial job site for a few hours each day and control some equipment. I've got the ability setup to remotely control the equipment, but I need a dedicated camera on an engine tach and pump presser gauge. My original plan for a remote camera is not working and time is running short, so I thought I could end up using the new MB I got recently with the integrated webcam, and VNC into the computer. I tried it out today and it seemed to work well except for two things, both related to the display being on.
1) There is no power available so maximizing battery life is a must
2) I was getting a bit of a glare off the gauges from the screen that made viewing a bit difficult.
I think both would be solved if I could run the MB with the screen off, but I don't know if this is possible.
I launched Mail as I ordinarily do. It opened up, but the header bar was grayed out. Finally I managed to open program via Message/Go To/ Inbox, but no messages appeared in any of my mailboxes (even though I had several still in there from today). Nothing is happening, I even can't quit teh mail program.
Info:
MacBookPro, Mac OS X (10.6.8)
Every time I start my MacBook Pro up, it opens all of these applications up. I know there is a way to turn it off, but I can't remember how.
Info:
MacBook Pro, Mac OS X (10.7.3)
I hear the initial "turning on" sound, buy after that there is nothing.What is wrong and how can I fix it?
View 11 Replies View RelatedIs there a way to disable the �pinch open and close� feature on a MBP trackpad? I swear, it�s going to put me in therapy. Every time I need to scroll through massive spreadsheets for work, if my fingers separate by even a hair, the trackpad reads it as a pinch, then the document suddenly balloons to massive proportion or shrinks to infinitesimally tiny print. Seems there ought to be a simple way to turn the thing off, but for the life of me, I can�t find it.
View 3 Replies View RelatedI have set in my Energy Saver Prefs to have my display turn off in two minutes and have the computer never turn off while plugged in. I am running MBP with NVidia GeForce 9600M (I have the option to go to "Better Battery Life" and switch it to 9400 if I so choose.)
Is anyone else experiencing this problem? Can somebody try to replicate it and tell me if it's just me? This happened when I installed 10.6.3, .2 was fine.
My brand new iMac doesn't turn on on the next day
Info:
iMac, Mac OS X (10.7.4)
I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen. How do I get it to open programs and act like a monitor?
Info:iPad, iOS 4.3.1
