MacBook Pro :: Regarding Two Hard Drive Setup?
May 7, 2012
I have a 2011 Macbook Pro that I have used with an OWC Data Doubler. I have placed my original Toshiba drive (120gb) in the DataDoubler cage, which is what I am booting from. The new OWC SSD that I installed is a 240gb. I use this machine for video editing (using Premiere Pro CS5) and also would like to dual boot into Windows. I would like some suggestions for setup. A couple questions:Â Will it perform better if I am booting from my factory HDD slot, or is it okay that my Startup Disk is in the data doubler?Should I set up a raid? Would a striped raid allow me to NOT lose any space; from what I understand if I set up a Striped (Raid 0) array, I would have a total of 360gb of storage. If I set up a Raid 1, it would simply mirror my smallest drive, so I would be losing some space. Am I thinking this through right.Should I just scrap the raid? If so,, I would like to move my Home folder to my other drive, is this possible? Basically I would split my 240gb drive (120gb to Windows and 120gb to OSX). Then I would use the smaller drive (120gb) as my scratch disk.
Info:
Mac OS X (10.7.3)
View 2 Replies
ADVERTISEMENT
Sep 5, 2014
Basically I have a 750GB hard drive in my Macbook Pro and over 300GB is taken up with 'BackUp' data. This is more than the total of everything I have on the drive other than that. Time Machine has always been setup on an external drive and when searching all files on the Macbook there is nothing for backup files so don't know where it is coming from.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
View 3 Replies
View Related
Dec 10, 2014
How do i transfer information from my external hard drive to my new mac during initial setup?
Info:
Mac Book
View 2 Replies
View Related
May 21, 2008
Best way to set up my Mac pro. I have 3 Seagate 1tb drives and the stock 320gb drive installed in my system. I currently have Windows installed on the 320gb drive which I very rarely use. I have 1 1tb drive setup as my boot disk with all of my data on it. Another 1tb drive is currently used as a time machine backup of the boot disk. I just purchased and installed a 3rd 1tb drive but am trying to find out the best possible way to set things up. My intention is to slowly convert my DVDs in to digital format and store them on my mac pro. Aside from a media station I do a bit of gaming and tinker with final cut and photoshop. Any recommendations on the best way to set up these drive? I have read a bit about raid 0 and understand that improves performance and seems like a good option. If so, is it possible to set up raid 0 without redoing everything that I currently have on my first disk?
View 3 Replies
View Related
May 16, 2010
I am making a laptop switch from PC to Mac (MacBook). In the past my PC would always get bogged down because of too much music, pictures, and movies and I vowed that this would not happen on my new Mac. In addition, I plan on getting the iPad too when the price drops. What I would like to do is have a central, wireless, "server-like" drive that both the MacBook and the iPad could draw from.
My first thought was the TimeCapsule, but the 2 TB model is pretty expensive, and I don't like the idea that if the router or hard-drive fails then I am out of both.
My idea now is to get an airport extreme and hook up an external hard-drive. My quesion is this: can I effectively use an external hard-drive as my main hard drive? It seems that all of these external hard-drives are marketed as "back-up." What external hard-drive should I look at?
View 3 Replies
View Related
Oct 16, 2007
Pardon the ignorance here, our mac guys are no longer with the company so I'm doing my best to get stuff working over there... I've got a powermac G5 with no hard drive. It died/used elsewhere/stolen, no idea. I'm assuming the rest of the machine is in working order. We purchased a new 250 Gb Hitachi SATA hard drive. Plugged it in and booted off the OS X install disc. Get the apple wallpaper with the spinning "hourglass". Shortly after I get a message in a few languages telling me I need to restart the computer by holding down the power button. We've tried another install disc, same result. I put the hard drive in another mac and formatted it, OS Extended (journaled). Same result. There was some Kingston ram installed in the machine, I removed those 2 sticks, same result.
View 6 Replies
View Related
May 13, 2009
1. Can I setup the external hard drive to be partitioned so I can keep photos on one partition and the backup on another? How?
2. Can I hook an external hard drive up to a wireless router and have wireless backups done. It is a Linksys router and has a USB port on the back. Can I? How?
3. If I were to hook up the external hard drive to the router (if possible), can Windows and Mac both view it and access and write files on there.
View 1 Replies
View Related
May 28, 2009
I've done a lot of research on backup setups, and here is what I'm leaning towards. I'd love your thoughts. I have a 13" macbook aluminum and 24" LED Cinema Display. I use my computer for both a small business I run and law school. First, I plan on replacing the 160GB internal drive with a 500GB 5400rpm Seagate Momentus. Then I plan on getting an external 1TB external drive (leaning towards the WD Elements or Seagate FreeAgent Desk) that I will leave connected to my Cinema Display and utilize Time Machine. For my second level of backup, I plan on using one of the online/cloud backup services (leaning towards Mozy, Carbonite or Backblaze) and setting it to back up the system on a semi-regular basis (perhaps every six months). Any suggestions on a better setup? This really represents the extent of my budget, so I'd like to not spend much more (unless its really necessary to be safe). Also, any thoughts on what online setup would be best for a backup every six months (I don't ever anticipate having much more than 350GB of data).
View 23 Replies
View Related
Feb 17, 2010
I'm planning on purchasing a new MBP whenever Apple releases the upgraded models. I was also planning on purchasing a 1TB Time Capsule because 1. I need a new wireless router and 2. I wanted to be able to transfer recordings from my DirecTV DVR to the TC for later viewing. In addition to being able to use Time Machine relatively seamlessly, I liked how TC offered both the wireless router and the external hard drive in one solution. But after digging around a bit, I've found that the TCs are somewhat unreliable (overheating, 5Ghz signal issues, etc.) and it won't actually allow for transfers from the DVR. So my question is...what would I need to buy to be able to utilize Time Machine in a manner that is similar to TC allows and also be able to transfer recordings from my DVR? Or even better, is there a way to set up TC to be able to do what I'd like for it to be able to do?
View 12 Replies
View Related
Sep 9, 2010
My old MBP has a 320gb HD, my new iMac has a 500gb HD. What I am thinking is to create a partition on my new HD for 320gb and leave the remainder 180gb alone. Can I do this and is it possible? My new iMac has snow leopard and my old MBP is running leopard. Will this cause problems?
View 9 Replies
View Related
Mar 26, 2007
A while back I bought an external hard drive for my PC, but then ditched the PC and decided to hook up the hard drive to my Mac. My External Hard Drive is a: 149.1 GB WDC WD 16 00JB-00GVA0 The problem is, I can access all the information but it will not let me do anything on the external harddrive (Like creating a file, copying and pasting a file on there, etc.) However, I can save Torrent downloads on the harddrive, but they do not show up on the actual external hard drive. But, when I press the "Find/Show directory" button in Bittorrent it does find the files. Is there something I need to do, Or is it just incompatible with my Mac?
View 4 Replies
View Related
Apr 19, 2012
How do I get Time Machine setup on this hard drive?
Info:
Mac OS X (10.7.3)
View 1 Replies
View Related
Dec 1, 2014
First the Details:
MacBook Pro, Retina, 15-inch, Late 2013
OS X Mavericks 10.9.5
USB 3.0 External Hard driveÂ
I am currently using an external drive for my user storage. Right now I log in with a separate User account to mount the drive, log off, and then log in with my user. I am trying to remove the extra steps so I can boot my Mac and log right in. I have not found any method that pertains specifically to Mavericks, and all of the methods I have tried for older OS versions do not seem to work properly. Â
Info:
MacBook Pro (Retina, 15-inch, Late 2013), OS X Mavericks (10.9.5)
View 1 Replies
View Related
Sep 1, 2009
Got a new MBP last month to replace my white MacBook - loving it as an upgrade but one gripe - if I'm sat using it on my knee I regularly hear the "click" type noise of what I imagine is the protection of the hard drive because it thinks it is being dropped.
I never heard this on my old Mac and while it's not a huge issue it is a bit disconcerting, as though I'm being told off for moving it in a fairly responsible way.
View 5 Replies
View Related
Jul 27, 2009
I have an aluminum unibody macbook from October 2008. I'm looking to upgrade the 160 GB hard drive inside to a 500 GB one I'm considering from Newegg. Would it be possible to migrate/copy/clone the entire contents of my current hard drive to the 500 GB one? I also have a section of my current hard drive partitioned for Bootcamp. Would this affect my ability to transfer everything over?
If this is possible at all, how can I go about doing so? If there are steps laid out somewhere, I'd appreciate a referral. Sorry if my question is a little elementary, but I did a search on these forums and also google and nothing really came up
View 1 Replies
View Related
Apr 4, 2012
You can not post a blank message.
Info:
MacBook Pro (15-inch Early 2008), Mac OS X (10.3.x)
View 1 Replies
View Related
Mar 31, 2012
Recently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive). After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
View 1 Replies
View Related
Sep 9, 2014
Macbook Pro 17" Early 2011Â
Notes. Failed HDD ASD Test.  A new hard drive was installed in September of 2011 after the previous hard drive failed. Having worked well until now the system seems to give the same problems as it had previously. I am wondering if this is a compatibility issue as others have pointed out. Â
I have been told by the technician my only option is to replace the entire hard drive again for the second time with a new one. However to my understanding a ASD test is very specific and this my not be necessary? Further I am attempting a final backup just in case. I don't have to take it in where I could just back it up myself without the system shutting down.
Info:
Mac Pro
View 5 Replies
View Related
Dec 10, 2009
This is a re-formulated post about using a SSD for boot and apps and a HDD in the optical bay for storage of files. I still want to post it here due to the MacBook Pro specifics surrounding the drives. I am putting in a 160 for the SSD / boot, as it stands right now the drive will have not more than 60GB on it with my music, 13+ GB of mail archive and other files. The rest, movies, websites, photos and any other media will reside on the storage drive in the optical bay. Applications such as iView Media Pro and Mail Steward have safe mount / unmount behavior in terms of operations so those should be fine when the disk is unmounted. I expect to have both drives running most of the time unless is gets rough or I need juice for longer spans. What I am wondering is what strategies for keeping a smooth running combo of twin drives have people been using in terms of keeping as many files off the SDD but not corrupting the OS when reading a disk and then having it unmounted?
I know the "other" thread is a good source but it is 23 pages long at this point but enough people are doing this now that it will be a common question as some point and it is really only touched upon a few times in the other thread. I have used CCC to dupe my current data in 2 locations, so I am safe to muck around with this now. I would expect it to be fine to boot off of any one of the three drives to move the 60GB working set and OS onto the SSD. Should I use one of my external backups to do the initial boot and then re-boot out of the optical to set up the clone to the SSD? It kind of makes sense to me given the fact that the HDD with the native OS will have moved from one SATA location to the other. This just seems different to me than my desktop because this is a mobile device and the way power / drives and other little details interact is worth looking into.
View 1 Replies
View Related
Sep 11, 2009
I'm replacing my old 120gig hard drive with a new 320gig hard driveWhen Ive got the new hard drive installed can I just put the old hard drive in a enclosure kit/caddy and copy my music/movies/etc across to the new hard drive?Or do I have to copy the data off before I remove the old hard drive?
View 3 Replies
View Related
Jun 21, 2012
I'm attempting to move from my Mid 2010 13" MBP to a new Retina. I have a fresh Time Machine Backup but it's been over an hour and I'm still stuck on 'Looking for other computers'. This is a brand new USB3 drive which is working perfectly on the old machine.
View 1 Replies
View Related
Sep 6, 2009
Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
View 3 Replies
View Related
Oct 2, 2009
I bought a new 500GB WD hard drive for my Late 2008 MacBook to upgrade from my 250GB drive. I have a hard drive enclosure, but I was wondering if when I install my 500GB hard drive, would I be able to use the enclosure to transfer files from my 250GB drive? I hope this was specific enough to get a clear response. If not, I'll try re-wording my question.
View 7 Replies
View Related
Sep 9, 2009
My PowerBook G4 (Alum) died. I've had it for 4 years, taken it with me to Alaska and all over the lower 48, and have had nothing but happy experiences. I knew she was gonna go, but I was hoping she'd hold on until I could afford a MacBook. Alas, no. The problem appears to be the ability of the logic board to communicate with the hard drive. I can hear the HD spin, but even with Disk Warrior, I cannot locate it. The Mac Geniuses at my local Apple store confirmed this and gave me a shoulder to cry on. I've run Disk Warrior, Disk Utility, and tried finding it using the target disk mode - no luck.
The problem is that I've got 4 years of teaching materials, 6000 songs, and irreplaceable pictures on the HD, so I can't bring myself to just trash it. It's true that you only fail to back up you stuff once. This is my once. I've heard that with PC hard drives, you can just drop the old HD into a USB HD box and use it as an external HD. I can't afford professional data retrevial, and I want to give this option a try if it'll work with a Mac HD. Any ideas or suggestions?
View 7 Replies
View Related
Jun 3, 2012
How do i play media files from my external hard drive without transferring the files to my mac hard drive? I have a lot of media files and want to be able to play them soley from my external hard drive.Â
Info:
iMac (27-inch Mid 2011), iOS 5.1.1
View 2 Replies
View Related
Oct 17, 2009
I have an (Early 2008) Mac Pro in standard configuration. The hard drive is just about full and would like to add a second internal hard drive.
I have read that some people choose to keep just the OS on one hard drive and everything else on the drive. Is this the best way to go? Which hard drive would the applications go on (with the OS?)?
The main use of this machine is for graphics (Adobe CS3 and Aperture).
View 2 Replies
View Related
Nov 22, 2006
My PM G5's Hard Drive has been making wierd noises lately and I'm really beginning to worry that it's failing. How can I be sure?
View 1 Replies
View Related
Sep 9, 2009
I know this is going to be an incredibly easy fix, but I can't find it. The Hard Drive on my new iMac is not appearing on my desktop, nor is it appearing in the "Device" menu in Finder.
View 1 Replies
View Related
Nov 12, 2009
if i delete files off my internal hard drive (Macintosh HD), will it still be on my external hard drive or will it just add to it?
View 1 Replies
View Related
Mar 9, 2012
I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer
Info:
iMac
View 7 Replies
View Related
