Pardon the ignorance here, our mac guys are no longer with the company so I'm doing my best to get stuff working over there... I've got a powermac G5 with no hard drive. It died/used elsewhere/stolen, no idea. I'm assuming the rest of the machine is in working order. We purchased a new 250 Gb Hitachi SATA hard drive. Plugged it in and booted off the OS X install disc. Get the apple wallpaper with the spinning "hourglass". Shortly after I get a message in a few languages telling me I need to restart the computer by holding down the power button. We've tried another install disc, same result. I put the hard drive in another mac and formatted it, OS Extended (journaled). Same result. There was some Kingston ram installed in the machine, I removed those 2 sticks, same result.
I'm looking to put a hard drive in G4 PowerMac 867Mhz. The machine would have been bought circa 2003.It's running OS X Server 10.2.I'm looking at a 300Gb hard drive.
A while back I bought an external hard drive for my PC, but then ditched the PC and decided to hook up the hard drive to my Mac. My External Hard Drive is a: 149.1 GB WDC WD 16 00JB-00GVA0 The problem is, I can access all the information but it will not let me do anything on the external harddrive (Like creating a file, copying and pasting a file on there, etc.) However, I can save Torrent downloads on the harddrive, but they do not show up on the actual external hard drive. But, when I press the "Find/Show directory" button in Bittorrent it does find the files. Is there something I need to do, Or is it just incompatible with my Mac?
i added a 2nd optical drive (Pioneer 115D) to my mdd dually 1.25 G4. BUT, i'm sure I didn't do it right. Sure, it recognizes the drive, but I put them on the same bus (Ata-33). I should have them on separate bus', but I have 2 hd in the rear ata-100 drive carrier and 1 in the front ata-66 carrier. Can anyone tell me how to effectively put them on separate bus'? is there a website with specific directions on how to do it this way? The reason why I was told to keep them on diff. bus' is b/c they won't function as well (data lockups b/c same bus can't handle data).
I've cleaned all my components except the HDD bay fans on my G5 Powermac. I've searched google about 5 pages deep and no luck. I have the service manual but it doesn't show how to remove those fans either. Anyone know of a link that shows how to remove them? I'm very good at taking stuff apart but I just can't seem to take this fan assembly apart. Maybe it's my kryptonite?
Okay so i have the powermac M5183, I just got it and im going to be doing some overhauling ive already overclocked the processor and that worked wonders, now im on to my next step, I have no problem identify what kind of hard drive it is and the size, the only part i get confused about is when i think what the biggest hard drive i can put in, i would like to put a 320gig in or at least 250. But google says that on some of the powermacs you can't exceed 128 gig's. So i turn you you guys, is the model i have going to work with a 250/320? or am i
I have no way of finding out the password to get through. I am doing a clean install of Mac OS X v10.3.2, using a pc keyboard at the moment.C-key isn't responding, so I held down alt. I am dead end with this firmware password protection.
I have a dual 1.25gHz powermac G4 that has been serving me amazingly well for the last 5 years. Until yesterday. Turned the computer on, ran like normal, opened Safari then Poomf! Off! When I press the power button it lights up but nothing kicks in. This made me think power supply or motherboard.So luckily I have access to other G4's at college. Thinking it was the power supply I swapped it out. Pressed power, same problem..Replaced the power supply in replacement machine, swapped HD over to new machine. Booted up for 2-3 mins, boomf, off, same issue.Frantically tried again, C Major tone.. Boomf, off.. Pressed and held and got 1 long beep. Which is apparently a RAM issue? Kept it held. Nothing.Took HD out and replaced machines to original states. Even tried swapping the battery between them.Borrowed G4 now won't stay on for longer than 10 mins. My old G4 still won't do anything with any drive in.I've tried placing my original drive as a slave in the borrowed G4 and same problem, no power up. As soon as its disconnected up it roars.
Info: Dual 1.25 G4 2GB Ram, Intel Macbook 2.0ghz 3GB Ram (Leopard), iPhone 16GB, Mac OS X (10.4.11)
I bought a brand new Seagate 400Gb hard drive for my PowerMac G4 MDD FW800. I installed it in the back bay, as a slave drive. When I power on the Mac, I get a blank grey screen. The original hard drive with OS 10.4.11 is set as the master, so I don't know why it won't boot properly. I've checked for bent pins, and I don't see any obvious ones, so I'm completely confuzzled.
Basically I have a 750GB hard drive in my Macbook Pro and over 300GB is taken up with 'BackUp' data. This is more than the total of everything I have on the drive other than that. Time Machine has always been setup on an external drive and when searching all files on the Macbook there is nothing for backup files so don't know where it is coming from.
Best way to set up my Mac pro. I have 3 Seagate 1tb drives and the stock 320gb drive installed in my system. I currently have Windows installed on the 320gb drive which I very rarely use. I have 1 1tb drive setup as my boot disk with all of my data on it. Another 1tb drive is currently used as a time machine backup of the boot disk. I just purchased and installed a 3rd 1tb drive but am trying to find out the best possible way to set things up. My intention is to slowly convert my DVDs in to digital format and store them on my mac pro. Aside from a media station I do a bit of gaming and tinker with final cut and photoshop. Any recommendations on the best way to set up these drive? I have read a bit about raid 0 and understand that improves performance and seems like a good option. If so, is it possible to set up raid 0 without redoing everything that I currently have on my first disk?
My PowerBook G4 (Alum) died. I've had it for 4 years, taken it with me to Alaska and all over the lower 48, and have had nothing but happy experiences. I knew she was gonna go, but I was hoping she'd hold on until I could afford a MacBook. Alas, no. The problem appears to be the ability of the logic board to communicate with the hard drive. I can hear the HD spin, but even with Disk Warrior, I cannot locate it. The Mac Geniuses at my local Apple store confirmed this and gave me a shoulder to cry on. I've run Disk Warrior, Disk Utility, and tried finding it using the target disk mode - no luck.
The problem is that I've got 4 years of teaching materials, 6000 songs, and irreplaceable pictures on the HD, so I can't bring myself to just trash it. It's true that you only fail to back up you stuff once. This is my once. I've heard that with PC hard drives, you can just drop the old HD into a USB HD box and use it as an external HD. I can't afford professional data retrevial, and I want to give this option a try if it'll work with a Mac HD. Any ideas or suggestions?
I have a 2011 Macbook Pro that I have used with an OWC Data Doubler. I have placed my original Toshiba drive (120gb) in the DataDoubler cage, which is what I am booting from. The new OWC SSD that I installed is a 240gb. I use this machine for video editing (using Premiere Pro CS5) and also would like to dual boot into Windows. I would like some suggestions for setup. A couple questions: Will it perform better if I am booting from my factory HDD slot, or is it okay that my Startup Disk is in the data doubler?Should I set up a raid? Would a striped raid allow me to NOT lose any space; from what I understand if I set up a Striped (Raid 0) array, I would have a total of 360gb of storage. If I set up a Raid 1, it would simply mirror my smallest drive, so I would be losing some space. Am I thinking this through right.Should I just scrap the raid? If so,, I would like to move my Home folder to my other drive, is this possible? Basically I would split my 240gb drive (120gb to Windows and 120gb to OSX). Then I would use the smaller drive (120gb) as my scratch disk.
I am making a laptop switch from PC to Mac (MacBook). In the past my PC would always get bogged down because of too much music, pictures, and movies and I vowed that this would not happen on my new Mac. In addition, I plan on getting the iPad too when the price drops. What I would like to do is have a central, wireless, "server-like" drive that both the MacBook and the iPad could draw from.
My first thought was the TimeCapsule, but the 2 TB model is pretty expensive, and I don't like the idea that if the router or hard-drive fails then I am out of both.
My idea now is to get an airport extreme and hook up an external hard-drive. My quesion is this: can I effectively use an external hard-drive as my main hard drive? It seems that all of these external hard-drives are marketed as "back-up." What external hard-drive should I look at?
1. Can I setup the external hard drive to be partitioned so I can keep photos on one partition and the backup on another? How?
2. Can I hook an external hard drive up to a wireless router and have wireless backups done. It is a Linksys router and has a USB port on the back. Can I? How?
3. If I were to hook up the external hard drive to the router (if possible), can Windows and Mac both view it and access and write files on there.
I've done a lot of research on backup setups, and here is what I'm leaning towards. I'd love your thoughts. I have a 13" macbook aluminum and 24" LED Cinema Display. I use my computer for both a small business I run and law school. First, I plan on replacing the 160GB internal drive with a 500GB 5400rpm Seagate Momentus. Then I plan on getting an external 1TB external drive (leaning towards the WD Elements or Seagate FreeAgent Desk) that I will leave connected to my Cinema Display and utilize Time Machine. For my second level of backup, I plan on using one of the online/cloud backup services (leaning towards Mozy, Carbonite or Backblaze) and setting it to back up the system on a semi-regular basis (perhaps every six months). Any suggestions on a better setup? This really represents the extent of my budget, so I'd like to not spend much more (unless its really necessary to be safe). Also, any thoughts on what online setup would be best for a backup every six months (I don't ever anticipate having much more than 350GB of data).
I'm planning on purchasing a new MBP whenever Apple releases the upgraded models. I was also planning on purchasing a 1TB Time Capsule because 1. I need a new wireless router and 2. I wanted to be able to transfer recordings from my DirecTV DVR to the TC for later viewing. In addition to being able to use Time Machine relatively seamlessly, I liked how TC offered both the wireless router and the external hard drive in one solution. But after digging around a bit, I've found that the TCs are somewhat unreliable (overheating, 5Ghz signal issues, etc.) and it won't actually allow for transfers from the DVR. So my question is...what would I need to buy to be able to utilize Time Machine in a manner that is similar to TC allows and also be able to transfer recordings from my DVR? Or even better, is there a way to set up TC to be able to do what I'd like for it to be able to do?
My old MBP has a 320gb HD, my new iMac has a 500gb HD. What I am thinking is to create a partition on my new HD for 320gb and leave the remainder 180gb alone. Can I do this and is it possible? My new iMac has snow leopard and my old MBP is running leopard. Will this cause problems?
i just installed a new 2nd, (750 gb) hard drive into my g5 because my first 250gb is nearly full. I'm trying to launch logic but the file is way to big. It wont let me install this program from my new, second hard drive because the message i get is that it supposed to launch from the primary or running hard drive. Can anyone tell me how i can make my second hard drive my new primary hard drive? I got the .dmg for my leapord osx. but not the originals anymore. can anybody help me with this. i'm pretty sure it's simple, i just don't know how to do this.
I am currently using an external drive for my user storage. Right now I log in with a separate User account to mount the drive, log off, and then log in with my user. I am trying to remove the extra steps so I can boot my Mac and log right in. I have not found any method that pertains specifically to Mavericks, and all of the methods I have tried for older OS versions do not seem to work properly.
Info: MacBook Pro (Retina, 15-inch, Late 2013), OS X Mavericks (10.9.5)
I have an iMac G4 with a failed HD. I know this because it boots from my external drive. Does anyone know where I can find the Hard drive part # and a take-apart guide?
My friend gave me his old Apple cube G4 + 15" Cinema display in like 1000 pieces. Its completely teared apart. I tried a lot, but it doesn't work. The original IDE cable wasn't included, so I bought one for 2 cents. It should work or not? Maybe the powersupply. I'm not sure. I don't believe actually that the hardware itself, like the motherboard is broken. When everything is into place and I connect the cube to the powersupply it boots immediately. I don't have to do anything. Harddrive spins and the superdrive makes some noise as well. This repeats itself every 5 seconds. The screen is connected and gets power through DVI, but no display. Both the cube and display have touch enabled buttons to switch it on, but they do not respond (I guess).. Motherboard gives 2 light. DS1 is green, DS2 is red.
I want to put my old 15" PowerBook hard drive into an external case. I pulled the hard drive out of the PowerBook. And I purchased a NexStar CS 2.5" SATA to USB 2.0 external case. But the connections don't match. What do I need to do? Do I need to buy some sort of adaptor? Hard drive is a Hitachi 120GB 5400RPM (model # HTS541612J9AT00) 2.5" Sorry, these photos are blurry as hell. Picture of hard drive pins:
Pins are in the following configuration (1's represent pins):...............
There is a Powermac G5 available in my area for $450. Its a dual core 2.3 and a nvidia GeForce 6600 and he is including a 20 inch ACD. I don't know if its a great deal, but I think it would be great, because I could build something wild in that case later.
I recently bought a PowerMac G4 1.42GHz Dual Processor. It has 2 gigs of RAM on it. It was a fair deal I think. The "thing" is still looking like new and shiny. Even the insides are still tidy and intact. My question is, would I still be able to pump more juice from this beast. It still run fast comparable to some decent windoze box. Up to how much processor can i be able to squeeze out the CPU and if possible, how to?
I have a G4 Power Mac. It's the "digital audio" model that has been upgraded with a 1.2Ghz G4 processor. It works well except for one thing. It shuts down randomly and suddenly. Then after 5 or 10 minutes it turns itself back on, reboots and runs fine. (It is set to re-boot after a power failure.)I suspect what is happing is the power supply is turnning itself off due to some kind of a thermal, self protection switch. The fan seems to work but the PS gets warm.What's the cure? Replace the power supply? If so where to get a new(er) one?
I have a G4 PowerMac that will not boot up. I power up the computer and it stalls on a grey screen with text prompting me to type <<boot>> if you wish to continue...or something like that. Does anyone have any advice on how I might troubleshoot this? The computer was working fine for a few days before this occured. It has been unused and sitting is storage for a while.
