MacBook Pro :: No Longer Connects To Network After AirPort Utility Update?
Jan 6, 2011
Software Update ran yesterday and I installed the AirPort Utility update (version 5.5.2), and now my MBP no longer connects to my home network when the SSID broadcast is disabled. When I enable the broadcast the network shows up in the list of available networks and I can connect to it, then I can disable it again and the MBP stays connected. But if it's disabled to begin with it won't connect.
I never had this problem before the update, and no other devices on the network are having any issues. Has anyone else had this problem yet, or know of a fix?
Late 2008 unibody Macbook Pro running 10.6.5, all software is up-to-date except for the latest update to iTunes.
Since I update to yosemitee on 11/30 MAC mail will not connect to my mail server. I have deleted and re added the account, tried every setting that my provider has for incoming and outgoing but the problem seems to be with the apple update.Â
My late 2011 MBP (lion 10.7.3) used to connect to external displays through a VGA cable. It has stopped doing so since recently and I am trying to find out why, and how to fix it. The only changes I've applied to the system are (1) connect to a Thunderbolt display and (2) installed gfxCardStatus. The MBP and Thunderbolt display work flawlessly together, with network, USB, and firewire connections operating. gfxCardStatus has noticably increased my battery life (so I recommend it) and I'm aware that it needs to be in dynamic or dedicated GPU mode for external displays. The VGA external displays do not work when gfxCardStatus is running in either dynamic or dedicated mode, or when I disable gfxCardStatus completely so that it does not show on the process list.Â
The recent software update has caused a problem. The update for Air Port Utility was corrupted and did not download. I have run software update several times since then and nothing has changed. How do I clear out the corrupted file so update can start over? (MBP Lion 10.7.4)
I downloaded OS X 10.7.4 update and my entire airport network became dreadfully slow. I've been using my iMac as a basestation and my ibooks could find it easily...not anymore...they can find it but the connection works very slow if not at all..
Until now I have been connecting to a wifi network that I use at home. It is fairly slow so for large system updates I connect to a wifi dongle. When this wasn't working last week for the new system update, I came onto the forum and was advised to change the DNS settings for the wifi dongle. It all worked. Since the system update however, my existing network will not connect to the internet at all. It appears in the wifi list but won't connect to the internet. Also, when I started to look for a solution I realize that I do not have Airport as a choice in the wifi list in preferences.
I've had my Mac for 3 years and never had a problem with Airport Express. If I did, I would usually turn it off and then on again and it solved the problem. The last two weeks I've been using a wi-fi hotspot near my home until I get a proper internet connection at home. Suddenly, my internet stopped working. The airport recognzies the link and still connects but the internet page says i'm not connected to the internet. I've tried using diagnostics and it says it can't fix my problem. In diagnostics, the first 3-4 lights turn on, but the last two are either yellow or red. I've changed the time to make sure it was correct, I've re-started the computer several times and it still doesn't work. I don't know what it is that is not working. The airport recognizes the signal, yet I get no internet connection. And I haven't downloaded anything recently.
iBook G4 shows that the airport has full connectivity (full bars) yet it doesn't connect and states that there is no IP address. The iBook connects using its internal airport to a Netgear Router. There is a PC that runs windows that is connected to the cable modem. For a month or so both computers were able to access the internet simultaneously. All of a sudden the computers are unable to access the internet at the same time. When I attempt to connect at the same time my Mac gives me an error stating that another IP is in use and so I can't connect.
How can I give my iBook an IP address so that both computers can be online at the same time?
My iBook G4 is having network issues. Since waking from sleep, it will connect to my Airport Extreme base station, but I can't access the web, or access the router from Airport Utility.
Things I've tried so far:
*Rebooting
*Resetting the router to factory defaults
*Swapping out the router for a Linksys
*Clearing out network passwords from Keychain
I doubt it's a hardware issue, as everything works in Tiger (booting from an external drive).
When I arrive at my office and turn on my MB Air, it does not always connect to my wireless network, it sometimes connects to an un-secured wireless network locaterd somewhere else in the building. Is there a way to force Lion to always connect to a specfic network and ignore others?
I have just started a 2 week vacation. Airport express is connect in hotel room to an Ethernet cable. It is flashing amber but my iPad can connect ok but my Dell laptop can't see the wireless network or the airport express base station in the ae utility program?
I connect the Dell to the airport express via the Ethernet and forced a reset to factory settings but still flashes amber?
This might seem an odd question but I had to replace my last Airport Extreme base station as it was faulty....I've now got the newer "Dual Band Extreme Base Station". I want to avoid any conflicts with my old settings for my wireless network with my MBP. Should I uninstall the last version of Airport Utility?Is there anything else anyone would recommend before i install or connect the new hardware/software?
When I am on my wireless network at home, I cannot print to my printer (via AirPort).When I go to the router and connect with ethernet cable, the AirPort magically detects itself in seconds.I have Windows 7 computers running bonjour and they can print just fine using AirPort.I was able to print fine wirelessly to the AirPort but today it's not working.
The latest upgrade of AIrport Utility doesn't support my Airport extreme, but the old version 5.6.1 says it doesn't work in Lion. How was I managing my Airport before th 6 update? What do I do now? Will I have to get a new Airport?
I have DSL service. I have an iPod Touch and an iPad 1 that I'm trying to connect. I just upgraded both iDevices to iOS5. I've been having trouble keeping an internet connection live for them, but now I can't even get the wi-fi to connect.
I have an old Airport Express (A1088).I am running OSX 10.9.4 - I have downloaded Airport Utility 5.6 and yet cannot install - I am getting "This version of Mac OS XÂ on this volume is not supported".Unfortunately no PC or old Mac available. I used to be able set up on IOS but cannot do that anymore either.Any clues how to re-setup this old airport that works ok.
Info: MacBook Air (13-inch Mid 2012), OS X Mavericks (10.9.4)
After configuring wireless security on my Airport Extreme base station, the Airport Express I use to stream iTunes music to my whole-house stereo system has disappeared. Airport Utility can't see it. Yes, I checked connections. All I get is a blinking yellow light on the Express. The base station works as its supposed to.
I have a 17" Powerbook G4 with a 1.33 GHz Power PC processor. I'm running MacOS 10.5.8
AirPort Express doesn't show up in AirPort Utility 6.0. I haven't updated the AirPort utility on my laptop, and can find it there. 6.0 doesn't even has a scan button... I've done a hard reset of the AirPort Express, still isn't showing up.
We have two Mac Laptops, 1 is the little white Macbook, the other MBP. We have DSL coming in and then thru a 2wire modem then thru the Airport. The 2 wire modem is connected to a PC. All of this sits about 40 feet from the bar where we use the laptops and is a straight shot.
My problem is that the the newer MBP is stuck in the mud when it comes to connecting, and then holding any type of signal strength with the wireless signal.The older little white MB works great, every bar on the wireless icon is black, on the other (as I type this they are both on and side by side..) only has one.
When pressing Alt/Option and clicking on the wireless icon the good computer shows a transmit rate of somewhere between 20 and 26 when I have checked it several times this morning, the bad one has never been above one.It seems for the price I paid for the Airport Ex. BOTH of these units should be getting full strength signals.Ever had this problem? No of any possible solutions?The fact that the slow one is my wife's machine doesn't make life any easierI figure before I make an Apple reservation I could do a little research myself.
I bought the new airport extreme to extend the wifi range in my household and hoped to share a hdd. Upon my experience and reading the forums, the sharing hdd is not as easy as I thought. But that is not my issue at the moment.
My issue is with extending the network. A couple weeks of ago, I did the setup to connect the two airport extremes together (older round AE & new box AE) using aiport utility. It seemed to have work because the signal was stronger in a part of the house that usually had 0 to 1 bar.
But shortly after, the signal showed itself as inconsistent. The signal strenght is jumpy from 0 to full bars. And right now, I am sitting in a part of the house that used to have 0 bars and now, I get full bars. And yet my mbp cannot see the newer, closer in distance AE.
Yesterday my macbook's wifi started getting really slow to the point where it takes 10 minutes to load a webpage. I reseted my router and everything but it was still slow. Then I noticed that my iMac and Ipod touch had full internet speed and everything. What happened? I didn't do anything different from my normal routine at all.
I was running on old firmware for my macbook and decided to attach an ethernet cable to get the latest and greatest but it didn't fix the problem.
Last night my MacBook stopped finding any network to connect to. Usually there are about 10 networks that it picks up but now none show up not even my own network. My iPhone connects to my network fine as does my xbox and my PS3. Is there anything I can try to get airport to detect the networks around me?
I have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
I have been using a time capsule for about 2 years. I use it as an external wireless hard disk as well as a router for extending my wi-fi network (connection via ethernet). Â
For the last couple of days, Airport Utility has been showing two time capsules connected to it. One is "HVS Airport Time Capsule" and the other is "Yogender's Time Capsule". The second one does not belong to me. I have no clue who's time capsule this is. A screenshot is also attached here (one on the right does not belong to me).Â
Does it mean someone is hacking into my wi-fi and using that via their time capsule? I've changed the wi-fi password (for my time capsule's network and the original network) several times, but it still shows up.
This unknown time capsule also shows up in the finder under "Shared". Â
I upgraded to 10.9.4. Now, I can no longer log in to "network accounts". I am lucky in that my school district gave me administrator access, so I am currently logging in that way. Big problem though- the permissions on EVERY SINGLE FILE AND FOLDER are set to read only, so any time I want to access anything, I have to change the permissions on the folder/document. I have tried doing this en masse to no avail. How to log in to my original account so I can function the way I did before 10.9.4 hit.
I have a slow network issue. I'll try to make it as simple as possible.
1 MacBook Pro 1 Airport Extreme 1 Airport Express to Extend the Network
The network to my living room was slow, so I added the Express to extend the network. When connected through the Express, with a Time Machine backup, I'm getting about 500K/sec transfer speeds. When I move the laptop away from the Express and close to the Extreme, the network works much faster, about 5MB/sec. I don't understand why the network is so much slower when using the Airport Express as a network extender. Is the speed difference normally that much? If it's not supposed to be, is there anything I can do?
After installing the new update I no longer have sound either through the the speakers or the headphone jack. I know it works because I was using it right before the update. The speaker also sounds after the post bios.
Info:MacBook (13-inch Early 2008), Mac OS X (10.7.3)
I have a JVC Everio HD camcorder and am having some trouble importing the video. This morning, the camcorder was recognized by Finder and I could enter and view the files. However, the files are in .MOD/MP4 format so they would not import directly into iMovie.
This afternoon, I found a tutorial on how to convert the files so plugged my camcorder in again, only to find that Finder is no longer acknowledging it. It is recognized in iPhoto and Disk Utility.
It all stopped working immediately after the update. The PC is set to map a drive to the share it authenticates as <mac name>/<user name>; yet the password, which worked perfectly pre update, is now rejected.
