Intel Mac :: Need To Choose WiFi Network And Wait While It Connects After Startup?
Mar 4, 2012Every time I switch on I have to choose my WiFi network and wait for it to connect.
Info:
iMac (21.5-inch Mid 2011)
Every time I switch on I have to choose my WiFi network and wait for it to connect.
Info:
iMac (21.5-inch Mid 2011)
Until now I have been connecting to a wifi network that I use at home. It is fairly slow so for large system updates I connect to a wifi dongle. When this wasn't working last week for the new system update, I came onto the forum and was advised to change the DNS settings for the wifi dongle. It all worked. Since the system update however, my existing network will not connect to the internet at all. It appears in the wifi list but won't connect to the internet. Also, when I started to look for a solution I realize that I do not have Airport as a choice in the wifi list in preferences.
Info:
iMac, Mac OS X (10.7.2)
Why do I have to manually choose my network every time I open my computer. This did not happened before.
Info:
iMac, Mac OS X (10.7.4)
I have a late 2011 Macbook pro with the most updated OS X Lion. My problem is whenever I turn off the computer and turn it on I get the spinning wait cursor. It takes about 7 minutes or so before the cursor will go away and I can use the computer again. From then on it will work well until I need to access something in finder, whether its clicking on the finder icon or opening a folder - then it will appear again for 30 seconds or so (occasionally the spinning cursor won't go away so i am forced to turn off the notebook). It's not every time I access finder but its pretty close to 50/50. I backed everything up an external drive and reinstalled the operating system however the problem was not fixed and I still get the spinning wait cursor when I start up the notebook and about 50% of the time when I access finder.
Info:
MacBook Pro
My laptop connects to my imac's wi-fi network even though I have the wi-fi status as "off" in system preferences>network. If I have it off, how can my laptop connect and use the network?
Info:
Mac OS X (10.7.3), late 2007 model
New-out-of-the-box computer. I've tried creating new network connections -- and other configuration - but no internet pages open. The screen message says "You are not connected to the Internet."Â
Info:
MacBook Pro (Retina, 13-inch, Mid 2014), OS X Yosemite (10.10.1)
New to a Mac and I just received my new MBP Retina two days ago. I am having a strange issue where right after i turn on the computer it will connect and drop my wifi connection over and over again. If i turn wifi off and back on again it fixes the issue.Â
I have the latest updates for the MBP so not sure if this is a hardware issue or a software bug. My router is also brand new from Linksys and is working flawlessly once i do the above steps.Â
Info:
MacBook Pro (Retina, Mid 2012)
Whenever trying to connect to a WPA2 Enterprise WiFi network, I only get an IP address when it is the first time. (Authentication in itself works fine, it is getting an IP address that is the problem.) What I mean is the following:Â
1. I start up the computer
2. I connect to the network just fine
3. Suppose now I turn Airport off
4. Then I turn Airport on again
5. Now it doesn't work anymore! I still get authenticated (PEAP) fine, but I now get a "self-assigned IP address" and can no longer connect to the Internet.
6. When I restart, the same happens, i.e., "go back to step 1"Â
It seems as if the computer keeps a wrong cache of something, which is only cleared after restart?Â
It is not a big deal, would have been worse if I couldn't connect at all, but still quite annoying that I have to restart every time.
Info:
MacBook Pro, Mac OS X (10.6.8)
I have no trouble using WiFi at home. But when I connect my new MacBook Pro to WiFi networks at cafes, airports, and hotels, I can connect and a page or two will load without a problem. But a minute or two later, the WiFi signal appears to be fine but no pages will load and e-mail messages can't be sent or received. Â
If I turn WiFi off and reconnect to the same network, I can load another page or two and then it quits working. I don't have this problem when connecting to the same networks on my iPhone, so I'm assuming there's a problem with my computer or its settings. Â
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.3), iPhone 4
This problem never happens with my MBP - and it is running a CCC Clone of the same 10.7.x system. But whenever I restart my iMac 20.5" it never automatically connects at startup. I always have to touch the wifi symbol in the menu. After that I don't need to select my home network - it will then find it and connect. But until I do that it doesn't connect. This has happened ever since I've gotten this iMac. Also annoying is that the sound output upon startup always defaults to my Logitech headset regardless of how I left it set in Sound settings.Â
Info:
iMac (21.5-inch Late 2009), Mac OS X (10.7.3), 12 GB RAM, also MBP late 2006 +....
My son called and said his wi-fi stopped working. His internet connection is good and he can connect directly to the router and get a connection, however, he needs the wi-fi. He has powered down the IMAC,router, modem with no luck. Under network preferences it says not connected, with yellow light. No network IP address for the router as I assume it cannot find it. He is running OS X 10.6
Info:
iMac, Mac OS X (10.6)
Software Update ran yesterday and I installed the AirPort Utility update (version 5.5.2), and now my MBP no longer connects to my home network when the SSID broadcast is disabled. When I enable the broadcast the network shows up in the list of available networks and I can connect to it, then I can disable it again and the MBP stays connected. But if it's disabled to begin with it won't connect.
I never had this problem before the update, and no other devices on the network are having any issues. Has anyone else had this problem yet, or know of a fix?
Late 2008 unibody Macbook Pro running 10.6.5, all software is up-to-date except for the latest update to iTunes.
When I arrive at my office and turn on my MB Air, it does not always connect to my wireless network, it sometimes connects to an un-secured wireless network locaterd somewhere else in the building. Is there a way to force Lion to always connect to a specfic network and ignore others?
View 3 Replies View RelatedPeriodically the wireless network has to be manually reselected in airport even after several attempts to save the preferences. It appears as the preffered network but simply won't stay connected. It is an existing network that has worked just fine with an older PC, and a macbook. The only issue is with keeping the iMac online. Is there a way to correct this so that the "network not selected" nonesense ceases and it remains connected?
Info:
iMac (21.5-inch Mid 2011)
So I have a Solid State Drive with a OSX Partition and a Windows 7 Partition and a 320 gb hard drive formatted into journaled. I went into the "System Preferences" and "Startup Disk" and the only thing I see is "network startup". What does this mean?It takes ages to boot into OSX unless I start the computer and manually pick a partition and I'm assuming it's because I don't have a startup disk selected yet. I tried switching the position of the hard drive (SSD in hard drive bay and HDD in optical base and vice versa)
View 5 Replies View RelatedBeen a rough two weeks. I had the issue of my iMac not loading passed the grey screen. No keystrokes were working so I had to bring it in to get repaired. I was told some optic something cable had to be replaced.
Well, initially that didn't work but it just ended up taking forever too boot. 20 or 30 minutes. Now it is loading fine and Windows is also loading fine with bootcamp.
However, I can't get in to turn on my USB wireless adaptor for Sprint. I can open the system preferences and I can also go in to any other option without problems, but if I click "Network" it says Loading Network, then hangs up. I need to force quit and retry. Same results. Anyone know how to repair that? I have tried Disk Utility and it says no problems. Diskwarrior doesn't let me do much since I am booted to that drive.
I have an iMac OS X 10.7.3 (purchased in late 2010) with all updates current. I use AirPort to connect to my Linksys router with a WPA2 password.
Nearly everytime I wake my computer from sleep, my wireless router is disconnected, even when I have set my settings and clicked on the lock to prevent further changes. My router always shows on the list of available connections with full strength, but it is more often than not extremely difficult to get it connected again. It says "Could not join "myRouter". A connection time out occured."Â I usually have to use the assistant and go through the steps, which usually includes re-typing my password four to five times before it agrees that I know my own password (which is fairly simple to type, I can't possibly be entering it incorrectly that many times).
I downloaded and installed an update [URL] that quote: "resolves an issue that may cause an iMac to not automatically connect to a known Wi-Fi network after waking from sleep. It is recommended for all iMac (Late 2009 or newer) users running 10.7.3." Â
I tried setting a new location, and set the DHCP setting under TCP/IP to be manual. I was successful in connecting to the internet that time, and locked the settings to prevent further changes, yet the first time my computer woke from a sleep, the lock was unchecked and the settings were changed back to automatic. And I was disconnected yet again.Â
This has been going on for months, but in the last couple weeks I have found I am now unable to lock the lock to prevent changes, no matter if my Location is set to automatic or one that I have created. Really looking for resolution as this is wasting so much time, I am on and off the computer multiple times a day.Â
Info:
iMac, Mac OS X (10.4.11)
I recently switched cable providers to Time Warner. They set up a Ubee cable modem and all devices (IPhone, IPad, AppleTV, etc) are all connecting to the wireless network except my IMac.  I tried renewing my DHCP lease, updating to OS X Maverick but every time I try and connect I get an error message that says "Connection Time Out".Â
Info:
iMac, OS X Mavericks (10.9.4)
I have an unsecured wifi network at home and need to easily share photos between computers. I have an iMac and a couple window based computer.Is ther an easy way instead of using a thumb drive?
Info:
iMac (27-inch Mid 2010), Mac OS X (10.7.3)
MacBook. 2Ghz Intel Core Duo. OS Snow Leopard 10.6.6. I'm running a 2006 MacBook with Snow Leopard. A few months back it started dropping wifi connection. Airport would show no connection but would list my network along with others in my building. If I tried to connect with my WPA password it would just time out. At this time I was running Leopard.
Since then I've done a few things.Tried running the Netgear router with no encryption at all (same thing happens). Will lose connection and then time out trying to connect
I've tried the MacBook in a coffee shop with wifi access and at my parents (same NetGear router) and at my new apartment with a horrible Orange Livebox.
Taken the MacBook in to see the genius bar at Glasgow Apple store. Worked fine for them, but I explained it was intermittent but we could not force it to fail. I'm sure if it ran for an hour it would.
At present if I have the MacBook in the living room (where the Livebox router is situated) its fine and wont drop connection. If I walk some 5m to my bedroom it will work for approximately half and hour and then lose it. A few days ago I bought the Snow Leopard upgrade and installed it last night. MacBook runs a hell of a lot faster (yay!) but moving it away from the router and its dead as disco in half an hour.
So to clarify, the MacBook has been tested on 4 wifi networks/ locus with same issue. iPhone, Xbox 360 and PS3 all have no issues with dropping connection no matter where they are in the apartment.
Apartment is a new build and its walls are not made out of lead or kryptonite. Is this a hardware issue rather than software? When updating to Snow Leopard it was an update to the existing OS of Leopard not a clean install.
AIRPORT says the following in System Profiler.
Software Versions:
Menu Extra:6.2.1 (621.1)
configd plug-in:6.2.3 (623.2)
System Profiler:6.0 (600.9)
Network Preference:6.2.1 (621.1)
AirPort Utility:5.5.2 (552.11)
I bought a new iMac. I have a 2009 model.I want to copy files not use migration assistant. Wireless is slow. I don't have a FireWire cable. Â I connected an Ethernet cable. Â I can only connect to my old computer as guest. I have to manually add the folders to file sharing and it works but it's a hackÂ
I want to login with my old computer credential.  Both computers have accounts with the sae name. If tht is what is breaking it. I dunno Â
Info:
iMac, Mac OS X (10.7.3)
I have a 27 inch, mid 2011 imac. I bought it in March. It has started losing its wireless connection. The other issue is when it does connect it is very slow. I have a netgear modem, I dont think this is the issue cause the IPAD, and wireless laptop connect fine. I've also run a speed test, all wireless devices connect to 10Mbps and LAN devices connect up to 30 Mbps including the iMac when it is wired. Could this be an issue with the airport card? How would I know, how do I check? What should I do?Â
Info:
iMac, Mac OS X (10.7.4)
After disconnecting and cleaning iMac and accessories (external clean!), I am not able to use keyboard and/or mouse at the user page on bootup. Red laser light is visible on mouse, but nothing from keyboard.Â
The first time I booted up, staccato sound from computer (as if key was kept pressed down) but now nothing.Â
I have recently installed a new hard drive, but had 2 weeks perfect usage of my iMac before this incident.Â
how to choose an external blu ray burner for Final Cut 7.Â
Info:
iMac, Mac OS X (10.7.3)
I have a high speed wi-fi connection in my home. My MacBookAir looks like its always looking to connect to Network vs. just staying logged into the preferred Network. I see this is a slow process that affects the speed of my surfing the web. Â
What I'm I doing wrong in my settings? is it something to do with Configuration of IPv4 in TCP/IP; my is at "using DHCP". Should I have something in 802.1X Profile Information? Proxies; I have my set to "Auto Proxy Discovery" Â
Why cant I surf seamlessly? Why dos it look like my Wi-Fi is always trying to connect to my home Network?Â
Is there an adapter that connects a mini DVI to a mini Display port so I can use one computer as an external monitor?
Info:
iMac (20-inch Mid 2007), Mac OS X (10.6.8)
I have a late 2008 Aluminium Unibody MacBook (5,1) and installed 10.7.3 via software update without problems. But when I turned the machine on next morning, Wi-Fi was disabled and could not be activated via the menu bar control or network pref pane. After a couple of reboots--two, if I remember correctly--the MacBook booted up with Wi-Fi active and connected (I use a Fritz!Box 7390 WLAN router with both 2,4 and 5 GHz networks, connecting via 5 GHz by default).Â
I did then repair disk permissions and re-applied the Combo update. No cure, obviously. Same again this morning - no Wi-Fi on startup first, connection just after a couple of reboots. Wi-Fi hardware (Broadcom BCM43xx 1.0 , firmware 5.100.98.75.19) always shows up in the system profile, it's just that it's disabled first.Â
wifi no longer connecting after startup... so I have to connect manually... started after 10.7.3Â
Info:
Macbook Pro, 2 Mini's, Mac OS X (10.7.1), iMac
my mother's MacBook Pro doesn't automatically connect to our home's wireless network. It's encrypted with WPA2. My MBP and my sister's MacBook stay connected fine. My mother's, however, requires her to click on the AirPort icon at the top and select our network each time she wakes it or boots it up. This only started happening when I put WPA2 on the network. How do I fix this?
View 2 Replies View RelatedAre there any PC Cards (I think that's what they were called) that allow you to get online when out of wifi range, when traveling etc.? Or I think I'd heard about a way you can connect your macbook to your iphone, and piggyback the connection that way, I think called a Leash perhaps? I'm travelling to my in-laws, who don't have wifi and we're trying to figure out how to get online there with our macbooks.
View 4 Replies View Related