I am trying to burn a Dual Layer DVD with my new MacBook Pro 15"
i have been using Toast Titanium 10.
( Brand : Memorex DVD +R DL 8x )
It keeps telling me Error after 5 minutes of burning!
What is wrong ?
Here is 2 screen grabs of the Error....... :
I followed the directions on this website:[IRL] It didn't play in my DVD player because they say to burn it as a data disc. I dont know that if I used the Video TS option that subtitles will still work.
View 1 Replies View RelatedI bought Roxio Toast Titanium 5.0 and downloaded the 5.2.1 update so I could burn some DVDs on my iMac (which is about 2 months old). I set it to record a video_ts file from one of the DVD discs that I've ripped to the hard drive. It records the files and verifies, then it says that the DVD was burned fine. The problem is that when I try it on any DVD player, the disc will not play. It won't play in a stand-alone DVD player, on the iMac nor on my PC. I checked what was burned, and all the files were recorded fine. I've gone through 6 discs with the same result. The only time it recorded anything viewable, was when I set it for "disc copy" and even then, the entire DVD was not recorded because of some error and when I popped it in the player, the portion that was recorded was very pixelated and unwatchable.
I have a .mov file from iMovie that I would like to burn on to a DVD. I am using the latest version of Toast Titanium 8 (which I bought as an update from Toast 6 in the hope that it would fix the problem) but I keep coming up with Error messages.
View 7 Replies View RelatedI have access to many microsoft software packages from my school and some classes require me to have certain software and some is PC only. So obviously i need windows on my mac. So they have Windows 7 Professional.
View 1 Replies View Relatedim having a having a macbook from february 2008 (the white one 2,4 ghz blablabla.. doesn't really matter
because of malfunction of my dvd drive.. i had it replaced (waranty) 9 months ago.
now i thing it's broken again when i try to burn a dual layer verbatim disc..i get this error:
tried it with toast and disk utility.. same result.
dvd's and cd's play fine. just burned an 80 min cd as well :S
dvd drive:
MATSHITA DVD-R UJ-857E:
Firmware Revision:ZF1E
Interconnect:ATAPI
Burn Support:Yes (Apple Shipping Drive)
Cache:2048 KB
Reads DVD:Yes
CD-Write:-R, -RW
DVD-Write:-R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:CD-TAO, CD-SAO, DVD-DAO
Media:
Type:DVD+R DL
ID:MKM 003
Blank:Yes
Erasable:No
Overwritable:Yes
Appendable:Yes
Write Speeds:2.4x, 4x
maybe the lense is dirty but i rarely use the dvd drive.. will clean it tomorrow..but i don't think it will resolve my problem
anyone has a clue?
Thats basically the problem in a nut shell. I can't seem to burn a DVD+R DL, everytime I attempt to do this the system crashes completely and I get the transparent window telling me to restart the system. To me, this feels a lot like the blue screen of death.
Anyone else having a similar problem? Have there been similar problems reported? Its definitely not the discs either, I've tried using Philips and Memorex DVD+R DLs and neither work, however, burning this stuff on Tiger was fine, however I'm not sure if Leopard is to blame because i dont remember if I had burned any DVD+R DLs successfully using Leopard.
I've got a first gen. Mac Pro with a PIONEER DVD-RW DVR-111D.
I have a 1st generation Macbook, and I wanted to know if I can burn dual layer DVDs? Here's the output from System Profiler
Quote:
MATSHITA DVD-R UJ-857:
Firmware Revision: HBEA
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: No
It says nothing about dual layer support.
I'm trying to burn some data using DVD+R DL using my 17in MBP w/New Toast Titanium.. Unfortunately, its giving me an error and can not burn it. Anyone experienced this issue? Any solution to this problem??
I have the following hardware: MATSHITA DVD-R UJ-846
I have been using Titanium to burn DVD's. It usually takes about the length of the actually DVD to finish the burning process. Is this normal length or is there a faster program for burning DVD
View 2 Replies View Relatedhow to back up to a CD, from where to back up and how to reload the back up to the hard drive. I'm particularly concerned because it seems that I lost several months of Quicken data from my hard drive.
View 2 Replies View RelatedSo I've got an .iso with AUDIO_TS and VIDEO_TS folders in it. How can I burn the .iso to the DVD so that it will play back on my DVD player?
View 3 Replies View Relatedwhen I go the DVD-Video section I put all the videos I wanted in and the chapters/Menu I wanted etc.
Then it said that I had a mixture of both PAL and NTSC (or however you spell it) which I already knew and was fine with because I wanted to test out what my PS3 could read and could not between files of .mkv, .avi, and .mp4 (ironically it play/read everything but the .mp4).
why Toast Titanium increase file size? I'm trying to put a few episodes of an anime onto a regular DVD disc. Now the file is 563.1MB, but when I put it in Toast in the DVD-Video section, it tells me that 1.99GB on 1 disc.
View 4 Replies View RelatedHaving problems importing audio files from itunes to toast. When imported the file becomes distorted and impossible to listen to . Sound file is fine in itunes but something is happening in the transition.
View 1 Replies View RelatedThe information of disk burning is as follows,
HL-DT-ST DVDRW GWA4080MA:
Firmware Revision: AE39
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
I wanted to burn a more than two hour long .avi file to a DVD using Toast Titanium 10. However, when I import the file in Toast, it says it's only 58 minutes!
View 3 Replies View RelatedI copied a cd on toast titanium 7 then dropped in a blank to make a copy. To my horror a grey-ish "curtain" descended across the monitor, dimming the screen. After a few seconds a dialog box in several languages came up "You need to restart your computer. Hold down the power button or press restart." I pressed the power button which shut it down. Started it in about 10 minutes and things SEEM fine.
View 3 Replies View RelatedI'm backing up loads of files to DVD, I dragged all the files into Toast and started burning, letting Toast organise the files across multiple DVD. On DVD 11 of 18, there were some drive errors, and Toast crashed.
View 2 Replies View RelatedToast 10 takes a while to open ... it gets to open after a bit ... I then can add files for it to burn on a dual layer DVD .... but when I press the Burn button ... the program ends up sending me continuous messages of it can not burn and repeats this message in a never ending cycle.
View 14 Replies View RelatedI just purchased Toast 10 Titanium Pro with the hopes of being able to burn blu-ray DVDs using my MBP which I purchased last December (2008) with a CD/DVD burner: MATSHITA DVD-R UJ-868.
Do I need to purchase a special blu-ray drive (internal or external) to do this? I was told by my Apple rep that my dvd burner was fine and that I needed to use Final Cut Pro. I read that Toast 10 Titanium Pro was also compatible to make blu-ray DVDs.
I'm trying to burn a DVD that has both video and data. As in, when it's inserted into a regular DVD player it will play like a video DVD, but there's also data files if inserted into a computer. The video file is in a .iso format and the data files are .pdf's.
View 1 Replies View RelatedI had Toast 6, and it worked fine on my Pioneer DVR-112 for the last couple of years.
I just upgraded to Toast 9 Titanium, and it's now rejecting almost all the blank DVD-Rs that I try to record to.
"insert blank media."
But I know the spindle of Verbatim DVD-Rs ARE blank, and good quality.
Going back to Toast 6 works fine. It's just Toast 9 that complains.
This is a pretty basic question. iDVD
I have dual layer DVDs and want to burn the same small movie on both layers, one would be full screen, the other wide screen so the viewer can choose.
Is this possible? Is it just a matter of burning one movie at a time; will the comp recognize which layer is empty after the first burn?
How Toast Titanium lets me put a 4.37GB DVD-R in my powerbook G4, then lets me drag like 20 AVI files into the Toast screen, then when I press record it starts encoding and takes forever to encode each one, and then when it's all finished after about 12 hours of encoding... THEN is when it chooses to tell me:
"Not enough space on the DVD-R"and aborts the whole burning process.What in the HELL. Is there any way to have Toast tell you how many AVIs you can put on one DVD-R BEFORE encoding them?
when i put my cd or dvd in the cd/dvd drive it reads the files fine but when i open toast it doesn't seem to show them.
View 5 Replies View RelatedDoes anyone know of any compadible Dual Layer DVD that work with a PPC G5 Dual 1.87ghz?I tried memorex DVD+R DL and it kept on spiting out the disk
View 1 Replies View RelatedI am running Toast Titanium v. 8.1 (112). When I burn a DVD from standard files, such as an AVI, it encodes the file and then burns it to disk. The last time I was doing this, I checked the disk space on my HDD before and after burning; the difference was more than 3 GBs. Where does Toast store the files the result from the encoding? Having burned a couple dozen DVDs, I have reason to suspect that there are tens of gigabytes on my hard drive taken up by these encoded files which I will no longer use.
View 1 Replies View RelatedI just got a copy of Toast Titanium 10 and want to back up my dvds. The first one i tried said that the disc is copy protected. How can i get around this or can I? I just want to have the files so i can watch them on my computer and store them on my hard drive so i can watch them whenever wherever without the disc.
I have trashed toast preferences, repaired disk permissions anf have latest QuickTime, still it crashes
Info:
iMac, Mac OS X (10.6.8), 2.4 GHz intel core 2 duo
