how to make my idvd burn dual layerd movies? I've done everything the same as I always have and it still won't do it. Do I need to buy something other than Sony discs? I'm at my whits end.
I have been trying to burn a .cdr file to a dual layer dvd using Disk Utility. I got it to work once, but I tried four times. I think that it must be very sensitive or something, because I can't figure out any other factor that affects it.
Has anybody else run into this problem, and if so, what's your solution? I think it may have to do with vibrations of the disk drive or something, but I would be lying if I said I knew that for sure...
Anyways I have to burn a large disk image (Snow Leopard) legally of course. It's like 6.5gb so I bought memorex duel layer DVD+R 6.5gb the only one available at staples....
^That's my system profile of disk burning
Everytime I try to burn the disk image of 10.6 leapord it rejects the disk and ejects it.
I'm trying to burn some data using DVD+R DL using my 17in MBP w/New Toast Titanium.. Unfortunately, its giving me an error and can not burn it. Anyone experienced this issue? Any solution to this problem??
I have the following hardware: MATSHITA DVD-R UJ-846
Alright, I couldn't find exactly what I was looking for by searching so I figured I'd ask. I think it should be fairly simple.
I have a pair of DVD's that were made a few years back. They contain a couple hours of footage from an event. Too much to put on one single layer DVD so it got split over 2.
What I'd like to do is copy both intact DVDs. But I much prefer now at this time to do this on one dual layer DVD for simplicity. All I have is the two DVD's which have simple menus and the footage. Ideally, I would like to be able to keep everything, and maybe put one simple menu on top to select between part 1 and part 2.
So what are my options? I do have FCS1 and the latest iLife setup. Not much more. I just don't know the best way to set up and burn this project.
I have been searching the net for 2 straight hours now. I cant get my g5 to read dual layer dvd +r disks. Not write but read. My ibook g4 can just fine. My drive is a pioneer dvr-107d. I keep reading about updating the firmware but for the life of me i cant firmware anywhere.
Information: powermac g5 dual 1.8 Mac OS X (10.4.10)
Thats basically the problem in a nut shell. I can't seem to burn a DVD+R DL, everytime I attempt to do this the system crashes completely and I get the transparent window telling me to restart the system. To me, this feels a lot like the blue screen of death.
Anyone else having a similar problem? Have there been similar problems reported? Its definitely not the discs either, I've tried using Philips and Memorex DVD+R DLs and neither work, however, burning this stuff on Tiger was fine, however I'm not sure if Leopard is to blame because i dont remember if I had burned any DVD+R DLs successfully using Leopard.
I've got a first gen. Mac Pro with a PIONEER DVD-RW DVR-111D.
I have a 2003 model 1.8 GHz G5. The original SuperDrive still works fine but I have been looking into an internal Dual Layer DVD-R as they continue to come down in price. Are there specific specifications or brands/models I need to look for to ensure OSX compatibility or to support burning from iTunes and the Finder?
Information: Power Macintosh G5, iBook G4 Mac OS X (10.4.10)
I've got a handful of dual layer DVDs of which I'd like 1 copy of each.
To save time I wondered if I could plug my machine to my mate's machine via a network cable, with the original DVD in one mac, a blank in the other, and just hit 'Copy' in Toast?
AFAIK the write machine can only do 8 speed - would the data throughput via the network cable be fast enough for this?
I am trying to copy a DVDR recorded on a friend's DVD recorder. The disc is a single layer 4.7Gb TDK DVD+R and I'm using Toast Titanium. The problem is that my computer thinks the DVD+R is a dual layer disc. I say the computer rather than Toast because if I open the disc and copy the VIDEO_TS folder to the hard drive it takes up more than 10Gb, which is impressive since the disc it is copied from only has a 4Gb capacity! I have googled this but failed to find a solution.
copying DVD's. When I had a PC, I used to use DVD shrink to convert large Dual layer DVDs down to sizes that would fit on a single layer DVD. I downloaded mac the ripper and it works, but it does not downsize DVD's.
my mum has a mac mini core solo 1.5ghz. those cannot read the dual layer dvd discs so therefore i cannot upgrade the leopard to snow leopard directly. is there any other way i can do it? i checked to see if remote install was on the mac mini but it dosent come with it so anyone have any tips?
I need to rename "Original Layer" to Original Image" When this layer exists. In photoshop I've been trying this, but I get this error error "Can’t make «class cCLr» 1 of document "DE00ER515.psd" of application "Adobe Photoshop CS6" into type boolean." number -1700 from «class cCLr» 1 of document "DE00ER515.psd" to boolean tell application "Adobe Photoshop CS6"tell current document if (quick mask mode) then delete channel ¬ "Quick Mask"if layer "Original Layer" then ¬ set OriLayer to "Original Layer" set OriLayer to make layer with properties {name:"Original Image"} delete layer "Original Image" end tellend tell?
I have a Macbook Air and the new 13" macbook pro. I see that the Macbook Air is much brighter than the 13" macbook pro (under the same ambient lighting, both set to maximum brightness). I was told the reason for this difference is because of the lack of the glass layer on the Air. Is that really true ? If so, can you please let me know if I'd be able to get the same brightness I get on the Air on the Pro also by just removing the glass layer on my 13" macbook pro. TechRestore offers such a service for $134, which is simply a subset of their service for matte replacement (I don't want the matte replacement as I like the glossy screen). But since such a service would void my warranty and return policy, I want to be really sure before getting it done with them. I'd greatly appreciate any inputs/advice.
It is supposed to be the best burning package on mac. But I doubt it. I convert videos to dvd-video format using the absolutely brilliant windows7 application convertxtodvd. Please dont tell me to use a mac application instead of it. I tried it many times, there were always several problems(slow speed, subs etc). This is not the case here.
So, I want these dvd-videos in Video_ts format, to be burned in dvd disks using toast. It is supposed that video_ts folder are a standard folder, no matter the system you use. But toast has a different opinion. When I drag the folder in the dvd-video window, it asks to re-encode the video!!!If I try to burn this video_ts folder in windows machine using 'nero', no problem at all, straight burning! I really cannot understand why this happens.
Another problem I have is that the files I want toast to burn, usually reside to network computer. Is there any way to burn files from a network computer(win) using toast? Can toast access network or not? If not, I have to manually copy files to local disk, several minutes spent for copying gigabytes just to be able to burn them.