I got home today, turned on my computer while connected to an external monitor and all of a sudden, my MBP (13", late 2011) won't use the whole display. Instead the screen is squashed and i got two black gaps on either side of the monitor. The resolution is set to 1920*1080 as always, so that isn't the problem. Also, when I set the monitor to all other resolutions, it stretches all the way out, it's only on 1080 it doesn't work even though 1920*1080 should fill out the whole screen, while some of the other resolutions shouldn't. I have the displays set to extend, so the MBP's display is set to 1280*800 as usually, and everything functions perfectly on both displays except for the gaps.
I've tried closing the lid and playing around with the external monitor itself, but I get the same results. I've also reset the PRAM and SMC; same thing.I can also add that on the Windows part (Boot Camp installed) it just plain won't recognize the external display at all. Everything worked this morning...Â
I have a Unibody MacBook Pro from the Late 2009 line.
When connected to a TV, it used to be able to make the TV 1920x1080 but for some reason it won't do that anymore. It's not on mirrored, and I can't think of anything I've done to mess this feature up. Some people are saying that MacBooks can only support full res on externals by putting the computer to sleep, but I HAVE done full res before with both screens awake.
Any ideas on how to fix this would be much appreciated, it's driving me insane!
UPDATE : I think the port on my MacBook may be slightly damaged. A small wiggle of the cable makes the screen go black. I then have to fiddle with the Display Preferences or replug it. Should I call Apple or something?
I've just bought a MBP 15" and am wondering if I can connect a 24 inch monitor too make it a extended display. Can someone make a recommendation on what monitor (24 inch) display to buy? And Which connector to get so I get full resolution on the external display?
I have a Macbook Pro I bought new in June 2008 (Not Uni-body). It's a 15 inch with the standard options. I want to make a desktop setup on a budget and I'm wondering if my MBP will fill up this display at the complete resolution (1920 x 1080) and if it will function completely with the peripherals on the monitor. [URL]. Here is the display I'm looking at. Seems like a good deal, but I haven't done a lot of shopping around. I don't do graphic design and as I said, I'm on a budget, so the Apple displays are out of the question.
I'm getting a high resolution, and it looks alright, but it's not fully using the widescreen. That's "aspect" right? Well anyway, I also have a 19" display and it works perfectly. My Xbox, cable box and movies all use the full widescreen on the Acer, but the Macbook with the super amazing Mini DisplayPort doesn't even use the full resolution. What's with that? I thought the reason they had this new port and a $30 adapter was for higher resolutions!
The title says it all really... Quite a simple problem that I can't find any answer to!
I've hooked up my 30" Apple Cinema Display to the new iMac 27" and the highest resolution I'm getting as an option is 1280x800... The iMac correctly detects the ACD as a Cinema HD display but limits my resolution. Why oh why?!
I just purchased a Mac Mini and am using a DVI to HDMI cable to connect it to my 42" Sony KDF-E42A10. I am unable to achieve full-screen resolution and downloaded SwitchResX to manually adjust the display. Does anyone know the timing parameters for the Sony or how to achieve full-screen resoltuion?
My external display (HP w2207) seems to conflict with my MacBook Pro (15 inch Retina display, early 2013) since I upgraded MacBook OS to 10.9.4.The external display works at initial boot of Mac but does not work after OS sleeps and I attempt to awaken, and while the external display is not waking, the Retina display flashes through different screen views, which only partially reflect my normal screen, or do not reflect my normal screen at all.Â
For some reason VLC starts very slowly and lags when playing some H264 in mkv anime. So I turn to Mplayer. Is there a way to make it full screen. I tried every button but none seems to work.
I have a Samsung 2033SW hooked up to my mac and whenever I play video full-screen on on screen (either the laptop or the samsung), the other screen blacks out. This happens whether I use VLC, RealPlayer or Quicktime. How do I set it up so that I can play full-screen video on one and still be able to use the other screen for other stuff?
I'm pretty sure it's not because there aren't enough resources because I can still play "fit-to-screen" on one screen and still have access to the other screen.
The full screen mode of Preview always shows a small grey bubble on the botton of the screen that indicates the page number. I would like to remove this page numbering. Is that possible? Since the page numbers are not on the pdf itsself but created by Preview I could not find how to remove them. I added a screen shot to indicate which page numbering I mean.
Info:MacBook Pro (13-inch Early 2011), Mac OS X (10.7.4)
While using Google Sketchup and several other prgrams concurrently my macbook air cpu heats up substantiall. I like keeping the air "open" to allow for maximum heat disipation but of course this keeps the air screen on while I only want to use my external monitor. Is the only way to turn of the air screen turning down the brightness and using the "Mirror Display" option or is there another setting which alows my to utilize only the external display while the screen is open on the air?
As the title states. I am looking for an external display that matches the display on my black MacBook. I want one with the same gloss finish as my MacBook, this way I can calibrate both screens to look the same. That way when I switch screens it doesn't look different.
Anyone know of a screen that looks identical to the (previous generation) MacBook? I was thinking of getting a Samsung T240 but it has a different finish. How are ASUS screens? Any screens out there that have the same gloss finish?
i'm hoping someone can help me out on this little problemmy usual set up is a pair of speakers connected with jacks via an m-audio usb audio interface, with an external monitor connected via mini-dvi to dvi.now for some reason my audio interface has randomly broken (on a side note, could a power cut have somehow broken a usb peripheral connected to my macbook whilst it was asleep?) so i've hooked up my speakers to the line out to rca. Now for some reason, when i plug the mini dvi connector into my macbook i get an incredible amount of hum. not just a little, alot!
I have an 13" MBP that I ordered new in April, 2012. It is running Lion. I have an external monitor that is capable of 1440x900 resolution. I have an external keyboard and trackpad hooked up, and I like to close my MBP up and stick it in a BookArc. I want to be able to have the internal display disabled and to have the MBP only allow me to put windows on the external display, so long as the lid is closed. I also want to be sure that I am taking advantage of the resolutions available on my external monitor, which are higher than those supported by the internal display (specifically 1440x900).Â
This doesn't seem to work because I either have to allow the MBP to continue to draw my desktop across both screens (internal and external), OR use the "mirror displays" mode, which restricts my resolution of my external monitor. This means I either forgoe the additional resolution benefits of my external monitor, or I end up with windows that fall off-the-cliff, so to speak, because they are drawn in the portion of the desktop that would be shown on my internal display (which is closed).Â
I've read the community support pages on using the MBP with an external monitor, most relevantly, this page. It simply recommends using the "mirror displays" option. However, this option, as I mentioned above, doesn't allow me to make use of the additional resolution, and my external display looks bad. how to keep the 13" MBP in closed clamshell position, with the internal display disabled, and use my external monitor at resolutions higher than those allowed by the 13" MBP but which are available to my external monitor when not in "mirror displays" mode?
Info: MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3), External display (1440x900)
I just hooked up my macbook pro to an external monitor. Now, when I watch videos and what not, they will ONLY work in full screen. If I want to watch the video in a window, the sound will play but video does not. It may have something to do with Flash?
Decided to encrypt my external backup drive. Instead, I essentially doubled my memory by duplicating my external hard drive and adding it to my MacBook. Now my startup disk is full and I'm stuck. I also have Time Machine but not sure how to restore (replace?) my Mac storage to what it was two hours ago.
I am wondering that is it essential to connect power adaptor all the time while operating in closed calmshell mode? When I unpluged the cable it didn't work. Is there some way?
I own an Apple 27" Core i7 iMac. I just bought a Dell 3008WFP (30" LCD Display) [URL]. It has full size display port, hdmi, vga and dvi. As you know though it's a 30" so it needs "dual-link" DVI from whatever is driving pixels to it. So the iMac, to my knowledge only has Mini Display Port, right? How do I get the iMac to push the 30" at full resolution?
For the past few months i have been using an external display hooked up to my 12" powerbook g4. I have had it on a dual display mode so no mirroring. Recently i would open the laptop lid waking it from being in sleep mode and my internal display will not turn on. The apply system profiler does not even recognize that the internal display exists. My external display works fine and has always been set as the main display. If i go to detect displays nothign happens. I have tried restarting the computer, instering system disks, unplugging the external and nothing has worked. I simply cannot get my internal screen to fire back up. When i used to unplug my external display the internal display would switch back to being the main display and everything would be fine. Now i cannot get the internal display to function whatsoever. Please try and help me as a need this laptop working and i will be ordering a mac pro soon for use with my external display.
I have a Macbook Air, and i just picked up the new LED ACD from my local apple store. Since im new to mac, is there a way to either close my Air and not have it go to sleep? I want to use the external display as the primary display with my laptop closed, any ideas?
I have a strange problem in fullscreen mode, on my Macbook pro 15".I LOVE fullscreen, and infact the next macbook I will get is the 11" air because of its size and because full screen is so nice to work with.Suddenly the menubar will not display it self when I move the mouse to the top of the screen. The only way I can access the menu bar is by exiting full screen (ctrl + Cmd + F) and the toggel it back on after I have used the menubar .This actually makes fullscreen mode useless and its driving me nuts, because this should not happen on Apple software. I would expect these sorts of behaviour on windows but not in osx.
I have a question about using dual displays with my new macbook. The basic issue is this:
1: plug in second display and setup dual monitor support to use the external hi-res display and the macbook's display (no problem here).
2: drag windows to the external display and resize to use (no problems here either).
3. Power down and disconnect the external display.
4. Start up the macbook without the external display and try and open up a program that I was using previously on the external display. The problem is that it is resized and positioned for the external display and is now off the screen of my macbook display and I can't directly get to the title bar to move it or the resize corner to resize it.
I just purchased a 23" monitor to replace my iMacs 17" display (since it has a nasty crack in one of the corners). I hooked it up fine and all, but the displays are linked, allowing me to hover the mouse to the iMac's display which I find annoying most of the time.
Is there a way to make the iMac display zone out and just use the external by itself?
Teaching in Netherlands. When connected to wireless, signal bars are full but Macbook does not display any page just a blank page. Itunes and App store both work fine.Â
My windows notebook and Android phone both connect to wireless.No proxy options are ticked.Ran the Assistant Diagnostics: Selected Wireless, Network settings, ISP, Internet, Server went green/red then back to green with messafe saying Network Change detectedRestarted routerRemoved wifi network and reconnectedRan wireless diagnostics, nothing shows up Renewed DHCP LeaseChecked the Ipv4 and Router address - both begin 192.168.178.xThere are two DNS Server numbers - checked both and they are related to the ISP
Dont have ethernet cable to check wired connection
Info: MacBook Pro with Retina display, OS X Mavericks (10.9.4)
