I just got a 15inch MacBook Pro 2.4 i7 quad. The computer is very fast when I just turn it on. If the computer goes to sleep and I wake it up, everything becomes very slow. I believe this is an issue with Lion. Also all the software is up to date. have to turn the computer on and off everytime I want to use it.
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.3)
Does anyone else notice the MBA takes a long time to reconnect to your wifi network after awaking from sleep? I'd say it takes 10-15 seconds vs. a MBP which takes less than 5 seconds.Not a huge deal, but I'd say it's one of the slowest notebooks I've used to reconnect to a wifi network.
View 11 Replies View RelatedMy MBP (about 2 years old, Santa Rosa) is having some major issues both starting up and going into sleep. First off, I'm using 10.5.8, everything's updated, I don't have a bunch of stuff on the startup processes (quicksilver and iTunes helper) and I'm plugged into a power source. When I start my computer (since yesterday) it has been taking an abnormally long time at the grey screen before the Apple, the grey screen with the apple and the rotating wheel, and then it goes to a light blue screen for 5 or so minutes (repeat: minutes) until flashing light and dark blue and finally taking me to the login. Not only that, but my computer will not go to sleep when I close the lid. Instead, the screen turns off and the hard drive and fans keep chugging. What's more annoying is when I then try to open the lid to manually turn it to sleep, the screen won't turn on. This usually requires a hard reset, which then takes 10 minutes to start up.
View 9 Replies View RelatedI'm hoping I can get some ideas and guidance on this. A few months ago I bought my wife a 17" MBP. At the time we had a D-Link DIR655 Wireless-N router and the MBP worked great with it. If I woke the machine from sleep the reconnection to the wireless network was pretty much instantaneous.
Unfortunately that router started to flake out and I replaced it with what is considered to be a top of the line router, Netgear WNDR3700. This router has a dual N band. One band is N only the other one is B/G/N. I have attached the MBP to both networks.
When the MBP wakes up it takes up to a minute for the wireless to be re-established. Weirdly it will reconnect to the SECOND of the two networks that are listed in priority order on the advanced wireless settings.If I remove either of the two networks and only have one listed, sometimes the MBP will take over a minute to eventually get reconnected.Does anyone have any thought on this? It's very frustrating and I haven't figured out why the reconnection is so slow with this very high end router. All my other wireless devices maintain their connection to the router very well with no drops or reconnects.
why is my iMac slow after sleep ?
Info:
iMac, Mac OS X (10.7.3)
This is a phenomenon that I have experienced on a Blue & White G3 and a Gigabit G4, and in OS 9 and OS X: Whenever the hard disk spins down, the mac goes really slow even after it spins back up. I have to set the Energy Saver settings to keep the HD and computer from going to sleep (same result when computer goes to sleep). The problem is only fixed after I restart the machine. Same result with different hard drives as far as I can tell. Does anybody else have any experience with this or any additional explanation?
View 1 Replies View RelatedMy new i5 iMac has been really slow after I get out of its screensaver or take it out of sleep. Even if its on the screensaver for a minute, moving the mouse causes it to freeze and try to load the desktop. This takes about a minute before my computer is fully functional again. Also, I don't know if this is just me thinking this or if its actually a problem, but the computer seems a lot slower than my previous, a 24" 3.06Ghz iMac.
Another thing, the fans seem to spin a lot more with this computer. Watching a YouTube or Hulu video makes the fans spin a ton. I've never had that happen with a Mac before. The computer also gets literally too hot to touch. Anybody else have this?
Also, on a (kind of) unrelated note, Windows performance with this is horrible. I've tried Windows 7 and Vista, and both run... adequately. The fans also spin a ton in Vista (what I currently have installed due to there being no 27" drivers for 7 yet).
Background info:
A few weeks ago I upgraded from a regular macbook to a brand new macbook pro 2.66 ghz. I replaced the hard drive right away with a 500gb one (had it done by apple). So my machine runs snow leopard now, I used the data transfer mode to basicly copy the data and apps from my old macbook to the new MBP.
The "problem"
It all worked fine and smooth until a week ago ...For a week now I have a problem that really concerns me. Whenever I open my laptop from a sleep mode he gets really slow and unresponsive to my commands. Its like its crashing, all I can do to get out of this is a hard reboot.
However .. during a reboot OR a cold bootup the MBP gets stuck in the grey screen with only the apple logo .. after a minute or 3 it will start loading but it will never reach the login screen... The strange thing is that when I do reboot it over and over again .. it eventually will boot normally and when it does the MBP runs fine .. until I turn it off or put it in sleep mode .. then the nightmare will start again.
What I have done
I personally suspects the Hard Drive to be the culprit, I get the feeling that the Hard Drive is having trouble starting up or getting out of sleep mode. I am not sure tough.
I have done the following:
- Disc Utility (gives no errors)
- Booting up in terminal and run Disc Utility there (repaired a volume issue)
Could this be a leopard issue? I actually can't remember if this issue happened after the last macOS update or not ..I never had a problem with my iBook and Macbook so I have little experience on troubleshooting. So I hope you more technical experienced users can give me some tips on what to do here.
Just picked a second hand g5 up which runs like a dream! One thing I have noticed recently after putting the machine on sleep is that it takes forever to respond after been woken. The display and desktop come on instantly but when I click a program all I get is the beachball, the hdd doesn't appear to spin up. Then about 5 minutes later you hear the hdd spin up and away we go back to normal. It doesn't do this all the time though!
View 10 Replies View RelatedSometimes I have to try a few times to make it go to sleep. Is this a sign of Malware?
View 1 Replies View Related1. When closing the lid or pressing the power button the computer freezes, the fans start spinning fast it stays like that until it drains the battery. This happens every time.
2. Start-up times are very long, like 3 or 4 minutes. This also happens every time.
3. Now after a fresh snow leopard install it doesn't even start up completely, as it stays showing a light blue background and I can hear the music of the introductory animation.
4. Also, the keyboard is unresponsive at the login screen, but the mouse cursor moves and the display goes to sleep normally. Clicking anywhere with the mouse also produces no effect.
5. It seems to work OK in safe mode.
The macbook worked ok with the factory installed Tiger. The SL DVD is OK, as its installation has been tested on another Mac. The machine's advanced hardware test passed successfully. Resetting Pram and SMC did not solve the problem.
I leave my Air on pretty much all the time, and put it to sleep while moving around etc. Sleeping it disconnect the Airport connection - which if very annoying. At a desk I've just been dimming the display all the way off in order to keep my connection.
However, I recently noticed that by setting a "sleep display" hot corner, my network connection is maintained.
I have 2 questions:
1) Is sleep display equivalent (functionally) to simply dimming the display all the way down?
2) Is there a way to either set up a shortcut to sleep the display (other than a hot corner) and/or set it so that only the DISPLAY sleeps after 'x' minutes?
I set the MBP to sleep in 10 min through the Energy Saver pref with the option to sleep the hdds. When it's about to sleep the screen dims, then turns black, then the sleep light comes on but does not blink no matter how long I leave it. The blinking only happens when I close the lid or when I select the Sleep option under the Apple logo. Is that normal behavior?
View 11 Replies View Related I have a macbook pro 13" early 2011 and I'm se as shown in the pictures (since i upgraded to os x yosemite) . It happens after display sleep or computer sleep on login not on boot up .I've noticed that i run out of ram when the problem appears (only 15MB RAM available out of 4GB), though i doesn't happen every time . I've talked to service and told me its either motherboard replacement or because the ram isn't enough (gpu shares with main ram) so maybe i should try upgrading ram. URL....
Info:
MacBook Pro, Mac OS X (10.6.8)
I have torrents going all the time. If the computer goes to sleep, the internet disconnects, so they stop. Display sleep wouldn't disconnect though. Is it OK to have computer sleep on "never" but keep display on "15 minutes"? I don't usually even leave the computer on overnight.
View 3 Replies View RelatedI have a new MacBook (Dec '08) and everything is working fine with one exception. When I type numbers into the calculator app they appear on the screen in slow motion with a nice long pause as each number typed is displayed. On our iMac the calculator app just flies along and has no problem keeping up no matter how fast I enter in numbers. Any ideas where to start on this one? Besides the standard software we have installed Microsoft Office and Handbrake.
View 6 Replies View RelatedI have a Macbook Pro core 2 duo era 2007, OS 10.6.8, with an interesting problem I've not encountered in reading other issues. Here's the system profile, to get that out of the way: [code] Enabled Other than the faulty video card that seems standard for this run of the Pro, I have never had an issue. I have just replaced the battery from the original battery that came with the computer. It was useless to the extent of the word, but my budget did not allow me to purchase a new battery until recently. The battery info only stated "Replace Now" and the LED meter no longer functioned. The battery held no charge, and the computer only ran off of wall power. Up until a few days before I replaced the battery, this provided no trouble. However, it began one day to startup extremely slowly (5 minutes or more on the Apple logo startup screen, and then more time to load dock/top screen toolbar/etc. It also failed to recognize the external HD I frequently use with this computer. My theory was that it was simply underpowered on account of the failed battery, and the internal HD or the CPU was just not able to run properly. I finally put a new battery in hoping that it would fix the issue, but no avail. My startup time seems slightly less, but it seems as if the computer has not loaded interface protocols, as the computer is unresponsive to attempts to open the dock or a finder window, or even hover over battery or volume icons. After 5-10 minutes it finally kicks in and I can use my computer without problem, with the exception of the external HD, which will still not load.I have run disk utility, verified my HD, no errors reported. I have the activity monitor up which shows a pretty minimal load on the CPU and disk usage. Nothing I can think of would explain the problem my computer has suddenly adopted.
Info:
MacBook Pro (15-inch 2.4/2.2 GHz), Mac OS X (10.6.8)
I have this MBP 13'' Mac OS X 10.7.5 running a 2.4GHz i5, 4GB RAMs and 500GB storage.The problem started yesterday when I was typing on Word and I copy pasted something from the net (chrome browser) then it froze.I waited for around 5minutes and still frozen with the spinning wheel, then I decided to turn it off by pressing power for 10 seconds restarted my
MBP then now it running so slow on start-up and apps are very slow to open like around 5 minutes. Every action that I try to do like clicking on the apple in the upper left it freezes showing a spinning wheel and it will take time to show the drop down options. I checked disk utility and it said that HD is ok, done verify/permission verify and repair.
I checked the activity monitor noting the ram/CPU usage and its normal it even tells that 2GB of ram is not use.It shows not responding in the activity monitor if you open an app for around 5mins then it opens or it will crash.I already done the 2 kinds of reset and did not work.BUT it opens normally in Safe mode.
Info:
MacBook Pro, Mac OS X (10.7.5)
I'm finding my MBA rev b to be quite slow opening apps, I bought the 1.6 ghz 120gb model.
It seems like everything's rather slow to open. I have 30gb free on the hard drive, iTunes, Safari (5 tabs) TextWrangler and mail open all day.
If I ever need to go into Firefox it takes a fair while to get up and running. I ran some xbench scores and it seems very slow on the random reads, oddly it was much quicker writing to the disk than reading.
Is their anyone in the know who can confirm that this is normal? Or if not, is there anything I can do to give it a boost?
i tried mroogle and search but i couldn't find exactly what i was looking for and i know this community knows it all.
i am trying to prevent my new 2010 macbook pro from going to sleep when the lid in closed. i know there are programs that do this but they keep the display on as well. I wanted to know if there is a program that does it and has the option of turning off display. i am running snow leopard 10.6
Recently I've started connecting my 2.5GHz Intel Core 2 Duo (pre-unibody) Macbook Pro 17" to an external monitor (via DVI).
Since then my computer goes into Safe Sleep instead of Sleep (it's plugged into power).
This is an annoyance I'd rather avoid because even if all programs relaunch:I have to wait for them to launch (longer)Programs like Excel seem to have been quit in an unorthodox fashion: when it starts back up I get an error notice that it was shutdown inappropriately & the doc which reopens is a rescued version of the doc I had open before the safe sleep.
Info:
MacBook Pro (17-inch Early 2008), iOS 7.1.2
I edit using Lightroom and Photoshop and I'm having an issue while editing. After editing around 8-10 photos in Photoshop the computer starts running unbelievably slow. After each 8-10 photos I have to close down everything and reboot. Even the reboot process is super slow as I have to force quit each application usually 1-2 times to get it to close. Is this normal? I have a 2011 17" with 2.2 GHZ i7 with 8GB ram. Is there any setting that I can change or be aware of.
Info:
MacBookPro, Mac OS X (10.7.2)
only the sleep button under the apple logo puts the hard drive to sleep it doesn't do it automatically though energy saver and a timed sleep?
Info:
iMac (27-inch Late 2009), Mac OS X (10.7.4)
In tiger you could easily disable safe sleep and remove the sleep image file but in Leopard this seems to have changed. Yes you can disable safe sleep & remove sleep image files but only temporarily. As soon as you restart or change energy settings back to default, leopard automatically reverts the safe sleep settings to default and starts creating an image file again
Is there no way to permanently disable/remove these?
My iMac wake unexpectedly from sleep mode then goes back to sleep 00:10-00:15 later. Yosemite is current.
Info:
iMac, Mac OS X (10.6.8)
I am running Mac Mini as a home server (turns out to be not a great idea, btw), and even though I set the preference to never sleep or shut down, it does go to sleep when there is no activity for long time. Since I am using it as home server, it should stay awake all the time or at least wake up from sleep when there is incoming ping from other computer, but it just goes to sleep.
View 5 Replies View RelatedHey guys, i got an old Powerbook that the whole family use to surf the net. I notice its been super slow lately. Ive never had a problem with this notebook, I've only done 2 reinstall in the time ive owned it. I recentluy did another one, and notice its still slow, loading websites is slow, cant watch movies on it. This is a notebook i use to do photoshop and illustrator work on.
Do you think its just its time? I think it could be the hard drive or memory, is there any type of diagnostic i can do to find out what the problem is?
I am copying my DVD collection to the computer to be able to play on an iPod and a mac mini hooked up to the hdtv. Mainly TV shows.I have a Mac Pro with 2 DVD drives. The first one is the original drive (Pioneer DVR-111D) and the second is a Pioneer DVR-116D which I added. I intended to use this 2nd drive mainly for ripping DVDs because I knew I would have to update the firmware to get rid of riplock.
On the DVR-116D drive, I updated the firmware to remove riplock so it would not be limited to 5x read. I have not updated the firmware on the original DVR-111D drive. I am using fairmount to rip the DVD.Under OS X just ripping the DVD to the hard drive takes maybe 20-30 minutes. MacTheRipper is just as slow as is making a disk image using disk utility. I boot into Vista and use DVD Extractor and the same DVD takes 7 or 8 minutes .
Why is it so slow or is there a faster method of ripping a DVD on OS X?
recently my Mac is really slow, slow on startup(took around 1-2hours), and slow on task(more than 5 minutes delayed time on every single task), I don't know what happened to it,
My Mac specs:
1.Mid-2010 27 inch iMac,
2.Original 4g Ram upgraded to 12g
3.1TB HD has got more than 400gb free space.
4.i3 processor
5.Using latest Lion(I think it's 10.7.3)
Problems:
1.Startup tooooooooo slow, take more than 1 hour
2.Extreamly slow on tasks. Without any apps opened, every single click, it turned into the 'colorful fan', for instance, open finder, it took more than five mins, and it's not only the finder, it's EVERYTHING!!!!
What I have done so far:
1.I have reduced the login items
2.I have changed the password login to the automatic login
3.I have tried verify disk permission, verify disk, repair disk permission and repair disk
4.Unplug all unnecessary items(monitor, external drive etc.)
5.Run couple of time of 'clean my Mac', get rid of all the trash.
6.Cleaned the cache
Due to the ridiculous, frustrating startup, that's all I could do, however, none of them worked.
Now I am using recovery HD to reinstall Lion from a disc, but I don't know if it'll work or not.
I don't have another Mac, I don't have backups(don't want to lose my data),that's my situation.
Info:
iMac 27'', Mac OS X (10.7), iPhone 3GS,iPad 3G/Wifi 64G, Sony vaio CR
Sleep seems to have stopped working all of a sudden on my recently upgraded iMac. The only thing I remember doing was repairing disk permissions and changing a few iChat preferences.
The console shows the following;
kernel Sleep failure code 0x00000000 0x11000000
A reboot does not clear the condition
