OS X :: System Gets Slow After Sleep Mode / Unresponsive To My Commands?
Sep 8, 2009
Background info:
A few weeks ago I upgraded from a regular macbook to a brand new macbook pro 2.66 ghz. I replaced the hard drive right away with a 500gb one (had it done by apple). So my machine runs snow leopard now, I used the data transfer mode to basicly copy the data and apps from my old macbook to the new MBP.
The "problem"
It all worked fine and smooth until a week ago ...For a week now I have a problem that really concerns me. Whenever I open my laptop from a sleep mode he gets really slow and unresponsive to my commands. Its like its crashing, all I can do to get out of this is a hard reboot.
However .. during a reboot OR a cold bootup the MBP gets stuck in the grey screen with only the apple logo .. after a minute or 3 it will start loading but it will never reach the login screen... The strange thing is that when I do reboot it over and over again .. it eventually will boot normally and when it does the MBP runs fine .. until I turn it off or put it in sleep mode .. then the nightmare will start again.
What I have done
I personally suspects the Hard Drive to be the culprit, I get the feeling that the Hard Drive is having trouble starting up or getting out of sleep mode. I am not sure tough.
I have done the following:
- Disc Utility (gives no errors)
- Booting up in terminal and run Disc Utility there (repaired a volume issue)
Could this be a leopard issue? I actually can't remember if this issue happened after the last macOS update or not ..I never had a problem with my iBook and Macbook so I have little experience on troubleshooting. So I hope you more technical experienced users can give me some tips on what to do here.
View 4 Replies
ADVERTISEMENT
Dec 12, 2010
So, sometimes when I wake my SR 2007 15" MBP from sleep, the keyboard and trackpad are unresponsive and I have to reboot several times before they work. I googled the problem and looked around here and didn't find any solutions.
View 4 Replies
View Related
Dec 29, 2009
As of last night, my MBP started acting very strangely. After entering my username and password, it would enter the desktop for a short period of time and then kick back into sleep mode; the screen would turn back to black. Sometimes it will let me stay on the desktop for a long time and other times it will hardly let me stay on the desktop. I called apple support and they had me start the computer in safe mode; even then it occasionally kicks me out.
The tech guy said that it was a "strange software issue" and not a hardware issue. I thought it was a hard drive issue; my hard drive makes an odd sound when it unlocks (a grinding sound), but it has been doing that for quite some time with no issues. I tried to reset the SMC and it didn't do anything.
How should I remedy this problem? Is this a hard drive issue? Hard drive failure? Has the grinding sound finally caught up with me? I am running OS X; not leopard or snow leopard. I know I need to upgrade, but this shouldn't be happening.
View 3 Replies
View Related
Mar 29, 2012
I leave my imac on at night, from screensaver it goes to a black screen but I have selected that the hard drive never goes to sleep. In the morning when I click the mouse or a button on the keyboard it shows me a frozen screensaver screen and the imac is totally unresponsive. Have run disk utility and everything seems totally fine there. It is impossible to use the force quit option so have to resort to switching the whole thing off from the power button.
The software is all up to date and since disk utility shows everything in perfect working order I am puzzled what this is. A corrupt file or app? I am not a heavy user so no games installed - only software installed is the caffeine app, microsoft office for mac which is compatible with my imac, skype and that's all. Lots of free space on the hard drive too. I am not an expert on macs so I don't know how to look in case something in specific causes this that I can uninstall.
Info:
iMac, Mac OS X (10.7)
View 6 Replies
View Related
Aug 10, 2009
I am running Mac Mini as a home server (turns out to be not a great idea, btw), and even though I set the preference to never sleep or shut down, it does go to sleep when there is no activity for long time. Since I am using it as home server, it should stay awake all the time or at least wake up from sleep when there is incoming ping from other computer, but it just goes to sleep.
View 5 Replies
View Related
Aug 6, 2009
My MBP (about 2 years old, Santa Rosa) is having some major issues both starting up and going into sleep. First off, I'm using 10.5.8, everything's updated, I don't have a bunch of stuff on the startup processes (quicksilver and iTunes helper) and I'm plugged into a power source. When I start my computer (since yesterday) it has been taking an abnormally long time at the grey screen before the Apple, the grey screen with the apple and the rotating wheel, and then it goes to a light blue screen for 5 or so minutes (repeat: minutes) until flashing light and dark blue and finally taking me to the login. Not only that, but my computer will not go to sleep when I close the lid. Instead, the screen turns off and the hard drive and fans keep chugging. What's more annoying is when I then try to open the lid to manually turn it to sleep, the screen won't turn on. This usually requires a hard reset, which then takes 10 minutes to start up.
View 9 Replies
View Related
Oct 6, 2009
Just picked a second hand g5 up which runs like a dream! One thing I have noticed recently after putting the machine on sleep is that it takes forever to respond after been woken. The display and desktop come on instantly but when I click a program all I get is the beachball, the hdd doesn't appear to spin up. Then about 5 minutes later you hear the hdd spin up and away we go back to normal. It doesn't do this all the time though!
View 10 Replies
View Related
Jan 31, 2008
I have resolved my MacPro sleep issue by removing the Seagate 320GB stock drive. For whatever reason, if that drive is plugged in, it reboots my MacPro when waking from sleep. I had setup 2 WD 500GB drives in RAID 0 as my boot volume and this was configured with Windows XP Pro for other uses.
View 24 Replies
View Related
Mar 26, 2009
I'm downloading a long patch for World of Warcraft, and I want my iMac to stop burning up so much Heat! Can I 'half' turn it off or something - so that it keeps downloading but relaxes and cools down?
View 2 Replies
View Related
Dec 11, 2009
My MacBook does not sleep immediately, I have already tried removing safe sleep and it gives me no effect. It is not a hardware problem as my Windows Vista on the Machine sleeps just how I would like it. For info, the Hard Drive that is in it (320GB WD Scorpio Black) was used in an EFI Hackintosh install for my MSI Wind (but EFI installs do not modify the main operating system so I do not know what the heck is causing this)? By the way, the MacBook is custom, made by me. I built it out of three dead MacBooks.
One Black Core duo which was stepped on and had a broken screen and hinges which gave me:
Only working Logic board of the Pack (2.0GHZ Core Duo) I paid 140$ for this one
2 512MB sticks (Removed one and added a 1GB Stick, yes I know matched pairs, gonna find another 1GB soon)
Bottom case.
Top lid
Half the keys for the keyboard.
The Second MacBook Free:
2.0GHZ Core Duo white gave me with coffee spilled on it
Top case with trackpad, and half of the keys
Bezel
Hinges
Screen
other screws etc.
Fan (The one inside was going clack clack clack)
One 2.2GHZ Core 2 Duo which a dog peed on, Free for getting data off of:
DVD-R Drive one that was in it wouldn't eject
Sleep Light, the one that was there originally was borked and did not light, and IR did not work. Now it does
alternative screen with no pressure marks like the one I have now but one noticeable 1/2 inch scratch.
Various screws.
I am yet to finish it. I am still prototyping the new top screen assembly using the Black lid, a red apple, and the screen with a scratch on it, and the bezel from the 2.2GHZ which is really beat up. The current top assembly is straight from the 2.0GHZ White. Here's a pic of it in it's current state.
View 18 Replies
View Related
Apr 23, 2009
when i have my macbook on and close it (sleep mode) and re-open it at a later time. it typically makes four noises (basically sounds like it is reading the hard drive for 1-2 seconds when you open it. lately it is making those same noises but noticeably slower. what could be causing this? is my hard drive going to go out on me soon? i have about 10 GB free on it.
View 1 Replies
View Related
Dec 2, 2014
While trying restore the entire HD image to a different hdd in system recovery mode the laptop goes to sleep.
How to prevent it ? the system recovery does not seem to have any terminal app so cannot issue caffeinate command either :/
Info:
MacBook Pro, OS X Mavericks (10.9.5)
View 1 Replies
View Related
Aug 23, 2009
I'm having a problem with my PowerBook G4 where is goes into sleep mode at random times. Mostly when I am streaming video..or at times the fan comes on, it sounds super high then boom. sleep mode again. After hitting the space bar, it comes back on, but it'll happen again shortly after. I've played with the sleep settings
View 5 Replies
View Related
Sep 13, 2010
1) If my MacBook Pro is fully changed and I plan to put it to sleep mode, do I still need to let AC adapter plug in?2) Let the computer to sleep or turn off is better when I don't use it?3) What's the normal "Fully Changed Capacity"? Because I saw it changed from time to time when I check in "Apple system profiler"?
View 6 Replies
View Related
Jul 20, 2010
when working on my new Imac sometimes the machine put itself in sleep mode! The screen turns black and I have to enter my password. Sometimes it happens 2 times in 1 minute; other times once in 1 hour.
View 3 Replies
View Related
Aug 28, 2008
Mac Mini loaded with Leopard OSX. When I try to put it into sleep mode it just goes down and then restarts.
View 1 Replies
View Related
Jun 18, 2009
I can be in the middle of using an application, browsing a web-page, or basically any type of function when it will put itself into sleep mode. When this happens, I cannot get it to "wake up". I have to disconnect it from the power source, turn it over and remove the battery, wait a few seconds, then hit the power button, put the battery back in, then restart it. This is the only way I have found that will get it to come back to life. I don't like doing it, but I really don't see what other options I have.
View 1 Replies
View Related
Dec 19, 2009
My new i5 iMac has been really slow after I get out of its screensaver or take it out of sleep. Even if its on the screensaver for a minute, moving the mouse causes it to freeze and try to load the desktop. This takes about a minute before my computer is fully functional again. Also, I don't know if this is just me thinking this or if its actually a problem, but the computer seems a lot slower than my previous, a 24" 3.06Ghz iMac.
Another thing, the fans seem to spin a lot more with this computer. Watching a YouTube or Hulu video makes the fans spin a ton. I've never had that happen with a Mac before. The computer also gets literally too hot to touch. Anybody else have this?
Also, on a (kind of) unrelated note, Windows performance with this is horrible. I've tried Windows 7 and Vista, and both run... adequately. The fans also spin a ton in Vista (what I currently have installed due to there being no 27" drivers for 7 yet).
View 14 Replies
View Related
Mar 25, 2012
I have been having problems with my Macbook Pro recently not booting up and stuck on the Apple logo screen. Now my MBP DOES mount the HD, It DOES enter Single User Mode, It DOES enter Hardware diagnostics mode and has no problem. What my MBP DOESN'T do is; accept commands in Single User Mode like the "fsck -yf' or any real command NOR does it boot into Safe Mode. i have tried resetting the PRAM also i have tried booting from an external partition that i made.
[code]...
Info:MacBook Pro (17-inch Mid 2009)
View 1 Replies
View Related
Oct 5, 2010
I've messed up my MacBook and it's now running really slowly (even just clicking on icons, going into folders and suchlike) and I need to find out the best way to sort out the following issue:
I wanted to back up my pictures and (now realise, foolishly) moved them from iPhoto to my desktop so I could transfer it to an external hard drive. It was hanging and had the spinning beachball. This was 7 days ago; it looks like it's done it and is now running very slowly, I know it's lagging because the clocks shows it is sometimes 10 minutes slow and it's whirring and doing something.
I had unplugged the hard drive in case it was slow due to that and from researching other forums for advice I have been able to check the Activity Monitor - the CPU is fine but the disk space is almost zilch (all blue and no green). I now want to delete the pics off my desktop as I'm sure this is the root of the problem. Is there a simple/easy way or do I really have to be patient, delete and trash them one by one?
As you can tell I am not a full on techie but understand simple instruction, so please if you can help me resolve this, I'd be very grateful.
View 2 Replies
View Related
Sep 1, 2010
I recently upgraded my system HDD to an SSD with a new install of OSX 10.6.4 and mimicked the settings I had on my previous set up to replicate it. however, when for example I was using iTunes to play music the screen saver would come on and a short time later the system would pause iTunes and goes into Sleep mode.
my previous install never did that so I'm not sure if its because of the SSD and it not being mechanical it doesnt recognize it accessing or seeking 'per se' because regardless of unchecking "Put hard disks to sleep when possible" it still does it. here is an image of energy saver settings; btw I had the system plugged into and still went into sleep mode when iTunes was playing and even other media formats such as Video in iTunes or VLC.
View 2 Replies
View Related
Oct 26, 2006
Each time I open my powerbook today it is completely unresponsive.
Mouse wont work.Trackpad wont work. Can't alt+tab between apps.
The only thing i can do is hold down the power button to reboot.
View 4 Replies
View Related
Jan 23, 2009
I have an iMac (20" 2.4 g, 3 gig ram, os 10.5.6) that has recently stopped waking up after a long night of sleep. I have also found that the mouse and keyboard become unresponsive if the mac does wake up. The mouse has power, but the keyboard does not show any sign of life. The mouse glows red, but when I hit caps-lock, the little green light doesn't come on. I have tried switching ports, but no dice. As I said, the USB port clearly is sending power to the mouse, but not accepting any input. When I restart, all is well on most occassions, but the problem has persisted, once or twice, after a re-boot.
View 1 Replies
View Related
Mar 23, 2012
safari is slow and unresponsive
Info:MacBook, Mac OS X(10.4.2)
View 1 Replies
View Related
May 3, 2012
My MacBook pro is running very slow and unresponsive.I have mid 2010 model running on lion. Past few days it looks very unresponsive. Tried to reinstall lion as clean copy. Still no luck.
Info:
MacBook Pro, Mac OS X (10.7.2)
View 4 Replies
View Related
Nov 20, 2010
I just got a 13" MacBook Air and I'm having an issue with it; googling around I've seen slightly similar problems, but nothing identical to what is going on with mine. I have the trackpad set to use the "tap to click" option in System Preferences and I've noticed that after I sleep the machine and wake it again, something gets bungled with it. The tap to click either stops responding entirely, requiring that I use the regular physical click instead, or it's highly, highly unresponsive. I've seen other reports of erratic clicking and the mouse moving on its own after sleeping the laptop.
Which thankfully mine isn't doing, but I haven't seen anybody reporting this slightly more demure issue. In any event, rebooting the machine fixes the problem completely until I sleep it next. I'm not 100% convinced that this is an Air issue, however, since I think it affected my 15" MacBook Pro to a lesser degree right after I upgraded that machine to 10.6.5, but I can't be entire certain of that since I no longer have that laptop and rarely used it without an external mouse in the first place.
View 5 Replies
View Related
Apr 9, 2012
MacPro 12 Core is going into sleep mode (so it seems) and becomes unresponsive requiring a hard reboot by holding the power button. Did this on a new user account I created, then it did it in Recovery Mode while using Disk Utility to repair the drives. I was about to try reinstalling OS X but it seems that this maybe a hardware problem if it happened in Recovery mode. Is my thinking right, or could it still be software? Trying to run Hardware test (D on startup) but can't get it to work so far.
View 11 Replies
View Related
Sep 27, 2009
Is anybody else experiencing some horrible performance when running iTunes? I know it's an resource hog, but it's really laggy and unresponsive.. and using more than 100% cpu ....? (I'm running it on a 2009 octo-core MP)
View 21 Replies
View Related
Jun 3, 2012
My mouse pad is unresponsive or extremely slow in responding. Very herky jerky. Same problem with the key board.
Info:
MacBook pro, Mac OS X (10.5.8)
View 1 Replies
View Related
Jul 2, 2008
Because it happened to me a few times where the cursor will skip or one time the cursor wont even move or be responsive with my finger. The weird part is that once I exit safari the trackpad seems to work again perfectly. Also not sure if its because I have sweaty hands and my fingers are too wet? But its not something excessively sweaty or nasty just a lil moisture I guess on my finger tips at times.
Update: Never mind, found out the culprit istat pro.
View 1 Replies
View Related
