Using a Macbook pro 10.6.7..4 gigs of ram...Was using it earlier Today 100% fine...Than I come back home and go on my macbook to see its running RIDICULOUSLY SLOWWWWWWW..And by slow I mean the mouse movement has tracks and re starting literally took longer..Opening firefox took forever...What the **** Happened?
Info:
MacBook
Pro, Mac OS X (10.6.8)
I have a 13" MacBook Pro mid 2010 with 2.4GHz Intel Core 2 Duo running Mac OS X Lion and it is so slow, the boot take a couple of minutes, when using the laptop general experience is just really slow and crashes alot. Its always kept updated and is well looked after.
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.3)
My iMac is running incredibly slow. Takes 5 to 7 minutes to load just about everything. I can't get on Internet because then my wifi shuts down.
Info:iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
I was recently given a (supposedly) non-functional iBook. I reinstalled Tiger on it, and it did fine through the installation and initial startup. However, everything runs really, really slow. It will work normally for about 5 seconds, and then slow to a crawl. Opening system preferences just took 5 minutes. The beach ball shows up with nearly every click.
Anyone know what this means? Bad ram? Bad HD? It is the 14" 1.42 ghz model with 756 mb ram.
Oh yeah, the reason it was presumed dead was because the previous owner smacked it on something, and the LCD screen is bashed up. The rest of it seems physically fine, but it was subject to some sort of impact.
I am using a MacBook Pro which has the following:
Processor - 2.33 GHz Intel Core 2 Duo
Memory - 2 GB 667 MHz DDR2 SDRAM
Mac OS X - Version 10.4.11
Today my finder started to run extremely slow at certain points. When I attempt to look in a folder that contains files that are greater than a couple of megabites it can take up to 3 minutes for it to work or show any preview images/icons. I just get the multi-coloured spinning circle. There is no disruption with any of the applications I am running or my internet access, just to the navigation through my files in my finder window. My Software and security updates are up to date and I hadn't recently downloaded any software. I did have to manually disconnect an external hard-drive last night as it wouldn't let me eject it through my finder window, stating the 'volume was in use.'
My Mac Mini is running extremely slow - I get a spinning ball at every move. Ready to throw it out the window.
Info:
Mac mini, Mac OS X (10.6.8)
My Macbook Pro (from mid-2010) has recently started running EXTREMELY slowly, and the fan continuously runs loudly. From other posts, I have checked my activity monitor to see if any process is taking up a lot of the CPU % and have found that nothing seems high, except the kernel_task which, from what I understand, is supposed to be high. I have also attempted to reset the SMC which didn't fix the problem either. I have taken my computer to the genius bar 3 times now, and they keep telling me nothing is wrong (because it works perfectly there), but when I get it home the fan comes back on, and everything runs slowly.
Info:
MacBook Pro (13-inch Mid 2010), OS X Mavericks (10.9.2)
Battery is extremely hot and fan is always running. Regardless if I am watching a video or writing a document
Info:
MacBook Pro
So i just got my macbook air today, and im loving it. The only problem is that the internet on this thing is SLOW. I have pretty decent internet at home, both my pc and macbook pro (2007) is fine. But on the MBA, a normal website takes minutes before being completely loaded. I just tested all my computers on speedtest.net, and my mbp was able to get 11.86download and 0.84upload, while my MBA get 0.45download and 0.15upload Is anyone else getting this problem?
View 6 Replies View RelatedI just dropped in a WD Scorpio 7200 320GB drive in my mid-2009 mbp. I successfully cloned my previous drive. It took forever to boot the first time and every subsequent time. It takes hours to install the os fresh after wiping it. Not at all how I expected the swap to go. What do you all think? Swap it out for another because this one is a bad egg?
I have done a guid partition and it is formatted in mac os x extended and journaled.
When i boot from my old drive, now in a usb enclosure, everything is fine. However when I access the new internal drive it hangs and just doesn't play well with it at all.
I have a late 2009 Macbook Pro. It gets extremely hot on the bottom and I am worried there might come a time where it overheats. I don't have the vents blocked, I shut it down consistently, and yet it still gets hot, almost to the point of being uncomfortable to the touch. I have tried looking up info, but am not sure where to go. What should be my next steps?
View 2 Replies View RelatedSo when I use internet to connect to my WiFi connection, the speeds are at dial-up levels. My MacBook is almost right next to the router. After plugging ethernet in to it, it's going as fast as DSL should be.. 10-15x faster than it is over wireless. I understand that wired is always a little faster, but the difference shouldn't be this drastic. What should I do?
View 4 Replies View RelatedI have had my Macbook Air for a little more than 2 years. It has always worked pretty well. However, recently I went on vacation for 1 week without my laptop. When I returned home and went to turn on my computer, I noticed that it had become extremely slow. Firstly, turning on my computer has become an abnormally long process. It used to take about 2-3 minutes to turn on. Now, it takes a solid 10 minutes. Not only this, but once my computer has finally turned in, it usually takes another 10 minutes before I can open an internet browser. When I click on the browser (I used Google Chrome) no window will pop up, and after a few more clicks, my screen will freeze completely. Sometimes I will get the rainbow wheel and sometimes the screen just completely freezes without it. Sometimes I will try closing the lid of my computer and then reopening it, but when I do this, the screen stays black for a long period of time even after I have reopened it, almost as if the computer is off. After an excessive amount of key smashing and an abnormally large amount of time, the screen will finally stop being in sleep mode and show my desktop. Even then, my computer will still barely work. Once I finally get a window open and start using the internet, google chrome will end up crashing within at least 20 minutes. The entire screen will freeze, I won't be able to scroll down or exit out of the window, and I then usually have to repeat the painful process that I described above when I attempt to open my browser.
It has been over a week since I returned from vacation, and I deal with these issues every time. My computer has always been fine in the past, why is this suddenly happening? I have tried to remove some of my applications my going into Finder and highlighting the application and clicking Move to Trash, and then emptying the trash. This hasn't helped at all. Do you think that it would help to delete some of my files and data (pictures, documents, screenshots, downloads, ect) or is this irrelevant?
Info:
MacBook Air
This ended up being pretty long but I tried to include as many details as possible. If any more information is needed please just let me know in this thread. I have been trying to figure this out all day and it has been driving me nuts. First of all I have a Macbook with a 2.4GHz Intel Core 2 Duo processor, 4 GB of RAM and am running Mac OS X Version 10.5.6. Also this is the last generation of the "white" macbook that came out in February I believe of last year.
My external HD is a 1TB Rock Mobile Disk. For some reason when I try to transfer files to or from the external HD to my Mac I am getting nowhere near the expected 480MB/s. I do use a Swiss Gear 4-port USB splitter. When I use the splitter I am getting a transfer rate of about 120MB/s and without it I am only getting about 300MB/s. This is of course if I am only trying to transfer one 800MB movie. If I attempt to transfer multiple seasons of television shows it will drop to as low as 40-50MB/s. Also, if I were to be transferring a single season of a TV show. The transfer speed is much faster to click and drag every episode from my HD to my Mac than it is to transfer the entire folder at once. The whole folder might take 25 minutes but one at a time it will only take about 5.
My mouse pad is unresponsive or extremely slow in responding. Very herky jerky. Same problem with the key board.
Info:
MacBook pro, Mac OS X (10.5.8)
My Macbook pro has recently (a few weeks now) been giving me trouble. When I connect my charger a few things happen.
1. The chargers "brick" is extremely hot. (Note: this can usually be solved by placing the brick on a hard surface rather than a soft one).
2. My computer becomes extremely hot (Note: placing on hard surface sometimes allows computer to cool down, but not for long).
3. The part of my charger that connects to the port on my macbook is ridiculously hot.
4. A light hissing sound comes from my my computer where the charger is connected 5. My computer is very slow to charge and sometimes doesn't charge at all
All of this seemed like an easy fix: get a new charger. However, I've used other chargers (from people who have absolutely no issues of their own with them) and I still have the same problems
Info:
MacBook Pro (13-inch Early 2011), OS X Mavericks (10.9.4)
Friday afternoon my Mac froze and after powering down and restarting, it has been extremely slow. Before now it was running perfectly. Now, it takes about 20 minutes to start up and then about another 20 minutes to load the dock and another 20 minutes to open an app, etc. It's impossible to use. I get the loading wheel between every word I type.
After running in safe mode/repairing hard drive/etc. nothing had changed. So I just decided to backup all of my stuff and try to restore it to factory settings. I erased the hardrive and set up my computer again. It's still running the same way though. Extremely slow, impossible to use. I'm running on Mavericks 10.9.3. Is there anything I could do or could this be something like a failing hard drive?
I bought my mac about 8 months ago. I already made an appointment at the genius bar for tomorrow night but I would really really rather not have to go.
Info:
MacBook Pro, Mac OS X (10.7.5)
I have a Macbook Pro late 2011 all Lion updates applied and want to use the integrated SD Card Reader (which, according to System Profiler is connected directly to the PCIe Bus).
My SD card is a brand new Sandisk Extreme Pro, which is rated for 95MB/sec and 90MB/sec write speed. Reading from the card is quite fast, I get over 88MB/sec. Writing, however, is abysmally slow. I could not get more than 12,6MB/sec write speed (tested via transferring a 4GB ISO Image from/to the internal SSD). The same card on an old USB 2.0 reader connected to an ancient PC gives around 20MB/sec. I did not test it on another device with a fast SD reader yet.
Info:
Macbook Pro, Mac OS X (10.7.2)
my Mac's start up is fine, until I get the the window with the bar that says "OS X starting up". This is the *really* slow bit. I am grateful for the fact that my old Power Mac is yet still faster at starting than my PC, but it is a whole lot slower than it should be. When I say "should be", all the Macs at school, or at the apple shop barely show the start up bar window. Ok, granted that they are a great deal newer and faster, but after a clean install of OS X on my machine, that bar was there for a maximum of 5 seconds. Now it usually takes 20-30 seconds.
Right, on to the things I have already tried:
* Cleaning out login items
* Turning off auto login
* Checking all my fonts
* Disabling the unused fonts
* Cleaning cache files and restarting twice
* Unplugging all of my hardware, bar the monitor
Even after trying everything on this list, plus a few hundred restarts, it is still booting up slowly. Does anybody have anymore ideas? Also, if somebody could please let me know where the log for system start up is stored, I will look through it and post it. Also, I should note that I am running OS X 10.4.11 'Tiger'.
I don't really know what is wrong, it's a fresh installation and it's just extremely laggy, liquify is slow as heck, drawing and doing anything is just choppy or buggy. Heck, my MB is more than decent for PS, so I don't know what is going on!
CS4 ran fine with no lag, and CS3 on my old p4 with 512mb ram runs smooth as silk with no lag, even when I use liquify, and even then it's only allowed to use 170mb of it.
I know this is a well known problem and I am not the only one, but I just wanted to know what exactly is the problem if anybody has managed to fix it, and a lot of the menu's and window structures are a bit off/messed up as well, it seems to me that a lot of unneeded yet subtle changes were made, and it's annoying as well.
I have mini with a wireless g card and a my MB with it's wireless n card on my network at home. My router is a fairly old Netgear wireless g router. My MB is extremely slow at times on my home network. I've never heard of backwards compatibility issues with wireless n cards, but I'm at a loss to explain this. It sometimes takes close to a minute to completely load a page on my MB.
View 17 Replies View RelatedI have this MBP 13'' Mac OS X 10.7.5 running a 2.4GHz i5, 4GB RAMs and 500GB storage.The problem started yesterday when I was typing on Word and I copy pasted something from the net (chrome browser) then it froze.I waited for around 5minutes and still frozen with the spinning wheel, then I decided to turn it off by pressing power for 10 seconds restarted my
MBP then now it running so slow on start-up and apps are very slow to open like around 5 minutes. Every action that I try to do like clicking on the apple in the upper left it freezes showing a spinning wheel and it will take time to show the drop down options. I checked disk utility and it said that HD is ok, done verify/permission verify and repair.
I checked the activity monitor noting the ram/CPU usage and its normal it even tells that 2GB of ram is not use.It shows not responding in the activity monitor if you open an app for around 5mins then it opens or it will crash.I already done the 2 kinds of reset and did not work.BUT it opens normally in Safe mode.
Info:
MacBook Pro, Mac OS X (10.7.5)
I just did a clean install of the mac and I'm noticing it is extremely slow at copying files back from an External HDD. It is on USB 2.0 connection, and still going maybe 10MB/minute. This is the speed I'd expect from a 1.0 connection. I've checked the wires, everything is connected. I thought maybe I'd speed it up by using an External DVD drive to copy the 20GB music library back from the DVDs rather than the external -- but the external DVD drive showed the same slow speed. The drive didn't even seem to spin up to read faster (like it normally would, it reads/writes quicker than the slot drive on the imac).
It just ran as slow as possible, with the same slow transfer rate. I've been going for a couple hours or more now, and only have 4GB of 16 copied over. I'm guessing there could be a reason for this that I'm missing. It's a fresh install, all updates installed on this Tiger 10.4.11 OS X. External is formatted HFS+ and the iTunes library does not contain any single file over 4 GB, or even close to 1GB. (just music/library files). There has been no problem with the media before.
My '08 mac pro has a pioneer dvr-112D in it and it seems to be extremely slow when ripping DVDs in windows/bootcamp. It will take 30+ minutes to rip a DVD whereas it only takes 9 minutes on my PC. I ran the Nero discspeed benchmark and it says the drive is only reading at ~10X max at the end of the test. The drive should be good for 18X right?
This happens in both XP and windows 7.
I've checked that DMA mode is enabled so it's not an issue of it being in PIO mode.
I recently ran monolingual and installed Sophos antivirus. I think the problem started after Sophos free antivirus for Mac. But now the computer frequently displays the spinning wheel but Activity Monitor shows no CPU activity. While this happens I can not do much with the computer.
Info:
MacBook Air, Mac OS X (10.7.3)
Yesterday morning during working on the mac, the system started to become extremely slow till the point that even the mouse didn't respond any longer and I only got the spinning ball showing. No webpages opened up any longer and closing the program I was working in (Sibelius 7), took a very long time.
I did a system clean with Onyx (for Lion), did a virus and trojan check and followed the advice on the Viruses page in this forum on checking the firewall. It wx After that everything seemed to be OK and the system was fast again. Now after about 1 hour working, again it styartys to show the same symtoms, getting slower and having the spinning ball showing up more ad more.
Info:
Logic Studio, Mac OS X (10.7.4)
Parallels 5 on 10.6.2 has been extremely slow to launch for me. The icon will bounce in the dock for about minute, then hang for another a minute or two, then finally launch. Tried reinstalling, repairing permissions, etc. However, it seems that disabling the spotlight fixes the issue, so it's apparently related to that...but I don't want to have to disable spotlight.
View 2 Replies View Relatedssh login from my 10.6.2 mac to a linux system is extremely slow -- about a minute to get the login prompts. In comparison, ssh login to the same linux machine from putty.exe on Windows XP is almost instantaneous. I have tried adjusting the parameters on both client and host, without much improvement. However, the "1" protocol level seems a little faster. I have setup the keys ("2" level), and that works (without need for pasword), but is still very slow.
I installed putty from macports onto the mac. I got it to work using the "1" protocol level, but it is just as slow as from the terminal command line. All of the above tests were done on a local network with addresses like 192.168.0.102, so I don't think DNS is a factor.
I'm running Snow Leopard on a Mac Pro. I often connect to a Linux server sitting at the office through afp. It connects fine, but very quickly the response time of the folders becomes extremely slow. Granted there are fire walls and network magic and whatnot between here and that server that don't exist inside the network at the office. But I feel as if this is a more recent phenomena. Connections in this way have been a little sluggish in the past, but now it's consistently unbearable--beach balls and unresponsive Finder windows. I have an internal RAID pair, and extra drives, and shared connections all talking to this machine.
Which clearly causes the occasional "hiccup" in the system. Like sometimes I wait for folders to load, or like VMWare pausing for a few seconds when trying to access some of the Mac drives. But, for the most part, the system works fast and fine. I've tried to watch the Activity Monitor while accessing the Finder windows on the server. And, all that I've learned is that FireFox is big resource hog, and that Finder barely registers any CPU effort when I click into those drives. Speakeasy tells me I'm getting around 14 Mbps for network speed. The server itself seems to be running fine (according to top and snappy terminal responses). [URL]
I am in charge of a building level network at a primary (k-2) school. The problem I am having with our computer labs is that the student logons are extremely slow. The lab is running Emacs with 1.25 G4. 512 DDR, and Mac OSX 10.4.7 Appletalk, Bonjour, and LDAPv3 are enabled in Directory Access. They are also running DHCP for their IP. The server is a Xserv running Mac OSX Server 10.4.7 with 2 ghz G5 and 512 ddr.
I recently upgraded from 10.3.9 to 10.4.7 on the server. There is one drive that maps on logon. The dock, System Preferences, and logon are managed for the students in Workgroup Manager. They are all directly connected to 10/100 switch my office/server room/switch closet. Dose anyone know a way I can make the network logons faster? It is taking almost 2 to 3 minutes for an average student to load. The funny thing is it is very sporadic. Sometimes they will get on quick and all is well. Some times it tells me their home folder is missing or the dock has all kinds of stuff it�s not supposed to have. Sometimes they can�t even logon! It dose not seem to be a specific computer�. Its random on what logon times or if the student account will work.
