MacBook Pro :: Expand Both Partitions To Fit The New Drive?
Mar 24, 2012
I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive? I have tried bootcamp and have had no luck due to the fact that boot camp doesn't see the additional HDD space of 250Gb. What am I not doing?
Info:
MacBook Pro, Mac OS X (10.7.3)
View 5 Replies
ADVERTISEMENT
Oct 4, 2010
I used the typical installation in parallels 5, of which it automatically set up the virtual hard drive size. if I find I need more space later on, is there anyway I can expand the virtual hard drive size? I have a macbook pro i7 2010 running windows 7 pro 64 bit.
View 1 Replies
View Related
Dec 3, 2009
I replaced the 160GB drive in my 13" MBP with a 640GB drive. I now have the 160 in an external enclosure. I got the huge drive so I can finally copy all my crap from my PC to my MBP and have it in one place. I don't have any big external drives, so I had 2 ideas:
- Make the 640 into 100 and 540 partitions, with the system on 100, and use the external 160 with time machine (assuming that's possible with TM?).
- Make the 640 into 160 and 480, system on 160, clone the system to the external 160 regularly as a backup. This seems better since the external will then be a full working system (I assume), in case my internal drive would ever break.
With either of these, I'm wondering how easy it is to separate all my media onto the other partition, like the itunes library, pictures folder, movies, downloads, etc. Or Should I just stick with one huge partition, and figure out some other partial-backup solution / wait till I get a big external?
View 13 Replies
View Related
Dec 10, 2010
Is it possible to use an external hard drive (WD Passport) for both osx and windows ?
I read WD Passport has some sort of software built in, and the partition for mac and windows differs.
View 5 Replies
View Related
Jun 28, 2014
I recently purchased a 120gb SSD to put in my mac mini. In preparation for this, I created a second partition on my drive as a data drive where I will store things in order to make a time machine backup with the 120gb drive. Everything went as planned, except now, I cannot expand my data partition to use the whole disk. Below is a screen capture of what I'm talking about:
To accomplish putting my OS on only 120GB of hard drive, I've made symbolic links for most of the folders in my ~/ folder
This is what the ~/ Folder looks like on my Macintosh HD partition
This is where these files are actually located
As far as I can gather, the only way I can combine these partitions now is to re-format the entire drive, which as you can see would cause me many problems. How to expand a partition "upwards" for lack of a better term? I'm fairly new to Mac.
View 1 Replies
View Related
Jun 6, 2012
I have an external hard drive with 2 partitions: One for my video and music files (named jukebox) and another for time machine (named time machine). The external hard drive itself is a 1TB WD Elements. If I open up disk utility I can see the name "1TB WD Elements 1023" with 2 subpartitions as above named. Similarly when I plug it in to my playstation the drive is displayed as "USB WD Elements 1023". How do I change the name "1TB WD Elements 1023" to something else? I can find it in finder and I can seem to find any command to change it within disk utility. I really like to change it as I sometimes have another WD Elements drive plugged in to the playstation as well and they both have the same name which is confusing.
Info:
MacBook
Pro, Mac OS X (10.7.4)
View 4 Replies
View Related
Jun 2, 2012
I wasn't sure if it wouls be a bad idea if I wiped the interal hard drive while I'm booting from a recovery disk, then made a RAID 0 with the internal drive and my FW800 external drive. I'm nearing my max for the internal drive. I have a second FW400 drive backing up with Time Machine. I was hoping to just wipe, make the raid volume, and then restore from the Time Machine backup.
I guess even before that, my FW800 is not working in Lion. I reformatted while connected by USB, reset power management, and reset PRAM, but the firewire bus panics and takes out the Time Machine on FW400 as well. Is there a fix for this somewhere that I'm missing? I bought the FW800 drive for the above reason, only to run into a wall trying to make it work. I really don't want to do a RAID 0 with a USB connection.
I'm not going to try setting up the RAID 0 until I get the FW800 drive working reliably, but I was hoping to kill two birds with one stone.
Info:
iMac (24-inch Early 2008), Mac OS X (10.7.4)
View 2 Replies
View Related
Mar 3, 2009
I want to partition my external hard drive for my g4 power based mac running Leopard.I will have one partition for Time Machine and the other for Carbon Copy Cloner.Here are my questions:1. Which partition scheme should I choose for Time machine?2. Does Carbon Copy Cloner work the same way for non-intel macs as it does for intel? Do I need to click on the OS 9 check box to make my version of CCC bootable (I want a bootable clone)? Which partition scheme should I choose for Time machine?
View 1 Replies
View Related
Mar 7, 2010
I have an iMac 2.4ghz with a 320g hd, that I partitioned 50/270 when I installed Leopard. I read somewhere to have the opp system partitioned and I have been kicking myself in the rear ever since. Too many apps and files want to run next to the opp system, so I'm starting over.I used time machine for a backup of the system (both partitions are showing) on my 1 TB iomega external hard drive (minimax). I partitioned the external 500/500, time machine/additional storage.So that is what I'm working with, now for the question:With my backup complete, if I do a clean install to the internal hard drive (320g) in order to remove the 50g opp/sys partition and just have one 320g internal hd; will my time machine be able to restore to a clean 320 without having the 50/270gig partition setup? If so will this be a somewhat simple process?
View 3 Replies
View Related
Sep 14, 2010
What happens when 3 people try to access different partitions at the same time on my 2 TB drive that is connected to the Airport Extreme? I'm assuming with only 1 arm something would get messed up. Example: watching Iron Man 2 from the hard drive with apple TV and then my wife starts going through photos on her MBP, then my iMac starts doing its time machine business.
View 3 Replies
View Related
Dec 27, 2010
I've had my MBP since August of this year, but only recently connected an NTFS drive via Firewire for the first time. I am primarily going to be moving the data from the NTFS drive onto an HFS drive. My only issue is that my MBP is only recognizing one out of two partitions on the NTFS drive (The "first" partition. If I connect back to my Windows PC, everything is recognized fine. I've since moved the data that I want to transfer from Partition 2 to Partition 1 and I'm able to access it correctly, however I'm confused as to why this is happening (still fairly new to Macs).
View 3 Replies
View Related
Apr 7, 2009
I want to share one external drive with both my PC and Mac. I do not want to share the data. I want to use the PC partition to backup my Vista OS and want to use the Mac partition to backup my Mac OS. what is the best way to configure this?
I had created an NTFS partition using my Vista machine, but when I plugged in the external drive into my Mac and tried to create a Mac OS Extended partition, I lost my NTFS partion.
View 5 Replies
View Related
Jun 29, 2009
Hi. What do I select for # of partitions on a MacBook Pro 15 inch? I haven't started yet, but I was hoping to understand what this means before I take it apart.
Any other advice before I start? I saw a good YouTube video that seems to make is easy to do.
View 2 Replies
View Related
Dec 24, 2009
My MacOS partition recently crashed, fortunately my bootcamp Windows partition still works.The next problem I'm having is that my Mac OS cd is lost and I only have an image of it on my harddrive and dont currently dint have the possibility to burn it.This is what I want to do, I want to put the installation files on a USB driver I have to boot the "installation cd" from there. The problem is that all the guides show how to install it from a flash drive configured from Mac OS. I have MacDrive installed in Windows but im not able to format it to be bootable.
View 5 Replies
View Related
Dec 1, 2014
I use a 250GB external HD for most of my working files. It has five equal partitions. In one of the partitions--Cedar Mill (see attached images) --another partition (CM News) shows up in Finder. Inside CM News is another copy of itself ad infinitum...
I am reluctant to delete them without knowing what I'm doing. How they got this way.
I haven't noticed any particular problems, except possibly slow search times for opening/finding files...
Info:
iMac (21.5-inch Late 2009), OS X Mavericks (10.9.5)
View 5 Replies
View Related
Dec 7, 2014
I have issues w/ one of the partitions on my hard drive. Can I remove one (of two) w/o erasing the entire disk?
Info:
iMac, OS X Mavericks (10.9.1), iPad2, iOS 7.0.4,
View 1 Replies
View Related
Jan 27, 2009
I've just ordered a Seagate 500gb portable hard drive. I want it for backing up my 250gb Macbook, storing films and also for exchanging files between computers (Mac and Windows).
After reading various posts on the forums I'm planning on making 3 partitions:
1) 300gb for time machine backup. Mac OS X Extended (Is this the same format as HFS+ just a different name?)
2) 15gb for exchanging files. FAT32
3) The remainder for storing films. Mac OS X Extended.
Have i got these formats correct and are they suitable?
Also, i read that FAT32 is fragile and data can get wiped off it. If this did happen to the FAT32 partition, would it jsut affect that partition or could it damage data in all the partitions?
View 6 Replies
View Related
Jan 11, 2010
I have still another EHD/TM question and I can't quite figure out where to ask for the help I need.
I have a Mac Pro OS 10.5.8 with 2 internal drives and a large EHD that I was using solely for Time Machine Back Up. After a recent conversation with tech support at Apple, I've decided that I should have still one more full copy of stuff that is critical to me--my original photographs. I currently only have the backup copy on TM.
So, I want to take my large LaCie EHD and partition it. I want to store things as follows:
1. Internal HD #1-primary HD containing all data except original photos
2. Internal HD #2-HD that contains nothing but original photos
3. EHD (LaCie):
a. Partition #1: Second copy of original photos
b. Partition #2: Time Machine back up of HD #1 and HD #2.
It seems as if it is easy enough to do the partition but I'm wondering if there is a way to get my original photos to go into both HD #2 and Partition #1 of the EHD at the same time that I import them via a card reader.
If not, I'm wondering how I can set this up so that I don't have to remember to copy the photos from HD #2 to the EHD. Do I have to use another back up program? If so, any recommendations? Will using another program mess up Time Machine? What am I not thinking about?
View 5 Replies
View Related
Mar 27, 2010
I know this isn't "Windows" per say, but I couldn't really find a closer forum to post in. I installed Ubuntu following their online guide using Bootcamp and such because I was curious. Now, it's not really working as much as I would like it to, and I'd like to remove the 90 or so Gigabytes I gave to Ubuntu in my partition.
I tried using the Disk Utility, and it always gets stuck on "preparing to remove partition". I waited for an hour and a half once, and it still had not progressed. I also tried using the Disk Utility off of my Mac OS X installation disk and saw the same failures and results. What can I do to remove this plaguing Ubuntu partition off of my hard drive for good?
View 12 Replies
View Related
Jun 8, 2010
How does one go about using an external HD for backing up on both Mac and Windows machines?
I would ideally like to use Time Machine on the mac side. I have a 1TB Western Digital. Plenty of space, because i dont have that much stuff to back up.
View 7 Replies
View Related
Dec 31, 2010
Is it possible to merge two partitions at Mac hard drive without re-installing the OS.
View 4 Replies
View Related
Dec 14, 2009
Just a quick rundown of what I'm trying to do here:I have a 1 TB external USB SimpleDrive hard drive that is currently partitioned into three partitions, two formatted with FAT32 and one formatted with HFS+ for Time Machine. I learned how to enable Mac OS X 10.6 Snow Leopard's NTFS read-write capability today and so I no longer need to keep my first two partitions as FAT32 (especially since I have files larger than 4 GB I would like to store on them). I have data on the first FAT32 partition that I would like to transfer to the second FAT32 partition once I have reformatted it as NTFS whereby I will then be able to reformat the first FAT32 partition to NTFS without losing my data.I have nothing important on the second FAT32 partition, but when I opened Disk Management in Administrative Tools in Windows 7, I found that the second FAT32 partition is currently set as the active partition of that volume. When I right-clicked and asked to Format that partition exclusively, I received the following
View 1 Replies
View Related
May 19, 2012
The video card on the G5 iMac that I was using died so I bought a Mac Pro with Lion installed. I'd like to keep the apps that are on the old drive but I understand that they won't work with Lion. The old drive from the G5iMac has two partitions with Tiger on one of them and nothing on the other one. I'm considering installing Snow Leopard on the other partition since it's documented that Snow Leopard will work with the apps that I used on Tiger. Does anyone know if it is possible to transfer apps from the Tiger partition to the Snow Leopard partition? I've heard it said that the move must be from one *drive* to another--that Apple does not support the transfer of apps from one OS from one partition to another on the same drive. (The Mac Pro has 2.8 GHz Quad Core Intel Xeon processer with 3gb of RAM.)
View 1 Replies
View Related
Dec 19, 2010
I have a Drobo hung via USB off my airport extreme. When I first connected it, the Drobo was formatted to be 2 tb but has since grown to over 6 tb in capacity. Now, one of the great things about Drobo is whenever you add space, it will partion the drives to give you the additional space, but this only really works if you have it connected to your computer directly.I have close to 6 tb of available space on my drobo, and only about 2 being used. My mac thinks the drobo is full and won't copy to it. Any way to get my iMac or airport extreme to recognize there is actually more space, or partitions?
View 2 Replies
View Related
May 27, 2012
Is there any chance that I can exand the memory of my Mac Air??
View 7 Replies
View Related
Mar 14, 2012
I would like to make my MacBook Pro faster. How much does it cost and what is the procedure?
Info:
MacBook Pro, Mac OS X (10.7.3)
View 2 Replies
View Related
Apr 4, 2012
how to expand document folder? i read alt+click? what is click?
View 2 Replies
View Related
Aug 31, 2014
How do I activate two finger screen expansion on my MacBook Pro...
View 1 Replies
View Related
Aug 29, 2010
I bought a battery for my macbook and now it has started to expand and make it useless as if it even connects, it doesnt let me use the trackpad! Its the only battery I have!
Do apple still have warrantly for abnormal battery? I'm in the UK and cant find a number to phone about this? Does anyone know the tel no?
View 1 Replies
View Related
Apr 26, 2012
Even when I hit the Green button on any window it never maximizes the screen size to fill up the screen and still keep the dock showing at the bottom?
Info:
MacBook, Mac OS X (10.6.8)
View 5 Replies
View Related