MacBook Pro :: Encountered A Slow Boot - Cannot Get Audit Control Port?
Apr 13, 2012
the mac boots very slowly recently, but it went faster a month ago. I use Command+V to boot in verbose mode, it displays "[Icannot get audit control port", and then blocks. After waiting for about one minute, it goes on for Ethernet detection, etc. The "one-minute" bothered me a lot. Probably it's a hardware issue or not? Do anyone know what's it, and how to fix it?I have a MBP 2010-13#model, installed with Lion OS.
Info:
MacBook
Pro, Mac OS X (10.7.3)
View 5 Replies
ADVERTISEMENT
Apr 1, 2012
I have the new 2012 Macbook Air 13''. I had heard there would be an infrared port so I can use my Mac remote control. I cannot confirm. Is this part of the 2012 Macbook Air?
Info:
macbook, Mac OS X (10.5.4)
View 4 Replies
View Related
Jun 29, 2014
Having just migrated from 10.6.8 where this problem didn't exist, I don't know where or what might be causing this in 10.9.3.Â
I run the JRivers music program Media Center and the normal player feeds the digital stream out the usb port to my DAC. It has 2 modes, starting up with exclusive access and not starting with exclusive access. I have tried it both ways with identical results.Â
If I run music thru the JRivers app and out the usb and then stop the player to have a browser (safari or firefox) play a video, the audio portion of the browser audio is sent to the front panel speaker and not to the usb port.
This wasn't the case with 10.6.8 where I would switch back and forth frequently. Now I have to restart the mac in order to 'release' the usb port back to the browser.
That is until I run the Media Center over usb.Â
I have run Audio Midi Setup, to see if I can 'release' the usb port, to no avail.Â
View 4 Replies
View Related
Oct 2, 2009
Ever since I downloaded the Control Center my mouse is screwed. When I scroll it goes REALLY REALLY slow, used to go fast. The only thing I changed is what the 2 buttons on the side do.
View 2 Replies
View Related
Sep 4, 2014
I've got a client who would like to audit calendar event removal. I'm not finding any seemingly good method for this, and I'm not seeing deletions being logged.
View 3 Replies
View Related
Nov 30, 2007
Been troubleshooting this one awhile...I even did an Archive and Reinstall....my Ethernet port on my 2.16Ghz MBP won't connect to anything. I get an IPv6 address when plugging into a router, but DHCP never works and a manually assigned IP doesn't work either. Reboot into Windows and it works fine...I've tried removing the Ethernet port, and have futzed with all the settings trying to reset it, but no dice. Problem started somewhere around 10.4.9, I think...I'm on 10.4.11...I reinstalled to .8 and worked my way back up...never works.
View 7 Replies
View Related
Nov 2, 2010
so for about 6 months I've been using my iMac's ethernet connection as an Air Port for both my iphone and roommates pc around the house. recently I was using my phone and the wifi all of a sudden was horrible, playing a quicktime video that took 2 seconds to begin before was literally impossible to play, and when switched to edge it was much faster.
I thought that something was acting up with my iphone and shrugged it off but my roommate soon complained the internet was being really slow on her pc. So I checked my Mac and it's internet connection was fine. The Air Port was on, I reset it, switched channels but same performance.
View 1 Replies
View Related
Feb 9, 2010
I had hooked up the MBA SuperDrive and wanted to see, just for fun, whether the machine could boot from a Knoppix DVD. (Knoppix is a Linux distribution that can run straight off the DVD without touching the harddisk.)
I tried and it seemed to work fine, until I got stuck on a blank screen. Oh well.
I switched off the MBA by holding the power button for >4 secs and it shut down. Rebooted, and noticed that the SuperDrive didn't make any noise. Once in OS X, I didn't get an icon for the DVD. Hmm. Hitting 'eject' didn't do anything.
View 1 Replies
View Related
Dec 21, 2010
All I do is to add/remove columns on a spreadsheet using Excel 2011 and I see beach balls every time. I'm using Ultimate 13" Air and only running iCal and Excel concurrently. Activity monitor shows excel using 0.2% of CPU. This puzzles me alot.
View 2 Replies
View Related
May 26, 2012
I've downloaded iMessage and i can't open it...it says: The server encountered an error processing registration. Please try again later.
Info:
MacBook Pro, Mac OS X (10.7.4)
View 1 Replies
View Related
Dec 25, 2008
This is the 1st time i got a Mac , i bought a black Macbook 2.4GHz some days ago .
I installed Windows Vista Ultimate using Boot Camp , and all went smoothly .
Only 1 prob is when restarting , i have to wait too long for the Windows to log on , i think about 1min with the black screen.
And if i want to boot in Mac OS , i have to push down the D button or the Alt, it takes quite a long time too .
So do you guys have any solution to this problem ? I want to get rid of the waiting time, way too much.
And do you know how to make my Macbook jump right in the choosing section when it starts ? ( so that i dont have to push down any button when it starts )
View 4 Replies
View Related
Jul 4, 2012
the server encountered an error processing registration. i have tried everything but still no luck .
View 8 Replies
View Related
Feb 19, 2012
I cannot log into IMessage on my mac. This is the message I get. The server encountered an error processing registration. Please try again later.
Info:
MacBook (13-inch Mid 2009), Mac OS X (10.7.3)
View 13 Replies
View Related
Jun 23, 2012
A while ago, my laptop starting booting up really slowly. I have looked at several answers and tried troubleshooting to no avail. Can anyone walk me through a fix? I am running 10.7.4.
Info:MacBook, Mac OS X (10.7.4)
View 8 Replies
View Related
Oct 20, 2010
How do I speed up boot.
View 2 Replies
View Related
Jun 28, 2014
I have a problem of a slow boot (3-4 minutes) with my MacBook Pro. Bought my first iMac 27" in December 2013 and going great. Decided to buy a 13" MacBook Pro retina with ssd in May and thought I would clone my iMac to the Pro. Before cloning Pro would boot up fast but after the clone it takes 3-4 minutes.
View 3 Replies
View Related
Sep 30, 2010
I have had my mbp15 2.4ghz i5 wth the stock drive for some weeks now and overall am quite pleased with it. However I was expecting to be blown away by the speed of it since I am coming from a 1st gen eee and a dell optiplex gx270 2.0ghz p4 4x256mb ram from 2003 but I am not! In all honesty I must admit that I was expecting more, battery life is great and number crunching is far superior on this i5, but my P4 running Ubuntu 10.10 boots in around 17 seconds from cold start to gnome while the MBP15 with OSX 10.6.4 takes roughly a full minute for a full boot, that is around the same time my win7 boots and no where near ubuntu 10.10, is that normal?
Also I did a very scientifically sound experiment starting numerous apps like chrome, safari and opera. All of which take multiple 'bounces' to start where in ubuntu chromium starts near instantly. Of course I couldn't even begin to run adobe cs5 on the p4 or the eee, but in lighter apps there is hardly any difference. I know a sandforce SSD would make a world of difference here and it is on my wishlist for 2011, but even with a 2010 HDD I was expecting more compared to the 2003 dell.
View 2 Replies
View Related
Dec 18, 2010
I have a 2008 2,4 MBP and I have a problem with it. I was using snow leopard and everything was going fine for a few months. Then suddenly, it froze on the desktop at the opening. After few minutes, and command+ctrl+Shift+esc, and a few prayers it sometimes came ok.
I got tired of that and decided to format my hard drive and reinstall osx. I had to do it 3 times before it worked. Then I installed the updates and BANG! New problem! Now it was booting for 6 minutes before I see the desktop.
View 5 Replies
View Related
Jun 24, 2012
I just bought the $1199 Macbook Air (2012). It works great but the start up time from when I hit the power button is significantly slower than my 2011 Macbook air. My 2012 takes about 35-40 seconds to boot-up. My 2011 takes about 15-10 seconds. I have downloaded all the updates and restarted several times but every time its still 35-40 seconds, Is this normal for the 2012's?
Info:MacBook Air, Mac OS X (10.7.4)
View 4 Replies
View Related
Jun 13, 2009
I bought this c2d macbook pro 15'' in early 2007. Today I installed windows 7 on it (bootcamp 2.1). Everything worked perfect except the screen brightness control. The strongest level is very bright (same as the one in Mac), but the second level is very dim. I remember having this problem back in 2007 when I installed winxp on my mac. Looks like the problem still exists. Anyone here knows how to fix it?
View 1 Replies
View Related
Jul 5, 2010
Just ordered an intel 80gig SSD for my first gen MP. Are there any downsides to putting it in my second optical bay to boot from? I'd rather use the regular HD bays for my other 3.5in drives. That and I won't need an Icydock for the SSD. And no I will not be using Windows, only OSX.
View 22 Replies
View Related
May 22, 2010
I just got my Intel X25m 160gb, and it's really fast, except for the boot time. It takes 30 to 32 seconds to boot each time. I searched around and I did what everyone else did to fix boot times, and I've had no luck. When I got it, I formatted it to Mac OS Extended (Journal), and made sure it was the startup disk in System Preferences. (here's a picture: ) Once the white screen with the apple logo comes up, it takes 10 seconds to boot into OSX. Any suggestions to decrease the boot time?
View 24 Replies
View Related
Mar 27, 2012
I had a system update a couple of days ago and since then I've noticed a slower boot time and my toolbar/applications hang for a while. It never used to do this before the update.
I'm on a Macbook Pro OS X 10.6.8.
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.6.8)
View 1 Replies
View Related
Sep 1, 2014
When I start up my MacBook Pro it is slow to boot up and when I open programs it takes a while for them to open. How to speed up my Mac?
Info:
MacBook Pro, OS X Mavericks (10.9.4)
View 8 Replies
View Related
Feb 28, 2010
I'm considering buying an old G3 500 Mhz laptop. Seller says it can't boot by itself, either through its own hard drive or an OS Panther installer in the cd drive. It does give the welcome chime but the screen then displays the folder with the question mark. So it's either the hard drive or the logic board. Anybody try to boot off the cd thru an external cd drive (with its own external power supply)? There is no firewire port on this model. Yeah I know I'm supposed to press the option key before the welcome chime.
View 2 Replies
View Related
Jul 9, 2009
. Ok so I installed Logitech Control Center so I can change the function of the buttons on my mouse. So when it was done installing it said that the computer had to restart, so I pressed ok, right when my Mac shut down, this pop said something about Boot Cache or something. The pop up only showed up for about 2 seconds and disappeared. I think Logitech Control Center reset my PRAM because I had to retype my network password and my date/time when my mac restarted. Is this normal? I deleted the Logitech Control Center icon in the System Preferences pane because it may be interfering with my Mac. Is there anything wrong with my Mac or is there nothing I should be worried about?
View 1 Replies
View Related
Mar 17, 2010
why does bootcamp boot up slow without optical drive hooked up?
View 1 Replies
View Related
May 5, 2010
So earlier after installing a windows 7 ultimate 64 bit RTM copy into bootcamp, things started acting up;
After installing some updates for 7, rebooting, it took about a minute to get the HD icons up to even choose one, and after that it was fine, except then the windows partition eventually just had a blinking cursor in the top right and stayed there.
I went into OSx, removed the 7 partition completely! my HD is one partition for Osx, but when I boot now, it takes yearsssss to just boot to osx, but if I hold option, then I instantly get a Macintosh HD (that's it) and it will go straight away.
What do I need to do? Reinstall SL? Please god no.
Partitions seem to be all messed up, maybe I will re create a windows install, and remove it again. (Xp this time)
Edit, This happened on 2 different MBP's one a 2.8 duo after I put on 7, they both take forever to boot to OSx. (With no BC partition even on)
View 2 Replies
View Related
Mar 22, 2012
My macboock 3,1 (A1181) is very slow on boot.
At first i get the white apple logo en the round indicator and then the screen turns blue/turcuse and it takes aprox 10min before i see the desktop. Its fast but not very fast to boot into safemode. When the computer is all booted up everything work great!Â
Ive tried to reinstall Snow Lion after i formated the drive but without any luck. Ive resetted SMC and PRAM. The superdrive has stopped work to, when i insert a disk i spinnsup for a min or a half then it ejects the disc.
I installed snow leopard now thru a external dvd via usb. AND! I almost forgot, the computer doesent get out of sleepmode after i closed the lid, Â
Info:
MacBook (13-inch Late 2007), Mac OS X (10.6.8)
View 1 Replies
View Related
May 12, 2009
I had a MBP with a 7200 RPM, 320 GB Hitachi Hard drive. I sold the MBP and got a white nvidia MB, but I kept the 7200 RPM drive and used it in the white MB (I did not reinstall the OS). Everything works fine, but I've noticed that it takes a very long time to boot. From the time I turn the MB on, to the time the spinning disk appears, it takes approx. 60 seconds. Other than that, the MB works fine. Should I do a clean install of Leopard. Would this help the slow boot time?
View 5 Replies
View Related
