does apple macbook pro contain HD led screen or is it just normal? well i know that the laptop comes with dvd rom and not bly ray but still if i have got HD videos and i play those videos. will they play in HD mode? and if yes than how many p does it support? 240 , 480 , 720 or 1080 p?
Info:
MacBook
I was trying to install Windows XP Pro, but for some reason the it wasn't showing another HDD to install Windows on. So I quit the install, and restarted my computer. Now all that happens is the normal grey screen appears (with no Apple logo), then it goes to a black screen and has the blinking cursor (Kinda like DOS).
View 14 Replies View RelatedUpon start up my screen goes to normal gray w/apple logo and spinner then goes black. Cursor is visible and still is moveable but nothing else. I safe booted and bar came up also but then back to black screen.Â
Info:
iMac, Mavericks upgrade
I have a MBA 13" late 2012. It was working fine and suddenly one day exactly left half of the screen went bright and right half was normal.There was no drop, nothing. It's exactly straight half line in between the screen. Where left part of the screen is brighter.
Info:
MacBook Air, OS X Mavericks (10.9.4)
I just installed last night the 1TB WD Scorpio Blue without a problem in a 2010 MBP 13", but seem to be having some issues now. Im showing the drive is shown w/red text and failing the SMART status in the disk utility. It showed verified when I installed it last night and reinstalled OS X, but now this. I have also been getting some beachballs, but does seem to be running fine now. Is this a sign of just a bad drive, or is it normal for a non-apple drive to fail the smart status check?
View 9 Replies View RelatedI have myself a unibody macbook 13'' and was searching for a unibody macbook pro 13" because of the longer battery life. On an auction site I've found a company that sells a unibody macbook pro 13" with a TFT screen and a resolution of 1280 x 800.
Now I have searched on the internet, but I couldn't find anything about a TFT screen on a 13" unibody. My question is: what is the difference between a normal LED-screen and a TFT-screen. Should I go for it of is the quality much worse?
My pops brought his macbook (older one) cross the boarder and on the way back i guess they took it apart and now when hes using it the screen goes from normal to random colors ( like the white noise things on tv, but colors) i will take pictures.
dad bought a mac book pro and i really dont want to keep using this Shi* acer so im trying to fix his old macbook.
My LED screen has gone wrong, it's like it is showing in negative.getting it back to normal.
Info:
Mac Pro (Mid 2010), iOS 5.1
This morning my MacBook Pro will not boot to the normal Lion screen. Pressing the Alt key during the start process I do get to the Macintosh HD, Recovery HD, Choose Network screen. The mouse moves around, the keyboard works, obviously the screen works, it appears to connect to the network.  I did notice when I double taped on the mouse pad it didn't work. What should I do next?
Info:
MacBook Pro, iOS 5.1.1
suddenly my screen color changed to negative/black on white. but when i inverted the screen did not back to normal quality. the trace or shadows remains when i move the window. when i log out it turns again to negative form. and when i log in it seems back to normal. but it does not have the same quality and sharpness.Â
View 8 Replies View RelatedI have been experiencing a problem lately. Once a while my MBP '10 screen will have a sudden drop of brightness and then back to normal. Does anyone have similar problem?
View 7 Replies View RelatedSo in a half-drunken stupor I dropped/threw my MBA on a mattress. The problem was that it was 'open', with the screen at its normal up position of maybe 135-degrees-or-so from the keyboard. Upon landing on the mattress, something in the hinge literally snapped (it sounded like a plasticky snap) and the screen went all the way backwards until it was flat - think 180 degree angle between keyboard and screen. Nothing seems to be malfunctioning yet. It's working just as before, except now there's a bigger tilt-back angle for the screen... I can tilt it back literally as much as I want. My question to you guys, assuming someone else has done this, is whether in the long run it's going to bite me in the ass. Because something definitely broke, I'm not sure whether what broke was 'important'.
View 24 Replies View RelatedThis started very suddenly today. I was in finder looking through some pictures when my screen suddenly turned blue. After a second, it faded back to normally, so I continued what I was doing. After about 5 minutes, it happened again, but faded back. It's be less than a half-hour, I haven't touched the computer but the screen is turning blue than fading back every half a minute or so. Every now and then, the screen stays blue for about 20 seconds.
View 12 Replies View RelatedI keep having the screen turn blue and then suddenly go back to normal. It's a quick flash, totally random, repetitive during operation, no noises, and nothing else is interrupted. It does not restart, log off, or try to. Is it about to die?
Info:
MacBook Pro, Mac OS X (10.7.3)
Is it possible to make the imac g5 lcd screen into a normal lcd screen that connects to a normal computer through something like VGA?
View 7 Replies View RelatedMy 2010 13" Pro seems to have some blue/magenta light leaking from the bottom of the screen. This is only visible with the brightness turned up and against a black background (i.e. when watching a letterbox movie). It's quite different from the "typical" white light leak that I've witnessed on other lcds. Would this be "normal"?
Also - and this may seem like nit-picking - but my caps lock key feels a bit flimsier than the rest of the keys. Again - is this "normal"?
I was trying to type a degree sign on a web page and it enlarged by screen. Now it jumps all over the place and is too large. How can I fix this?
Info:
MacBook (13-inch Early 2008), Mac OS X (10.7.3)
I tried to connect to a montor with a DVI connector but it's not getting a signal. Is there a quick fix? (School project today!!)
Info:
MacBook Pro, Mac OS X (10.6)
This is my first Mac so it's pretty much foreign to me. I was holding down control and accidently used two fingers to zoom on my track pad, and it zoomed in on my entire screen. How do I zoom out and get my screen back to normal?
Info:
MacBook Pro
My I-MAC will not go into normal operation when I press a key on the keyless board. New batteries are installed just this AM.
Info:
IMAC, Mac OS X (10.5.7), n/a
Screen will go completely black for a second then back to normal display.Makes no difference what application I'm using. Within last 10 minutes went black for 4 times. Does not power down, just screen goes black.Contacted support via phone, they had me shut down, unplug power cord, then plug in and start. Appeared ok while I was on phone with support.Didn't use imac for 1 1/2 hours, now I notice it going black again.
Info:
iMac, Mac OS X (10.6.8)
grey screen no apple followed by blue screen with vertical lines. Graphics and logic board replaced <6 months ago. What to do? I held down shift, it gets HOT HOT and makes noises. (for safety mode) followed by a blank grey screen and blue screen. Then tried the other way (I think it's command alt delete? I don't remember) and it turned from grey (no apple symbol) to blue blank. Then third time, grey followed by blue with vertical lines, not blocky clear lines that you can see if you are close to it.Â
Info:
MacBook Pro, OS Lion
Over the last few months there have begun to be hundreds of blue horizontal lines running across the screen and the sound fragmented, with the Mac crashing over 5 times a day. Normally, I would restart and the problem would be OK for a while.
However, now when I turn on hundreds of horizontal black/green lines appear in colums, the normal apple symbol comes up with the spinning loading item. Then a blue screen will appear and the normal log on profile selector doesn't appear. Then after a while the blue screen is covered the thousands of these black/green lines.
I have tried esc, command + control + F, holding down the control key and scrolling with the mouse, tapping on the mouse, and making a pinching motion on the mouse. How do I get my screen back to normal size?
Info:
iMac, Mac OS X (10.7.4)
During the boot-sequence the screen of my Imac 27" flashes green (once), then returns to normal. This does not happen when I boot my Windows (Bootcamp) partition, so I assume this is some kind of OSX driver error. This started to happen only after I installed the latest patch (10.9.3). How to get rid of it ?
Info:
iMac, OS X Mavericks (10.9.3)
So my girlfriend boss wanted me to fix her computer. So I brought it home turned it on, and it didnt chime but it booted to the gray screen with apple logo/ slashed circle/and folder with a "?" So I made a USB Mac OS x bootable drive (FLASH) held down alt (try using a windows keyboard its fun) was able to select option and install a fresh copy. all seemed well was running really hot so I poped of the screen. HOLY MOLY! this thing is CAKED with dust, and I am not kidding it has literally piles of dust. So I ran updates, and did firmware updates. Turned it off for the night. Â
The next morning I went to radio shack and got Dust remove spray, opened it up made sure I was carful taking off the screen, and blew the sucker out. now its NICE and CLEAN. then i made sure I plugged everything in and turned it on. Drive spun like normal, Optical checked for a CD, and fans are also running normally. but no chime, no nothing stays as silent as normal but doesnt budge, it is like it hangs. Â
Info:
iMac, Mac OS X (10.7)
I am looking at purchasing an Ibook G4 but the description of the item includes this:"When you switch it on it begins to load up i.e. the blue screen with the Apple logo, but then the screen goes black or flickers. Said friend has kindly wiped the hard drive for me so now when you switch it on it makes the �opening� noise then you get a blue screen with alternating �?� and the Finder logo."
I have a feeling this may have been a temporary fault with the screen connector being loose and possibly damaged.But i assume the alternating "?" and the "finder logo" is simply a lack of OS?
just installed 10.5.6 on their last gen. iBook.She left the iBook plugged in to the mains and came back to find that the iBook was alternating between the grey Apple screen and a light blue desktop screen where she could see the cursor. Sometimes it would also switch to a blue screen without a cursor.
I've tried holding shift during startup - no effect.
I've tried rebooting NVRAM - no effect.
before I went to bed, I was playing the Sims 2, when my iBook G4 crashed. Our power cord can be a bit dodgy, so sometimes that happens. I didn't really think about it much, just closed the laptop and went to sleep.Last Monday morning, I opened it and pressed the power button. It began turning on, and got as far as the grey screen with the apple and the spinning circle. And then it just froze. The circle stopped turning.
I freaked out a bit, and restarted it a bunch of times, each time with the same result. (One time it stopped spinning, and then told me a restart was required. Huh. The rest of the times the exact same thing happened though.) I even tried unplugging and removing the battery, but it made no difference. So eventually I just shut it and decided to try again later.Last Tuesday I opened it and pressed the power button without much hope, and again the apple and circle came up just fine, then stopped, but then a bunch of words and numbers popped up.I'm a complete computer noob, but they don't look good to me... or are they good?
Kernel version:
Darwin Kernel Version 7.9.0:
Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/REEASE_PPC
My MacBook stays at the apple screen.What can I do to fix the problem?
Info:
MacBook
