OS X :: Possible To Transfer Data From Old Hard Drive To A New Laptop?
Oct 26, 2010
my few months old 13" macbook pro (4gb ram, 500gb hard drive) was destroyed by liquid damage the other day . i was told the hard drive may be salvageable and that it would be easy enough to install in a new macbook by myself. however, i've been thinking of using the cost of a new macbook to buy a second- hand macbook pro instead. i presume i wouldnt be able to install the old hard drive on a macbook pro would i? if not then how would i transfer the data to it from the old one?
View 2 Replies
ADVERTISEMENT
Apr 20, 2012
Yesterday i spilled water all over my 13' macbook pro (oops!). Tomorrow i am going to the macstore to buy a new 13' macbook pro. My current notebook is almost two years old, runs moutian lion and has my very important paper on it. Will i be able to take the hard drive out of that one and put it in my new laptop?
Info:
MacBook Pro, Mac OS X (10.7.3)
View 6 Replies
View Related
Dec 4, 2014
My Mac book pro got damaged and no longer works properly. I believe that the hard drive is fine. Is there a inexpensive method of extracting the data from my intact hard drive?
View 2 Replies
View Related
Mar 5, 2010
I'm going to change hard drive on my macbook to an ssd drive. Is it possible to move all programs and setting I have on this hard drive so I don't have to re-install everything? First thought was time machine, but will this work? I mean, if it worked with time machine on a new hard drive it would be very easy to share shareware program with friends. Is it possible somehow? To get all the programs/settings to my new hard drive without having to re-install anything? (except the operating system),without having to re-activate serials etc etc.
View 8 Replies
View Related
Apr 4, 2012
I have MacBook Pro and just installed snow leopard. What else do I need to do to transfer all of my data off of my hard drive?
Info:
MacBook Pro, Mac OS X (10.6.8), It claims I've used 239 GB!!???
View 2 Replies
View Related
May 20, 2012
brought my mbp core 2 duo (2008) to the genius bar today and they said I needed a new logic board... I want to transfer all my data from the hard drive to an imac via a usb 2.0 to ide&sata cable - I took the hard drive out of the mbp, connected it to the cable - the usb side which is plugged into a 2010 imac light is on but no light is on the sata side and the ide/busy light is not on... the drive is not showing up anywhere on the imac.
Info:MacBook Pro (15-inch Early 2008), Mac OS X (10.5.8)
View 4 Replies
View Related
Mar 13, 2012
1. how i can transfer OR save my data or music to my external Hard Drive. As it keeps coming as my External drive is 'READ ONLY', when I have chnaged my 'Shared' setting sto Sharing.
2 I want to save my data to our 'Tera Byte External Hard Drive'?
Info:
iMac (21.5-inch Mid 2011), iOS 5.1
View 12 Replies
View Related
May 5, 2012
I had to get a new hard drive put into my macbook pro because it was failing. So, I moved all my data onto an external hard drive so I would not lose anything. But now I cannot get iphoto or imovie back onto my computer. It says I cannot open it because it is a time machine back up. I don't want to have to purchase iPhoto and iMovie again just because I had to replace my hard drive.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 4 Replies
View Related
May 5, 2012
I am going to install a new hard drive as well as expand the RAM to 8GB in my early 2009 Mac Mini 3.1 with 10.6.8. I'd like to retain Snow Leopard and all of my applications, their plug-ins and settings. What is the best way to assure that everything ends up on the new drive?
View 2 Replies
View Related
Apr 21, 2012
What is the easiest way to transfer data from my old ibook hard drive to my new imac?
Info:
iMac
View 1 Replies
View Related
Jun 1, 2012
I'm dying to retrieve my info from my old HDD in my MBP but I keep getting all sorts of ideas/advice about the info on the HDD won't be retrievable if there's a BIOS/Firmware password there.... My main focus and concern is all my mp3, avi, jpg, Jpeg files; I care zero for the programs cause I can always get them back...
Info:
MacBook Pro, Mac OS X (10.6.6)
View 4 Replies
View Related
Sep 6, 2014
I just purchased a new iMac 21.5 inch desktop and I'd like to take the hard drive out of my old macbook pro and transfer my iPhoto and iTunes library to this new desktop. How would I do that and what would I need? The macbook pro model is a 2010 13.3 2.4 2x2gb 250gb part number MC374LL/A.
Info:
Apple MacBook Pro "Core 2 Duo" 2.4 13" Mid-2010, Mac OS X (10.6.5)
View 6 Replies
View Related
Jan 27, 2010
I've got and OLD Toshiba Satellite 2100 CDS running windows 95. It actually still works. I need to get some files off of it, it's got is one usb port, another port I don't recognize, a floppy drive, and a CD drive (can't burn). I've tried just using a usb stick, but the Toshiba wants a driver to use it. I tried connecting to the internet with it through the usb, but it also wants a driver for that. This computer is set up for connection through dial up only. I don't have a modem capable of dial up.
View 4 Replies
View Related
Feb 10, 2012
How do I transfer all data from my old internal hard drive to a new internal hard drive? I have an iMac with a 320gb internal HD that is full and I am replacing it with a 2tb internal drive. I have several external drives; 1 tb, 2tb and 3 tb. The 2 tb is being used for Time Machine. Do I have to buy an enclosure? If so, where would I get an inexpensive one? I also want to partition the new internal drive for Windows, and I'm not sure how much space to use for that. I plan to use Windows to check my work in PowerPoint created on my Mac for clients on PCs.
Info:
iPod shuffle, Mac OS X (10.7.3)
View 1 Replies
View Related
Jul 3, 2010
just bought a new MacBook Pro, and I have my 3 kids' profiles on Rosetta Stone on my old iMac that I'd hate to lose. Has anyone found a way to move profile data/progress? My Google Fu has let me down.
View 4 Replies
View Related
Sep 10, 2014
What's the best way to transfer data from a 2013 iMac to a new Macbook Pro?
Info:
MacBook Pro (Retina, 13-inch, Mid 2014), OS X Mavericks (10.9.4)
View 3 Replies
View Related
Sep 6, 2009
Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
View 3 Replies
View Related
Jun 21, 2014
Suggested to move the original files to the EHD and leave the referenced files on the laptop to save space and still allow edits. My question is, if you are using Time Machine, what is it backing up on the LT and how do you apply this to the data on the EHD?
What I am trying to achieve is to move my Aperture library to an external HD. and clone it to a second drive and backup the laptop with Time Machine. After the next session I would again clone the 1st drive and rely on TM to continue to backup the LT.
View 1 Replies
View Related
Dec 10, 2014
I have lost all my data from my harts drive. The laptop is under warranty. I have been told that they have replaced my hard drive but could not get any data off the old one. I have now lost all my data, photos, files, music etc. NO backups, only simply because i did not know how to do them. Is there any way of getting the files back? All my work spreadsheets and accounts were also lost.
Info:
MacBook Pro (13-inch Mid 2012)
View 7 Replies
View Related
Feb 19, 2012
Each time I want to transfer any data from my laptop to an external hard drive disc, I can't do it, I just move the file to the destination but it don't accept it, it show me the sign "forbidden".
Info:
MacBook Pro, Mac OS X (10.7.2)
View 1 Replies
View Related
Mar 14, 2008
So, I think the standard 320 is a bit noisy when writing sometimes. I have a F1 750gig in bay 2, can some describe how i easily could transfer my boot drive data to this and use it as a bootdrive.
View 6 Replies
View Related
Jun 26, 2012
I have a 1TB Time capsule, I would like to attach a USB drive to the Time Capsule and transfer my iTunes Library to it so I can run itunes from wifi. I am new to network stuff. My current iTunes library is on a USB drive velcro'd to the back of my Macbook - rather inconvenient, the USB port is loose. The music files are external but the library files with ratings/play counts are in the iTunes folder.
Info:MacBook (13-inch Aluminum Late 2008), Mac OS X (10.7), 1TB Time Capsule (3rd Gen)
View 4 Replies
View Related
Aug 4, 2009
I have a iMac i am selling. I have backed it up onto a backup drive with carbon copy cloner. I also have the timemachine back up.I am buying a new imac. I might have sold my old one before the new one arrives. How can I add all my important files back. I do not want to clone the imac im selling.Want to start fresh, but keep all my documents, itunes, contacts etc.
View 18 Replies
View Related
Sep 15, 2010
Had a hard drive failing/failure. I am having my bad hard drive replaced with a bigger hard drive. (New Obviously) I have an iMac. (1.83GHz Intel Core 2 Duo 17-inch) To have my data transferred from the old drive will cost over a hundred bucks more. I am trying to save money but transferring it myself. All im looking to transfer is my photos. I did not have an external drive but i WILL purchse one now. My question, (to save some money) is how would i transfer my old pictures from my old drive, too my new installed hard drive. Can i use USB? Firewire?
View 2 Replies
View Related
Sep 11, 2009
I'm replacing my old 120gig hard drive with a new 320gig hard driveWhen Ive got the new hard drive installed can I just put the old hard drive in a enclosure kit/caddy and copy my music/movies/etc across to the new hard drive?Or do I have to copy the data off before I remove the old hard drive?
View 3 Replies
View Related
Mar 13, 2012
My external USB backup drive is not large enough. I purchased a Western Digital My Book USB 3 Tb drive and need to transfer all the data from my old drive to the new one.
Info:
iMac, Mac OS X (10.6.8)
View 2 Replies
View Related
Mar 15, 2012
Transfer information from one hard drive to another hard drive
Info:
PowerMac, Mac OS X (10.5.8), G5 dual 2.0 processors
View 4 Replies
View Related
Jan 10, 2011
also, their all .avi video's. and i'm really confused! also, quicktime isn't letting me play .avi videos for some reason! and vlc won't download for me. and i'll put them on a USB but they wont download on my computer!
View 4 Replies
View Related
Jan 25, 2009
I have a Imac 20 with a small 3.5 hard drive and I have bought a bigger 360 gig 3.5 hard drive to replace the old one. I have the new one in an external case with USB 2.0 right now. Is there some way I can transfer the entire contents of the old hard drive on to the new one and then swap out the old drive with the new drive and not miss a beat?
View 6 Replies
View Related
Nov 5, 2007
I have used the disk for a number of years - all appeared to work fine - I am now backing up my data and only get Very slow transfer speed using firewire 800 - 2 hrs to transfer 1.36 Gb. Disk is connected to a Dual 1.8 Ghz Power PC G5 with firewire 800 - another d2 disk is connected to it with firewire 400 and I have just connected a Maxtor disk using firewire 400 to that. I have tried Updated the firmware (it did require it), tested the device alone on both 800 and 400 connections both slow. Restarted everything and used disk repair to check and repair the disks - repaired permissions on the startup disk.
Connected all the devices together again | LaCie 800 - LaCie 400 - and Maxtor 400. It sends data to all the other devices fast (~ 3 min for 1.6 Gb) through the LaCie 800 disk connection!, but does not send data to the LaCie 800 fast at all. Tested the other devices alone as well - they are all fast. Have also performed a TechTool Pro Ver 4 test on the the disk (Disk type ST325082 3A 232.89 Gb LaCie d2 External LUN0 revision 3.03) Passed the surface scan, disk controller and read write tests. Is the disk failing?
Information:
G5 Tower
Mac OS X (10.4.10)
View 9 Replies
View Related
