Hardware :: Obtain Data From Possibly "dead" Lacie Hard Drive?
Nov 18, 2009
Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes... I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before. Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer. I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps. I tried plugging the hard drive into an iMac as well, but it did not show up either.
Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
I have a G5 (Late 2005) and I just bought a LaCie Quadra 500GB hard drive last week and I have it connected with Firewire 800. I was away for the weekend and left the surge protecter unplugged while I was gone. I came home today and plugged everything back in and powered up. My G5 does not recognize the LaCie Drive. It powers on and I can hear it running, but it will not mount on the desktop. I checked the cables and everything is connected.
Would anybody have any ideas for getting a user account off of a dead hard drive from a Power PC G5? I've heard alot about Disk Warrior but it's a company computer so I won't be allowed to use any software we don't currently own.I was reading freezing the hard drive would help the contraction of the materials and causes whatever is stuck to become unstuck. So I left the hard drive in my car last night in zero degree weather but it didn't help. It still doesn't mount. Any ideas even if they are crazier than putting it in the freezer .
My Mac book pro got damaged and no longer works properly. I believe that the hard drive is fine. Is there a inexpensive method of extracting the data from my intact hard drive?
I think I may have a dead pixel in my MBP. I've got the October 2008 model, the LED display. Today I noticed a little grey-ish speck in the display. And trust me, it is IN it, not ON it. Believe me, I wouldn't be wasting anyone's time if this was something that could simply be cleaned off. It is not visible when the display is off; when that area is dark, the spot is visible as a lighter grey as compared to the surrounding area; when that area is white/light, it appears as a darker grey color compared to the surrounding color. Having said all that, I have still cleaned the screen thoroughly several times but to no avail. It is visible from the boot screen (white screen with the apple) and as long as the screen is on, but again it disappears when I turn it off. From all this, I gather that it is likely a dead pixel. I have reset the PRAM and of course that didn't help. I called Apple and they agreed with me, so I went ahead and set up an appointment for the Genius Bar (almost an hour away).
I have a 13" Late 2008 Al. Macbook, and something strange just happened. I was typing in Pages, when I started to hear and feel something clicking underneath my right palm. I recognized this as the hard drive, so I immediately shut down the computer. Tried restarting and heard the clicking again, so I held down the power button and force shut it down before it fully started up. Turned it around, removed the battery for a couple of seconds, then replaced it. Started up again, and the clicking disappeared; all my files are here as they were left.
I have used the disk for a number of years - all appeared to work fine - I am now backing up my data and only get Very slow transfer speed using firewire 800 - 2 hrs to transfer 1.36 Gb. Disk is connected to a Dual 1.8 Ghz Power PC G5 with firewire 800 - another d2 disk is connected to it with firewire 400 and I have just connected a Maxtor disk using firewire 400 to that. I have tried Updated the firmware (it did require it), tested the device alone on both 800 and 400 connections both slow. Restarted everything and used disk repair to check and repair the disks - repaired permissions on the startup disk.
Connected all the devices together again | LaCie 800 - LaCie 400 - and Maxtor 400. It sends data to all the other devices fast (~ 3 min for 1.6 Gb) through the LaCie 800 disk connection!, but does not send data to the LaCie 800 fast at all. Tested the other devices alone as well - they are all fast. Have also performed a TechTool Pro Ver 4 test on the the disk (Disk type ST325082 3A 232.89 Gb LaCie d2 External LUN0 revision 3.03) Passed the surface scan, disk controller and read write tests. Is the disk failing?
I have a 13" macbook running OSX. I recently bought a 1 TB Lacie Lacinema Premier to load all my dvd's on to for when I go on trips. My issue is, that I can't figure out how to put the DVD's on the the hard drive. My computer sees the HD fine.
I am new to this forum and hoping for some advice with this hard drive issue.
I opened a brand new Lacie 500 GB Hard Drive. It is connected to my macbook via usb. I selected it as my hard drive destination in Time Machine and ran the backup option.
The hard drive did mount. About 5 minutes in the backup option failed - a time machine error: time machine backup failed.
I ejected the drive and unplugged it/turned it off and rebooted my laptop. Now the hard drive does not mount on my desktop however will show in disk utility. It lists with the Lacie name and another subdivision under the name.
When I try disk repair, erase or partition..I always get the same message: resource busy. After the error, the hard drive subdivision disappears leaving only one name on the list in disk utility. (It does not have the name underneath it).
I apologize for my semi technical description. I am new to mac and appreciate any advice on how to fix this issue. All I want to do is backup my laptop using the new hard drive with time machine.
All of a sudden my macbook pro won't recognize my Lacie hd. I changed f/w cable and plugged external hd into an older mac but the icon does not show up on either. The drive powers up when connected either mac's but still on icon. How can I get the data off of the drive?
I hooked it all up. MacBook sees the external drive. I get a Lacie set up icon on the desktop. Click it and I get password, do that and I get a bouncing arrow icon on the lower tool bar, then it goes away afte about two seconds...then nothing. This is for my MacBook Pro.
I have what I thought was an external FW HDD made by LaCie. In checking a backup log, I noticed that my supposedly LaCie HDD is actually a Hitachi drive. Does anyone know if LaCie actually manufactures any hard drives or do they just put other drives in all their enclosures?
Sorry if i posted this in the wrong section. I have a LaCie d2 Quadra 500GB hard drive that has a broken power brick (for the second time) and i'm wondering if it's possible to take out the hard drive and install it in a Mac Pro (2010, 8 Core, 2.4GHx)?
I'm on an early 2008 mac pro - used to be on a Powerbook G4. I have a 300 GB LaCie d2 Extreme external HD connected via firewire 800. Both are in 10.5.2. While on my powerbook, the drive behaved normally - fell asleep after no use, then awakened when I needed to access something. On my new mac pro, the drive behaves strangely. I only use it for backup, so it's only accessed once a day. The rest of the time I do not use it. When it's not in use, the drive sporadically wakes and sleeps. I've tried to pinpoint the cause to no avail.
I've tried all the usual suspects: browsing the forums, checking the "hard disk sleep" preference in energy saver, switching the firewire 800 cable with usb and firewire 400, watching activity monitor to see if there's a program accessing the drive (haven't found anything, but that doesn't mean it's not there). None of it works.
I have a 500 GB LaCie hard drive that I bought 11 months ago, so its still under warranty. It's formated with two partitions on it: Time Machine Backups and Storage which are both 250 GB. I also have windows installed on my mac via bootcamp and i have a program installed called MacDrive which allows me to view the contents of my mac hard drive and external hard drive.
Ok, so about a week ago, my hard drive wouldn't mount on my mac. I couldn't see it in Disk Utility or the Finder. It's not making any weird noises and sounds like its running normally, so i don't think anything is physically wrong with the hard drive. I booted up windows and plugged it in and this is what happened.
[URL]
I pressed OK and windows asked me what I'd like to do with the two partitions. I chose "Open files in folder" or whatever that option is and i can see my files, open them, and copy them, even the time machine partition. But when i go to my computer and click one of the partitions, it shows this.
[URL]
This EVEN shows on the Macintosh HD which worked fine before. So, does anyone know what the problem is? Should I try reformatting the external hard drive in windows? Should I reinstall MacDrive?
I had just purchased a Lacie 500GB xternal drive for my G5, I also have another xternal drive hooked up which is a Western Digital. I copied everything , music video files ect... onto the Lacie drive to clean up the WD drive, now when I went to clean up the new Lacie drive the files I deleted are gone but it is not freeing up any space. I went to disk utilities and re-formatted but it wiped it clean, is there such a way to delete a few files here and there and gain the space they were taking up without going this route?
Today I received my brand new LaCie grand 1TB external hard drive. So I formatted it on my vista laptop and put stuff like my documents music and videos on it as I am getting a macbook pro next week. I've gone to my mates who has an iMac this eve with my hard drive and realized as I formatted it on vista its in read only mode and i cannot edit it. I have put all the files i need on my mates leopard imac so I am happy to erase the hard drive and format it to mac.
i am using macbook air lion ox 10.7.4 and uploading my pictures in hard drive lacie last time i did this was today morning and iPhoto was up and going fine. this evening i cannot access iPhotos at all. i cannot copy it it says error 38?there is another iphoto library in the same hard drive and its functioning fine.did i lost all my pictures???
I have had a Lacie 500gb external hardrive formatted and used with time machine on my macbook pro for about two years now. I haven't had any problems until recently. When I plugged it in, it wouldn't mount. I opened disk utility and it was visible but showed as unmounted and I wasn't able to mount them manually from there.
I have a 2006 Mac Pro. An aftermarket drive I bought has now thrown up a rather serious bad block error message on my SMART utility app.I have 2 other dives but am a little sad as now I am down on a 2TB drive. (all work safe).Is there anything I can do to this drive or is it now a paper weight?
Info: Mac Pro, Mac OS X (10.7.2), 3 GHz Quad-Core Intel Xeon
I have lost all my data from my harts drive. The laptop is under warranty. I have been told that they have replaced my hard drive but could not get any data off the old one. I have now lost all my data, photos, files, music etc. NO backups, only simply because i did not know how to do them. Is there any way of getting the files back? All my work spreadsheets and accounts were also lost.
One of the internal drives on my mac pro does not show up at all - most likely, it's dead correct? I used it to store all my itunes movies.. (ATV would connect to the mac pro and the files would play from that drive)
It's a one month old seagate drive, is it normal for it to go bust just for playing media? Can I hook it up to an enclosure and try it out.. disk utility doesn't see the drive.
Luckily I backed up most of it last night.. was going to do the rest tonight.. but ugh, just my luck.
My original white Macbook just died after 3.5 years. It turns on in the sense that the white light works but there is no actual startup. I took it to the Apple store and they told me the logic board would need to be replaced. The computer itself is pretty beat up so I figure it's time for a new one. I plan on buying a Macbook Pro this week. How can I get files off of my old MacBook? The logic board is dead so I can't really do much. Any advice? Thank You. Also, there is no way I want to pay Apple $100 for their One-to-One transfer program.
I have removed the 2.5" Hard Drive from my better half's 2006 Macbook and looking at the Seagate I got to replace it the power pins don't appear to line up.
I can't see deep into where it seats. Do you have to replace the HDD with specific makes of 2.5" HDD?
MBP is not starting up or chiming - none of the resets work, been through that yesterday, not even getting to chime. I took the memory out of the MBP and it is running but having a loud bleep every few seconds. Does anyone know what this indicates? does this mean the logic board is ok but the hard drive is dead or could it still be the logic board? If this means the hard drive is dead then I could maybe buy a new one, if it means its the logic board I could recover my files from the hard drive via a hard drive enclosure.
I'm fairly new to macs and am having some problems. Here's the situation:
I've got a 3 year old 13" Macbook - 2.1 Intel Core 2 Duo, 1.83 Ghz, 512MB memory, 60 GB hard drive - I bought it from Apple directly - it was a ""reconditioned"" one from the factory.
It has worked fine for 3 years, but lately has been getting slower and slower (most programs), and even the home screen has been acting weird, and loading up funny, if at all sometimes, and I get the "spinning beachball of death" much more often and/or for longer periods. I have all my files copied elsewhere, and I just figured I would start over and reinstall the 10.4 Tiger OS that came with it - I have the original grey install/restore DVDs.
In case it matters, the two install/restore DVDs read: mac os version 10.4.8 AHT version 3AA18 disc version 1.0 22691-5967-A
So here's what I've tried so far:
-I booted up with the install/restore DVDs and have run the hardware checker several times. It says everything is fine.
-Also through the Utilities on the restore disk, i checked/repaired the disks and the "permissions" which showed up in the Disk Utility as the "Mac hard drive" or something like that, about 5 or 10 GB, and the main part of the drive, the "55.9 GB Fujitsu MHV2060BHPL". That all seemed to check out fine as far as the computer could tell me.
-I tried installing Tiger from the restore DVDs, the first time with the "archive and install" option. It seems like everything is working with the installation, and it gets through the second DVD, but when its done, it states that there are "software errors" and to try to install it again. (And no it won't boot up at all on its own...) I tried it again with another of the install options, I think it was "Erase and Install" - same thing. I also tried the "first time install option" too - same thing.
Next, since I got all my info off the computer already, I tried reformatting. First I used the function that writes zeroes over everything, for both the "Mac HD" and the "55.9 GB Fujitsu" drive too. Then I tried all three different install options again, starting with the "initial install" one. I also went into Disk Utility and used the format (and/or partition?) function and the drive has been redone with the mac os "extended journal" format, always with the same result as before. The whole thing (including the DVD test that it runs) seems to go fine with the install, but at the end it always says there are software errors and to try the install again... Is this possibly a hard drive problem (even though it "tests" fine)?
What if I ordered one of these:
Would that work in my macbook? Could I just replace the drive and go for another "first install"? Or is it likely something else?
