since last night (monday) i have opened my mac book pro up for sleeping because i never shut my computer off....well last night i opened my computer up, typed in my password and then all of a sudden my screen went black....i called apple support and got it fixed but then again it happened again to me this morning? why is this?
View 1 RepliesWhen I open MacBook Pro (in sleep mode) I see rainbow on black screen. I have to keep the power button. I have this problem only when I open (after closing) my MBP. It started after an upgrade HHD to SSD (OCZ Agility 4). SMC reset did not help. I have MBP 13 late 2011 i5 2,4. Mac OS X 10.7.4.
Info:
MacBook Pro, Mac OS X (10.7.4)
When resuming from sleep, the login screen is black. When I move the mouse, areas of the screen that the cursor hovers over will clear.
Info:
MacBook Pro, Mac OS X (10.7.3)
My macbook pro is only a month old, and I've done nothing to it besides write documents and use facebook. Every time I close the lid so the computer can "sleep" it does, but when I open the lid back up, it refuses to wake up. My friend has the same computer and automatically her screen lights up when she opens the lid from sleep. My screen will stay black up to 10 minutes sometimes. Why is this happening? Should I bring it in to Apple? Also, when I shut my computer down, starting it up is another hassel in itself. The screen goes white like it's suppose to, but only for a split second. The apple in the center never shows up, and the screen just goes black. It's very aggravating and I feel like I'm the one with the only messed up mac.
Info:MacBookPro, Mac OS X (10.7.3)
i've a macbook pro late 2013 mavericks.i have tried safe boot but still same problem.i can see notifications and the cursor only ....
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.2), script
I've got pretty old MB that was bought back in 2007, and it's been working ok up until today. All of a sudden I can not boot it, the screen stays black. Whenever I turn it on the screen flashs for ~100ms and then remains black, at the same time the sleep mode light is on and off not gredually fading in and out like when it is in sleep mode but sharply. Safe boot didn't help, PRAM reset didn't help, booting into the firmware (CMD-OPT-O-F) didn't work as the screen stays black. . I can hear hard drive working but other then that I see no signs of life (even caps lock and num lock keys don't get highlighted when I press them)
Info:
MacBook, Mac OS X (10.6)
when my macbook pro go to sleep mode and after i try to started it - I got black screen and have a loading cursor mode, If I close my macbook and after 3 minutes open - all working fine!
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
I just purchased a brand new macbook air this past week. I noticed within the first day of using that if my machine went into sleep mode, and I hit a key to take it out of sleep mode, it would go to a black screen with my cursor for about 30 seconds.
It does not do it every time but enough that it is annoying. I am coming from a mid 2011 mac air that did not have any issues. (only replaced for all day battery)
Do you think this a hardware or software issue? If i swap this mac out do you think I will just encounter the same thing?
I have read numerous posts regarding waking from sleep issues but they all seem to be affecting MacBooks purchased between 2012 and 2013.
Info:
MacBook Air, OS X Mavericks (10.9.4)
My MacBook Pro 15 inch mid 2010 model i7 processor is having problems when I close the lid and the computer goes to sleep. Heres how my problem is occouring. I close my macbook pro lid. After waiting about 10 min (my macbook sleep time) I lift the lid. Once I do this i see the screen.... for about 2 seconds and it suddenly goes black. I fix it by turning my brightness down 1 bar then turning it back up 1 bar. I dont remeber this happening on snow leopard it seems to be a lion issue and a lot of other users are having it.
Info:
MacBook Pro, Mac OS X (10.7.4), 15 Inch i7 processor Mid 2010 model
my macbook air 13 display only black screen and pointer when wake up from sleep. its not frequently happen. to become normal it take 10-15 sec, is it hardware problem or software problem?
Info:
MacBook Air, OS X Mavericks (10.9.4)
I have a 2 month old 13" MBP which I absolutely love. The only hitch is that there is an oddity when connected to my Dell 2008wfp display. It only happens when I wake the MBP from sleep. A number of things happen sometimes. Usuaully, when I wake the MBP from sleep, i get a black screen on both displays and all I can see and control is the cursor. Sometimes the main display will be black, but the MBP display will show the desktop wallpaper, but again, I can only see and control the mouse cursor. It should also be worth mentioning that the keyboard is rendered non-functional as well.
Sometimes, OS X will appear on both displays, with mouse cursor active, keyboard inactive, but I am unable to click anything or interact with anything OS X.
Anyway, I'm at the point where I need to mention this because it happens quite frequently and its getting rather annoying. The only way I can get out of this hang, is to cold reboot the machine. It happens everyday and at least 50% of the time I wake the MBP from sleep. When not connected to the display, I never get this occurrence. Also, this display worked perfectly when I used to own the classic 15" MBP, so its hard for me to pinpoint what exactly is the anomaly that is happening.
Anyone else experiencing this same issue? I am using a mini display port to DVI adapter to the Dell display.
I've noticed that when my rMBP (late 2013, Mavericks) turns off the display automatically while on battery (as configured via Energy Saver) and I try to wake it immediately, I get a black screen with the cursor, rather than my password/unlock screen. It remains a black screen, with the cursor moveable, for 5-10 seconds or so, and then the password/unlock screen will appear as usual.
This does not happen if:I don't try to wake the display/computer immediately after automatic display sleep (e.g., I wait 5-10 seconds and it's fine)I turn off the display using a hot corner and immediately wake the displayI put the computer to sleep by closing the lid and immediately wake it by opening the lidI select Sleep from the System/Apple menu and immediately wake it by pressing a key or clicking on the trackpad
Why automatic display sleep is causing this temporary black screen? I currently get around it by setting the time for automatic display sleep while on battery to 10 minutes instead of the default 3 minutes to minimize the chances of needing to immediately wake the screen. I'd like to keep it at 3 minutes if possible to maximize energy savings, but the temporary black screen is really annoying if I didn't really want display sleep and consequently have to wake immediately.
When I wake from a long sleep, my screen comes on but everything is black. If I move my mouse around, the tiles behind the pointer switch over to whatever app is open. When I invoke expose/spaces, the screen fixes itself and displays everything.
View 1 Replies View RelatedI've been experiencing a black screen with a frozen cursor (everything is basically frozen) after waking up from sleep in Windows Vista. The Mac side of things are fine, and its super annoying, because I have to do a hard reboot each time this happens. I tried google, but it appears that everyone that has a problem similar to this has a responsive computer or just needed a different driver for their graphics card. I've tried installing a different X1600 driver for this, but it didn't work. I'm on a MBP1,1 running Windows Vista SP2 (fully upgraded) with Bootcamp 3.1.
View 6 Replies View RelatedFor the past few weeks it has been going to a black screen when trying to wake it up from sleep. Either I've put it through too much work lately editing all these photos and its really tired. So, often it wakes up normally and functions fine, well, not really. It is seemingly very slow. It requires a lot of time (more than before) to open up a program or it gives me the "spinning wheel of death" when trying to go to a different page on the internet or open up a folder on my desktop. Amongst other things that require it to think. So It's just a lot slower in general than before.
View 3 Replies View RelatedIn the last 2 months or so, I have seen my MacMini 2011 OSX 10.7.3 crashing withing a minute of wakeup, after sleeps of more than 2-3 hours.
Sometimes the Black screen occurs almost immediately, sometimes it takes up to a minute after the desktop appears (after logging in). This did not occur until I got 10.7.3 and only within the last 2 months.
Info:
MacMini 2011 i5, 8GB, Radeon 6630M , Mac OS X (10.7), iPhone4; headless dual G5 via FW800
New to Mac computers. When trying to open computer after being in sleep mode, I clicked the mouse to open the password screen, & a blank blue/black screen appeared & the mouse timer( colored circle) appeared, as if to be waiting. I had to unplug the computer to reboot it. This has happened twice in 2 days.
Info:
iMac (27-inch Mid 2011)
when working on my new Imac sometimes the machine put itself in sleep mode! The screen turns black and I have to enter my password. Sometimes it happens 2 times in 1 minute; other times once in 1 hour.
View 3 Replies View RelatedI'm using an iMac (late 2011) with 10.7.3. I'm doing things on the computer or some process is going on when the screen instantly goes black (no dimming first). If a video was playing, I can still hear it playing, but pushing keys on the keyboard or mouse or pad does nothing to wake the screen. Sometimes pushing the power button a number of times will get the screen to come on, sometimes it won't. When the screen goes black, if an external drive was running and then stops, I can sometimes get the screen to come to live. Sometimes this black screen happens when I'm burning a DVD; when the DVD is finished, I can bring the screen to life. I thought one of my two external drives was bad, so I disconnected it. That seemed to help (though verifying the disk revealed no problems). But a few minutes ago, the screen instantly went black again; no dimming first. There have been times I thought this was associated with a new bit of software, but then it returns even after I delete the suspect software. Sometimes I have to use the power button to shut down the iMac then restart it. Once, I had to unplug and replug the iMac before I could get the computer to respond and the screen to return to life. I don't know if this is a hardware problem (internal or external), a software problem, or some combination...or something I haven't thought of, at all.
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.3)
I have an early 2008, 24-inch iMac. This problem started after I installed an OS X Mavericks update (and has continued). Basically, after the screen is asleep for a while, if you come back and move the mouse / tap the keyboard, the desktop never reappears. The screen stays black but the mouse cursor shows up and you can drag it around. I've seen some similar issues that said they could get the app switcher, but that never happens for me. Just mouse cursor and black screen, no matter how long you try to wait it out or tap buttons. The only solution is a cold restart, although I think in the past I was able to fix by turning off energy saver settings for putting the display to sleep. It doesn't happen every time, I'd say it happens over 50% of the time. The problem actually kicked in with one particular App Store update of Mavericks. I believe it was 10.9.3 if I recall correctly.
View 1 Replies View RelatedI have updaed to adobe reader 10.1.3 and now when I try to view .pdf's in safari or foxfire it just has a black screen. When I try to save as is says is doesn't recognize .pdf.
Info:
iMac
Only way to recover is hard restart. Just downloaded Lion two weeks ago - problem started shortly after.
Info:
MacBook Pro, Mac OS X (10.7.3)
When I try to open a pdf online, I get a black screen with the address showing at the top of the window (where it should be). I can open pdfs on my iMac with no problem. I can also open the online pdfs with FireFox without a problem. I think this started happening after I installed the latest version of Adobe Reader. I'm running 10.6.8.
Info:
iMac, Mac OS X (10.5.6)
Some of the movies in my library will not play. When they are opened the viewing screen shows black with the controller. I can move between chapters but the movie will not play.
View 1 Replies View RelatedTrying to view a pdf in a government website using safari. I get a black screen if I switch and use firefox as the web browser I get a white screen. I have no problems viewing the page on a P.C. machine it works fine.
Info:
Mac OS X (10.6.8)
Desktop restart shows flickering black/white screen, then black. Could not restart.
Info:
iPad 2, Mac OS X (10.6.6)
I came back from work to wake up my iMac. It made the noise but the screen stayed black. I tried restarting by holding the power button- I can hear it start and the chime but still have a black screen. I tried resetting the pram, and unplugging the cord but I still get a black screen. I can hear the chime though; I'm not sure if that means anything. I just had the hard drive replaced in February so I hope it's not that. just wanted to clarify that when I restart, I get the chime but the screen stays black- I don't get to the grey screen. So I'm assuming right now that my display may be shot?
Info:
iMac (20-inch Mid 2007), Mac OS X (10.5.8)
So I have a DYNEX 21 inch HD TV conected up to my MBP via the VGA connection route. My problem is that when I want a program (or more specifically in this case a game) to go into fullscreen mode it automatically goes to my primary monitor and turns the other screen black. I know I can switch the primary monitor from my actual laptop screen to the TV however I just want the game to be full screen on the TV while still having access to my dock and everything on my laptop.
View 2 Replies View RelatedI have a problem with my screen - when there is something black on, I can see a faint mark of a lighter colour. I have tried to take a picture, please excuse the poor quality. There is nothing visible when the screen is off, even under close examination. Is it less visible when lighter things are on the screen, and invisible when the screen is white.
No drops or liquid spills. Will this go away on it's own? Any fixes?
I've had my mac for about three years now and everything was working fine. After I installed lion, I notice that this started to happen. I don't lose any of my information though when it does that. It just goes into a sleep mode I guess? Anyways, is this a feature from the lion update? Something standard?
Info:
MacBook Pro, iOS 5.1
