I am waiting for a Crucial 256GB,Real SSD,C300,SATA 6GB/S to arrive along side an opti bay unit to fit a second drive in Superdrive space, Ive just found out via smart utility that my 320 7200rpm drive is failing, so my question is what is my best option for a replacement HD. 500gb should be enough, should i get a 7200 or would there be any benifit of a Seagate Momentus XT
View 3 RepliesI have a mac pro with two optical drives, I have no problems ejecting both drives in osx.
Option+Eject works fine. What is the key combo in windows?
Everything I've tried just open/closes the bottom drive. I've tried numerous searches with no results
Got a new MBP last month to replace my white MacBook - loving it as an upgrade but one gripe - if I'm sat using it on my knee I regularly hear the "click" type noise of what I imagine is the protection of the hard drive because it thinks it is being dropped.
I never heard this on my old Mac and while it's not a huge issue it is a bit disconcerting, as though I'm being told off for moving it in a fairly responsible way.
I have an aluminum unibody macbook from October 2008. I'm looking to upgrade the 160 GB hard drive inside to a 500 GB one I'm considering from Newegg. Would it be possible to migrate/copy/clone the entire contents of my current hard drive to the 500 GB one? I also have a section of my current hard drive partitioned for Bootcamp. Would this affect my ability to transfer everything over?
If this is possible at all, how can I go about doing so? If there are steps laid out somewhere, I'd appreciate a referral. Sorry if my question is a little elementary, but I did a search on these forums and also google and nothing really came up
Recently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive). After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
View 1 Replies View RelatedMacbook Pro 17" Early 2011Â
Notes. Failed HDD ASD Test.  A new hard drive was installed in September of 2011 after the previous hard drive failed. Having worked well until now the system seems to give the same problems as it had previously. I am wondering if this is a compatibility issue as others have pointed out. Â
I have been told by the technician my only option is to replace the entire hard drive again for the second time with a new one. However to my understanding a ASD test is very specific and this my not be necessary? Further I am attempting a final backup just in case. I don't have to take it in where I could just back it up myself without the system shutting down.
Info:
Mac Pro
Yesterday I bought a MacBook white and I am really happy with it.
Anyway, I have a keyboard basic question:
My native language is Spanish and I use the Spanish ISO layout in my computer keyboards; anyway, my new macbook has an English keyboard and, though I changed the keyboard layout to be used as a Spanish one, I did not find a way to enter the backslash. The other characters [including � and accented vowels are working properly].
Do you know what key combination must I press to enter the backslash?
I'm using clear speck seethru (crystal clear hard case) on my mbp. Do you think colored skins as decalgirl will work okay with it? Glossy versions will cause "watermarks"?
View 1 Replies View RelatedI have a preamp connected to the audio in/out jack on my macbook pro 13" 2012. when i plug the audio in from my preamp the sound only shows it as a headphone output and does not list it under input. i also have no button "use audio for:"
Info:MacBookPro, Mac OS X (10.7.4), macbook pro 13" 2012
I'm replacing my old 120gig hard drive with a new 320gig hard driveWhen Ive got the new hard drive installed can I just put the old hard drive in a enclosure kit/caddy and copy my music/movies/etc across to the new hard drive?Or do I have to copy the data off before I remove the old hard drive?
View 3 Replies View RelatedMacBook Pro, i am trying to send an email from Iphoto and am getting this error message, how i update the password please? The email server didn’t recognize your username/password combination.
Info:
MacBook Pro with Retina display
Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
I bought a new 500GB WD hard drive for my Late 2008 MacBook to upgrade from my 250GB drive. I have a hard drive enclosure, but I was wondering if when I install my 500GB hard drive, would I be able to use the enclosure to transfer files from my 250GB drive? I hope this was specific enough to get a clear response. If not, I'll try re-wording my question.
View 7 Replies View RelatedMy PowerBook G4 (Alum) died. I've had it for 4 years, taken it with me to Alaska and all over the lower 48, and have had nothing but happy experiences. I knew she was gonna go, but I was hoping she'd hold on until I could afford a MacBook. Alas, no. The problem appears to be the ability of the logic board to communicate with the hard drive. I can hear the HD spin, but even with Disk Warrior, I cannot locate it. The Mac Geniuses at my local Apple store confirmed this and gave me a shoulder to cry on. I've run Disk Warrior, Disk Utility, and tried finding it using the target disk mode - no luck.
The problem is that I've got 4 years of teaching materials, 6000 songs, and irreplaceable pictures on the HD, so I can't bring myself to just trash it. It's true that you only fail to back up you stuff once. This is my once. I've heard that with PC hard drives, you can just drop the old HD into a USB HD box and use it as an external HD. I can't afford professional data retrevial, and I want to give this option a try if it'll work with a Mac HD. Any ideas or suggestions?
How do i play media files from my external hard drive without transferring the files to my mac hard drive? I have a lot of media files and want to be able to play them soley from my external hard drive.Â
Info:
iMac (27-inch Mid 2011), iOS 5.1.1
My PM G5's Hard Drive has been making wierd noises lately and I'm really beginning to worry that it's failing. How can I be sure?
View 1 Replies View RelatedI know this is going to be an incredibly easy fix, but I can't find it. The Hard Drive on my new iMac is not appearing on my desktop, nor is it appearing in the "Device" menu in Finder.
if i delete files off my internal hard drive (Macintosh HD), will it still be on my external hard drive or will it just add to it?
View 1 Replies View RelatedI have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer
Info:
iMac
with cloning/copying the content one an external hard drive onto a new external hard drive. Basically, I have a 500GB FW400 drive which I use to store my media files. It's full, so I purchased a 1TB FW800 drive to replace it. Obviously, I thought I could simply copy and paste the media files from the old drive to the new one.I cannot copy the media files to my internal drive first as my internal drive is only 250GB and nearly full itself.I have used Disk Utility to attempt to close the old drive to the new drive, but keep getting "insufficient space" errors.
View 9 Replies View RelatedThere's an application that I use that performs a command whenever I type CTRL+1 no matter which application I'm in.
When I'm away, I'd like to have OS X perform that key combo every 10 minutes. How is this accomplished?
Since a few days (since the last Security Update?) I cannot make whole or part screenshots anymore with the key combinations Command-Shift-3 and Command-Shift-4. This is in OSX.5.8.
Anybody else got that prob?
Why is redo command+shift+z and not command+x? When working with a pages document, if I want to redo a few changes, you have to be super careful to hit all 3 keys at the same time or it will type a "z". If this happens then you lose all the stuff you were trying to redo! Even being careful sometimes still doesn't allow it to work right. Any way to change the redo button?
View 11 Replies View RelatedI just recently started using a Mac and I have a simple question I couldn't find over the net.How do I send the break key in Mac? For example in terminal, if I typed a long line but want to abort it, I used press Ctrl-C to cancel it in a different OS. Or if there is a console application, I press Ctrl-C to force the application to close.
I checked websites which told me to use the following:
command key + C - doesn't work
(I tried shift + command key + C, it also does not work)
alt + F3 (I pressed shift, option [for alt] and f3) - all my windows spread apart from each other
option + F3 - Expose & Spaces configuration window appears
I have a 3 year old Macbook pro which is still going strong. It's my birthday soon and I'm thinking about treating myself to a new 500 GB Hard drive. I have looked up how to upgrade it myself on iFixit.com and it looks OK but I'm just checking here to see what the general level of opinion is about difficulty / risk of buggering it up. The link to the process is here: [URL] I paid to upgrade the stock HD to a 250 GB whilst it was still under warranty but since that has expired now I don't think I have as much to lose by opening it up myself.
View 10 Replies View RelatedI want to select pictures 1-15 to put in a different folder. I'd click pic1, hold shift, then click on pic15. That selects all the files in between as well. How do I go about doing this same thing in OS X? I've tried just about every combination of the shift, control, option, and apple key with clicking but nothing works.
View 24 Replies View RelatedI read a post the other day saying how people use MTR to rip onto the HDD and then use HB to do the encoding (thus saving usage on the optical drive).
However, I don't quite get the point. I'm trying to rip the last disc of Family Guy which has two eps and then a ton of pointless extras. With HandBrake I can see which two are the eps and rip them. With MTR I jave to do all 6.5GBs and then encode - it takes ages!
Can I not preview and set up a queue in MTR?
Had a hard drive failing/failure. I am having my bad hard drive replaced with a bigger hard drive. (New Obviously) I have an iMac. (1.83GHz Intel Core 2 Duo 17-inch) To have my data transferred from the old drive will cost over a hundred bucks more. I am trying to save money but transferring it myself. All im looking to transfer is my photos. I did not have an external drive but i WILL purchse one now. My question, (to save some money) is how would i transfer my old pictures from my old drive, too my new installed hard drive. Can i use USB? Firewire?
View 2 Replies View RelatedI've just got a new external HD, but it's not being recognised by Mac OS X (10.5.7). I assumed it was because it was in a Windows format, so booted Windows, but it then turned out it wasn't formatted at all. What is the easiest way to make this an HFS+ (the Mac OS extended format), and how do I do it as I can't see it anywhere on the Mac (including Disk Utility)?
View 6 Replies View Relatedi just installed a new 2nd, (750 gb) hard drive into my g5 because my first 250gb is nearly full. I'm trying to launch logic but the file is way to big. It wont let me install this program from my new, second hard drive because the message i get is that it supposed to launch from the primary or running hard drive. Can anyone tell me how i can make my second hard drive my new primary hard drive? I got the .dmg for my leapord osx. but not the originals anymore. can anybody help me with this. i'm pretty sure it's simple, i just don't know how to do this.
View 5 Replies View Related