Hardware :: WD Elements External Hard Drive Won't Show Up When Plug In
Jul 11, 2009
What is the hard disk like inside these? Could I take the hard drive out of the enclosure and put it inside my Mac Pro? I have a friend who's WD Elements drive won't show up when she plugs it in, but I haven't seen it or messed with it first hand yet, so I don't know exactly what's going on. She says the light shows up and then goes away, and nothing else happens. If I fail to make it work through conventional means, how do I connect the drive to my Mac Pro in a way that bypasses the drives own AC Power system, which could be the faulty component?
View 1 Replies
ADVERTISEMENT
Nov 1, 2009
i just bought an external hard drive enclosure for a new hard drive but it doesn't show up when i plug it into my macbook. the enclosure lights up with a blue status light when i plug in the USB but it never shows in disk utility and finder. leopard is installed on the external hard drive (im trying to clone my macbook's hd). i'm thinking its the enclosure but are there any steps i can take to ensure i'm doing everything correctly? the external hard drive is working, it was installed in my macbook yesterday but i took it out because time machine restoring fails also, i plugged the external into my time capsule. the blue status light turns on meaning its plugged in but i only see my time capsule in the network
View 6 Replies
View Related
Dec 29, 2008
Just bought the WD Elements external Hard drive, plugged it in... and it won't mount on my G4!
-Checked all USB ports
-Doesn't show up in Disk Utility or System Profiler
View 11 Replies
View Related
Jun 27, 2014
transfer my files from my WD external drive to my MBP but to no avail. I installed them both and after that, my WD Elements wont show anymore. It was working before prior to installing MacFuse & NTFS-3G. So I tried to remove them both but still the same problem. It wont detect my WD external drive anymore. The light on my WD drive is lighted up as usual but can't be found on Finder. I also tried to remove the WD external drive from my MBP and it recognises that my WD is there! Its says did not unmount correctly, something like that. I also tried to isolate the problem using another computer, this time, Windows and it works well. Â
The Culprit of all this is when I install MacFue & NTFS-3GÂ
View 1 Replies
View Related
Dec 7, 2014
I have a problem with an external hard drive WD Elements, fails to recognize the password I entered. you have a tip on how to retrieve it? even if it leads to the formatting of HD ...
View 1 Replies
View Related
Apr 14, 2009
can plug an external hard drive into Time Capsule and access them both using Time Capsule's remote access feature (Back to my mac)?
View 4 Replies
View Related
Jan 16, 2008
when I went into the "get info" window for the G-Drive and switched the ownership/permissions dropdown from "read/write" to "no access". When I tried to switch it back to read/write, it would say read/write in the dropdown, but then I'd try to access the g-drive and I'd only get to the first set of folders--when I'd click on a folder, there would appear to be nothing in it. (Not sure if this is really related to my current problem.)
I then tried ejecting and remounting the drive, but it didn't show up on my desktop. Stupidly, I assumed my computer didn't recognize it at all and unplugged the firewire without ejecting thru disk utility. When I did this I got the device removal error.
I then plugged the firewire back in and tried repairing the disk in disk utility, but it said it didn't need repair. When I click on the G-Drive in disk utility the info at the bottom says:
Mount Point :/Volumes/G-DRIVECapacity :465.6 GB (499,973,603,328 Bytes)
Format :Mac OS ExtendedAvailable :
Owners Enabled :NoUsed :
Number of Folders :0Number of Files :0
0 Files! I'm worried about losing all my stuff! I then tried DiskWarrior (v4.0). When I first opened it I think the info at the bottom said "This disk is a Mac OS Extended disk. This disk does NOT appear on the desktop." I'm not quite sure about that "not" b/c after rebuilding the directory of the G-DRIVE I know it now says "This disk does appear on the desktop." Anyway, it's definitely not appearing on my desktop. After building the directory it said "All file and folder data was easily located. Comparison of the original and replacement directories indicate that there will be changes to the number, the contents and/or the attributes of the files and folders." And later: "19 files (and 2 folders) had a directory entry w/ an incorrect text encoding value that was repaired." And:
Disk Info:
Files: 51,646
Folders: 18, 493
Free Space: 65.42GB
(etc)
I then clicked "Replace" whereupon it said it was successfully replace. But still it did not appear on the desktop even after ejecting, remounting, rebooting computer, etc.
If anyone has any advice I'd really appreciate it. I'm pretty desperate here! Thanks!
(FYI I already tried going into the Finder permissions and unclicking and reclicking the box for showing disks on the desktop. Also, I plan on getting DataRescueII in case that's necessary, but i hope it isn't)
View 7 Replies
View Related
Jun 9, 2010
A few months ago my HP tablet pc just died on me, so that's when I decided to get a Mac.
Although, I needed to transfer the data and since my HP computer wouldn't get to the login screen; I was told to take out the hard drive, put it in an enclosure, and hook it up to my Macbook Pro.
I finally got around to getting an enclosure and hooked everything up. Now when I connected the hard drive to the Mac, it wouldn't show up on my desktop.
I did some searching around the internet, and there was some suggestions about the hard drive not being a "master" and I had to take out a plastic thing called a "jumper." The HP hard drive didn't have a jumper, so now I'm stumped on what to do next.
The hard drive enclosure I purchased was a 2.5" Rocketfish SATA HD Enclosure. aka; model RF-AHD25
I DID install Mac Fuse. Just not the driver needed to write on the hard drive, since I wasn't gonna write on it.
View 5 Replies
View Related
Oct 17, 2010
I have an old external hard drive (5yrs) that I used on a G4. I tried to plug it into my 10.5.8 and it will not register. I tried it on 3 different computers. I am tiring to use it for work (school teacher). I have an older Mac at work that it did show up on so I can get the info off.
View 1 Replies
View Related
Jul 1, 2009
My Externam Hard Drive is not showing on my desk top. It is connected by the usb cord. It is a brand new la Cie 250 GB.
View 3 Replies
View Related
Mar 20, 2012
I threw my external hard drive out of the Spotlight Privacy menu by accident, and now I can't get it to show anywhere. What do I do?
Info:
MacBook Pro, Mac OS X (10.6.8)
View 3 Replies
View Related
Dec 19, 2007
My Maxtor 500 external hard drive has suddenly stopped appearing on my desktop. My other external drives appear. I've tried hooking the drive to my MacBook Pro with the same results. The drive however, seems 'active'. The light on the front of the drive does its usual flashing routine when plugged into a new machine. I've never had a crashed drive before. Does it sound like this is what has happened, or does anyone have a clue as to what I should do?
Information:
G5
Mac OS X (10.5.1)
MacBook Pro
View 6 Replies
View Related
Feb 20, 2012
My external hard drive doesn't show up in finder.Time machine can't find it. Does this mean my external hard drive is dead?
I borrowed a friends and switched mine with hers. My acted the same way in her macbook. I switched the cords on the external drives, no change.
Also, Is there a way to retrieve the information from my sick external hard drive?
Info:
MacBook, Mac OS X (10.6.8)
View 1 Replies
View Related
Mar 24, 2012
can i make a slide show of my photos in external hard drive without import it
View 1 Replies
View Related
Apr 14, 2012
I am, I hope, at the end of a 36+ hour formatting process with this WD Elements 3TB external drive. I decided to zero out the drive and when I went to bed last night at around 12am, there were about 6 hours left in the process. This morning at aroud 9am I went to check on the drive, expecting it to be ready to go, but I found it writing a temporary file. The progress bar is about 90% done. Is this part of the normal zeroing out process? If so, how long should this take? If this ISN'T part of the normal process, what should I do?Â
Info:
Mac Mini 2 GHz intel Core 2 Duo, 4GB 1067 MHz DDR3, Mac OS X (10.6.4), 512 MB DDR SDRAM
View 2 Replies
View Related
Feb 19, 2009
Odd stufff, I have a 500 gig Lacie ext HD that my user uses on her Vista machine...
I am setting up a replacement for the Vi$ta machine, which is a 24 inch imac.
I plugged in the ext HD and nothing happened after I powered on the ext HD.
I checked disk utility and it showed up but as a 2TB size ext HD...
I unplugged the Lacie and plugged it back in and all the info showed up correctly.
But ALL the buttons under "First Aid" are greyed out so I cant verify permissions, disk, or repair disk or permissions.
Information:
imac 24 inch
Mac OS X (10.5.8)
View 2 Replies
View Related
Mar 9, 2012
I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer
Info:
iMac
View 7 Replies
View Related
Jan 17, 2009
I'm getting kernel panics every time I plug in an external drive. This is happening on a MacBook Pro as well as on a Mac Mini (G4). Both are running 10.5.6.
The drive is one of the Seagate Barracuda 1.5 TB drives that are having all sorts of other problems. I have it in a CoolMax USB 2.0 enclosure (this one: [URL] I've been using this setup for a couple of weeks and didn't have any problems until this morning when I consistently get this kernel panic.
Obviously I can't run Disk Utility on it, unless there's a way to plug it in without it automounting. I could boot my MBP to XP, but the drive has two partitions and both are HFS+. Ideally I would like to preserve the data on the drive. They're only backups, but I don't have access to the originals at the moment, as my main machine is out of commission. Lots of hardware problems lately.
Any ideas?
View 9 Replies
View Related
Dec 3, 2007
I get unexpected problems with a dual 1.8 G5 (2 GB RAM, 2 disks inside, both 320 GB). In fact, the machine seems to break any hard drive I plug in it (via USB, eSata or internal HD). The internal hard drive hosting the system is clicking every five minutes or so, and two external hard drives are now mostly unsable (they unexpectedly unmount when copying, or they just don't mount at all). I checked them all with DiskWarrior. Some times, they can be repaired, sometimes not.
The problems appear with Tiger and Leopard as well. I lost Time Machine backups form an external hard drive (Seagate 320GB, got "keys out of order" error message in DiskUtility). The other external HD I have to put my photos (750 GB Seagate) can be used in both eSATA via Lacie PCI card and USB. Both USB and eSATA fail unexpectedly (unmount while copying) and everytime the hard drives seems to fail more and more everytime I try to use them.
I used Apple products since years '80 (SE30) and did not have problems whatsoever with previous machine and my actual macbook Pro. This G5 is getting me crazy, and I don't want to put hundreds of dollars repairing since it is worth less than 800$ actually... Is it the power supply, the logic board, a problem with electric voltage up and down? I always found solutions to problems but now, it is the first time I don't see the light... I feel like everytime I plug a hard drive in this G5, I play with fire and may loose my backups and archives!
View 3 Replies
View Related
Jun 12, 2010
I was wondering if there was a way to use the iPhone's audio jack as an external jack for the macbook pro via USB or so, as i own the 13 inch model, that only offers one jack.
I want to use garage band just trying out a bit and i'd need an extra jack for the headphones, otherwise the microphone will record what's played over the internal speakers.
EDIT: I forgot to say that I already tried things like AirPhones, meaning wireless stream to iphone. But there's unfortunately few moments of latency, so i hardly can use it for recording.
View 1 Replies
View Related
Nov 12, 2009
if i delete files off my internal hard drive (Macintosh HD), will it still be on my external hard drive or will it just add to it?
View 1 Replies
View Related
Jun 30, 2008
I am trying to download MAC OSX 10.5 that I just purchased and my hard drive on the computer won't show up as a destination drive to download the software on. I erased the disk figuring that would help but it did not. The computer is a PowerMac G5 1.8 mhz, 1GB RAM, 160MB HD.
View 1 Replies
View Related
Jun 22, 2012
I have three external harddrives all of which are connected through different ports, all show up in finder, all show up in disk utility, but none of them will show up on my desktop. I looked at a few other posts similar to mine but the answers given to other problems have not worked. There is no way all three of my cords are causing a connection problem and I have repaired and verifyd all the drives and still nothing.
Info:
iMac, Mac OS X (10.7.4)
View 4 Replies
View Related
Sep 15, 2009
My external drive has been used once. It was formatted, partitioned and files were saved on a mac. It showed up on a friends computer running Linux, and it showed up on my PC at home, but it hasn't been turned on since (about two weeks). This is where the problems begin. A few days ago I purchased a new enclosure for my HD (Nexstar 3.5). I took the HD out of it's old enclosure and put it in the new one (I needed the new enclosure for school purposes). I got to school today and plugged it in to the mac, but the drive didn't show up on the desktop. I tried to connect with Firewire 400, 800 and USB 2.0 but no luck with any of them (a USB key worked fine). Just to make sure it was working, I got home plugged it in to my PC and it showed up instantly.
From looking at other threads regarding this issue they all say I have to access the Utility menu. The only problem is since the mac I need to use is a school computer I can't access the Utility menu. It says I don't have authorization to use that menu, and won't allow me to go any further.
I don't know what to do from here. I can't reformat the drive because there is rather important info on there that hasn't been backed up yet. What can I do?
View 11 Replies
View Related
Oct 14, 2009
with cloning/copying the content one an external hard drive onto a new external hard drive. Basically, I have a 500GB FW400 drive which I use to store my media files. It's full, so I purchased a 1TB FW800 drive to replace it. Obviously, I thought I could simply copy and paste the media files from the old drive to the new one.I cannot copy the media files to my internal drive first as my internal drive is only 250GB and nearly full itself.I have used Disk Utility to attempt to close the old drive to the new drive, but keep getting "insufficient space" errors.
View 9 Replies
View Related
Mar 31, 2012
Recently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive). After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
View 1 Replies
View Related
May 13, 2010
I have a Lacie Porsche 160 gb firewire drive, it worked well, I ve had it a couple of years. Now when I plug it in it won't show the disk image on the desktop. system profiler finds it and I have the Lacie upgrade tool and that checks it and says it is up to date. I have tried it on two other macbooks one older, one newer all Leopards, and one imac desktop. They all found it. so it appears to be a problem with my laptop only.
I did use it with time machine but it ran out of space, Using another laptop I have deleted all lot of stuff off it and tried changing its name.
View 6 Replies
View Related
May 15, 2012
Actually all video content in Safari.Videos appear as blank in Chrome.Everything operates normally in Firefox.I've uninstalled and re-installed Flash.Cleared all browsing data both Safari/Chrome Checked DNS settings re-started zapped PRAM selected open in 32 bit mode for Safari attempted to turn off hardware accleration via settings I can't access deleted preferences unistalled and re-installed Chrome, re-installed Safari.
Info:Mac Pro, Mac OS X (10.7.4), 3.2 Quad Xeon, 12G Ram
View 11 Replies
View Related
May 20, 2008
I have an old G5 I'm getting ready to sell so I wanted to format the hard drive. I went to disk utility, went through the process of erasing the disk, and then I did the thing that writes zeros over everything on your hard drive for just a fully clean formatting...
Moving on now to install Leopard (I tried Tiger too), when I get to "Select Destination to install Mac OS X", my hard drive won't show up at all. When I go to disk utility or startup disk, it only shows the Leopard disc that's in the computer at the moment. Doesn't show Mac HD or the volume or anything whatesoever...
I feel like at this point only something can be done from the Terminal, Everything I found people could still at least click on their HD in the disk until...
View 4 Replies
View Related
Jun 9, 2012
How can I make the Hard Drive icon appear on my desktop?
Info:MacBook Pro (13-inch Mid 2010), Mac OS X (10.6.8)
View 1 Replies
View Related
