I have a non-jmicron e-sata express card, [URL]
on snowleopard- which means it's non bootable, but it works- yet i was wondering if the drivers were installed right- if i right click on the card icon in the finder it reads Silicon Image and Sil 3132 SATA Link controler.
I have an eSATA drive that was formatted on Windows using Bootcamp. It is connected via an Express Card. I want to now format it for OSX. But when I boot to OSX I don't even see the drive. Is there something I have to do to enable the Express Card?
View 4 Replies View RelatedI have the new 15 in MBP and bought a e-sata express card from OWC which is the Apiotek Extreme Dual e-sata [URL]. At first it could not be seen so I went to there site and downloaded the driver for it and got several grey screens of death kernel panics. I know the Sonnet Tempo SATA Pro ExpressCard/34 is supposed to work on the new unibody but after all that I bought to get this system up to the speed I need, was trying to avoid another 280 dollars and want another 4gb Ram chip more. [URL]. I am only running one external drive like this for PS scratch, OS backup and a working drive that is partitioned in 3 sections. Wondering if there is another express card that is working in the new 15 in 2.93 without any issues.
View 24 Replies View RelatedSince upgrading to 10.5.8, my external WD My Book connected to the MacBook Pro (circa 2006) via a Best Connection JMicron-based express eSATA card has stopped being recognized and listed in the Finder upon boot up.
1) Has any one else had the same experience?
2) How does one remedy the problem?
3) Is it possible to revert back to OS 10.5.7?
I'm new to Mac and loving it so far. I've been using Windows Vista Ultimate 64 bit for graphic and web design the past several years until I just couldn't take it any longer. Trouble is I had all my client files on an external Seagate hard drive with only an eSATA connection on the device (which I connected to my PC with the included eSATA PCI card.
But apparently my new Mac Pro will only accept PCI-express cards, and I'm having a hard time finding a PCI-express eSATA card that supports a 64 bit OS (I'm using Snow Leopard).
I was wondering if there was any improvements choosing an Express Card to eSata over using Firewire 800?
This card states a transfer rate on the card up to 300 mbps which is nowhere near the 800 mbps that Fw800 will give?
The past few months I've made threads asking about eSata express cards and external storage and have received useful information. However, I've always neglected to ask this obvious and direct question. I've been recommended a few cards, one from OWC always comes up. But I never bothered to ask about "dual" versions because I thought I'd be able to find it on my own.
After weeks of casually looking around I wasted a few hours yesterday hard core searching online. I really need a storage solution for my exploding cache of photos and video that's been stockpiling and needs editing.
Perhaps FW800 or another interface could be a better solutions. But when I choose my new MBP 17" a few months ago I specifically kept the fact it retained the express card slot in mind because of it's higher transfer rates.
I'd get 1 TB but I'm thinking realistically I need 2+ TB of storage... and also I think I need to finally get my rear in gear about redundancy. I use Time Machine with an external FW400 HDD and back up my music separately there too but want to keep in mind future space should have redundancy in mind.
I have a MBP 2.66 GHz Intel Core i7 and have tryed to connect a Lacie Thunderbolt eSATA Hub to the Thunderbolt port.
1 Will it work with the Thunderbolt Display port?
2/ Why won't it see and Thunderbolt devices in the Systems Report?
Info:
MacBook Pro, Mac OS X (10.7.3)
So I got this eSATA card for my MacPro a while back and was able to install quite easily. I've done a fresh install on a new harddrive of my OS and no longer have the driver disc for the eSATA card. Does anyone know a method for ripping the drivers from my old hard drive? Or does anyone know where I can actually get the driver? I can't seem to locate it anywhere on Iomega's site.
View 4 Replies View RelatedI installed a Dynex eSATA pci-e card into my Mac Pro. When i attempt to shut down, it never works, it hangs up with a blank screen and the wheel going round and round forever. Also, If I try to start up with an eSATA external drive on, it will never fully start up-just hangs up again. It will work if I plug the eSATA cable in after booting, then turn on the external drive, and likewise, eject it and power off before shutting down. I really do not want to have to go through this every time I start up / shut down.
View 1 Replies View RelatedJust got the new Newertech 6G ESATA card from OWC and I'm having problems getting my ESATA cable fitting into it. It does not go in very far, and never latches on to the two tabs. Before I go out and buy a new cable or return the card, please take a look at the two pics and tell me what's wrong. I'm afraid to try to force the cable in harder since it doesn't seem normal that there should be so much resistance.
EDIT: Jammed it in real hard and it seems to have seated itself, but the drive is not showing on the desktop or in Disk Utility. Mac Pro recognizes the card just fine (slot 4). Will try another cable, but something feels wrong about the card. It shouldn't take this much force to plug the cable in.
I bought a USB2 + eSATA docking station for my Nehalem MP. The docking station works perfectly well using the USB2 port, but I just can't get the eSATA card to work.I have a cheap sil3231 card, I'm using siliconimage's latest OS X drivers, with a single drive (so no RAID), and it won't mount. I played around with the jumpers, nothing. Can anyone think of something I missed?
View 13 Replies View RelatedI was told to buy one of these [URL:...] because it is supposedly better than USB2/FW for external DVD burning.
1) Is that true?
2) What else could I use the eSATA port for?
3) Is there a better PCIe card I should consider for other purposes down the road?
I've got a 2008 Mac Pro with 4 internal hard drives that are in a 0+1 software raid. Unfortunately, this prevents me from using Boot camp on any of these drives.
I'm curious, is there a PCIe card that adds eSata ports that would allow me to put Windows XP on an external enclosure that is bootable?
I've been scouring the message boards and forums and have found cards by CalDigit, FirmTek and Sonnet, but I have no idea if any of these will support with Boot Camp/Windows.
I'm not interested in using the on mobo SATA ports because A) they aren't recognized in Windows, and B) I don't want to put a drive up in the CD drive bays (because of the bad airflow).
I have a late 2008 12" MacBook with a FireWire 400 slot (only). I am hooking up an 8TB Raid hard drive to it for digitizing, backup and editing on FCP 6 and would like to have a higher speed available than the laptop's FireWire 400 provides. Is there a way to augment/build out the MacBook to utilize either a FireWire 800 slot or an eSATA EC2 card? I don't think this version of the MacBook (MacBook4,1) has a PCI or PCIe card slot. Although I believe it may have a mini-PCIe card somewhere, as the last page of the Users Guide says (under Europe—EU Declaration of Conformity):
"Hereby, Apple Inc. declares that this 802.11a/b/g/n Mini-PCIe card is in compliance with the R&TTE Directive."
Info:
MacBook, Mac OS X (10.5.8), 2.4 GHz Intel Core 2 Dup
My buddy and I just finished swapping the airport card for a mini pci-e sata card in his 2008 Imac and all is well. Unfortunately, we could not get it to show or mount anywhere on mine (2010). We tried everything. We loaded the raid drivers and the none raid. We tried both cards (his and mine) in my machine and still nothing. His Imac mounted his ssd immediately after installing the drivers. Could it be that the new logic boards do not support this type of card? Is there a special driver that I need for the i7? I was hoping this would add 2 more sata ports.
View 4 Replies View RelatedTwo questions, wondering if anyone knows the answer:1.Looking for maximum bandwidth of ExpressCard/34 slot in MacBook Pro(Since eSATA raid is supported with ExpressCard, the bandwidth should be there. Looks like it has at least 70MB read/write?)2. Are there ExpressCard/34 SSD disks that runs faster than internal SATA drives? (Mtron seems to make only 2.5" and 3.5")
View 24 Replies View RelatedI just installed a second eSATA card to my system. The connected drives mount very slowly (long delay) and eject even more slowly (more than 2 minutes, sometimes hang, sometime kernel panic).
View 14 Replies View RelatedJust realized that all the firewire ports on my 8-Core Mac Pro share the same bus. I need to capture video from a HDV camera to a firewire hard drives and I get hickups and slow downs that cause dropped frames. Can anybody share any links to what FW card to get to and where I can buy it from? Anything that does not cost to much? Please only post links of cards you have used or read good reviews using it on a Mac Pro. Also what slot would I put the card in? I want to make sure the slot is not also sharing a bus with something else.
View 7 Replies View RelatedLast month, my mac pro stopped working. I can still hear the chime but nothing loads in the scree. So i brought it to a service center and they told me it's problem with the video card and that I have to pay 500 dollars for that. I am hesitant to shell out that big amount of a cash. Been using the Mac for 3 years now. the video card is nvidia p435(says on the sticker) which i think is a 7300 gt. My question is, can I use PC video cards for this cause I find the similarity. Since it's PCI-e then it should fit and work. My only concern is if they is a special driver that needs to be installed.
View 4 Replies View RelatedBack in my PC days, I used to have to manually update my video card drivers ALOT due to the many games I played on it. I know that Apple has the update software feature, but I never seem to see any video card drivers for the 9400/9600 chip. Can I update this manually from the Nvidia site? Or trust that Apple will update drivers when they feel the need. BTW, I'm not having video issues on the OS X, but just wondering.
View 1 Replies View RelatedI'm trying to update my video card drivers on my 13" MBP. It seems as if I am getting a nv4_disp.dll error on the XP partition of my hard drive when I try to exit BF2. Could anyone suggest good graphics drivers to download? I tried Omega drivers but they said that my graphics card could not be recognized.
[URL]
2x EDIT: I'm getting this error whether the NVidia drivers are installed or not. Similar error with the Omega drivers. What shall I do? This screen has the Boot Camp NVidia drivers installed, I've tried it with them uninstalled as well. Sorry for repeating myself but I want to get that point across. These are the drivers from the Apple link.
I just installed Windows 7 on my bootcamp. I put in the Snow Leopard in to install the drivers but it didn't install the airport card. I checked device manager> network adapters and the airport card is not there. Does anyone know where I can download the drivers for the airport card?
View 8 Replies View Relatedmore USB 2.0 ports for my Mac Pro (early 2008). Which one should I get? at's the difference between PCI and PCI Express? I had added a USB PCI card in my G4
View 19 Replies View RelatedI was wondering if there are people out there buying or bought the 17" Macbook Pro for the ExpressCard/34? If so, what ExpressCard are you using and have you used it in the new MBP yet? I would like to know its performance with eSATA, firewire, and SSD expresscards
View 24 Replies View RelatedI think my video card died about a month ago and I've been trying out some cards with no success. Here is a previous thread I made about it:
[URL]
I just got the second card I'm trying today: ATI X800 XT AGP, and my computer will just sit at the grey apple screen with no wheel spinning. I'm assuming this is a driver issue (or something much worse)! Since my computer will not boot, I have no idea how to update the drivers for this card.
I am trying to make a card and we don't like the color palate in the background. I would like a template for just the card (basically just the fold in the paper) so I can make my own background color palate.
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.5)
i really need to download drivers for huawei ec321 data card but am finding it very hard
View 1 Replies View RelatedAnyone has any insight on either SD card slot to Express Adapters? Or if there are any Firewire to Express card adapters??
I'm considering buying a new 15" Macbook Pro and unfortunately, they don't come with Express card slots, only SD slots.
Is there any firewire to express card reader / adapters....OR SD card slot to Express Card slot adapters available?
I bought an Express card from here: [URL] I connected an eSATA drive to it. I don't see the drive in Finder and I suspect I need to format it first. But I don't see an equivalent to the Windows Disk Manager. How do I format the new external drive?
View 4 Replies View Related
