I just got a new 13" MBP. I noticed that there is slight vibration on the right palm rest. I know that the hard disk is located under there but is this normal? Do any of you 13" MBP owners with stock 5400rpm drive feel the subtle vibration in your MBPs?
View 19 Replies
I know it might be nothing, but just thought I'd make sure. I've been using an Aluminum Macbook for a few months, and it's been working super great, well, until yesterday, I'm not even sure if it's been this way the whole time, but it's been driving me nuts since this morning. The problem is, I've been feeling a little vibration around the entire trackpad area, especially on the right side, it's probably coming from the HDD (Factory drive 160GB), but I really don't like it. It's nothing noticeable, I mean you can't tell the difference until I've told you about it or unless you've been resting your hands on it for a while, but the point is, it does exist. Now my question is- is it normal? Was it there the whole time? If it's not normal, should I be taking it to the store? I've never even opened up the bottom, ever, it's been as it was on day 1. I tried listening to it carefully while giving it a little shake but nothing seem to out of place in there, it still feels as solid as new, but the bottom line is, I'm going crazy. What should I do?
P.S. It's got nothing to do with electricity cuz the vibration remains when I run it on battery.
first time post here and a noob question. I've had my MBP 2.4 i5 since early June and I noted a noticeable vibration. I'm not quite sure if it's the fan working or the HDD spinning. istat shows my fan running at 2000 on average both left and right, GPU and CPU temp around 38 on normal operation such as browsing on safari. The reason I asked is because my older MBP 2.16 C2D (3 years old) seem to not have this issue or characteristic. I would even notice the vibration with my hand resting on the desk the new MBP sits in. This happens even with waking-up the MBP from cold sleep. As stated, no intense app or tasks are involved, just plain browsing thru safari.
View 6 Replies View RelatedI was wondering if any of you with the New Aluminum Macbooks feel any sort of vibrations from the hdd, or the fans. Especially, do you feel it near the trackpad, on the lower half of the computer?
View 24 Replies View RelatedWhat I want to know is that if I replace my 160 GB 5400 RMP HDD with a 7200 RPM 500 GB HDD in my MacBook Pro 13' the noise level and vibration become much stronger ?
View 16 Replies View Relatedi just find that my Usb port is moving. when there is Usb inserted.. is that normal?
View 8 Replies View RelatedI recently changed the stock Hitachi 250 GB 5400 rpm drive to WD 500 GB Scorpio black 7200 rpm drive.
Now it was perfectly fine, no vibration or noise, just like the previous one. However now about a week past, I can feel it vibrating and that equals to the vibrations i get when I put a cd into my drive. It is kind of annoying. IS this normal? I know the drive is faster in RPM but as WD said it equals to 5400 by noise and vibrations and it was fine just a week back. (BTW Im running on a battery).
There is one thing though that bothers my mind, when I changed the drive, there were those 4 mounting screws which I didnt have screwdriver for. I took it from my friend but I think I did not screw one of the mounting screws to the very end. Can that be a reason?
Just received the new Macbook Pro 17" with I7 option as well as the 7200rpm HD 500gb. The machine works great so far. However, there is a slight vibration I can feel on the aluminum in front of the keyboard and basically across the machine, though when I moved it from a glass table to a wooden desk it was much decreased. The machine is also much noisier than I thought it would be, though I did know when I went for the 7200 option that it might be noisier.
Is this normal because of the HD or I7 chip? I can return the machine and exchange it, but the anti-glare screen seems ok with no pixel problems, etc., so I don't want to look for trouble without a benefit.
Is it possible this is not the HD? (vibration and noise does seem to emanate from the left side-I believe it is a Seagate, ID starts with ST)
I have the new 2.4 aluminum macbook and today for the first time I started burning cds and I noticed the whole computer vibrates pretty strongly. Is that normal? Also if i pick up the macbook and move it slightly while its burning it makes a weird noise. Is that normal also?
View 3 Replies View RelatedDoes anyone experience a LOT of very noisy vibration when using the CD/DVD drive? I'm running a presentation off of it, and every time it spools up to read more info, it's got a lot of extremely loud vibration. Using this support article, I notice a HUGE difference:
[URL]
I am a proud owner of an Apple Macbook Pro 15 inch since Feb 2009. I am a converted user from PC to MAC and preach the benefits of Apple OS X et al to colleagues, friends and family. This morning I noticed some slight peeling on the bottom right side (near trackpad) of my Macbook Pro. At first I did not realise what it was, I thought it might be some surface marking / dust. I wiped the area with a dry cloth at which point a small part of the surface came away. Here is a link showing images that I have just taken. Need some constructive advice from the forum on what to do?
View 24 Replies View RelatedWhen the Macbook Pro is charging, I can feel a little electricity in my fingertips. Unfotunately, I don't have a three prong outlet, just two. Either way, I think this was not supposed to be.
Info:
MacBook Pro, Mac OS X (10.7.4), Aluminum Unibody 2009
its a 500gb @ 7200rpm just installed it and runs great some ppl complained of vibration and noise from the HD but i have NONE of those complains its super fast and quiet the installation was very easy and after installation i put in the SL dvd and restored from previous backup on my time machine, and it was like i never switched HDs.
View 12 Replies View RelatedAround 2 months ago, the local AASP techs, working together with Apple Asia techs, finally agreed to replace the top case, fans, and superdrive of my uMBP. At that time, neither the tech nor myself could detect any vibration on the uMBP keyboard, and I took my uMBP home satisfied. After a month, I thought I was beginning to feel some vibration on the TAB key, but it was so slight I dismissed it as something psychological, perhaps even trauma from the previous episode which lasted for weeks. Now it's back with a vengeance. I treat my uMBP with kid gloves. I clean its whole surface every week.
I rarely take it anywhere. I've never bumped or dropped it. I've even bought an external keyboard and mouse so that I won't wear its keyboard and trackpad. In fact, I've even restricted my use of the 9600 graphics chip, preferring to use the 9400 as much as possible to avoid taxing the fans. I mean, if some/most keys were vibrating, then I could say that it could be a loose/poorly positioned keyboard/fan(s), but if it's only the bloody TAB key. I've gone through three fan changes and one top case replacement after all.
[URL]. It says that it is normal for it to get warm on the bottom... but mine gets beyond warm... it get's really hot. Does anyone else notice this? Also, when I have it on my computer, the vibration is noticeably louder. It gets really irritating because it sounds like it's echoing through your ear.
View 21 Replies View RelatedI noticed from the start that there is a noticeable noise to it, not loud. But noticeable. I can feel some vibration under both my hands when typing. I have used one of my friends white mabcbook and this does not have any such noise to it. I did opt for the 7200 RPM HD and now my question is is the sound coming from the HD or the fans? The sound has been on constantly since I first turned it on. Downloaded SMC Fancontrol and it's showing 2000 RPM on both fans, but that's normal isn't it?So is there anything I can do? Is this normal or did I get unlucky?
View 2 Replies View RelatedWhat harm could be caused when slamming hands or fists against the table ur macbook pro is sitting on. Can the tremors/rumble cause any internal harm? Like loosening of hardware pieces or anything?
View 5 Replies View RelatedEverything is perfect except a white back light bleeding in a form of a line from above 3-4 inches from the bottom of the screen. Its only visible in solid black background.
View 24 Replies View RelatedI am not sure if it only my macbook, but I notice a slight performance drop when I run on the battery v the AC. I notice that my application load slower, folders open slower and expose and spaces response is also slow as well.
View 7 Replies View RelatedI bought this computer (Macbook Aluminum 2.4 GHz - currently running Snow Leopard) last October - my warranty ends Oct. 16th. Anyways, I put a disc in the drive earlier today, and the computer took it right away. That was unusual because half the time it doesn't wanna take the disc (someone at the genius bar assured me all of these Aluminum Macbooks are this way). So continuing with my story, I took the disc out when I was done and I heard slight clicking noises coming from the side where you put discs in. I closed the computer because I thought it would stop it, reopened it, and it was still doing it. So then I restarted it, and I didn't hear it. Now I'm hearing it every so often.
View 4 Replies View RelatedI just got my first mac and its a MacBook Pro 15" i7 HR-AG and wanted to protect it and so I purchased a Zagg Invisishield for it. I also paid $20 for the installation ontop of the purchase to get it professionally installed...as I was looking into the details I noticed that the pieces are not properly cut out for the MBP 15" and are off leaving the edges unprotected from scratches. Disappointing because the edges will be most prone to scratches. Here are some pictures of my New MBP and Zagg Invisishield installed....
Also Zagg Invisishield owners is your cut out a little off too or did I end up with a bad one?
Today I just noticed that my MBP makes a very slight sound once in a while. I'm thinking it's just the hard drive working slightly harder. Is this normal?
View 14 Replies View RelatedMy brand new MBP 13" vibrates.
It is a subtle kind of vibration, notable only as a ticklish sensation on your palms when resting them on the case, rather than a concrete, strong up and down shaking.
I wouldn't even mind, if my wooden desk didn't pick up the vibration, acting as a soundbox with an audible, deep humming noise. You probably need good ears to hear it, I only do in a quiet room (like, my home desk...). After a short while, the deep humming is joined by a subtle higher-pitched humming. This is when there is absolutely no activity (no programs running, just an empty desktop). I am definitely not talking about the higher fan speeds accompanying increased processor activity and heat.
Now I heard multiple reports of MBPs doing this, but never found an objective conclusion: Is that something MBPs simply do (it's still better than most laptops)? Should I, *sigh*, return the damn thing?
In other words: Is there someone who could confirm that he or she has a 2009 MBP 13" (standard hardware load, cheapest of the unibodies) that has no vibrations whatsoever? Please note that it's subtle and I only noticed it after a while (but now can't stop thinking about it).
I have a 28" inch display attached to newest version of Air. Works ok except when I have a full screen on plain dark grey background, then I see a waviness or flickering effect. Like the dark grey in Iphoto background. Other than this, the other colors seems ok. Pictures are fine, even when dark. Maybe there's a slight flickering with dark blue. Any explanations for this.
using mini display port to dvi. Tried with a friends dual link display, was a little different, but still unstable looking in dark grey when it fills the screen.
Could it be just what it takes to make this color, or the Hertz, which is 60. Other than this, no problem with the screen.
I received my 15" MacBook Pro 3 days ago and tonight I happened to notice a slight click noise when i open or close the lid. It sounds like it is coming from the hinge area.
View 5 Replies View RelatedI'm starting to feel vibrations and some kind of "staticky" sound when I play any videos or music near or at loudest volume. Could it be possibly due to a loose screw? I noticed that on the bottom of my notebook, one screw seems to be slightly looser than the others.
View 3 Replies View RelatedI just bought a refurbished Macbook Pro and after less than a week, I've just started detecting a sort of soft clicking noise when my palms make soft contact with the area near the trackpad. It's not the trackpad clicking, which is a distinct noise.
Info:
MacBook Pro (Retina, Mid 2012), OS X Mavericks (10.9.3)
I am contemplating upgrading my stock 250GB drive in my 13" uMBP(June 2009) with a 320GB 7200rpm WD Scorpio Black:
[URL]
I was reading and some users have experienced unbearable vibration and increased noise, while some have not. I would live to be able to increase my HD speed, and am too poor for an SSD at the moment.
What are some experiences people have had with putting a 7200rpm in a 13" uMBP and would you recommend the upgrade?
A couple days ago I upgraded my mid 2010 MBP 13 stock hdd(Hitachi 5400rpm 250gb) to a new one (Hitachi 7200rpm 500gb 7k500). I am still amazed by how much faster and more responsive system has gone.
Some change in noise/vibration was expected, but now I am starting to get a bit annoyed by vibration and HDD noise.
Vibration gets on my nerves- the levels are nowhere high, but there was no vibration in my stock HDD. In addition, the noise of the system on idle has roughly doubled- both fan and HDD are humming at the same level.
The system is still very quiet, but I could not help noticing it anyway. Is this normal?
I tried replacing the old HDD and found out that the problems were not present with it (=I am not likely to have made some awful mistakes putting the hard drive in).
Then I tried tightening all the screws as hard as possible and putting some rubberized washers on the corners of the HDD to ensure snuggly fit. All efforts rendered no change. Are there any other methods to reduce noise and vibration?
Furthermore, I still have one day to return the 7k500 without any loss. Should I get WD Scorpio Blue 500gb instead?
I have read user reports of similar problems with WD SB 640gb drives as well. Since these drives are essentially the same, I would expect similar problems with 500gb as well.
P.S. Is there any chance that the stock HDD is slightly "downclocked" by Apple? It does vibrate a lot inside external cradle. Furthermore, I tested a couple laptops in the local Apple store. Both MBP 15" and MBP 17" where equipped with 500gb 5400rpm drives.
However, MBP 17" was vibrating much more than the MBP 15" (maybe MBP 17 HDD runs at its native speed to increase the performance. The increased size of 17" makes the vibration effects less annoying).
The stock HDD vibrates just like the current one until after 1-2s after the power button is pressed- as if some sort of regulation kicks in after that point.
Mine is bulging out at the bottom of the screen, right by that area that gets burning hot when you are plugged in or are on the 9600m gt--right where is says "Macbook Pro".
I noticed that the hinge started to develop a creaking sound when I opened and closed the lid. So I investigated to see if there were any cracks in the hinge. What I found was that if you look at the space between the bezel and the screen, there is a slight (very slight) bulge right by the wording "Macbook pro". If you press down on it, it moves--unlike the rest of the bezel.
Anyone else notice this? I am pretty sure it is caused by the heat in that area. That is a really poor design.
