I have a macbook (10.5.1), and I am trying to share my internet through Airport -> Macbook -> Ethernet Cable -> Xbox 360 to get onto Xbox Live.
-What do I manually put as my IP?
-Subnet Mask is 255.255.0.0 or is it 255.255.255.0
-What do I put as my gateway?
Now, every time that my IP has confirmed, the DNS fails. How do I configure this properly?
I was wondering if anyone knows if its possible to share my LAN internet to an XBOX 360 using the Apple USB ethernet cable (for the Macbook Air) on my Macbook Pro 13"? I've tried several routers, and all have them have failed me giving me massive timeouts and sudden disconnects. I think this should be a good solution.
View 2 Replies View RelatedI am a NYU college student and have my macbook pro (running snow leopard os) connected to the internet via ethernet connection. My mac is sharing internet through it's ethernet connection and my ipod, blackberry, and friend's computers can connect via it's connection. However, the same does not go for my xbox 360. I keep getting a message saying "unable to connect to xbox live because my router can't assign an ip address" I have tried unplugging my internet for 30 seconds but it still doesn't work...neither does a direct ethernet connection.
View 2 Replies View RelatedFor the sake of the whole mac community , brave me picked up a Xbox Live Vision Cam from a local ToysRUs (299HKD, around 39 US bucks or 45 maple dollars), to see if it really works with 10.4.9 without a hack/driver~~ the whole thing apparently comes with the cam itself (ofcoz), a useless Xbox Live headset & some sort of Xbox Live trial gaming membership card
View 24 Replies View RelatedSo i've been using the xbox webcam for skype chatting while connected to my 3-year-old ibook G4 running OS 10.4.9 and all is right with the world... But I'd like to be able to use it with my (much faster) desktop G4 running OS 10.5.6, but no dice. the 'puter won't even recognize it. I browed around to see if it's just not compatible with Leopard but some folks out there seem to think it is.
View 2 Replies View RelatedI just purchased an Airport Extreme and it works wonders with our computers and phones, but when I tried setting up my XBOX 360 to XBox live I keep getting an error saying that I need to enable my UPNP to use all features of XBOX live. Anyone know how I can enable this on the Airport utility?
View 1 Replies View RelatedI have read a few forums and walkthroughs where a lot of people, often everyone, eventually had sucess in connecting their XBox 360 to their mac and accessing Live. I have tried everything I can find to make this work. Here is what I have done:
I am running Leopard and using a Linksys Router. I began with the following:
On the iMac:
Ethernet Connection (manual)
IP: 10.0.0.1
Subnet: 255.255.255
Last, I tried using making the primary and secondary DNS addresses the same. Every time I have the same problem.... it fails when testing the DNS.
I have an Airport Extreme and a Macbook Pro, I'm trying to open my NAT for online play with Xbox LIVE.
View 4 Replies View RelatedHaving a bit of trouble getting Modern Warfare 2 running on Xbox live. My setup is: BT Home Hub 2.0 wirelessly supplying my iMac with connection. I then have a ethernet cable running from the iMac feeding the internet connection to power Xbox Live. Previously this has worked flawlessly until. I try and play Modern Warfare 2. Currently when in the game screen it tells me that my 'NAT type is STRICT'. This isn't the case on my PS3 which is wireless where my NAT type is OPEN.
View 2 Replies View RelatedI'm home from college for the term, and I'm trying to get Xbox Live working on my brother's 360, but he managed to lose the wireless adapter. Instead of dropping the $100 for a new one, I'm trying to adapt the Time Capsule I already own to the purpose. My house already has a private wifi network, but the router is downstairs and the 360 is upstairs so I can't just run an ethernet cable to it.
What I want to do is set up the Time Capsule in the same room as the 360, connect it to the existing wireless network, then run an ethernet cable from the Time Capsule to the 360 so the 360 can connect to live. I tried joining the existing network, but that sets the TC up as a client and doesn't allow anything connected to it via ethernet to access the internet. Airport Utility won't let me set up the TC as an extension of the existing network unless it's connected via ethernet to the original access point, and like I said earlier, running ethernet cable isn't an option.
I have a feeling this should work. I have wireless internet from school, however I do not have the wireless router for my xbox. Is there a way I can link the macbook and xbox via ethernet cord and use the wireless connection that my notebook gets and transfer it to my xbox to play on live?
View 6 Replies View RelatedI recently had Fios installed and they provide a router/modem Actiontec M1424. I have it set up so I am still able to get wifi off my airport express since it provides faster wifi speeds. I am having a problem with xbox live.
I keep getting NAT moderate instead of open. I opened ports 3074 and 88 in airport utility but no luck. Is it because it is going through two routers?
Anyone have a similar setup and have an open nat? The reason I choose not to use the actiontec is because on live the connection is terrible but I have an open nat.
I am having trouble using my ibook g4 as a bridge between my xbox 360 and my wireless router, here is my setup.
Internet---Wireless Router---iBook G4(with airport extreme)---xbox 360 via ethernet
These are the settings I am using:
iBook g4
Internet Sharing from airport to ethernet port
The ethernet port has a static ip of 10.0.0.1 and a subnet mask of 255.255.255.0
Xbox 360
IP 10.0.0.2
Subnet mask 255.255.255.0
Default router 10.0.0.1
Primary DNS 192.168.0.1 (My Router's IP)
Secondary DNS xx.x.xxx.xx ( a dns server assigned by my ISP)
When I run check the xbox live connection it comes up with
Network(good) Internet(Fail) Xbox Live (Fail)
I have been scouring google for hours to this solution and cannot find a solution.
I have an Airport Express acting as the router, connected to the ethernet jack in my dorm.
Now, my NAT is OPEN.
But I cannot connect to my friends online.
DOES ANYONE have a working configuration????
Basically, I have a wireless router in my house that my Mac Pro connects to from a seperate room. I have an xbox 360 in my room with the Mac Pro. Without buying the $100 360 wireless adapter, could I configure it so I could run my 360 into my Mac Pro's ethernet port and piggy back off of my Mac's wireless connection to get on Xbox Live?
View 5 Replies View RelatedI've got an LED unibody MBP and for a month or 2. I've been internet sharing my connection from my HSDAP broadband dongle to my Xbox 360 through an ethernet cable. It took me AGES to get going! A while ago I upgraded to Snow Leopard and it broke it. I have no idea why, and i spent hours yesterday trying to get it to work again to no avail! [URL]. That is the guide I am using and for the most part its fine. Long story short, the DNS keeps failing. "Move onto DNS. Enter the IP address of your wireless router (in my case, "192.168.0.1") in both the primary and secondary IP address fields". Thats the part I am having problems with, as I don't use a wireless router, i dont know what to put in.
View 1 Replies View RelatedMy xbox and mac are both connected by router by an Ethernet cable. When I go to internet settings it say I might violate the terms of service of my isp(att yahoo dsl) Does doing the steps in the above link, will it affect anything that will violate the TOS, is their another. Safer way to connect the 360 to my mac?
View 1 Replies View RelatedSince it's possible to use a Mac as a wireless access point. I want to share my Ethernet connection through WiFi (not vice-versa), can I connect my Xbox 360 easily with that network or I have to painfully change the settings?
View 5 Replies View RelatedI have my xbox 360 connected to my macbook through ethernet. On my mac i have internet connection sharing enabled from airport to ethernet. Everything works fine apart from the xbox saying I have a strict NAT.
I made sure the ports were all configured to work with my router, and UPnP is defiantly enabled on my router. I even tested to see if it was something to do with my firewalls, but even with them turned off, I still get this NAT error
How to share my Mac's Internet Connection to my Xbox 360. I have enabled Internet Sharing from my AirPort to the Ethernet, and changed the IP settings on the Xbox 360, but I keep getting "cant connect to your network hardware using a static ip".
View 1 Replies View RelatedHere is my setup, and I have it all configured correctly, and everything works great. I am able to stream stuff off of the iMac with Connect360, and internet works great. I am not having any trouble configuring the ethernet port to share the airport connection. What I am trying to do now is have the 360 connect to the Media Center PC located downstairs hidden out of sight.
Because the 360 is getting it's connection from my iMac, would it still be able to connect to this MCE PC? (the only PC in the house, whose sole purpose is to be a DVR and eventually, serve the 360 up with cool MCE hacks such as a web browser for the 360, and Hulu). I am not about to buy a WiFi adapter from MS for $100, as that is overpriced and the iMac connection works fine.
I have been searching around the forum for this answer and I haven't found anything specific. Here is my network setup.
Bedroom:
Modem --ethernet-- Airport Extreme --ethernet-- iMac
Living Room:
Airport Express (Wirelessly Connected to Airport Extreme) currently setup for AirTunes using a bridged connection.
What I want to know are the specifics of running an ethernet cable from my XBOX 360 to the Airport EXPRESS and using that as my internet hook up to get on Xbox Live.
I've been trying to connect over internet sharing from my Macbook pro to my i-pad 2 and am having some issues I hope someone can adress. I go to Settings>Sharing from ethernet then to wifi. I name the network choose a channel then add a password from there I get this error message.
Are you sure you want to turn on Internet sharing?
If your computer is connected to a network, turning on Internet sharing may affect the network settings of other computers and disrupt the network. Contact your system administrator before turning on Internet sharing.
Info:
MacBook Pro
So far I haven't been able to get an airport connected computer to share its connection via ethernet with another. Am I doing something wrong or is this not possible?
View 2 Replies View RelatedI am getting a new mac and I would like to use my old one, Mac Mini, as a "media server" always on and has a big hard drive. Can I file share if I simply plug an ethernet cord INTO my mac mini and then INTO my iBook?
View 3 Replies View Relatedive successfully done this before with 10.5 and xp and am trying to replicate with 10.6 and win7.
my imac connects to internet via airport. i want to share that internet with a win7 box via ethernet cable. i've turned on internet sharing in sys prefs but to no avail.
Recently got a Mac pro. However my room only has one network socket going into my router, this goes to ethernet port 1. Internet works fine, no issues. However my old desktop (that the MP replaced) can't get online now - no second network port from the router into the room the computers are in. I have a crossover cable that I've used to connect the 2nd MP ethernet port to the PC ethernet port. However I can't get internet access on the PC. If the PC and port 2 are on their own subnet (not the router/port 1 subnet) I can get file sharing going between the MP & PC, but cannot figure out how to get the router/MP/PC on the same subnet together using both ethernet ports of the MP. I have already tried enabling internet sharing under system prefs etwork, but it doesnt work. Network: Router (connected to internet) at 192.168.1.1 - connected to mac MP port 1 - 192.168.1.2 - works fine in connecting to the net MP port 2 - 192.168.255.1 - works in networking to PC for filesharing PC - 192.168.255.2 - works in networking to Mac for filesharing Any combination of 192.168.1.xxx for the MP port 2 and PC, they can't fileshare anymore and there is still no internet for the PC. Anyone know how to do this?
View 17 Replies View RelatedI know the steps for internet sharing airport card's internet access to another computer via ethernet cable, but how do i set it up to share it with a router via ethernet cable?
View 1 Replies View RelatedI'm wondering how would it be possible to make my MacMini (last generation) as an access point 802.11n.I have setup an internet share between Ethernet and WiFi, but the bandwith looks to be more 802.11g than 802.11n.
Info:
Mac mini, Mac OS X (10.7.3)
Is it possible to share the internet through a protected ethernet network on os x?.. and if so, how can I do it?
I'm well aware that I can make a protected wireless network.
