I have tried calibrating the LCD screen on my macbook and after calibration the screen looks much better than it has before. The whites "pop" out more than they used to. The one thing I am noticing though is that some black text that I am seeing is looking to have more of a brown tint to it. Is there an optimum setting for calibration on a uMB so the colors look the best possible?
Im using a MBP 13'' 09 I believe (9400M). Every time I boot into OS X 10.6.5 and now 10.6.6 my screen is all washed out. I can see stuff but there are just way too much "whites. "(With an external and also with the internal).
An easy remedy for the external just requires me to unplug and replug the monitor back in and the calibration automatically fixes it's self on how it used to be.
Today I left my MBP on without the Power Adapter for calibration. Three hours later, when I arrived home, I found it with a black screen, unresponsive (didn't respond to any key or mouse movement whatsoever). No, the battery wasn't empty of charge, it still had half the charge! This is the second time this happens to me, I can't seem to think of a reason for this to happen.
I believe JDownloader was open, but not doing any downloads, but I'm not sure whether it was open or not, but besides it, nothing else was open.
Thing is I got hold of a 1ghz 17" iMac almost for free, it had a dead logicboard (I checked it with a voltage-meter), but I figured I could fix it and have a small hobby project-thingie going on. Well I just got a new logic board today, for a 1ghz 17" iMac g4.
Things is I only get a bright grey screen from my Mac when I boot. I've tried connecting it to a external display and that works fine. Everything is there.
I then reinstalled Tiger on it, with the computer connected to my external screen. And I still have the same problem. (I have now disconnected the ext. screen and is controlling the iMac from my MBP). So at least it isn't the installation.
So what is the problem? I can via an Apple Keyboard control the brightness on the blank screen, which would indicate that it does react to input of some degree.
I've read that if the inverter is dead or anything else is dead, you would get a rolling grey screen, flicker or something like that and not a steady bright grey. One thing I'm thinking is. What if somehow this logic board was for a 15" 1ghz imac g4? Can I check this?
I read that long thread about guys buying hi-res displays for their MBPs, and they had to replace some display profile? Could I maybe fix it with a different display profile-file?
I'm really confused by all this, and would appreciate any help I can get.
Model: PowerMac6,1 CPU-Type: PowerPC G4 (3.3)
and
the gfx chip is a GeforceMX4 with 32mb.
The display is a mode 9c27, manufacturer 610, serialnumber 00000, manufacture date: B84D7200.
Both the Macbook and HP monitor are set to display Adobe RGB, the HP displays really crisp whites, and the MacBook is yellow in comparison. I'm wondering if all Macbooks display colours this way, or is mine faulty? I tend to work on the larger screen, but it'd be good to have the option to use the small one also.
I've considered buying a calibration tool (an overdue purchase) and/or taking it to the Mac store, it'd be a great help if anyone knows if it's a problem that can be fixed at all.
so this has happened twice now in the past month, my mb is in screen saver mode and i wake it up to find that the color is off in the screen. meaning that the color settings changed and the screen has a swashed out blue tint to it. first time i restarted and all was good, second time i clicked on the preferences icon and then the screen went back to its normal setting. my normal setting is not the factory one but one of the ones that people said makes the screen look better.
so what gives, is the integrated chip dieing on me?
oh its a unibody that i got when they first came out, 2.0 processor one all factory
My screen went high-contrast. color profiles and calibration didn't work well - HOWEVER-It looks fine right before I log in! Is there a way to repair the color profiles or whatever? I Installed Photoshop Elements and Premiere Elements a couple weeks ago that's when I think it began
I had a quick question about the screen and how it dimms at wierd times.like the screen to be on the brightest possible setting but some times it dimms to a lower level. Why is that? Does it have to do with the light in my room?
I've restarted my computer to factory settings, but for wahtever reason, it has been stuck on the blue screen (similar to what you see when you turn on a mac) and refuses to go beyond that. Does anybody know why this mite be happening??? did i do something to mess it up??? (earlier i restarted it when it first hit the blue screen because i thought it froze or something). Is there something i can do to fix this problem?
Im selling my macbook pro and am trying to restore it to factory settings. I have inserted the "install disc" many times. However, my laptop is never able to start up. It alternates between a black and grey (no apple or wheel) screen. I've tried holding down the "C" key while rebooting..that didnt work. I've tried clicking restart when it instructs me to...that didnt work I've tried going to system preferences --> startup disk --> clicking the install drive and it still didnt work. What can I do? My mac can start up and work perfectly fine without the disk, its just that i need to restore it to factory settings.
When calibrating the battery, is it better to do a quick drain with a dvd or cd burning or a slow drain with the brightness all the way down or does it not matter?
I've got my SSD in an optibay and am using it as my boot drive. As such, I've disabled hibernation on my MBP.I am wondering about battery calibration, as you need to drain the battery down fully and have the MBP enter the hibernation state to properly calibrate the battery.
got my 13" MBA and am very happy about it. I plan to baby this thing, and I am always very conscious of battery life for all of my devices, so do any of you have any advice for how to best handle the first charge/discharge cycle?The machine almost fully charged out of the box. Should I run it down to zero and then fully charge it? Should I fully charge it first and then run it down?
I've done a search and not really found what I'm after. So here it is..
I like to edit photos, but I've never been confident in doing this on my Macbook, as I edit them and then on another display they always look different and over exposed.
Is it just a bad screen for colour accuracy or is it the calibration? What's the best way to sort this?
So I just got my macbook pro yesterday 2.8ghz. quick question. I just read up on the battery calibration process on apples website. seems straight forward. just one question. after i let the battery drain and let it go into sleep mode, then wait 5+ hours, then charge it to full. can i use the computer when i start charging it to full? or does it have to be off while im charging it to 100%? t
I just got my first Macbook pro 15" and trying to calibrate the battery. Can my MBP sleep on battery during calibration? Can i finish the process after sleep? It takes a lot of time to calibrate this device.
I have a HP w2408 flatscreen monitor, and I want to use it for my Macbook Pro as an external display. For some reason, after doing all of the calibration steps and whatnot, the colors on the external display still look too saturated and the text looks too washed out. Does anyone have a solution that will make the HP display looks similar to my Mac's? I'm using the Mini-Display Port to VGA adapter. The Mac is the oldest unibody.
I recently purchased a macbook pro. I'm a digital photographer & I'd like to colour calibrate the screen. Can anyone recommend the best calibration system for macbook pro? I'm using Mac OS X ver 10.7.2
I just got my first Mac yesterday, 13" MacBook Pro. I LOVE IT! I've been trying to find out some info on the battery calibration that I can't find anywhere. I have tried Apple's website, Google and MRoogle before I made a new thread about it
Ok, so I just did a battery calibration and once the battery got really low, it shut off, but didn't go to sleep like it has done before. It completely turned off; the battery light indicator is not indicating it is asleep. I've never seen it do this, has anyone else had this happen? I have a 2006 MacBook Pro, 2.33 C2D, non-unibody.
Well I just scored a 15 inch 2.4 from Bestbuy for 10% off. SOmebody just returned it having never even used it, but they had to discount it because it was opened. I love it love this thing!We did migration from our imac and everything came over. AmazingOne question about calibration. I charged it fully and let the power cord be in it for an extra 2 or so hours. I then used it unplugged until it basically shut off due to no power. Cant I just plug it in and let it charge all the way without letting it sit for 5 hours. Its not sleeping I dont think. It actually shut off suddenly as it was at zero percent. There is no power to it at all that I can tell. Will charging it now without leaving it unplugged for 5 hours ruin the calibration??
I've just calibrated my battery on my 2.4GHz MBP (let it run out until it slept, then woke it up, then used it till it shut down, then charged it) and it's stuck on "finishing charge". Additionally, the battery health has gone down to 23% from 37% since I have done this.
I looked through the yellow tint threads and sure enough noticed that my high res AG had it. At first I dismissed it as poor viewing angles. I calibrated the LCD, which seemed to make it a bit better. But it is not a matter of viewing angles. I tried the test on my friend's old blackbook, and when viewing the screen head-on, the bottom square definitely looks yellow, BUT, when tilting the computer back, changing the viewing angle, the square turns white again, thus, a result of viewing angles. The same thing on my HR AG doesn't change the color of the bottom square, it stays yellowish. So I'm pretty much convinced that it's a real issue, at least to some degree.
I'm considering taking it back to the Apple store, or at least going there and seeing how their display models look. Something tells me that nearly all HR AG models (the current shipment that's out right now) suffers from this, and that my replacement will be the same. Does anyone think this is true as well? Should I even bother trying to swap it out? The yellow tint threads have several people that are going through 5-6 exchanges, and all still getting the same problem.
use this thread to post your MacBook Air colour calibration profiles. I am sure a lot of people would like to try some profiles on their MacBook Airs'.
