MacBook Pro :: Scorpio Blue 320Gb Or 500Gb Upgrade
Jul 2, 2009
I am planning to purchase a 13" Macbook Pro base model (first Mac by the way), and I want to upgrade from the stock 160Gb HDD.
I don't really see myself needing 500Gb, but I have read that a higher density drive outperforms a lower density drive. Newegg currently has the 500 WD Scorpio Blue drive listed for $30 over the 320Gb edition. Will I see significant performance increase by going with the 500Gb model instead of the 320Gb one?
What about power consumption? Is one better than the other?
The thing is I dont really need 500gb of space. But from reviews Ive read that the 500gb is faster in some cases because of its higher platter density. Vibration /noise issues on the scorpio black 7200rpm sway me towards the scorpio blue 500gb as well.
Anyone had experience of either hard drive or both? (this will be for a 2.2Ghz MBP)
I am looking for advice on the wd5000bevt (500GB 5400rpm) Planning to get this as it supposedly has almost the same speed as a 320GB 7200rpm drive and doesnt come with the usual 7200rpm negetives (heat, vibrations and noise). Anyone with firsthand experience with this drive? It is quite popular so I am hoping I will find someone Also, I heard something about clashing motion sensor because the macbook already have one so you should avoid some drives. Does this drive have one? Is it compatible?
I've recently bought a WD Scorpio Blue WD5000BEVT 500GB 2.5" SATA hard drive to put in my PS3. I decided instead to put this in my MacBook Pro and put the 320GB drive from my MBP in the PS3 - which I have done and works perfectly.
Now the problem is the WD HDD in the MBP. I can physically hear the HDD spin down and then almost immediately spin up again. Whilst in this state of "spin down" OSX is a little unresponsive. Does anyone know how to stop the drive from shutting down so often. It literally happens every few seconds. I haven't noticed the problem when booted in Windows 7 though I could be wrong.
I'm looking at a MBP on CL and the seller has swapped out the HD and put in this WD Scorpio 320gb 7200 rpm HD. I'm wondering if any of you have this hard drive and can confirm it's quality or claim that it is of poor quality?
I installed the hard drive with no problem and have experienced greater performance, no clicking nor vibration, and no freezeup or rainbow wheel. I also did a clean install of Snow Leopard. I did a PRAM reset at the beginning and calibrated my battery. However, now I noticed my battery is draining FAST, only lasting 2 hours. I looked a little online and discovered I may still need to reset the SMC (shift-control-option + power key), which I will do shortly. The battery lasted 6-7 hours before with my old hdd and is at 96% capacity.
So I've just purchased a mid 2011 Macbook Pro 13" used via eBay. Was advertised as having 500gb hard drive and 6gb ram. I checked the ram and it was all legit, checked the hd capacity and it was all correct as well. So I made a new login for myself and deleted the previous owner's. Now my hard drive shows up as 320gb. Even in disk utility and terminal.
I'm aware that there are probably a dozen of these threads around in the forums, but if you have the time to tell me to search it up, then you have the time to answer my question. I am fully aware that this may void my MBP's warranty. I've decided to go with either the 500gb 5400rpm WD or Seagate. I'm just wondering which drive is more reliable and faster. Also, when installing the hard drive, is it ok to use a magnetic screw driver. Someone told me that there's an application called Superduper. It clones the original hard drive to make the upgrade easier. Is this a good application, or are there better options?
Now, I am in the market to replace my stock 160GB HDD in my MB, as I want a bigger hard drive in my PS3 and was thinking I could put the MB one in there, and buy a larger one for the MB.
I am debating between a 320GB 7200rpm and a 500gbrpm drive. I currently have this external drive:
[URL]
I HATE it. It takes a super long time to start up(close to 3-4 minutes) and then opening up videos takes a good 2-3 seconds. But, I have a 5400rpm drive inside the MacBook and was wondering if 7200rpm with 16mb cache would really make a significant difference in day-to-day use.
I just got my new MBP and it has a Toshiba MK5055GSXF 500gb inside. My old one has a WD Scorpio Blue 500gb. I know the Scorpio Blue is supposed to be fast for a 5400rpm. Does anyone have an opinion whether it would be worth it to switch them? Is the WD superior?
I have a White MacBook version 3,1 made in 2008 w/ the intel ICH8-M AHCI SATA controller. Unfortunately this controller is only 1.5gb/sec. I picked up a WD7500BPVT, WD Scorpio Blue 750gb, with a spec of 3gb/sec. Western Digital tech support assured me it would step down to 1.5gb/sec, no jumpers needed (as it isn't configurable by a hardware jumper). So I install it in my MacBook, boot up from the Snow Leopard install disc but it doesn't see my fancy, schmancy 750gb drive. Is the drive not seen because of a compatibility issue w/ the SATA controller? If so, what is the largest capacity 9.5mm drive someone has installed in a MacBook w/ the intel ICH8-M AHCI SATA controller?
I just upgraded my hdd to a 500gb WD scorpio blue in my 2010 MBP 13". It seems to start and stop a lot more than the apple one (if that makes sense). and every now and then the computer seems to lag for 1-2 seconds when doing things like typing, scrolling, etc. I've tried searching and found other people have had similar problems with older MBPs and they talked about some EFI firmware or something. Does this apply to my MBP too? Or does anyone have any other suggestions of what I can do?
The standard HD that came with my Mac Pro was a 320GB which I thought would be big enough. I also added a 500GB in bay two for all of my work files. As I migrate all of my files onto the Mac now, I'm realizing that the 320GB is quickly running out of space with all the photos, music, etc. and my work files currently take up about 50GB so the 320Gb would have been better for that. Is there an easy way to swap my 320GB boot disk files with the 500GB data drive?
Ok guys, so here is the story, i just bought the 500 GB Blue Scorpio, ran the Time Machine back up on an external hard drive and wanted to install the 500 GB on my macbook, inserted the Mac OS CD and in the section where it asks where you want to install the Mac OS, i didnt see anything it was blank and it didnt give any options or anything.so now i installed the old hard drive and i am using that one, what am i supposed to do ?
I'm looking to upgrade the 320gb hard drive that came with my 2.66ghz MBP. I was just wondering what's the quickest 500gb 2.5" drive around now? I would love to get the scorpio blue 640gb but I can't really justify the fact its like double the price of most of the 500gb's.lso does anyone know a good website to buy from inside the UK for stuff like hard drives and Ram, because newegg seem good but I don't think they ship here
I recently put an upgraded hard drive in my new aluminum unibody MBP. I replaced the stock 5400rpm drive with a 7200 RPM 320 GB drive - a Western Digital Scorpio Black. I can feel a lot more vibration and I'm just wondering if this is normal. The drive upgrade and subsequent install went fine. It's mounted correctly and tight in the case. Has anyone else done this? Can you feel the vibration on your wrists more when typing? It's not annoying really, but a lot more noticeable. I took it in to the Apple Store recently and a genius commented that it was noticeable, but they don't have much experience with the new MB's and MBP's with 7200rpm drives yet, so he couldn't tell me if it was normal or not.
On another note - I get two ACL errors every time I run disk permissions. They say ACL not expected but found in "Applications" and "Library". They never go away not matter how many times I repair disk permissions. The genius said to ignore it, it's not a problem, and the web says the same thing pretty much. It's still annoying, and repairing permissions can take 5-10 minutes with this new drive.
I have a 2009 MB Pro CTO 500GB looking to upgrade it to 750GB, I have heard that Western Digital Makes a 750GB drive 5400 that will work, part #WDG WD7500KEVT, has anyone heard about this or had experience or know of another drive that will work.
I needed to upgrade this unit in order to increase performance with VMWARE Fusion as I needed to use a few Windows 7 features and Applications... and although Mac OS is OK... I have to recognize that some features of Windows 7 are better and I need some only windows applications.
So I researched online the option of upgrading memory and HD. I read mixed opinions and experiences with non Apple Memory. But took the chance and during a recent trip to the US I purchased the Kingston upgrade kit... installed it... and so far no problems. I got a very noticeable increase in startup and working performance with Windows 7 and Fusion. Unfortunately I lost my notes regarding performance readings... sorry.
I was very intrigued with the Hybrid Seagate 500GB Momentus XT. Also read a lot of mixed experiences. I also picked up a unit during my trip to the US but waited to install it when I got back to Spain. I just installed it and made some simple timings to check the performance......................
Will I notice much difference if I upgrade to the seagate m xt 500 gb with 32cache?
Baring in mind I havnt got my 17" i7 2.8 in the post yet..
I'm thinking I can install the new drive as soon as I get the Mbp and do a fresh install as I'm assuming I'll get the iLife disks with the laptop so I can install it? Aswell as the OS cd's too?
I ordered some hard drives for an upcoming low-budget short film the other day. Due to budget constraints I couldn't exactly buy the "ideal" drives, but these will work fine nonetheless. I ended up with the following:(2) WD Caviar Blue 500GB (WD5000AAKS) 7,200-rpm (for camera data capture; 1 primary and 1 backup)(1) WD Caviar Black 640GB (WD6401AALS) 7,200-rpm (for editing and post)After unpacking the drives, I proceeded to run the AJA System Test on each drive to test the read/write speeds and noticed some interesting things. Being a nerd, I was simply curious. And just to preface, all three drives were blank and freshly formatted (Mac OS Extended), with no data previously written to them. Here's what I noticed
I have a MacBook (Mid 2009) and want to upgrade my hard drive to a 500GB (or maybe higher) 7200rpm drive. I have already upgraded the hard drive once, from the standard 160GB to a 320GB 5400rpm, so I already know how to do it.I just need more storage, rather than using external drives. Also, after I upgraded to the 320GB drive, the startup was much slower than when using the stock drive, so that is the reason for having a 7200rpm drive.
The System Mac OS X 10.7.3 has no missing icon in the main system preferences -> Apearance "Blue" Screenshot 1, 23.05.12 AFTER UPDATE: The System Mac OS X 10.7.4 has a missing icon in the main system preferences -> Apearance "Blue" Screenshot 2, 23.05.12 What about you?
I have iMac 27 and screen problem on start up i have blue vertical lines, when it start i have a lot of blue dots and nothing else. when I connect outside monitor its showing the same.
Just installed lion and still the same problem when it starts blue dots, when startup in safe mode loads of blue lines and dots on the screen.
I have a Macbook pro, 15.4 inch 1.86 core duo. I tried to upgrade the memory from 1gb to 2 gb. When I turned it back on, all I got was a solid blue screen after start up.
Three days ago a noisy fan brought me to the Genius Bar at my Apple store and when i got there the boot screen stayed gray and had a folder with a question mark in it. I have a late 2006 15" MPB running Snow Leopard 10.6.6. The guy told me i need a new hard drive so i went out and bought a Western Digital Scorpio Black 320g 7200 rpm SATA drive with a 16 mb cache. I replaced the old one with it, formated and installed OSX 10.6. I then used my time capsule to recover my last back up. I completely restored it. TWO DAYS OF PERFECT USE Now, i have the annoying fan noise again and my console is telling me that my HDD is having disk0-02 i/o errors. A LOT OF THEM. I've had at least 30 before noon today. Currently i am writing zeros to my drive and going to reinstall 10.6 WITHOUT using my time capsule restore (incase that has bad blocks written to it) Has any one heard of issues like this before with the particular HDD i bought? Two HDD failures two days apart seems fishy to me, what other issues should I be looking at? Is it possible i'm getting the i/o errors from a bad HDD ribbon cable to the logic board?
