Installed a Samsung SSD 830 256GB into my MBP 15" after duplicating the hard drive via disk utility. But bootup times has nearly doubled from 35 seconds of the old HDD to 63 seconds with the new SSD when it's supposed to be the other way round! Applications do startup and run very fast though. Tried repairing my permissions but that hasnt helped.
Info:
MacBook Pro, Mac OS X (10.6.8), 2.2GHz i7 intel, 4GB RAM, 500GB HDD
It slowed down mine with almost 15 sec. My MBP used to boot up in 30 sec no the best i could do after trying several times is 45 sec. Do you guys have the same problem?
View 24 Replies View RelatedI have a 2007 Santa Rose MBP and it has started to run very slow during the bootup and actual use of it. Here is how the bootup goes:
I turn it on and get the bong sound and a full white screen. In about 10 seconds I get the Apple log and in about another 10 seconds the circle that rotates as it boots up.
Then at about 2 minutes it changes color to a light blue color with the pointer on the screen. Then in about another 10 seconds changes to a darker shade of blue. At a total of 3 mins and 40 secs I then get the desktop with the space type background and in a couple more seconds the Mac OS X login screen. It takes around a minute until I am able to type anything. For awhile before that time I can type I get the beachball.
Here are the details of what I recently did:
I had a 250GB hard drive in my MBP running the newest version of Leopard. I was down to around 50GB free so I purchased a 640GB hard drive. I also was due to upgrade to Snow Leopard. I had an external USB enclosure that I could temporarily use. What I did is put the 640GB hard drive in that external enclosure and formatted it with the GUID partition table. I then used SuperDuper to mirror my internal hard drive to the external hard drive. I have a lot of programs installed and a lot data on my hard drive so didn't want to lose any of this.
Once the mirroring of my internal hard drive was completed to my external 640GB hard drive I then booted from that drive (using it externally and selecting option at bootup). Things seemed to run fine with no issues.
I then after booting up from this external hard drive did a Snow Leopard upgrade to this external hard drive. Once again this external hard drive appeared to run perfectly normal.
After things seemed to be okay I then opened up the MBP and swapped hard drives so the 640GB drive was my new internal HD. I then booted and once again I used it some and things appeared to work normally.
After this later in the evening I installed two programs, Final Cut Studio 3 and Logic Studio 9. As far as I can remember my computer was acting a little odd and after a reboot that is when all the above issues started.
As far as I can tell this never started until those two installs. Is it a chance I didn't try it out enough but I remember even with the HD being external USB my system appeared to run faster than ever. I even think the program didn't start with Final Cut Studio but started with Logic Studio 9
Any idea of what caused this? Even after my computer running it's VERY slow to the point of being almost unusable. For example if I open Word it takes 3 minutes or so to open. Almost any action causes the beachball to appear.
After looking at the Apple site I did both a PRAM erase (using Command Option P and N) and also a SMC reset by removing the battery and power cord and pressing the power button for over 5 seconds and neither fixed it.
I opened up Disk Utility and did a Verify Permission and got the following information:
Permissions differ on "usr/share/derby", should be drwxr-xr-x, they are lrwxr-xr-x.
Warning: SUID file "System/Library/CoreS...as been modified and will not be repaired.
Ive had my macbook for about 2 months and its seemed to working just fine. However today while listening to music it decided to lock up and freeze for a good minute before it would unlock and continue playing the music through itunes. It did this a few times so I finally decided to restart the computer. The first time I booted it it froze on the apple logo and the loading circle. I killed it and rebooted, it takes about four to five minutes to get to the desktop picture, and another five to pull up the main menu bar. I am going to let it sit over night and see if it gives me any error messages, however; I still haven't seen the dock at all, and ive let it start for about twenty minutes now. It will usually show the top menu bar and then the mouse will give me the sbod while it slowly loads up the top menu bar, and usually the clock is a good few minutes behind.
I have tried a pram zap, draining the power off the board, checking the sata connection, unplugging the power, and I ran a hardware check at start up and it said everything was ok. I am currently typing on my tank of a toshiba laptop that still works after being dropped multiple times and has been heavily used for a good 3 years. The mac has been completely useless is most work situations. Its a refurbished 2.53ghz 4gb ram 9600m 512mb 15" mbp. I am thinking of reformatting it and hoping it works, and then selling it and using the money for a new toshiba or a custom built desktop, because I just cant deal with the amount of money and time I have lost trying to deal with this thing while I could have been getting work done.
So about a week ago I attempted to Dual Boot Ubuntu on my Boot camp partition. Due to a compatibility issue, even though I installed it easily, it was very slow, so I proceeded to erase all data on all the partitions the installation created, ending up with The OS X partition + 4 other ones. (there was an EFI part. too).
Now here's the problem. Right after I uninstalled Ubuntu, when I booted up my MBP, it took a VERY long time to The Logo to appear, almost seems like it was searching for something, ... . The same thing happens after I uninstall rEFIt, and after merging some of the partitions, ending up, right now, with 3 partitions. What a mess!
Boot time, unless I press the option key and select Macintosh HD, is about one minute 15 sec. because of the insanely long time to the logo to appear.
What the heck do I do? I would prefer not re-formatting my disk, I've gone through so much downloading and installed a whole bunch of things I need... And I don't have an external Drive.
I have a 1.83 MBP, with 1.5 gigs of RAM (stock 512 + additional crucial 1gb) 80 gig HD. Pretty standard.My issue is that once in a while when I restart my machine, bootup is really slow and then I get a weird screen glitch. Often I won't get a full re-boot but will get a half appearing dock and no desktop icons. Sometimes it will have lots of grainy lines across it. Sometimes I will get the beach ball for extended times and it will just freeze there. Basically I keep restarting it, and eventually it goes away and boots up normal.
The thing is I can't really replicate the problem. It just happens at random. Sometimes it happens after I have a system crash, and I need to restart, and sometimes it happens just after a system update restart.Like I said, it doesn't happen that often, but when it does it kind of freaks me out. I've had the logic board replaced in the past to eliminate the "whinning" (which, thankfully is now gone) and I wonder if this is another logic board problem. Other than that the computer has been great. And upon the complementary Applecare expiring pretty soon, I wonder if I should take it in for a repair or just not worry about it. It's kind of hard to take it in if I can't really show them the problem.
When I start up my 2010 Macbook Pro now, the fan starts running as soon as the spinning gear appears below the apple logo, the boot up is insanely slow, the mouse doesn't track well with my trackpad movements, and trying to open programs often leads to a non-responsive program with the pinwheel of death spinning for minutes at a time. I try to shut it down (takes approx. 20 min. now) and when the screen goes black, the fan continues full blast. After that I can boot up the computer and it runs normally, but the whole process takes about 50 minutes longer than it should, especially with a relatively new SSD (~ 8 months old).
It loads well enough in safe boot, and I've tried cutting out most of the apps that launch at startup with poor results. I've also tried resetting the SMC with equally poor results.Â
Here's my Etresoft report as well. etreCheck version: 1.9.15 (52)Report generated August 27, 2014 at 10:51:10 AM MDT Hardware Information: ? MacBook Pro (13-inch, Mid 2010) (Verified) MacBook Pro - model: MacBookPro7,1 1 2.4 GHz Intel Core 2 Duo CPU: 2 cores 4 GB RAMÂ
[Code]...
Info:
MacBook Pro (13-inch Mid 2010), OS X Mavericks (10.9.4)
Just yesterday I went to reboot my iMac running OS X 10.5.5. I believe this is the first time I rebooted since the 10.5.5 install process, and I was shocked to see how long the reboot is now taking. In the past this was a 1-2 minute process.
The reboot was so slow I decided to try again to see if that was an one-off, but the delay was identical. I get the normal off-white re-boot screen with the spinning graphic. Then I drop into a solid off-blue screen (looks a lot like a crash) for approximately 10 minutes before my desktop background comes up and from there all seems nominal.
Has anybody else started to experience this long re-boot with 10.5.5? And if so, have you found any fixes and/or methods that can be used to speed the process up? Something is clearly wrong, though once I'm booted all is nominal, so it seems like the issue is only impacting the boot process.
I do have a friend who is using his Mac in a networked university environment, and when he installed 10.5.5, he couldn't boot/login at all, so it could be that there is some generic boot/login issue with 10.5.5.
In any case, I'd just like to get back to some semblance of nominal boot time.
I'm trying to determine, even after a visit to the Apple store and clean install, if my boot up time is sub-optimal. It's still taking over a minute to bootup to the desktop (from the start up sound). What's ya'lls times for booting up?
View 24 Replies View RelatedI have a 2007 Santa Rose MBP and it has started to run very slow during the bootup and actual use of it. Here is how the bootup goes:
I turn it on and get the bong sound and a full white screen. In about 10 seconds I get the Apple log and in about another 10 seconds the circle that rotates as it boots up.
Then at about 2 minutes it changes color to a light blue color with the pointer on the screen. Then in about another 10 seconds changes to a darker shade of blue. At a total of 3 mins and 40 secs I then get the desktop with the space type background and in a couple more seconds the Mac OS X login screen. It takes around a minute until I am able to type anything. For awhile before that time I can type I get the beachball.
Here are the details of what I recently did:
I had a 250GB hard drive in my MBP running the newest version of Leopard. I was down to around 50GB free so I purchased a 640GB hard drive. I also was due to upgrade to Snow Leopard. I had an external USB enclosure that I could temporarily use. What I did is put the 640GB hard drive in that external enclosure and formatted it with the GUID partition table. I then used SuperDuper to mirror my internal hard drive to the external hard drive. I have a lot of programs installed and a lot data on my hard drive so didn't want to lose any of this.
Once the mirroring of my internal hard drive was completed to my external 640GB hard drive I then booted from that drive (using it externally and selecting option at bootup). Things seemed to run fine with no issues.
I then after booting up from this external hard drive did a Snow Leopard upgrade to this external hard drive. Once again this external hard drive appeared to run perfectly normal.
After things seemed to be okay I then opened up the MBP and swapped hard drives so the 640GB drive was my new internal HD. I then booted and once again I used it some and things appeared to work normally.
After this later in the evening I installed two programs, Final Cut Studio 3 and Logic Studio 9. As far as I can remember my computer was acting a little odd and after a reboot that is when all the above issues started.
As far as I can tell this never started until those two installs. Is it a chance I didn't try it out enough but I remember even with the HD being external USB my system appeared to run faster than ever. I even think the program didn't start with Final Cut Studio but started with Logic Studio 9
Any idea of what caused this? Even after my computer running it's VERY slow to the point of being almost unusable. For example if I open Word it takes 3 minutes or so to open. Almost any action causes the beachball to appear.
After looking at the Apple site I did both a PRAM erase (using Command Option P and N) and also a SMC reset by removing the battery and power cord and pressing the power button for over 5 seconds and neither fixed it.
I opened up Disk Utility and did a Verify Permission and got the following information:
Permissions differ on "usr/share/derby", should be drwxr-xr-x, they are lrwxr-xr-x.
Warning: SUID file "System/Library/CoreS...as been modified and will not be repaired.
I have a 2007 Santa Rose MBP and it has started to run very slow during the bootup and actual use of it. Here is how the bootup goes:
I turn it on and get the bong sound and a full white screen. In about 10 seconds I get the Apple log and in about another 10 seconds the circle that rotates as it boots up.
Then at about 2 minutes it changes color to a light blue color with the pointer on the screen. Then in about another 10 seconds changes to a darker shade of blue. At a total of 3 mins and 40 secs I then get the desktop with the space type background and in a couple more seconds the Mac OS X login screen. It takes around a minute until I am able to type anything. For awhile before that time I can type I get the beachball.
Here are the details of what I recently did:
I had a 250GB hard drive in my MBP running the newest version of Leopard. I was down to around 50GB free so I purchased a 640GB hard drive. I also was due to upgrade to Snow Leopard. I had an external USB enclosure that I could temporarily use. What I did is put the 640GB hard drive in that external enclosure and formatted it with the GUID partition table. I then used SuperDuper to mirror my internal hard drive to the external hard drive. I have a lot of programs installed and a lot data on my hard drive so didn't want to lose any of this.
Once the mirroring of my internal hard drive was completed to my external 640GB hard drive I then booted from that drive (using it externally and selecting option at bootup). Things seemed to run fine with no issues.
I then after booting up from this external hard drive did a Snow Leopard upgrade to this external hard drive. Once again this external hard drive appeared to run perfectly normal.
After things seemed to be okay I then opened up the MBP and swapped hard drives so the 640GB drive was my new internal HD. I then booted and once again I used it some and things appeared to work normally.
After this later in the evening I installed two programs, Final Cut Studio 3 and Logic Studio 9. As far as I can remember my computer was acting a little odd and after a reboot that is when all the above issues started.
As far as I can tell this never started until those two installs. Is it a chance I didn't try it out enough but I remember even with the HD being external USB my system appeared to run faster than ever. I even think the program didn't start with Final Cut Studio but started with Logic Studio 9
Any idea of what caused this? Even after my computer running it's VERY slow to the point of being almost unusable. For example if I open Word it takes 3 minutes or so to open. Almost any action causes the beachball to appear.
After looking at the Apple site I did both a PRAM erase (using Command Option P and N) and also a SMC reset by removing the battery and power cord and pressing the power button for over 5 seconds and neither fixed it.
I opened up Disk Utility and did a Verify Permission and got the following information:
Permissions differ on "usr/share/derby", should be drwxr-xr-x, they are lrwxr-xr-x.
Warning: SUID file "System/Library/CoreS...as been modified and will not be repaired.
Since it said it didn't repair it I did a Repair Disk Permissions but that didn't seem to fix it.
I have a 80GB Intel X25-M G2 that cannot boot in less than 30s.
I keep reading that people get bootup times as low as 15s, and I was wondering if there is something I am doing wrong.
I am using about 30 GB of SSD space, and I use a 500 GB 7200 RPM Seagate Momentus XT hybrid as a scratch disk (downloads, documents, pictures, etc.) in the optibay.
I just did a clean install of snow leopard yesterday, formatted my X25 (wrote zeros, mac [journaled]), installed SL, updated, etc. The bootup time went up to over one minute.
I reinstalled snow leopard again (did not format this time) and it went down to 33s. I then reset the pram and it went down to 27s.
Now, it's back around 30s.
my new 2TB Time Capsule takes anywhere from 3 to 5 minutes to startup, before the status LED eventually changes to solid green. during that long startup period, the light is amber and blinks slowly.
View 1 Replies View RelatedI've been using my Intel Mac-Mini without a hitch for three years now. Previously it had been plugged into a Samsung 32" LCD TV, but I've just swapped it over for a 1080p Panasonic 37".
Now when I turn on the mac it takes a long time to boot up and then eventually settles on a blue screen. The mouse pointer is visible but nothing else. I've tried using a dvi to vga adaptor and an HDMI to vga cable and the same thing happens.I tried a 15" Samsung monitor and the same thing happens.
If I boot in 'safe' mode it allows me to type in my password but when I try to log in it fades to blue and then returns to the log in page.
A couple of weeks ago my IMAC 24 started taking a long time to bootup, 5 minutes and 20 seconds.
It starts with a blank white screen for 1:45, then a black & white blinking world icon comes up for 2:15, then a blinking black & white Apple icon comes on for 30 seconds, then a pale blue blank screen for 20 seconds. Then the wallpaper comes on and it seems to go to a regular boot from there. Where can I access what is happening during all of this 5:20?
For the first 39 seconds the screen white. It takes another 25 seconds for the imac to be in watcha you call it--standby mode. In all 64 seconds. Wonder how long it takes the i7?
View 10 Replies View RelatedMy G5 is taking over 5 minutes to boot up. Why?
Info:
PowerMac, iOS 5
I just bought my first Mac a few weeks back and the switch has been going good but have had one thing that I can't seem to find any info on...
Is it possible to change the boot order on a Mac like in the BIOS on a PC? The reason I ask is that when I have my external hard drive connected the bootup time is slower.
Could this be that the Mac equivalent of the BIOS is doing a quick scan of the hard drive first, looking for an bootable operating system? Or is that extra time just OS X mounting the hard drive?
I installed XP pro SP3 on Macbook aluminum 2.4 ghz.Updated all drivers but running windows update downloading < 20 kb/sec. Only downloading on speedtest half what normal wifi runs.
View 3 Replies View Relatedrecently my Mac is really slow, slow on startup(took around 1-2hours), and slow on task(more than 5 minutes delayed time on every single task), I don't know what happened to it,
My Mac specs: Â
1.Mid-2010 27 inch iMac,
2.Original 4g Ram upgraded to 12g
3.1TB HD has got more than 400gb free space.
4.i3 processor
5.Using latest Lion(I think it's 10.7.3)Â
Problems: Â
1.Startup tooooooooo slow, take more than 1 hour
2.Extreamly slow on tasks. Without any apps opened, every single click, it turned into the 'colorful fan', for instance, open finder, it took more than five mins, and it's not only the finder, it's EVERYTHING!!!!Â
What I have done so far:Â
1.I have reduced the login items
2.I have changed the password login to the automatic login
3.I have tried verify disk permission, verify disk, repair disk permission and repair disk
4.Unplug all unnecessary items(monitor, external drive etc.)
5.Run couple of time of 'clean my Mac', get rid of all the trash.
6.Cleaned the cacheÂ
Due to the ridiculous, frustrating startup, that's all I could do, however, none of them worked.
Now I am using recovery HD to reinstall Lion from a disc, but I don't know if it'll work or not.Â
I don't have another Mac, I don't have backups(don't want to lose my data),that's my situation.
Info:
iMac 27'', Mac OS X (10.7), iPhone 3GS,iPad 3G/Wifi 64G, Sony vaio CR
I understand Time Machine taking a longer time initially when first installed, however my Time Machine seems to always be running, backing up ALL my files each time not just the newer ones. i.e. "it" (Time Machine) is always running.
View 1 Replies View RelatedI have a 1st generation MacBook Pro. I installed Leopard and now it is very very slow. I get the colored circle all the time and a lot of "not responding" apps that I have to force quit.
View 4 Replies View RelatedI've had my MBP for 3 years (specs below). and recently I've noticed a significant reduction in speed. I can't even play a 720p mkv without the video skipping sometimes frequently. I have plenty of ram and my CPU should be fast enough. I was jsut wondering if macs slow down over time. or could the reduction in speed be due to all the installation of programs and defragmentation and stuff.
View 24 Replies View RelatedMy emails are sending at a snail's pace. ISP is fine.
View 11 Replies View RelatedA few days ago I had to use Time Machine to patch up my Macbook Pro. For some reason the laptop froze at a blue screen when starting. I fixed this by using Time Machine and went back to my backup of december the thirtieth. Everything went smoothly and works perfectly! But the laptop is much slower then before. At first I thought it was because the system needed some time to set everything straight again, but the performance aren't improving. I'm using a lot of music program's. (Pro Tools 8, Logic 8) I can clearly see that my laptop can take less then it did before. Same thing for a game. The game doesn't run that smooth now on the same settings.
View 7 Replies View RelatedI've recently upgraded my MacBook Pro into MAC OS X 10.6.2 and I started to experience a low booting time (over 17 seconds). Another issue, when I start the computer I always get the starting screen where the apple logo is shown as zoomed. I tried to check the display but its fine.
View 2 Replies View RelatedEver since 10.6 my MBA has shut down in seconds, however this afternoon its now taking over a minute - can anyone shed any light as to why?
I've attached the log for a shutdown from button pressed to actual power off if anyone could point anything out...
I just bought the $1199 Macbook Air (2012). It works great but the start up time from when I hit the power button is significantly slower than my 2011 Macbook air. My 2012 takes about 35-40 seconds to boot-up. My 2011 takes about 15-10 seconds. I have downloaded all the updates and restarted several times but every time its still 35-40 seconds, Is this normal for the 2012's?
Info:MacBook Air, Mac OS X (10.7.4)
I just got my Intel X25m 160gb, and it's really fast, except for the boot time. It takes 30 to 32 seconds to boot each time. I searched around and I did what everyone else did to fix boot times, and I've had no luck. When I got it, I formatted it to Mac OS Extended (Journal), and made sure it was the startup disk in System Preferences. (here's a picture: ) Once the white screen with the apple logo comes up, it takes 10 seconds to boot into OSX. Any suggestions to decrease the boot time?
View 24 Replies View RelatedI had a system update a couple of days ago and since then I've noticed a slower boot time and my toolbar/applications hang for a while. It never used to do this before the update.
I'm on a Macbook Pro OS X 10.6.8.
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.6.8)
