MacBook Pro :: Stuck On Grey Screen With Apple Logo "disk0s2 I/O Error 2009"
Jan 10, 2011
I have a Macbook Pro 13 from the summer of 2009. After Christmas I decided to upgrade my hard drive and memory. This is what I got. [URL] For about a week everything seemed to work perfectly. I then began to have problems almost every day (finder crashing, etc). I reinstalled OSX probably 5 times using my previous account until finally did a clean wipe and reinstalled OSX again. It now seems to be working for the most part, but booting takes about two minutes. It gets stuck on the grey screen with the Apple logo with the turning gear for a couple of minutes before it boots. Normally it wouldn't bother me too much, but after the problems I was having before, I really wanted to make sure that there was no problem with my new hard drive or memory. After doing the usual suggestions for slow boot time (resetting PRAM, disconnecting external devices, repairing disk permissions, etc.) nothing changed. I booted into verbose mode and it seems to hang up for awhile before listing
disk0s2 i/o error
It does this twice before booting, hanging up for about a minute before giving the error. I am not sure if i should return it under warranty because I am not sure its broken. Like I said, it seems perfectly fine right now with the exception of the boot time. Using the Apple Hardware Check, even the extended check, didn't give any errors. The SMART status for the hard drive is verified. Is this clearly a hard drive issue, or could it be something else? Has anyone else had a similar problem?
View 5 Replies
ADVERTISEMENT
May 1, 2012
Macbook Pro was purchased in mid-late 2009 and is running on OS X 10.6. Today is suddenly stopped responding and so I turned it off. When I turned it back on it opend to the grey screen with the Apple logo and the loading icon and that is where it stayed. I have been searching for the answer on different forums but have yet to find a solution. My hard drive is appearing in the Disk Utility but not in the box when I try to reinstall OS X.
Info:MacBookPro, Mac OS X (10.6)
View 6 Replies
View Related
May 15, 2012
Mac book pro grey screen apple logo
Info:MacBook Pro (13-inch Early 2011), iOS 5.1.1, Mac book pro opening with grscreen
View 2 Replies
View Related
Jul 11, 2009
My MacBook Pro will not boot up any more. It just suddenly happened. It turns on and comes up to the gray screen with the apple logo and then the circle progress icon comes up and spins.
View 1 Replies
View Related
Jun 3, 2014
My Macbook with 4 gb RAM won't boot standard, safe, or Recovery.. All three results in grey screen with apple logo and spinning wheel which freezes after a few minutes. It also won't boot a bootable Mavericks usb with install package. I can boot single user mode and also view whats going on in verbose.. I am including a photo of where the script stops. PS: I've already tried resetting PRAM and the SMC has been reset as well.
Info:
MacBook Pro, OS X Mavericks (10.9.3)
View 3 Replies
View Related
Jun 26, 2014
I have a MacBook Pro from 2010 I believe with iOS Maverick installed. (MacKeeper is also on there, which I just found out is apparently malware)Â
So three days ago I was watching Netflix, the image froze, but the audio kept going. Figured my internet was slow, so I waited a little, nothing happened. pressed escape to leave the full screen mode, but nothing happened. None of the keys would do anything, not even the sound or brightness keys. So I did a force shut down by holding down the power button.Â
I waited a little, then decided to turn it back on. Start up sound played, white screen with grey apple logo and loading gear appeared together with a grey loading bar. I figured that this meant it had to repair something. But after about a minute or two it just went to a black screen/ shut down. I left it off for a day, tried it again, same thing. Next day I tried booting it up while holding the shift key to do the safe boot (I knew it wouldn't work since I already had the grey loading bar anyways), same thing happened.Â
View 9 Replies
View Related
Apr 9, 2012
I deleted the entire vm folder and now my MacBook Pro won't get beyond the grey screen with the apple logo. I don't have any recovery discs with me. What can I do to rescue my MacBook Pro?
Info:MacBookPro, Mac OS X (10.7)
View 13 Replies
View Related
Mar 17, 2009
I was trying to install Windows XP Pro, but for some reason the it wasn't showing another HDD to install Windows on. So I quit the install, and restarted my computer. Now all that happens is the normal grey screen appears (with no Apple logo), then it goes to a black screen and has the blinking cursor (Kinda like DOS).
View 14 Replies
View Related
Feb 8, 2012
i tried to install snow leopard on my computer, but then found out it was only a one user disk and had already been used, so i started it back up on the hardrive and now it wont go past the white loading screen with the apple logo and then just shuts down. ive tried restarting in safe mode but thats about all i know how to do.
Info:
MacBook, Mac OS X (10.5.8)
View 4 Replies
View Related
Feb 8, 2012
i tried to install snow leopard on my computer, but then found out it was only a one user disk and had already been used, so i started it back up on the hardrive and now it wont go past the white loading screen with the apple logo and then just shuts down. ive tried restarting in safe mode but thats about all i know how to do.
Info:
MacBook, Mac OS X (10.5.8)
View 3 Replies
View Related
Jun 14, 2012
My 13" macbook is stuck on the grey opening screen with the apple logo and progress circle.
Info:
MacBook
View 1 Replies
View Related
Aug 20, 2014
My MacBook Pro won't boot past the white startup screen with the Apple logo. After doing some trouble shooting my best guess is that the issue is either an issue with the logic board or the hard drive, but I am no expert so I may not be right. Here is what I have tried so far. I have done all these steps multiple times and the results have varied, but here are my most recent results:
1) First off, there are no peripherals connected so that is already ruled out as the cause.
2) When I try starting up in safe mode (holding shift while starting), the Apple logo, spinning wheel and progress bar appear. The progress bar fills about a third of the way then stops. I have left it for quite a long time and it still stays at a third of the way.
3) When running a safe boot (holding shift+command+v at startup) it gives me a " SATA WARNING: Enable auto-activate failed" message, and then eventually times out. Here is the full message:
4) Resetting the PRAM (holding option+command+p+r at startup) does the second chime but only results in the flashing folder icon with the question mark.
5) I tried booting up the computer in single user mode (holding command+s at startup) and running fsck -fy, it again gives me a "SATA WARNING: Enable auto-activate failed", then eventually times out. Here is the full message:
6) I tried booting in recovery mode (holding option while starting). When I do this I do not get the OSX utilities screen. Instead I get a white screen, sometimes my hard drive shows up on the screen, sometimes it does not.
If i boot in recovery mode with my osx install disc inserted the disc appears. If I select the hard drive we are just back to the apple logo and spinning wheel. If I select the install disc it goes to the apple logo/spinning wheel again, sometimes it allows me to start running the install, but then when it gets to the step where you select the hard drive to run the install on, no hard drives appear.
So that's where I'm at. I do not care about losing any data because luckily I backed up this machine right before this started happening.
View 6 Replies
View Related
Nov 10, 2009
When i start the computer and the grey screen comes up with the apple logo etc., a grey "loading" bar has started appearing in the bottom of the screen. Takes a few minutes for it to go away. In the meantime the computer gets very hot and the fans are up to 6000 rpm. Then the os starts up, and I cannot download anything, due to the fact that it thinks my harddrive is full, though i have more than 100 gb of free space.I cant even download the 10.6.2 now due to the harddrive appears to be full
View 2 Replies
View Related
Jan 25, 2010
Sometimes, when I turn on my iMac (10.6.2), the system will not load, you can see the grey screen but empty, no apple logo there. I have to force a shutdown pressing the power button and when I turn it on for the second time it will work properly.
It only happens once in a while but I cannot understand why, since nothing changes.
PS.- I have verified my disk with the disk utility and everything seems fine.
View 4 Replies
View Related
Aug 16, 2010
Hoping someone can help - my imac (approx 15-18 months old , intel) won't start.
Last night on shutting down DPP (canon Digital image software) was hanging and system asked me if I wanted to force quit it...sadly I had switched off my bluetooth mouse and , as usually once mouse turned off switching it back on it never re connects - why did I buy the bletooth mouse and keyboard ?, so I could not confirm yes force quit - is there no way of selecting with keyboard like there is in windows ?
So I switched off at power switch. Tried to re switch on - grey screen came up, apple logo, the little timer circle but after a while timer circle stopped and nothing further happened.
have tried several more times and now don't even get timer.
View 5 Replies
View Related
Dec 8, 2009
Well I have managed to get the g5 tower dual 2.5ghz to boot up to the grey screen with the apple logo then it shuts itself down.
View 1 Replies
View Related
Dec 2, 2014
My Macbook Pro is stuck at the loading screen with the apple logo and a spinning wheel!Â
I Have tried CMD and R. I have also tried the Option button...
Info:
MacBook Pro with Retina display
View 1 Replies
View Related
Oct 30, 2008
I had been using my iMac all night, when all of a sudden the bouncing beach ball appeared and everything became unresponsive, apart from the mouse cursor itself. It might be worth noting that a few hours prior to this, I plugged in an external hard drive to burn off a DVD. This external hard drive has two partitions, the first being a restored image of Leopard; and the second, my out of date backup ("yes, I know").
I subsequently restarted my machine, enjoyed the chime, pondered the excessively long start up and looked bemused at the Leopard Setup wizard. I realised that the restored Leopard partition had booted up instead of the internal disc. So, I unplugged the external drive, pressed reset on the iMac and was immediately greeted first by the reassuring chime, then by the Apple logo and a lingering grey screen and finally by a flashing dark folder icon with a question mark in the centre for eternity.
I tried rebooting a few more times. Same. I've been frantically Googling but only found the PRAM reset and a very frightening iMac disassembly guide. I've tried plugging the external drive back it, but it refuses to boot Leopard from that now. What can I do? I feel so helpless on a Mac, on a PC I'd at least be able to open the sucker up before panicking! I've been working on a client's flash web dev project for months, and not made a back up in about half that time. The website is supposed to be going live tomorrow! Luckily I have the site uploaded, but the entire source code is potentially lost, so in the long term this is a major catastrophe!
View 24 Replies
View Related
May 9, 2012
recently a friend of mine offered to update my 2009 MacBook to Mac osx Lion. when I received the computer back from him, it required a rather large update that has put my MacBook in a terrible state. Â
upon rebooting from the update, it froze at the grey Apple loading screen, and of course I thought nothing of it and gave it a little restart. Since then I cannot get it past the grey screen or the login window. it seems as though I cannot type in my password or click 'sleep' or any option the window gives me. I've been working on this issue all day, and I've tried countless things from the apple support community, with no avail. Â
I've tried clearing the cache, I've tried safe mode, I've tried the command+option+control+enter trick on the login page, I'm even trying to boot from the install disc my friend gave me...and it's just refusing to move past the grey screen. Â
Info:
MacBook, Mac OS X (10.7.3)
View 1 Replies
View Related
Mar 6, 2010
I am trying to install windows 7 on macbook air, through an external DVD drive, since USB didnt work for me. The DVD is detected and ounce I click start windows installation, the system boots and gets stuck at the gray boot screen with the apple logo. What is causing this? how can I solve this?
View 22 Replies
View Related
Jul 25, 2010
For several weeks, my black MacBook (2008) has been acting odd. Certain applications won't open, and when I attempt to open them, the computer makes a quiet clicking noise, like the drive is failing. Last week, when trying to boot it, the thing just wouldn't. Stuck on the grey Apple logo screen. Assuming a hard drive problem or failure, I ran the tests. I ran Disk Utility from the Snow Leopard install disk, checked & repaired permissions, checked & repaired disk. All okay. I ran the Apple Hardware Test from the install disk that came with the computer, using the test that runs for an hour or so, and all appears to be fine. The computer won't boot into safe mode. I've tried flashing the PRAM. I doubt I could achieve much through target disk mode, as I've already run Disk Utility. What's left to do? Something doesn't add up here.
View 1 Replies
View Related
Jan 12, 2011
I own an iBook G4. I could not get it to boot up, it would just go to a grey screen with the apple symbol and a timer/clock that looked like a gear.FYI: I may provide more information than necessary in the text below. I'm not sure what is and isn't relevant.
Following some advice I found in this forum I got out my old OS disks to boot from the disc instead of the hard drive. I intended to archive the old hard drive and install my latest OS (10.4.6 on the disc, 10.4.11 was the version I had been running on the machine, I believe). The machine told me it needed 4.5 Gb to install 10.4.6 Tiger, but I only had 4.0 Gb left on the hard drive. So instead, I archived and installed with the OS that came with the computer originally, 10.3.4.
I got things going, did the archive and install, and got to the log in screen. Unfortunately, I could not remember the password, so I booted up in single user mode, and entered the following to get into the machine:
1. mount -uw /
2. rm /var/db/.AppleSetupDone
3. shutdown -h now
This got me in with a new admin login, and I started up in 10.3.4. I soon noticed that I could still see all of the files that I put on the hard drive on my old operating system. I thought I shouldn't be able to see them, but since I could I decided to try to copy them to an external hard drive. When I did, I got an error message saying that there was a read/write error. I was not entirely surprised, but I decided it was time to turn back to the forums for help.
What I want to do is copy everything from my old hard drive onto an external hard drive, make room on the iBook hard drive to reinstall my latest operating system (10.4.6). Once I've done that I'd like to get the essential files back onto the iBook from the external hard drive and continue using my computer (even though it is a dinosaur).
View 1 Replies
View Related
Nov 23, 2008
I have had my MacBook for almost two years and the battery had just died on me. So I sent it back to Apple and got a new one. But ever since switching over to this new battery, my computer has had issues starting up. A grey screen fades into white and the Apple logo never appears. The computer will just stay like that for hours. A friend suggested turning the power off and back on, holding apple+ctrl+P+R, which worked.However, the next time I turned my computer on, the screen stayed white again, without an Apple logo. Can you tell me what the deal is? Should I bother reporting this to Apple? Is this permanent damage I'm going to have to go thru everytime I start me laptop?
View 1 Replies
View Related
Nov 8, 2009
OSX 10.4.11 (Tiger) PPC G4 733 MHz
My Tiger volume gets stuck when starting up, it doesn't get further then the grey screen with the Apple logo. The clock with stripes keeps working but it doesn't get me to the blue screen.
For compatibility reasons concerning different softwares i use (Protools, Reason etc...) i keep changing the internal HD's for years now, thus changing the OS's (10.3.9, 10.4.11 etc). Never caused any problem.
When i boot from another 'master' volume (f.e. 10.3.9) OR from the OSX install CD, putting the Tiger volume as 'slave', in order to verify its disk permissions or the disk itself to be able to repair them, it's 'invisible', not 'seen' by the other volume.
So no 'verify disk permissions' nor Combo Update possible, maybe those things could solve my problem.
My cables are working perfectly: making the exact same connections and jumper settings with all my other volumes, is no problem at all: every volume is correctly seen by the others.
Also, there is no USB or external firewire device connected while trying to start up.
Remark: never had any problem with this Tiger volume, starting problem only occured yesterday AFTER installing Toast Titanium (which worked normally), shutting down and trying to start up again.
Nevertheless, some minor problems occured beforehand these last days: some apps didn't work anymore, like Safari, itunes, installer and UnrarX. But i don't know if it's linked.
View 7 Replies
View Related
Mar 23, 2012
My power mac g5 has suddenly started to shut itself down in the early stages of boot up. The apple logo appears and the spinning timer logo spins befor a complete shut down.Â
I have used my o/s disc to access the disk utility. Repair disc is not an option. Verify disc is an option but this process fails due to " invalid nodes" Â
Info:
iPad 2, Mac OS X (10.5.8), G5 PPC 1.8ghz, iPhone4
View 9 Replies
View Related
Jan 14, 2011
I have Time Capsule and everything is backed up on there. My data is on a separate USB HD + Drobo, but for now I need my iMac to boot but it won't. It won't even get into the Desktop. all the guides online says double click the Install Icon this and that...I would if I can get into the Desktop !
It is just stuck on the Apple Logo screen with the spinny thing, that stops spinning!
View 2 Replies
View Related
Nov 27, 2010
My 3-month old iMac was responding very slowly when I used the latest version of Safari. So I forced quit the program. From then on, whenever I turned on the iMac, it would get stuck at the Apple logo start up screen. I had to unplug the power since the machine is getting very hot after 15 mins.
View 3 Replies
View Related
Jul 3, 2012
My 24 inch iMac is not getting pass the apple logo. It acts like it's loading, but then the little progress spinner (not sure of the name) stops spinning after 2-3 minutes. It never wants to get pass that. I'm running the latest version of Lion.
Here's the specs:
3.06GHZ
4GB
500GB
NVIDIA GeForce 8800 GS
So far I've tried using disc utility on my snow leopard disc....it doesn't load. I've tried to start in safe mode...it loads about half way and stops. Oddly enough windows xp works in bootcamp. It runs okay besides when I try to move windows. I'm guessing it's the graphics card. No idea really. Here is a video I made to show you what I mean: [URL]. I've also tried installing a new 1TB HD and it still won't boot from a disc for some reason. I tried install snow leopard through the internal superdrive and with an external superdrive. No dice.
Info:
iMac, Mac OS X (10.1.x)
View 2 Replies
View Related
Dec 5, 2007
This machine has been running fine. I installed ilife8 - had eyeTV running. It was slow, hanging, unhappy so I rebooted. It took a long time but eventually restarted - got the chime and after a few seconds the white screen/grey apple. No spinning wheel - no nothing. After a few minutes the CPU fans slowly go to full scream. Have to hold power switch to shut down. Won't go into single user mode, won't boot CD (can't even get the CD out of the machine, but the dvd never spins up). I've pulled all the memory except the original apple mem. I've tried my Kinston mem. There is nothing else in the machine that isn't pure apple.
Information:
G5 dual 2.5 up to date Tiger
Mac OS X (10.4.11)
View 13 Replies
View Related
Feb 9, 2012
Upon initial restart after installation, the grey screen with the Apple icon comes up and gets stuck there. I have tried to power down and get to disk utility to try repairing permisions but it always goes to the log on screen not the recovery mode. All user ID's get a pop up that says 'you are unableto log in to the user account'x' at this time. Logging in to the account failed because an error occurred. The spinning wheel spinns by the PW the whole time the error box is up but goes away when you click OK. It also knows if you put in an incorrect PW or not Have mac mini server 10.7 and an airport extreme the net was really slow at first on other nodes so I had to move to the guest net I cannot logon to the aitport cause it is single sinon enabled Worked yesterday not today after sleeping I can log onto my Wiki page with users though?
Info:
Mac mini, Mac OS X (10.7.2), server
View 2 Replies
View Related
