MacBook Pro :: Printer Software Installed But Drivers Not Appear In List

Aug 28, 2010

Bought a HP Laserjet Pro 8500 A909g. I have installed software but driver never appears in list so there is an option to manually select it. Sometimes the printer then appears and other times it doesn't. Message then appears: If your device is not listed it is not supported by this installer. Downloaded installer again from HP but still no good. Printer is wireless but was given USB cable to connect to Macbook Pro as don't have internet at home and was told it would be no problem. Message now appearing saying if USB port on printer is at front (mine is) do not connect to USB on Macbook. However, it doesn't bother to tell me how to connect it any other way. Nothing in manual. Running out of patience. Just starting working for myself and have clients waiting for designs which I can't even print off.

View 3 Replies


ADVERTISEMENT

OS X :: Installed Snow Leopard It Did Not Automatically Install The Updates For The Printer Drivers ?

Sep 1, 2009

For whatever reason, when I installed Snow Leopard it did not automatically install the updates for the printer drivers already installed in my computer.

I then tried to manually install the printer drivers using the SL disk and still no luck. The printers that I use are both wireless and work when they are connected with USB. Am I missing something? I'm reading all over about how people have made the upgrade with no problems at all so I'm there's got to be something I'm not doing.

View 3 Replies View Related

MacBook Pro :: Adding A Printer To Your Printer List In Mac OS X V10.5.8 Or Earlier

May 14, 2012

How can I add a Epson Stylus SX445w to my Mac Book Pro...This is the second one I've tried and failing miserably..I've installed poken to the help line at Epson and they say it's down to Apple.

Info:
MacBookpro

View 2 Replies View Related

OS X Mountain Lion :: Cannot Identify Compatible Print Driver From Dropdown List In Add A Printer List

Sep 7, 2014

I want to connect a wireless Epson XP 510 printer.  Installed drivers from the Epson website but they do not appear to be compatible according to the drop down list in the apple menu for adding a printer.

Info:
iMac, Mac OS X (10.5.8), Epson XP 501

View 1 Replies View Related

Windows On Mac :: New Drive Installed XP Installed Now No Drivers Or Internet?

Dec 5, 2010

Installed a new 750GB drive into my MacBookPro 5.1 Couldn't get Winclone to make image so I was forced to start from scratch with a new XP installation.

My MBP is partitioned 25%Mac & 75%XP with bootcamp and I have the old drive in a enclosure connected with a firewire. So all of old files are on the external drive now.

After installing XP I have no internet connection, drivers etc... However if I boot up on the mac side everything works fine. (I cloned the mac os already with Carbon copy).

So can I just copy all my old drivers over to the new drive? If yes how and if no how do I get them installed on the new harddrive. The MBP came with everything preinstalled.

View 9 Replies View Related

Hardware :: Unable To Install Drivers For Printer / Samsung CLX-3160fn Printer

Oct 29, 2010

Hi, my brand new iMac 21.5" (just 2 weeks old) does not have the appropriate driver for my printer. My printer is a Samsung CLX-3160fn. The iMac has lots of other Samsung drivers, including one that's close (for the 3170 series), but the close one does not work.

Went online to search for driver but was not able to find one for Mac. Does this mean my printer is just not compatible with my iMac?

View 8 Replies View Related

Hardware :: Unable To Install Dell All-in-one Printer / Can't Find The Printer In Drop Down List

Dec 8, 2009

I've seen previous discussions regarding problems installing a Dell printer. I have a Dell 962 wireless printer. I did find the compatible Mac driver R92834 and I did install the driver. However, when I try to add the printer, I can't find the printer in the drop down list. Am I supposed to be looking for a Lexmark printer? If so, I have no idea what model is equivalent to the Dell 962 AIO. The model sticker is 4409-0d1. A search for this model returns nothing. I'm a newbie with Macs. OS is 10.4.3. Got any ideas?

View 11 Replies View Related

Hardware :: Unable To Install Dell All-in-one Printer / Can't Find Printer In The Drop Down List

Jun 2, 2006

I've seen previous discussions regarding problems installing a Dell printer. I have a Dell 962 wireless printer. I did find the compatible Mac driver R92834 and I did install the driver. However, when I try to add the printer, I can't find the printer in the drop down list. Am I supposed to be looking for a Lexmark printer? If so, I have no idea what model is equivalent to the Dell 962 AIO. The model sticker is 4409-0d1. A search for this model returns nothing. I'm a newbie with Macs. OS is 10.4.3. Got any ideas?

View 7 Replies View Related

Intel Mac :: Delete Old Printer From Detected Printer List?

Apr 25, 2012

How do I delete an old printer from the Detected Printer List?

Info:
iMac, Mac OS X (10.6.8), early 2009 model imac 20 inch

View 2 Replies View Related

OS X V10.5 Leopard :: Adding A Printer To Printer List In Mac 10.5.8 Or Earlier'?

Jun 5, 2012

I have recently brought Apple MacBook pro 13 inch, iam trying to add my printer Hp laserjet 1018 ,but my macbook identified the printer but DID NOT PRINT. I did not understand why it did not print.

View 1 Replies View Related

MacBook :: Installed Vista But No Correct Bootcamp Drivers?

Oct 25, 2008

I left my Leopard Discs at home and will be away for about a month. I installed Vista but do not have the correct Boot Camp drivers. I was wondering if anyone knows where to find the newest drivers. I need the ones from the disc that came with the computer if anyone can put a link or upload them. Tried Boot Camp 2.0 and update from April to 2.1. Does not have the correct display drivers, trackpad, and network drivers.

View 6 Replies View Related

OS X :: Using Printer On Windows XP Network (Drivers For MacBook)

Mar 1, 2009

I just set up my printer on my home network, and it works with my two wireless PC's, and now I am trying to add it to my 3 macbooks, but I am having some trouble. I connected to it through system pref > print/fax > selected my printer. It connected and works sweet, but, the driver must be wrong. I was not sure what the driver was so I just chose GenericPostScript but when I print, a blank sheet comes out, no text. The PC's print just fine, but not my MacBook. It is a DELL printer connected to my dell PC, so I am not sure what driver to use. All I know is it is a Dell AIO 926.

View 2 Replies View Related

OS X V10.7 Lion :: Delete A Printer And Drivers From My Macbook?

May 9, 2012

how do i delete a printer and the drivers from my mac book

Info:MacBookPro, Mac OS X (10.7.3)

View 1 Replies View Related

MacBook Pro :: Unable To Uninstall Canon Printer Drivers

Dec 3, 2014

I just installed canon drivers which come in a bundle of unnecessary drivers and take up a lot of memory spaces

also every time i log into my mac it will have a pop up window as below:Do you want the application “ccpd” to accept incoming network connections?which bothering me alot and i decided to delete it and use back my old printer but i unable to undo it.I have been trying to reset my printer ( preferences -> printer and scan ) and also searching for the locale of driver in " library " but still in vain. how to delete the hidden drivers?

View 1 Replies View Related

Intel Mac :: Cannot Update MacBook Pro After Migrating, Also Cannot Download Printer Drivers

Apr 23, 2012

I recently migrated from MacBook pro to iMac. Now neither will update nor print. They see the printers on network but say I need to download software to print! When I try to download it gives me Network Diagnostics problem although it is connected! The same error appears when trying to update either computer!

Info:
iMac, Mac OS X (10.7.3)

View 3 Replies View Related

OS X :: Looking For Installed Update List?

Jun 18, 2009

I was shutting down my MBP and i noticed it started performing a software update. After that I powered it back up and tried looking for what update it had performed. I looked in the System Preferences/ Software Update/ Installed updates. Nothing listed in the updates. I fired up software updates and it found a bluetooth update. I figured i would install that and it should come up. I was wrong. Is there anywhere else in OSX 10.5.7 that i can see what updates have been installed.

View 1 Replies View Related

MacBook Pro :: Cannot Print On The VM Part (W7) Though The Printer Was Successfully Installed

May 18, 2012

I tried to add a local USB printer fro the W7 VM part. Installatioin work well, but the printer is not printing

View 3 Replies View Related

Mac Pro :: AHCI Drivers Installed And Still Not Booting Into Win7

Nov 5, 2009

I am not using any raid at all on my 2008 mac pro. All I want to do is achieve using SATA drives via the ODD ports on my logic board to boot windows. I know it can be done. In case you don't believe me, here is the PROOF that shows I have installed the AHCI drivers successfully in windows: Under IDE ATA/ATAPI controllers, the following exists:
Intel(R) 631xESB6321ESB/3100 Chipset Serial ATA Storage Controller, and underneath that says the following:
Intel(R) ESB2 SATA AHCI Controller.

That said, the matrix control console identifies all my 6 ports correctly. But when I go and hook up my SATA bootcamp hard drive to the ODD_SATA Port on my board, it doesn't boot! Why?? I went through all that trouble to install AHCI drivers in bootcamp annd it doesn't boot up at all? Yes, I would like to boot windows via ODD_Ports, but each time I do this it doesn't seem to boot. I am afraid to use a SATA optical drive, as the same thing will happen again. However, it appears that when I am in bootcamp, all my drives are recognized and working.

What do I need to do to get the ODD_SATA ports to recognize the AHCI during boot up(not while in Bootcamp)? I don't understand why it won't boot, after installing the matrix storage drivers for AHCI? I am leaving you with my skype id so you can chat with me on what to do here. Psychomacuser343 is my skype, while nadav333 is my AIM. As I said, I have tried everything, and while the ODD_SATA ports boot on the mac side, Even with the AHCI drivers in bootcamp, can't get bootcamp booted unless I remove it from the ODD_SATA port. Also, I managed to install one sata cable and not needing to mod my case fan.

View 24 Replies View Related

OS X :: Printer Drivers For 10.4.11?

Oct 12, 2009

I have just had to do a system reinstall on my iBook (G4 1.33MHz 512 RAM). I have updated Tiger to 10.4.11as it was available via 'software update'. I can't now print with my trusty Epson stylus color 740 or my Epson stylus photo 895.

When I go looking for drivers on the epson web site they seem to be for systems 7-9 for the 740 and for intel Macs running Tiger for the 895. Both of these printers worked fine with my previous version of Tiger.

View 6 Replies View Related

Windows On Mac :: Screen Became Really Dim / Installed Boot Camp Drivers

May 10, 2008

I have just finished installing Vista Ultimate (64 bit) on my new Mac Pro, and the screen is really dark, and I can't seem to get it any brighter.

My graphics card is the Nvidia 8800gt, I am using an old 23" ACD through the ADC/DVI adaptor.

The screen was nice and bright all throughout the installation, but after I installed the boot camp drivers from the Apple install disc, the screen became really dim. If I open the Nvidia control panel and try and change the brightness from there, the screen stays dim, but just gets really washed out.

The weird thing is, it translates back onto the OS X side. When I restart after being in Vista, the display is still very dim - I have to go in the Displays system preferences and manually change the brightness back up from minimum. Conversely, when I boot into Vista having been in OS X, the screen is initially bright through all the login screens, but then switches back to being dark as soon as I have logged in.

There is probably a really simple solution to this, but as I am completely unfamiliar with Vista, I'm stuffed if I can work it out. Any advice is gratefully received.

View 5 Replies View Related

Windows On Mac :: Drivers Doesn't Work When Manually Installed

Aug 5, 2009

All the drivers don't work, this is when I try to install via the BootCamp Windows Installer.

However if I manually install all the drivers it doesn't work?

PS. I am a complete newbie at MAC.

View 2 Replies View Related

Applications :: Installed Windows 7 On Parallels 5 - ATI 4850 Drivers?

Mar 24, 2010

Im new to the mac, 48 hours now!! Loving it so far.

Ive installed Windows 7 on Parallels 5. Do I have to install ATI 4850 drivers to get aero working?

View 3 Replies View Related

Mac Pro :: Uninstall NVIDIA Drivers From System / Installed ATI 5770?

Dec 18, 2007

I have removed my GTX 285 for Mac from my Mac Pro and replaced it with an ATI 5770. How do I remove all things NVIDIA from my Mac now?

View 2 Replies View Related

OS X :: Shrinking Printer Drivers?

Jul 15, 2008

Is it even technically possible to shrink that 2GB of Printer drivers down?

Surely they have A LOT in common.

I am wondering if this would / could be done for Snow Leopard.

View 9 Replies View Related

OS X :: Printer Drivers Using Almost All Resources

Dec 7, 2008

I recently installed the widget iStat Pro. When i did, i discovered that the (what i presume to be) drivers from my printer are using up all of my processes. In the processes tab, it can go anywhere from 90% to +100%. I have nothing in my login items but iTunes helper and absolutely nothing in the start items. I don't know what to do about this.

View 1 Replies View Related

OS X :: Copy Printer Drivers From One Mac To Another?

Jan 10, 2011

I have quite a few printer drivers on my MacBook� USB printers, an AirPrint printer, a printer made AirPrint-compatible via Printopia, a printer hooked up to my AirPort Express, and printers at my university's library that go through the campus wifi connection. Rather than set these up from scratch, I was wondering if there was an easy way to transfer the printer settings from one Mac to another (but not transfer other documents or settings).

View 1 Replies View Related

OS X :: Finding HP Printer Drivers For 10.5.8?

Jan 13, 2011

I have a Macbook with 10.5.8 on it, and I installed a driver for my HP Deskjet 5740 printer, but it doesn't give me all the options I used to have (such as grey scale or fast draft).

In reading through the forums I think there is a different driver that I need perhaps? I've tried deleting and re-adding the printer, and re downloading the driver as well.

I've seen some people have solved the problem with Linux drivers for other printers, but I have no idea how this works.

View 3 Replies View Related

OS X :: Can't Install Printer's Drivers?

May 22, 2009

I installed leopard after upgrading the hard drive, didnt install any printer drivers, ive just found a 3gig printers folder in Library/Printers, whats happening?

View 3 Replies View Related

OS X :: How To Uninstall Printer Drivers

Sep 14, 2009

I have a macbook and I wanted to install my old Lexmark 4300 series printer to it. It wouldn't work with Leopard but it did work for Tiger. So I put the Mac OS X install disc in and did the optional installation, but instead of installing just the lexmark drivers I accidentally installed all of the printer drivers. I want to get rid of all of them but don't know how. I can't find them under applications or the hard drive. I can only pull them up when choosing a driver out of the driver menu when hooking up the printer.

View 1 Replies View Related

OS X V10.7 Lion :: Printer Drivers Is Not Available

Feb 14, 2012

I have a Canon Pixma Printer MP250 how do I get it to work with my Mac. The Canon site tells me this model should be picked up in the software upgrades from Apple though when I check Apple the MP250 isn't listed??

Info:
iMac, Mac OS X (10.7.3)

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved