Mac Pro :: AHCI Drivers Installed And Still Not Booting Into Win7
Nov 5, 2009
I am not using any raid at all on my 2008 mac pro. All I want to do is achieve using SATA drives via the ODD ports on my logic board to boot windows. I know it can be done. In case you don't believe me, here is the PROOF that shows I have installed the AHCI drivers successfully in windows: Under IDE ATA/ATAPI controllers, the following exists:
Intel(R) 631xESB6321ESB/3100 Chipset Serial ATA Storage Controller, and underneath that says the following:
Intel(R) ESB2 SATA AHCI Controller.
That said, the matrix control console identifies all my 6 ports correctly. But when I go and hook up my SATA bootcamp hard drive to the ODD_SATA Port on my board, it doesn't boot! Why?? I went through all that trouble to install AHCI drivers in bootcamp annd it doesn't boot up at all? Yes, I would like to boot windows via ODD_Ports, but each time I do this it doesn't seem to boot. I am afraid to use a SATA optical drive, as the same thing will happen again. However, it appears that when I am in bootcamp, all my drives are recognized and working.
What do I need to do to get the ODD_SATA ports to recognize the AHCI during boot up(not while in Bootcamp)? I don't understand why it won't boot, after installing the matrix storage drivers for AHCI? I am leaving you with my skype id so you can chat with me on what to do here. Psychomacuser343 is my skype, while nadav333 is my AIM. As I said, I have tried everything, and while the ODD_SATA ports boot on the mac side, Even with the AHCI drivers in bootcamp, can't get bootcamp booted unless I remove it from the ODD_SATA port. Also, I managed to install one sata cable and not needing to mod my case fan.
View 24 Replies
ADVERTISEMENT
Mar 8, 2009
I have tried installing the RealTek drivers on Windows 7 in BootCamp. I get sound, but its all fuzzy and unclear.
View 2 Replies
View Related
Nov 30, 2009
I installed Windows 7 and Bootcamp (Leopard) on my brother's late model White Macbook. Everything SEEMED ok, but now he tells me there is no sound. I don't have the laptop with me, but I had him dig through the installed drivers, and it seems there is a driver installed for the external audio jack, but no driver installed for internal speakers.
View 1 Replies
View Related
Dec 5, 2010
Installed a new 750GB drive into my MacBookPro 5.1 Couldn't get Winclone to make image so I was forced to start from scratch with a new XP installation.
My MBP is partitioned 25%Mac & 75%XP with bootcamp and I have the old drive in a enclosure connected with a firewire. So all of old files are on the external drive now.
After installing XP I have no internet connection, drivers etc... However if I boot up on the mac side everything works fine. (I cloned the mac os already with Carbon copy).
So can I just copy all my old drivers over to the new drive? If yes how and if no how do I get them installed on the new harddrive. The MBP came with everything preinstalled.
View 9 Replies
View Related
Dec 19, 2009
I grabbed a new i7 iMac, and have found the Bootcamp drivers to be lacking, mainly causing display driver crashes. I just loaded up the newest from ATi, but its too soon, to tell if that fixes it. I'm considering returning the iMac and getting a Mac Pro instead. Just curious if this problem still persists on the Mac Pro or not in Windows 7. And if I get full driver access control, as you would with a typical PC? (I noticed that Catalyst Control Suite on the iMac doesn't install, it will only install the drivers, so no fine-tuning access the Control Suite typically affords you)
View 1 Replies
View Related
Dec 28, 2009
I am new to Mac etc. I just installed Windows 7 Ultimate 64-Bit on my Macbook White latest edition with Snow Leopard 10.6.2 and Bootcamp. I run Windows 7 fine, but I want to install drivers from the OS X CD, but when I put it in the laptop, I get some weird messages as: Remote Install OS X - Install CD/DVD Sharing - It should be a bootcamp program that should show up, I've heard. I cannot get wireless network, etc.
View 1 Replies
View Related
Jan 10, 2009
seem to have a problem booting from my install DVDs of either Vista or Win 7 64-but editions on my MBP (santa rosa era I believe). Basically when I attempt to boot instead of getting the usual 'Press any key to boot from DVD' message, I get a menu appears like the following....
1:
2:
Please select CD-ROM boot type:_
And it just sticks on there, keyboard doesn't respond at all and probably wouldn't do anything useful anyway since both options are completely blank so I have no idea what it is asking me to do. My Vista disc is a genuine original, my Win 7 disc is burned from the latest MS Public Beta, both do exactly the same thing.
View 23 Replies
View Related
Oct 31, 2009
I've tried looking all over and am totally confused with what works with what and how to do it. I am looking at installing windows 7 x64 on either the lower spec 13inch macbook pro, or the lower spec 21.5inch imac. Installing windows 7 itself is so easy, but how do i get the drivers installed and which work? I know I should use the bootcamp drivers for vista off of the OS X disk but is it as simple as inserting the disk, navigating to the folder and running whatever? And does everything work for both the systems I mentioned? Including sound etc., and if not, how do I get it to work.
View 5 Replies
View Related
May 4, 2010
Standard bootcamp drivers are quite old so I went to upgrade the drivers from nVidia.com; I noticed that nVidia doesn't support the 330M under its driver page, am I to assume the 330M is an Apple specific part? Will nVidia support the 330M in an upcoming release?
View 1 Replies
View Related
Jul 2, 2010
I have MacBook Pro 5.5 MacOsX Ver 10.6.4 with Windows 7 64 bit installed via Boot Camp. The instructions clearly indicate I need to update Mac Drivers for Windows. I have no idea where to install the drivers, on the Mac side or on the Windows side. I tried to install the driver updates for Windows 7 64 bit on the Mac side and when I clicked on the down load the preview window was garbage gobbi speak.
The only thing legible in English was at the top it said for Windows 32 bit. I clearly clicked twice on the download link for 64 bit. Before I go any further would someone be kind enough to direct me to the proper install for the drivers telling me which partition to do the updates, Win side or Mac side? I installed Win7 from a new install. This was not an upgrade disc. Also have Office 2010 installed.
View 9 Replies
View Related
Dec 21, 2010
Whether it is possible have a harddisk installed with Windows (say, Windows 7 or XP) and use it to boot directly on a Mac? That means, a single external removable harddisk installed with Windows which can be booted on both PC and a Mac. Is it possible to simply take a Windows installed harddrive and boot it on the Mac? And after using it on the Mac, the same Windows harddrive can be booted on a PC again?
I do understand that Parallels has Transporter, but what I do know is that it is some sort of "migration". Once "migrated", the Windows cannot be booted on a PC again. Am I right? (So, this solution won't work.) My scenario is that I use a Mac at home, but I need to boot into Windows to do some office work (of course, using my Mac). This Windows on an external harddrive must also be bootable on a PC whenever I bring to work in my office.
View 2 Replies
View Related
Nov 7, 2010
I finally got my HDD partitioned and BootCamp Assistant to work correctly, I insert my Windows 7 disc, and it starts installation, but then stops and says it needs CD/DVD drive drivers, and to please insert floppy/usb/cd/etc. with the drivers. However, I can't eject the CD to insert my Snow Leopard disc and can't find the drivers poking through the SL CD to put on an external or flash drive.
View 2 Replies
View Related
Nov 19, 2010
I can't get VMWare to install their tools that supposedly helps with the Win7 drivers. However, i have the Win7 drivers for my MBA from a previous attempt to install Boot Camp. They are in my MBA dowload/drivers folder and on a USB thumb drive. But the VMWare install won't look at either. It only wants to look in 3 places.
A: floppy drive (haven't had one in many years)
CD drive D: VMWare tools (which is no help at all)
Boot X: drive
View 2 Replies
View Related
Nov 22, 2010
I haven't actually done this. I just want feedback. We have a 'universal' ghost image of Windows 7 at work that we've created that works with all our computers (has all the drivers for computers we support). I'm looking to piggyback that image and just add in the BootCamp drivers. However I'm curious to know:
-Which BootCamp drivers would I be adding to the sysprep drivers folder? BootCamp 3.0, 3.1 or 3.2?
-Would the drivers be enough or does Windows actually need the BootCamp software installed?
-If BootCamp needs to be installed in its entirety, is there a way to have BootCamp silently install upon boot? More importantly, is there a way to install BootCamp 3.2 without having to go through 3.0 -> 3.1 -> 3.2.
View 3 Replies
View Related
Jan 13, 2010
So I've finally got all the partitions sorted out from my previous OS setup, and go to install Windows 7. Partway through the setup (just after asking language) it asks for CD/DVD drivers. Okay, I'll try eject the disk. Nope, eject key not working. So I can't put the disk with all the drivers in. I'll copy the drivers to my external HDD. When I browse for them, I am told there's nothing there. So, I don't know. I can't install the drivers it would seem (unless someone can find the CD/DVD drivers for windows?) and therefor cannot continue with the installation because it wont let me click next until these damn drivers are installed. Windows 7 64 bit, by the way.
View 4 Replies
View Related
Jul 3, 2010
I don't have my CD/DVD for the drivers. Can any1 provide me with the latest drivers I can download from the internet.
View 3 Replies
View Related
Dec 2, 2009
I'm really new to OS X and macs in general. I just got the new macbook and I have Win7 professional 32bit on a dvd(legal). I have created a partition in bootcamp but every time it tries to boot from the dvd a black screen comes up with a flashing white cursor and thats it. Can anyone help me please as i really need win7 soon for college assignments.
View 2 Replies
View Related
Sep 9, 2010
So I am putting Windows 7 on my MBP, so I can play FFXIV, and I noticed I don't have the install disk for my MBP, so that I can install the drivers for the laptop. Is there somewhere I can download these onto a USB and then install them in WIN 7 from my USB drive?
View 2 Replies
View Related
Nov 4, 2010
Got a MBP i5, installed win7 pro on it, tried to install the bootcamp driver from the provided disk, after the install and restart it would crash during windows bootup, I manage to restore it to get back to windows. There is blue screen that pops up for a second, cant seem to read the code though. So far I've manually install some of the basic drivers like sound and videocard, but would like the bootcamp options in the control panel, what should I do?
View 8 Replies
View Related
Nov 24, 2009
I installed Windows 7 64bit on a boot camp partition on my new Macbook. I remember when I installed Boot Camp 2 on my iMac, it allowed me to burn a cd with all the drivers. There was no option for that this time around. I want to be able to use my multi-touch track pad and I just can't seem to find out how to do it? With the last version everything just worked and took me step by step, whereas this time, I'm a little confused.
View 12 Replies
View Related
Jan 17, 2010
Since Apple is releasing new Bootcamp drivers sometimes within the next couple of months, should I wait for it, and only install Win 7 in Bootcamp then? Or will it be pretty much the same if I install it now, and simply update Bootcamp when the time comes? What I mean is, could the current drivers have any adverse effect on the installation of Windows 7? If so I would rather not install now. But if not, I might as well install it now and just update the Bootcamp drivers once Apple releases them - will it be the same?
View 2 Replies
View Related
Jul 4, 2010
I'm trying to install Windows 7 Ultimate 64 bit on my late 2008 MacBook Pro and everything went smoothly until it came time for me to pop in my Snow Leopard disk and install the drivers. When I put the disk in I get a window called "Install Assistant" that has two options: "Remote Install Mac OS X" for MacBook Air computers and "DVD or CD Sharing" again for MacBook Air computers. This doesn't seem right. Shouldn't I get a window that lets me install the necessary drivers for Windows 7? I've also tried my 10.5 Leopard disk with the same result. I have also tried downloading the BootCamp 3.1 update, but when I attempt to install it I receive a message telling me that in order to install Boot Camp 3.1 I need to have BootCamp 3.0 or higher.
View 3 Replies
View Related
Aug 20, 2009
so i just installed bootcamp windows 7 ultimate 7600 x86 retail on 100gb partition and for some reason when i try to install the bootcamp drivers off the install OSX cd it brings up a installer assistant for remote macOSX install and macbook air cd/dvd sharing (it looks like as if its recognizing my mbp as a mba). so that didnt work. im trying to install boot camp update 2.1 for windows vista 32 bit and thats not opening up to install....the only things ive installed so far are the nvidia 9M series drivers.
View 2 Replies
View Related
Feb 9, 2009
This will outline a simple and easy method to install the windows 7 build 7000 to a boot camp partition, using only vmware fusion 2. This is novel because it can be accomplished without a superdrive and without burning a dvd.
1. Use boot camp assistant to make a windows partition.
2. Mount the windows .iso file in fusion and set the bios (F2 during virtual machine boot) to boot from the virtual dvd-drive.
3. Run the windows install
4. When windows wants to restart the first time, shutdown the virtual machine.
5. Reboot the mac and boot the windows partition, boot camp style.
View 11 Replies
View Related
Oct 1, 2009
I've had my iMac for just under a week now, and I wanted to play some games, so I did a Time Machine backup, and ran BootCamp. Vista install disk wouldnt work, so I used my copy of the Windows 7 RC1 32bit. That worked fine, its installed and working just fine, but when I went to check what it would show under "System" in the control panel, it shows my memory as 4.00GB and says 2.73GB useable. Is this normal? I know that 32 bit cuts off memory at around 3.23GB, and I was under the impression with Windows 7 and Vista SP1 the limitation was supposed to be moved to 4GB. Is this something I should be worried about? Also, I get some really bad lag spikes on Windows.
View 15 Replies
View Related
Jan 9, 2009
I've been successfully running Leopard on 2 different drives on the following computer
G-4 (digital audio) 733 {model before Quicksilver}
upgraded to 1.47 GHZ....processor. 1 gig of memory
Computer has been handling Leopard fine up to now. I was updating one of the drives to 10.5.3 when the screen activity locked up. After quite a long time and ceasing of drive crunching data....I did a hard restart. Since this time, the drive wont start up,. just the spooling rotor underneath the apple on the gray screen, which doesn't stop. There is no time-machine backup on this drive. I've used the Leopard install disc to run the disc utility and repair permissions but this is a case of an update, half installed. Of course, with Leopard, booting with the install disc does not show the drive, disc image on the desktop...so access for re-running the update isn't there.
View 2 Replies
View Related
Aug 28, 2010
Bought a HP Laserjet Pro 8500 A909g. I have installed software but driver never appears in list so there is an option to manually select it. Sometimes the printer then appears and other times it doesn't. Message then appears: If your device is not listed it is not supported by this installer. Downloaded installer again from HP but still no good. Printer is wireless but was given USB cable to connect to Macbook Pro as don't have internet at home and was told it would be no problem. Message now appearing saying if USB port on printer is at front (mine is) do not connect to USB on Macbook. However, it doesn't bother to tell me how to connect it any other way. Nothing in manual. Running out of patience. Just starting working for myself and have clients waiting for designs which I can't even print off.
View 3 Replies
View Related
May 10, 2008
I have just finished installing Vista Ultimate (64 bit) on my new Mac Pro, and the screen is really dark, and I can't seem to get it any brighter.
My graphics card is the Nvidia 8800gt, I am using an old 23" ACD through the ADC/DVI adaptor.
The screen was nice and bright all throughout the installation, but after I installed the boot camp drivers from the Apple install disc, the screen became really dim. If I open the Nvidia control panel and try and change the brightness from there, the screen stays dim, but just gets really washed out.
The weird thing is, it translates back onto the OS X side. When I restart after being in Vista, the display is still very dim - I have to go in the Displays system preferences and manually change the brightness back up from minimum. Conversely, when I boot into Vista having been in OS X, the screen is initially bright through all the login screens, but then switches back to being dark as soon as I have logged in.
There is probably a really simple solution to this, but as I am completely unfamiliar with Vista, I'm stuffed if I can work it out. Any advice is gratefully received.
View 5 Replies
View Related
Oct 25, 2008
I left my Leopard Discs at home and will be away for about a month. I installed Vista but do not have the correct Boot Camp drivers. I was wondering if anyone knows where to find the newest drivers. I need the ones from the disc that came with the computer if anyone can put a link or upload them. Tried Boot Camp 2.0 and update from April to 2.1. Does not have the correct display drivers, trackpad, and network drivers.
View 6 Replies
View Related
Aug 5, 2009
All the drivers don't work, this is when I try to install via the BootCamp Windows Installer.
However if I manually install all the drivers it doesn't work?
PS. I am a complete newbie at MAC.
View 2 Replies
View Related
