MacBook Pro :: Cannot Print On The VM Part (W7) Though The Printer Was Successfully Installed
May 18, 2012I tried to add a local USB printer fro the W7 VM part. Installatioin work well, but the printer is not printing
View 3 RepliesI tried to add a local USB printer fro the W7 VM part. Installatioin work well, but the printer is not printing
View 3 RepliesI installed Snow Leopard, it did it's thing (took about 30 min) then restarted. My question is how do I know if it took? I can't see anything different at all, which may be the case, but is there a place to look and see if my OS is now Snow Leopard?
View 7 Replies View RelatedBought and successively downloaded os x lion on my Mac, but does not show as installed
Info:
iMac (21.5-inch Mid 2010), Mac OS X (10.7.3)
my macbook pro wont connect to the printer properly. sometimes it connects and it prints for a few days but most of the time it wont work. it says that it is connected but when i try to print it says printer offline. how do i connect it to the prtiner permanently?
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.4)
I'm new to Mac OS X, but have been working with Linux for almost 9 yrs now. I have set up a Linux box with CUPS 1.3.9. I can print from the server, and from other Linux stations to that remote server. However, I can't print from a client MacBook.
I set up CUPS on the client Mac via http://localhost:631 and created a printer associated with the remote queue / printer on Linux (the URL I use on OS X is http://mylinuxserver:631/printers/hpprinter and the driver is RAW).
I have no problems sending a test page from the CUPS web interface on Mac OS X to the Linux server -- the test page gets printed OK. However, I can't see the printer I just defined from other Mac OS X apps, and neither can I see it from the Add Printer Dialog on System Preferences (it's empty).
I tried creating the printer at the Add Printer dialog, but it would neither let me specify an HTTP URL (as far as I know, I had to use the IP icon on the toolbar) nor specify "RAW". So I tried creating a "dummy" printer in the Add Printer dialog, with a basic config, and then changing it from the CUPS web GUI. This didn't work either, since when I went back to the Add Printer dialog, the printer was gone.
I'm new to Mac OS X, but have been working with Linux for almost 9 yrs now. I have set up a Linux box with CUPS 1.3.9. I can print from the server, and from other Linux stations to that remote server. However, I can't print from a client MacBook.
I set up CUPS on the client Mac via http://localhost:631 and created a printer associated with the remote queue / printer on Linux (the URL I use on OS X is http://mylinuxserver:631/printers/hpprinter and the driver is RAW).
I have no problems sending a test page from the CUPS web interface on Mac OS X to the Linux server -- the test page gets printed OK. However, I can't see the printer I just defined from other Mac OS X apps, and neither can I see it from the Add Printer Dialog on System Preferences (it's empty).
I tried creating the printer at the Add Printer dialog, but it would neither let me specify an HTTP URL (as far as I know, I had to use the IP icon on the toolbar) nor specify "RAW". So I tried creating a "dummy" printer in the Add Printer dialog, with a basic config, and then changing it from the CUPS web GUI. This didn't work either, since when I went back to the Add Printer dialog, the printer was gone.
I'm using a MacBook, Mac OS 10.5.8. I've downloaded the driver for HP LaserJet m1319f MFP and the printer worked fine when I connect it directly to my MacBook (using USB connection).The problem is that printer is supposed to be connected to our office network users through a TP-Link Print Server (TL-PS110U). I've tried to use AppleTalk to connect to that print server but my MacBook only recognized that HP printer as a HP Fax machine and I can't print anything.
View 6 Replies View RelatedThe Excel program I'm trying to print Excel 2008, Microsoft Office 2008, identifies the problem as a 'driver' issu and thus will not print the spreadsheets.
Info:
iMac, Mac OS9.1.x
I was having problems printing from my Canon LBP6000. Print jobs remained held in the queue. I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement. The printer works fine with my Windows laptop. I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed. I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options. And no idea how to get printer options.
Info:
Mac mini, Mac OS X (10.7.3)
Printer won't print, printer queue won't open?
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
I can't print to an HP printer from a 3 yr old Mac Book Pro. The printer works fine with an Air.
Info:MacBookPro
why can't I print a PDF from my mac pro to my printer?
Info:
MacBook Pro, iOS 5.1.1
I have a 2010 MacBook Air with Lion system software. I connect to my Window XP computer at home to get on the network with no problems. I have an HP Printer and cannot figure out how to connect to via the network.My previous PC notebook was able to connect and print via the network.
Info:
iMac, Mac OS X (10.7.3)
My MacBook, 5,1; OS 10.6.8 can't seem to print directly using my Canon Pixma MP 640htheÂ
It can find the printer as an IJ device via LAN, and it will tell me that the print job is being sent and that it has printed but nothing comes out. Same result when i connected it via USB cable. Have tried installing/reinstalling drivers from Canon and even once got it to print a test page. Â
Info:
MacBook, Mac OS X (10.6.8)
I have a macbook running 10.5.8 and used to be able to print to the network connected (wired) HP Photosmart 6180 printer until recently. I installed a new driver as part of the trableshooting steps and while I can print a test page and see the status of the printer, I can't print from any applications like Word. I've tried all of the t-shooting steps I can find. What am I missing. The job acts like it's going to print and then the printer queue icon bounces with a caution symbol in front of it and the queue says connecting to print on port 631.... printer busy will try connecting again in <> seconds and there is nothing printing to it and the printer is silent.
View 1 Replies View RelatedI've installed the print drivers on my MacBook Pro(Mac OS x10.7.4) for my Brothers MFC-7820N and I still can't print. The printer is connect via ethernet and wireless.
Info:
MacBook Pro, Mac OS X (10.7.4)
I'm trying to print to my wireless Epson Stylus NX430. I want to print in grayscale- when I print something the print que pops up and with an error saying, "looking for printer." The printer is connected to my wireless. What can I do?
Info:
MacBook Pro (13-inch Late 2011)
My HP 4480 printer shows up on my MacAir but won't print. It is connected by a usb cable. I have tried powering off and on the printer to no avail!  I have installed the latest driver for Apple Mac as well.Â
Info:
MacBook Air
Bought a HP Laserjet Pro 8500 A909g. I have installed software but driver never appears in list so there is an option to manually select it. Sometimes the printer then appears and other times it doesn't. Message then appears: If your device is not listed it is not supported by this installer. Downloaded installer again from HP but still no good. Printer is wireless but was given USB cable to connect to Macbook Pro as don't have internet at home and was told it would be no problem. Message now appearing saying if USB port on printer is at front (mine is) do not connect to USB on Macbook. However, it doesn't bother to tell me how to connect it any other way. Nothing in manual. Running out of patience. Just starting working for myself and have clients waiting for designs which I can't even print off.
View 3 Replies View RelatedI bought an Epson C2800N which is a network laser printer. It is connected to my router with "ethernet" cable. I am able to connect to my printer over cable connection (when i have my MPB network connection with "ethernet" cable) but when I use the wireless connection (airport) I can't connect to my printer. It happens with my MBP17 and my bro's MBP15'.
View 5 Replies View RelatedI'm trying to print a legal size 4 page document. The first page printed then the printer stopped. I've tried repeatedly to print page 2, but it never gets beyond the 'sending print data'. I tried deleting the job but it didn't go away. I finally had to shut down my MacBook and the printer, then restart them and the job was gone. But I still get the 'sending print data' when I try to print page 2.
Info:MacBook, Mac OS X (10.6.8), This is not a wireless printer.
My Mac is not seeing my wireless HP printer when trying to print a Word document. I can print from other Microsoft apps (excel). This only started happening yesterday afternoon.Â
Info:
MacBook Pro, Mac OS X (10.7.4)
I am using my HP DeskJet F4500. I connected it to my MacBook Pro 13inch mid 2012. i Added it and then i tried to print something out it doesn't print. I've went to the  printer queue and i found nothing. I really need to print stuff for my homework and projects.
Info:
MacBook Pro (13-inch Mid 2012), OS X Yosemite (10.10.1)
I have a Macbook air and my printer is a canon 6150.Â
When I go to print it doesn't always print out properly when I am using word and adobe pdf files. It seems to print ok when I open documents in preview.Â
I have been on the phone to canon and reinstalled the printer drivers and tested the printer by doing a colour copy and printing on my phone. Both of these work. As these work the cannon dude says its something to do with the setting in my computer rather than an issue with the printer.Â
My HP 5150 Colour Desk-jet printer will only print in black when using my new Mac Book Pro, it worked ok on my lod Macbook.Â
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.4)
Cannot communicate with the printer, or the printer is not supported. If the printer is supported, check the printer connection and add it again. Then, if the Print dialog box has a [Printer Info] button, acquire the printer information.: 10322
Info:
Mac OS X (10.7.4)
First, I'm a noob on MACs so forgive the nooby nature of the question.
I'm setting up a printer on a Macbook to use a printer shared from Windows 7. Followed the tutorials I found for the network side of things and that seems to be fine (Mac send unprintable files to the Windows print queue).
The problem is the print driver on the Mac. The printer is a HP PSC 1315. It's not on the list when you Select Drivers during printer setup and even after loading the HP 111 updated, still no joy.
I downloaded the 1315-specific driver package and ran the installation but I have no idea how to find the driver to use during printer setup.
Made a custom TCP/IP port on the PC. Assigned my Mac's IP address 192.16.1.101 as the location of the printer. Made sure protocol was set to RAW. Everything should work but the print job never makes it to the Mac. The print que on the PC shows error and the print que on the Mac never shows anything. I decided to delete all the printers on the PC, plug it in directly to the printer via usb and let it install the drivers, print test page etc... After that I reconnected the printer to the mac, pc to the network and just changed the port on the printer properties to reflect the IP address. It still didn't work. I can't seem to find any more information on what to do next. The PC is running Win XP and the Mac is on Leopard. Another thing, how does the PC know which printer to use if the Mac has two attached? I disabled sharing on the other printer thinking the PC might have been confused.
View 2 Replies View RelatedI can't seem to figure out how to add a printer, everything on the printer is setup. I can see the printer in my network (see photo, it's the EXROX-ALLINONE), but when I add it, it won't print anything, just waits and waits. I do know the internal ip for that printer if that helps.
I don't get how I can see the printer when I add it, but it just won't print.
I just installed 10.5.3 and now my HP Laserjet P10006 wont print anymore...when I look at the print window the file loads but then after a few seconds its stops.
I've tried printing from Acrobat and preview to so avail. I installed the new 1.0.5 HP driver and still no luck.
The printer is connected and works as I've sent test prints through no problem.
So is this a 10.5.3 problem that has arisen or is it something on my side I am overlooking?