The optical drive on my 17mpb will read and play any DVD I put in just fine, but when it comes to everything else it will not read or write. The drive whirrs around and then spits the media back out.
Info:MacBookPro, Mac OS X (10.5.8), lion
I recently borrowed my brother's laptop to use as a media station for listening to music from, and watching movies, in order to free up some space on my main macbook. In trying to migrate some files over, I discovered that my hard drive, a 320 GB WD Elements drive, is having some problems which I've never encountered before. It has always worked fine in the past, but now I can't transfer any files to or from it, from either computer. In all of my troubleshooting, I've gotten various errors, (-36, -50), and various messages saying how the device can't be read or written from, or how some files contian unreadable data, etc.Disk Utility found an unused node when verifying the disk, and notified me that the disk needed to be repaired.I then used Disk Utility, which said it was able to successfully repair it, but the same problem remains, and after verifying the disk, it still says it needs to be repaired.I've tried to find any files that may be causing the problem, and was finally able to delete a seemingly troublesome file that was stuck in my trash bin from the external drive after trying various apps, (ie Trash It, Cocktail, What's Keeping Me?).This didn't end up solving anything...I've used terminal to eliminate some other potentially problematic files, with no luck still, and I'm not too confident with Terminal so I don't want to be messing around too much without more guidance.
I've used Disk Warrior to try to solve the problem, but still with no success.When I use the app to Check All Files and Folders, it does so for only a few seconds, then reports that "An unexpected error ocurred while attempting to perform file operations" for several files, and that several files' "Property list is damaged and cannot be repaired". When using Disk Warrior to REBUILD the drive, the app pauses for about 15 seconds, then says that it can't be rebuilt because it is in use.Again, I've used the What's Keeping Me? app to kill any activity with the drive, and the same error occurs.I've spent a lot of time trying to sort this out.
Info:
MacBook, Mac OS X (10.7.3)
I have an early 2009 macbook, with 320 GB hard drive and running OS Lion, after i upgraded my os to lion, the computer ran perfectly normal, although a little bit slower than running snow Leopard. However, recently I notice my mac become very slow, got rainbow wheel even when i open the safari. then I use the black magic to test the hard disk speed, it appears the read and write speed is only a little over 30mb/s.
i have recently change my keyboard at apple store, I notice my mac slow down after that, do you think it would related?
Info:
MacBook, Mac OS X (10.7.1)
I have an external hard drive(seagate 250 NTFS format) which i have used on my windows 7 computer now that i'm trying to load the information onto my macbook pro (10.7.4) it will not let me change the permissions nor duplicate the files. How can I be able to edit and save the information to my mac from the external drive??
Info:
MacBook Pro, Mac OS X (10.7.4)
When I connect my external hard disk (Maxtor) to my Mac Book Pro, I am not able to copy/transfer files to it, though I can copy from it to my Mac. How do I change the permissions from Read Only to Read and Write?
Information:
MacBook Pro
Mac OS X (10.5.6)
I cannot put files in my flash drive for some reason. How do I change this setting? My flash drive format is Windows NT File System (NTFS).
View 6 Replies View RelatedWhat is the standard tool to test your hard drives read/write speeds? I'd like to test my new SSD to see how fast it really is. I've heard you cant trust XBench for that which is the only thing I have to use.
View 4 Replies View RelatedMy Mac Pro came with a 500GB boot drive when I ordered it 3 years ago. It has been used most days and now runs Snow Leopard (for scanners and a canopus video box that don't work with Lion) and Lion. I did a write & write test on the drive recently at both were approx 60 - 65 MB/s. I have another drive in my machine I bought last month, replacing an WD drive that failed in less than 18 months. This new drive (complete same as replacement is a WD Caviar (Black) 1TB 64Mb drive. This drive tests at speeds for 110MB/s. This may seem an obvious question, but will I notice much difference if I swap the drives around and have the newer drive as my boot drive. Also, does having two OS on a HD slow the drive down also?Â
Info:
Mac Pro, Mac OS X (10.7.3)
I just had the hard drive replaced in my IMac and it only at 1 to 1 or maybe 2 to 1 speed. my old one did over 10 to 1. car it be speeded up? Any way to get hard drive to read/ write faster?
Info:
iMac, Mac OS X (10.7.4)
i had a External Harddrive.Currently i can Read//Write on it in Windows PC(Windows7)But when i use the same drive in Mac i can only read...but can't able to write. How to resolve this issue
I bought a Seagate Free Agent Go Flex External drive. I transferred all my files from my previous external HD.
When I went to access my folders on my external HD, the folders are all locked, with Sharing and Permission section in the Information "Everyone: Read" only! I can't change any of the information or move things! All of them are locked and "read only." I know how to change it, but only manually, individually. I have several hundreds of folders and I don't want to manually change all of them to "Read & Write." Is their a way to let me re-set the folders to "Read & Write" easily??
i just posted this but i don't think in the right place as i have been assigned a ticket number and rec'd an email telling me my ip is logged..i hope they don't charge for advice! I'm a desperate woman with a small wallet at the moment. i have a ibook g3 running osx 10.4.2 toast titanium 6 and suddenly she is indicating there is no disc in the drive when i go to use toast and i realize it is not appearing on the desktop nor elsewhere just in ATA. it is neither reading nor writing from the disk drive. the optical drive isn't seeing it. i have tried rebooting and different disks but it doesn't respond. i am not a seasoned veteran here, I'm a layman. I do know when i look under ABOUT THIS MAC: It lists the following:
SONY CD-RW CRX800E:
Model: SONY CD-RW CRX800E
Revision: 1.3g
Detachable Drive: No
Protocol: ATAPI
Unit Number: 1
Socket Type: Internal
How do I change a file or folder permissions from 'read only' to read/write.
I want to edit some music track information in iTunes, but my iTunes music folder is 'read only'
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
I know this is lame, but I searched and can't find a solution. When I click on a day in ical it says it is a Read-only calendar. I repaired permissions, but it still says read only. The strange part is, in the Get Info screen, it says Read-Write for all the users.
View 5 Replies View RelatedI'm buying an external hard drive to use as a backup for my MacBook but also as a network drive that all the computers connected to my router (Airport Extreme) can use. There are two MacBooks and two PCs that connect to the network. I only need my MacBook to be able to write to the hard drive but I need the two PCs to be able to access and use the files on the hard drive. I was going to get a 1TB external and give it two partitions. The first partition is going to be the Time Machine backup for my MacBook and the other will be accessed by all computers on the network. What format will the second partition need to be so that both MacBooks and both PCs can view and use the files? Also what external hard drive would you recommend?
View 4 Replies View RelatedI bought this drive and I was wondering if it will read/write to the mini-dvd discs?
View 4 Replies View RelatedThere's been a large emphasis on the sequential read/write speeds of SSDs, but in many day-to-day usage patterns, the random read/write speeds are a better benchmark of performance. I'd like to make a chart summarizing all the different SSDs out there and available. But I need your help. Can those of you with SSDs run a benchmark and report the numbers here so that I can compile everything? Here are the steps:
1. Download Xbench 1.3 at [URL].
2. Open the program and run the "Disk Test" for your SSD drive.
3. Note the numbers under the Random test, for all four parameters of small and large writes and reads.
4. Repeat the test a second time to make sure that the numbers do not change. Accept the second test if the values are <10% different from the first test.
5. Screen capture the window by holding down command and shift and 4 and the spacebar. Click on the result window and that will save as a png file on the desktop; the default is Picture 1.png.
6. Report the values here with by attaching the screenshot of the result window. This will give us other needed information like computer and SSD model.
I realize that there are weaknesses to this survey. Xbench is only one benchmark. SSD speeds will vary based on usage. Etc. In the end, however, the variability should be sufficiently small that I think we'll be able to compare different SSDs well.
I'm going to get us started by posting my results with an Intel X-25M on a previous generation MacBook Pro. Ironically, my result will probably get thrown out because the SATA 1.5 GB interface actually limits the SSD read speed...
I use Paragon HFS+ for Windows which allows me to read and write to my HFS formatted drives. It works great for any external hard drive I use but when I use a flash drive it doesn't work. I format both my external hard drives and flash drives the same way, I use Disk Utility, I format them using Mac Extended Journaled and GUID partition scheme. When plugging in my flashdrive, my Windows 7 PC will not mount them. Disk Manager shows 3 partitions: EFI, Fat32 and some empty space. If I format my flash drives using the Master Boot Record partition scheme they work great.
So, here's what I have so far: External hard drives work fine when formatted with the GUID Partition scheme. (Mac extended journaled) Hard drives also show 3 partitions in Windows Disk Manager: EFI, HFS and empty spaceFlashdrives show 3 partitions but oddly enough the second partition shows as FAT32. But is completely unusable in Windows 7 Flash drives have to be formatted using the Master Boot Record partition scheme when formatting them as HFS+ volumes in order to work on Windows 7Windows 7 supports GUID partition schemes.
What is causing my Macbook Pro to treat an external hard drive differently then a flash drive when formatting them? Experience and common sense tells me that it shouldn't matter whether it's a flash drive or spindle drive, both should format the same. Granted, I could simply use exFat or FAT32 on my flash drives for cross platform compatibility however I prefer to use HFS+ when possible.
Info:
MacBook Pro, Mac OS X (10.7.3), 2007 MBP, 2.16Ghz, 3 Gigs of RAM
I have the PIONEER DVR-104 Drive in my MDD Dual 1Ghz G4 that has stopped reading DVD's. It still reads CD's just fine and will write CD-R's just fine. To get arround the problem (I need to be able to atleast read DVD's) I've installed a plain DVD drive in bay 2. This problem existed before I upgraded to 10.2.4 so it was there under 10.2.3 as well. Toast and the Apple System Profiler recognize it as a DVR-104, the proper drive. Lets see what else can I tell you... We are using Apple branded media. When I do drop a DVD-R in the drive whether blank or written it trys to read it for about 30 sec then spits it back out.
View 4 Replies View Relatedcan't write to FTP drives via finder. But I'm having a lot of difficulty connect to FTP drives via finder. Despite using the correct log in details and FTP paths just like I do in Fileziller, Finder constantly rejects and when I do get on using the master file hosting log in details I can't write to the drive only read.
Info:
MacBook Air, OS X Yosemite (10.10.1)
I notice the security news that FireWire could be used to bypass your login password because it accesses your RAM.
That got me to thinking: Can you use FireWire to read/write the RAM of the 'puter next to you and could you use this "feature" to turn that RAM into a RAM disk for fast access?
I thought SL offered feature like Macfuse where I am able to read and write NTFS (Windows) format drives testing on my MacBook and I am only able to read.
View 7 Replies View RelatedI'm trying to copy over an ISO file (legit one mind you) and OSX is telling me that I cannot move the file because I don't have permissions for it. So I do the usual, get info, check the permissions box, but the funny thing is, I do have Read and Write access but it still pops up that error.
I'm stumped on how to fix this... any ideas?
Here's a screenshot to clarify what I'm talking about.
How do I format an external HDD to read/write on a mac osx running snow leopard, and also let it be able to be readable on windows vista/7?
View 12 Replies View RelatedI want to be able to transfer tiles between my pc laptops and my mac mini using external hard drives ans or usb sticks
View 1 Replies View Relatedi have read the old thread but it seams very risky and dangerous. is this way safe? [URL]
View 2 Replies View RelatedI would like to be able to read/write files on my mac partition from my bootcamp xp partition. i can read but when i try to write i get a message saying i do not have permission to write to this directory. how do i give my windows xp bootcamp partition permission to read and write to my mac parition?
View 2 Replies View RelatedI may end up getting another external hard drive & would like to be able to stay with NTFS so I can use it with either PCs or macs, there is a PC in my home & I would like to be able to use it between the PC & my macbook pro. Does anybody know of good reliable software that does not hog resources that will enable me to read & write NTFS on my macbook pro?
View 1 Replies View RelatedI have a shared folder on Lion Server. The permissions for the folder are set to everyone can read & write. When I add files from another computer to the shared folder the file permissions are not set to read & write for everyone. Is there a setting I am missing on the server to make all files added over the network to have the same permissions as the folder?
Info:
Mac mini, Mac OS X (10.7.3)
I have a Windows/DOS formatted external harddrive adn want to access/write/delete data from it using my MCP with Lion OS. I downloaded NTFS-3G 2011.1.15 and installed and restarted my Mac but then got this error when OS started and I cant see my Windows external disk any more. I am not 100% sure if the format of this disk was FAT or NTFS.
Info:
MacBook Pro, Brand New!
