I have an external hard drive(seagate 250 NTFS format) which i have used on my windows 7 computer now that i'm trying to load the information onto my macbook pro (10.7.4) it will not let me change the permissions nor duplicate the files. How can I be able to edit and save the information to my mac from the external drive??
Info:
MacBook Pro, Mac OS X (10.7.4)
I recently borrowed my brother's laptop to use as a media station for listening to music from, and watching movies, in order to free up some space on my main macbook. In trying to migrate some files over, I discovered that my hard drive, a 320 GB WD Elements drive, is having some problems which I've never encountered before. It has always worked fine in the past, but now I can't transfer any files to or from it, from either computer. In all of my troubleshooting, I've gotten various errors, (-36, -50), and various messages saying how the device can't be read or written from, or how some files contian unreadable data, etc.Disk Utility found an unused node when verifying the disk, and notified me that the disk needed to be repaired.I then used Disk Utility, which said it was able to successfully repair it, but the same problem remains, and after verifying the disk, it still says it needs to be repaired.I've tried to find any files that may be causing the problem, and was finally able to delete a seemingly troublesome file that was stuck in my trash bin from the external drive after trying various apps, (ie Trash It, Cocktail, What's Keeping Me?).This didn't end up solving anything...I've used terminal to eliminate some other potentially problematic files, with no luck still, and I'm not too confident with Terminal so I don't want to be messing around too much without more guidance.
I've used Disk Warrior to try to solve the problem, but still with no success.When I use the app to Check All Files and Folders, it does so for only a few seconds, then reports that "An unexpected error ocurred while attempting to perform file operations" for several files, and that several files' "Property list is damaged and cannot be repaired". When using Disk Warrior to REBUILD the drive, the app pauses for about 15 seconds, then says that it can't be rebuilt because it is in use.Again, I've used the What's Keeping Me? app to kill any activity with the drive, and the same error occurs.I've spent a lot of time trying to sort this out.
Info:
MacBook, Mac OS X (10.7.3)
I bought a Seagate Free Agent Go Flex External drive. I transferred all my files from my previous external HD.
When I went to access my folders on my external HD, the folders are all locked, with Sharing and Permission section in the Information "Everyone: Read" only! I can't change any of the information or move things! All of them are locked and "read only." I know how to change it, but only manually, individually. I have several hundreds of folders and I don't want to manually change all of them to "Read & Write." Is their a way to let me re-set the folders to "Read & Write" easily??
i had a External Harddrive.Currently i can Read//Write on it in Windows PC(Windows7)But when i use the same drive in Mac i can only read...but can't able to write. How to resolve this issue
I have an early 2009 macbook, with 320 GB hard drive and running OS Lion, after i upgraded my os to lion, the computer ran perfectly normal, although a little bit slower than running snow Leopard. However, recently I notice my mac become very slow, got rainbow wheel even when i open the safari. then I use the black magic to test the hard disk speed, it appears the read and write speed is only a little over 30mb/s.
i have recently change my keyboard at apple store, I notice my mac slow down after that, do you think it would related?
Info:
MacBook, Mac OS X (10.7.1)
This issue has been killing my work flow for quite awhile. I have a G5 dual 2.0. I can barely read or write files to an external hard drive. Say I try and copy 1.56GB of audio (12 files) from my external drive it will start to copy then stop at 500mb for minutes then start moving as normal and stop again around 900 for minutes.. then again at 1.4. This also happens when writing.
Here is the confusing part. This happens with two external drives (different models) with firewire 400, 800 and USB. I have reinstall OSx. I have repaired permissions and ran repair disc on everything. These hard drives work FLAWLESS with my Macbook Pro as well. Gr what can this be? It takes forever to copy data to or from a drive which is often how I transfer audio between my desktop and laptop. I should soon have Mac Pro money and this crappy G5 can go out the window. I am on 10.4..
hey all, this has been really frustrating for me today. i want to be able to write to an external HDD that's formatted in NTFS. today i find out it isn't possible to write to this file system on a Mac and that on FAT32 it is possible. however, FAT32 can't address files larger than 4GB so this hurts me a lot. are there any other file systems that'll allow me to read and write from a Mac? my goal was to use freeNAS to build a NAS with an old tower and connect my external hard drives to it, but if i can't write to them this may not be possible.
View 8 Replies View RelatedWhat is the standard tool to test your hard drives read/write speeds? I'd like to test my new SSD to see how fast it really is. I've heard you cant trust XBench for that which is the only thing I have to use.
View 4 Replies View RelatedI just had the hard drive replaced in my IMac and it only at 1 to 1 or maybe 2 to 1 speed. my old one did over 10 to 1. car it be speeded up? Any way to get hard drive to read/ write faster?
Info:
iMac, Mac OS X (10.7.4)
I bought a MacBook Pro 13"".I do have a seagate external hard drive. When i connect my External Harddrive to Mac the data can only be read mode.I am not able to Write data on to External Hard drive.
Info:
MacBook Pro, Mac OS X (10.5.7)
I have a Late 09 15" MBP and a WD 1TB external HD. I've never had a problem until now. I start up the hard drive, then it loads up fine and the Mac recognizes it just fine. As soon as I try to copy something - doesn't matter how big it is - I get an error and at the end it says "(Error code - 36)". It just says the file cannot be read or written. Weird thing is I can access everything on the hard drive. Anyone have any tips before I try reformatting the HD?
View 7 Replies View RelatedMy external hard drive was accidentally unplugged without ejecting. Now when I plug it in, it read only. I can copy files from it but not to it. Is there a way to reinstate write access without losing my data?
Info:MacBook Pro, Mac OS X (10.6.4)
I have an external Transcend HD, which has been working perfectly fine for around 5 months now. It is NTFS, and I use NTFS-3g and Macfuse. Been running fine. Was able to read and write. Suddenly I am only able to read though. I go into the "Get Info" pane and the option to choose whether I want to read and write, or read only is gone, and all that it says is "You can read only". getting this back to read and write is really appreciated. I really need this disk.
View 3 Replies View Relatedsorry if this is a noob question, but when I try to save things to my new external hard drive a box comes up telling me that the disk is write-protected. Is there a way I can write-enable it? I have tried a bit of searching on Google, but to no avail.
View 5 Replies View RelatedI have a Seagate FreeAgent GoFlex Desk external hard drive, which i've loaded movies, pictures, videos, and documents on to. I have only used up about 100GB of 1.5TB and for some reason when I plugged it in today it wont let me load anything onto it and if you click get info on it, it says you can only read.
Info:
MacBook Pro, Mac OS X (10.6.3), 13"
I have a Toshiba 250GB external hard drive to back up pictures. I can write to it just fine. I also have a Fantom Drive 1TB external. I could write to it last week, but I turned it on this week and I can't write to it. I can still pull stuff off of it, but I can't write to it. What can be causing this? I have already installed MacFuse and NTFS-3G. It doesn't make sense to me that I can't write to it all of the sudden.
View 15 Replies View RelatedAfter a lifetime of owning PC's I finally purchased a MacBook Pro running OS X. I installed Parallels Desktop 5, Windows XP, and several Windows apps to have dual functionality. Now I need to write to my NTFS ext. hard drive where I backup everything. It has 800gb of space left, so it would be a shame to get a new one just b/c I have a Mac now. I first installed MacFuse and then NTFS-3G. Now when I reboot, the ext. HD won't mount at all. What have I done wrong?
View 6 Replies View RelatedMy external hard drive has reverted back to it's read-only form after a few weeks of running fine using tuxera so I can use my hard drive with my mac. Now tuxera or similar programs don't even recognise the drive.
Info:
MacBook Pro (13-inch Early 2011)
The optical drive on my 17mpb will read and play any DVD I put in just fine, but when it comes to everything else it will not read or write. The drive whirrs around and then spits the media back out.
Info:MacBookPro, Mac OS X (10.5.8), lion
How do I format an external HDD to read/write on a mac osx running snow leopard, and also let it be able to be readable on windows vista/7?
View 12 Replies View RelatedI am sure this is a simple question, but I am having a problem going from windows to mac with an external hard drive. I can read and write to the drive on any windows PC. On my macbook pro laptop, I can only read. It will not let me write or erase anything to the drive. Does this have to do with the drives formatting? If so which format will let me both read and write on mac and pc?
View 4 Replies View RelatedI may end up getting another external hard drive & would like to be able to stay with NTFS so I can use it with either PCs or macs, there is a PC in my home & I would like to be able to use it between the PC & my macbook pro. Does anybody know of good reliable software that does not hog resources that will enable me to read & write NTFS on my macbook pro?
View 1 Replies View RelatedI have 2 external hard drives one specifically for mac the other is for either mac or Windows base PC. I backed up on my mac using the time capsule back up now. When I attach to a usb ion my windows PC it wont read or even pick up either external discs, is this normal. How do I get files from my mac to windows based PC, it does work using a memory stick. But why won't PC pick up the drives.
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
For some reason my Lacie external drive that's hooked up to my imac is constantly being read for no reason. It's never idle and never rests until I eject it. I'm afraid the drive's gonna fail soon and all my work gone? Did a search but can't find anything online.
View 1 Replies View RelatedI have my iMac since August. I use it a lot, and I've noticed that the hard disk makes read and write noise a lot of times, even using Safari, for example. It looks like fragmented. What can I do?
View 15 Replies View RelatedWhen I connect my external hard disk (Maxtor) to my Mac Book Pro, I am not able to copy/transfer files to it, though I can copy from it to my Mac. How do I change the permissions from Read Only to Read and Write?
Information:
MacBook Pro
Mac OS X (10.5.6)
Ok so I have an 8800 GS imac, 3.06 intel core 2, 4 gigs ram. Running snow lepord. I need to resolve an issue where I can not get into OSX. At first I got error messeges saying my external HDD could not read, now it looks like its my primary drive because when I restarted I got the progress bar under the apple logo, indicating that something is wrong with the OS. The bar when to full 100% but then I got stuck at never ending spinning wheel. I restarted and no more progress bar but still the spining wheel of death. I really dont mind refomrating its just that I had some important text documents and other files that I cant get back without recoving them some how. How to proceed? I held down cmd v or s (i forgot) on startup and got a black screen with several problem statements. One reads the system boot strapper has crashed trace BPT trap.
View 1 Replies View Relatedmy External Seagate Hard drive just changed to read only on its own?
I went to get info and scrolled down to the Sharing and Permissions
But there is nothing there but a greyed out : You can only read
There are No boxes to check or uncheck, No options to change to read and write, No name of owner or ignore ownership box. NOTHING ELSE IS THERE
I have recently upgraded to Mountain Lion and am having other problems as well
I cannot put files in my flash drive for some reason. How do I change this setting? My flash drive format is Windows NT File System (NTFS).
View 6 Replies View RelatedMy Mac Pro came with a 500GB boot drive when I ordered it 3 years ago. It has been used most days and now runs Snow Leopard (for scanners and a canopus video box that don't work with Lion) and Lion. I did a write & write test on the drive recently at both were approx 60 - 65 MB/s. I have another drive in my machine I bought last month, replacing an WD drive that failed in less than 18 months. This new drive (complete same as replacement is a WD Caviar (Black) 1TB 64Mb drive. This drive tests at speeds for 110MB/s. This may seem an obvious question, but will I notice much difference if I swap the drives around and have the newer drive as my boot drive. Also, does having two OS on a HD slow the drive down also?
Info:
Mac Pro, Mac OS X (10.7.3)
