If HP has a driver that will work on their scanjet 3770. I just upgraded to a MacBook Pro using Os X 10.7.4 and the scanner software is not compatible.
Info:
MacBook Pro, Mac OS X (10.7.4)
I have PowerMac G4, 1.25Ghz PowerPC, 1.25GB Ram, OSX 10.3.9 and want to use my HP 5300c scanner. I installed the HP Image Zone Ver 9.1.2 software that at least on the surface seemed to install the drivers. I am able to see the device on USB through both System Profile USB and Tech Tool pro 4. I suspect an HP driver installation problem or incorrect Driver /compatibility issue. How to verify the correct installation of the drivers, where to go to ensure that I have the correct drivers. There is no way to download software directly from HP, only through oexternal links into the HP site. If anyone knows of the correct links for the 10.3.x drivers, or have any other suggestions as to what they have done to get their HP ScanJet 5300c to work with Power PC G4 with OSX 10.3.x. I last used the HP 5300c with my iBook G3 under OS9, though that was a pain due to CP conflicts - Luckily I still use conflict catcher - and now I need to use it with the G4 under OSX.
View 1 Replies View RelatedI went to HPs site to find they will not be supporting this model. I use it almost everyday to scan my jewelry creations for my website and Etsy store. I love Lion so far and needed to upgrade before my .mac services go away, I was told. The main requirement is good depth of field for 3D scanning.
View 2 Replies View RelatedI recently installed the 64 bit Windows 7 Ultimate operating system onto my MacBook Pro 13 inch. I have the most basic Macbook Pro 13 inch with nothing fancy added. Whenever I load up the Windows 7 OS on my Macbook, it never utilizes or even realizes that I have the NVIDIA graphics card in my laptop. It instead believes I have some integrated graphics card that cannot even run the most basic of PC games. I know my laptop can run these games because on OSX it runs multiple games with higher requirements than these games I am trying to run on Windows.
Basic question: How do I get bootcamp or whatever else to make Windows 7 realize I have a NVIDIA card and drivers. Sorry if I am coming off as stupid or confusing.
I have a Macbook plastic, 2.4 GHz intel core 2 Duo with 2 GB of ram.My Mac is currently running on OS X, i used to have a 40 gig partition Windows XP, a couple of friends of mine where talking about how much they liked Windows 7 and finally i had had enough blue screens to say, sure ill switch, why not?... assuming it would not take longer then lets say a day at most, i set off on my quest.
FWI, im running an older model Macbook that was bought refurbished (not sure if that has anything to do with my problem). anyway i removed my previous partition, then using Boot Camp Assistant i repartitioned a 40 gig section for Windows 7. Then ran the installer. I have a copy of Windows 7 ultimate 86x. The Windows boot screen turned up, i had to reformat the partition so that i could install, no problems there. after all said and done the installation worked perfectly, up to a point... First problem that appeared was the lack of sound. i fixed that by downloading Realtek's High Def sound drivers.
Then it was the rest of the drivers for the macbook. heres where i run into my problem, i have the Mac OSX install discs 1 and 2. inserting the first disc the option of the auto run of the setup popped up i clicked run. and instead of the same old install drivers option all i have is the option to install the software that lets macbook airs share cd/dvd drives... needless to say i got frustrated and to put it lightly pissed off...
unsure of wtf was going on i looked it up online and really couldnt find anyone with the same problem, i found a web page saying that i should have the windows auto update itself and that should fix the problem. it did not. i dont know what the hell is going on. and im about this close to reinstalling windows xp and telling windows 7 to go **** itself...
So i am trying to change my apple boot camp drivers to nvidia's, but i think i must have downloaded the wrong ones, or done something wrong. I tried to install Geforce/Ion driver release 192.62, (from nvidia's site, i selected gefore 8 series) and when i ran the setup it said: 'nvidia setup program could not locate any drivers that are compatible with your hardware' . My questions are:
� Which drivers should i download? a link would be great.
� Are there any pre-requisites i must do, such as install version 170 first?
I am using an iMac 24" with 4gb ram, 500gb 5400 rpm HDD, and 8800 GS 512mb.
The reason I am trying this, is because when i play some online games, i often get bad lag spikes, but that chat is still running. Someone recommended me to 'update my drivers'.
I can't find the answers I know its been asked before.
Its the 2010 MBP 13"
I have Windows 7 Professional 64bit running through parallels 5 and it seems to be missing alot of drivers (wireless most importantly, but also audio etc). Where can I get these, is it the same as bootcamp drivers( are they on one of the disks that come with macs?).
I've installed a legit copy of Windows XP, SP2. Nothing works, not my webcam, not my internet, not even the full resolution. The first time around that I did this, I had the DVD that came with my iMac, I installed the Windows drivers stuff off of it, and everything worked perfectly.
Can anyone point me in the direction of either a replacement for that DVD (.iso image or something?) or simply the required drivers that will let my iMac 8,1 connect to the web?
I boot camped my Macbook Unibody 13" (bought early 2009) with windows 7. However the bootcamp version was 2.0. I now cannot get drivers from the 3.0 bootcamp update.
View 2 Replies View RelatedSo although 5-6 hours of battery is not uncommon for a MBP running OSX, when you get windows on there, it goes down to 90 mins.
Most people (inc me) believe this is not a failing of windows, but a result of poorly written drivers not utilizing the hardware correctly.
It doesnt look like apple will ever write decent drivers for their hardware for use with windows.
So, im wondering are there any projects to get decent drivers for apple hardware for use under windows? even if you didnt get the full 5-6 hours, it should still be easy enough to get 3-4 hours from a mac on windows.
I need a nice 13" 2010 MacBook Air owner to do a favor for me. I need the bootcamp drivers for windows 7. They can be downloaded by going to utilities>boot camp>download windows support software. I have already erased the original OS and did not download them. PLEASE if someone could be nice enough to download them and upload them to rapidshare or something.
View 15 Replies View RelatedI have a macbook pro
Model Identifier:MacBookPro5,5
Processor Name:Intel Core 2 Duo
Processor Speed:2.53 GHz
Memory: 4 GB
With
NVIDIA GeForce 9400M:
Chipset Model:NVIDIA GeForce 9400M
Type:GPU
Bus:PCI
VRAM (Total):256 MB
Vendor:NVIDIA (0x10de)
Device ID:0x0863
Revision ID:0x00b1
ROM Revision:3427
It is incredible slow - freezes constantly unless on very low graphics in games like World of Warcraft so i'm assuming i need to upload graphics. So i went to the Nvidia website, and tried to update driver by following steps correctly, selecting the correct options, etc and it said it couldn't update for my system..
How do i update my software so i can play without freezing?
My Air came without disks. Can I download the drivers for Windows XP/Bootcamp some where?I tried searching Goole and Apple but no luck sofar.
View 3 Replies View RelatedCan someone please point me to working drivers for macbook pro unibody 15" 2.66 for Windows 7.
View 1 Replies View RelatedDoes the disc that comes with a 2010 mbp i5 have windows 7 drivers? if so, what about 64-bit? One last question, what format should I partition the windows sector?
View 4 Replies View RelatedStandard bootcamp drivers are quite old so I went to upgrade the drivers from nVidia.com; I noticed that nVidia doesn't support the 330M under its driver page, am I to assume the 330M is an Apple specific part? Will nVidia support the 330M in an upcoming release?
View 1 Replies View RelatedI am trying to install bootcamp and need drivers to get windows xp up and running. Where do I get the drivers from?
View 1 Replies View RelatedI can not get my Macbook Pro running OS X 10.9.4 to recognize a 5 year old external hard drive from iomega. The product code is 31759000 RDHD-U. The hard drive powers up, all cables have been checked to work on other devices, and yet nothing happens when connected.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
Anyone know how I can install the drivers for a Logitech K350 keyboard onto my MBA? Logitech does not support drivers for OS.
View 3 Replies View RelatedAnyone has the drivers needed to for the wireless adaptor of the MBA (for windows XP) ???
View 3 Replies View RelatedI have an Late 2008 Macbook pro unibody, 4gb, 320gb 7200rpm. I installed the bootcamp drivers off the leopard CD that came with the mac and all was good! I have since taken it to Australia for a holiday and need to reinstall bootcamp but left the Leopard CD back in the UK. Stupidly, the 2.1 bootcamp drivers on Apples site don't support the Unibody mac! Can anyone please direct me to where I can download the Drivers (for 32bit XP home SP2) for the Unibody Macbook pro? The exact ones that are on the Leopard CD that came with the new Macbook Pro?
View 24 Replies View RelatedI just set up my printer on my home network, and it works with my two wireless PC's, and now I am trying to add it to my 3 macbooks, but I am having some trouble. I connected to it through system pref > print/fax > selected my printer. It connected and works sweet, but, the driver must be wrong. I was not sure what the driver was so I just chose GenericPostScript but when I print, a blank sheet comes out, no text. The PC's print just fine, but not my MacBook. It is a DELL printer connected to my dell PC, so I am not sure what driver to use. All I know is it is a Dell AIO 926.
View 2 Replies View RelatedI got my Aluminum MacBook 2.4 a few days ago and I have since then installed Windows XP SP3, I recall reading about being able to install new Nvidia graphics drivers to get even better performance. I tried to search it, but I couldnt find the process on how to install them.
View 2 Replies View RelatedI waited for 3 years to get a new MBP, and 12 hours ago, my dreams were finally realized. I pulled it out of the box, transferred some data, and hopped on a plane to my best friends baby blessing. I'm gone for a week, and I'll need windows access, so I threw my WinXP SP3 disc in my carryon. I of course forgot to get the OS X discs with the windows drivers from out of the MBP box. So, I'm states away from my discs, with no local options. Does anyone know where I can get the drivers for the new Unibody MBP (the one with the SD card slot and the 512VRAM, to clarify)? I'll be anxiously refreshing this page.
View 15 Replies View Related- First Disk named Applications install DVD
- Second Disk Mac OS X install DVD
I'm new to macs. Which one it would really help.
I don't have my CD/DVD for the drivers. Can any1 provide me with the latest drivers I can download from the internet.
I am installing windows 7 on bootcamp right now on my 15 inch i7 macbook pro. Unfortunately, my MBP OSX install CD is unavailable to install the drivers. My question is, I have a 13 inch macbook pro osx install cd. Will that work to install my drivers on windows 7 for my macbook pro 15 inch?
View 7 Replies View RelatedHow do I remove Logitech mouse drivers on my MacBook Pro?My OS are Mac OS X Lion 10.7.2
Info:
MacBookPro, Mac OS X (10.7.2)
I am having trouble installing my new espon artisan 730. When I add the printer to the print queue selection, it says that software is available from Apple for download. When I click download and install, it then tells me that the software isn't available and I can't install the printer.
Info:
MacBook Pro, Mac OS X (10.7.3)
how do i delete a printer and the drivers from my mac book
Info:MacBookPro, Mac OS X (10.7.3)
