OS X :: Boot Camp 2.1 Unable To Work With Windows 7
Jun 9, 2009
I installed Windows 7, 64 bit to another partition. I let it do its update thing. When moving on to installing Boot Camp from the Mac OS DVD however things failed. I heard that if things does not work out as promised I would have to download the Boot Camp 2.1 64 bit version for windows vista from the apple website, so I did. This didn't change anything however. The OS as a whole works well as of now but there's no support for any of the hardware such as hotkeys, camera and multitouch. I've also noticed that the sound drivers don't work properly and I'm stuck with a red light in the earphone jack, together with no sound. This goes even AFTER installing the latest drives from Realtek's website.
Lastly, it also seems that my graphics drivers are not working that well. The other day I was trying to play Plants VS Zombies but the whole game was very pixlated, nothing like it should be. The game itself does not have any settings for changing this.
So in short this is what does not seem to be working:
- No support for the hardware such as isight camera, hotkeys, multitouch etc.
- No sound.
- Graphics not as good as they should be.
View 4 Replies
ADVERTISEMENT
Feb 15, 2009
So i installed windows 7 on my macbook (not aluminum) and when i go to install the boot camp drivers off of the retail leopard CD i get an error that says that I can't because it only installs on vista or XP. My laptop came with Tiger CD's so i can't get them off of there.
View 1 Replies
View Related
Jul 14, 2009
In my attempt to install Windows XP via Boot Camp, I accidentally inserted an SP1 disc instead of the SP2 disc that I have. The installation proceeded to the point where it does for most who attempt this: the screen where you are prompted to press ENTER. I could not proceed and therefore restarted the iMac and held down the mouse button upon start-up to remove the CD.
HERE IS THE PROBLEM:I can not boot into OS X because the keyboard shortcuts (those that might allow me to select which partition to boot from and/or reset PRAM) seem to be disabled. Instead, a reboot always ends at a black screen with a blinking DOS-esque cursor, or the prompt: "No bootable device -- insert boot disk and press any key."
I have attempted inserting my SP2 disc at this point, to no avail. My keyboard seems to be disabled, as if the SP1 install proceeded just enough to establish itself as the boot drive without drivers for the keyboard. I've tried using all 3 USB ports, disconnecting other USB devices. Oddly, my bluetooth mouse works to eject the CD on reboot...
View 9 Replies
View Related
Apr 10, 2009
I was able to get Windows Vista 64 running on my 17" MBP, it is pretty slick. I set aside 32 GB for Windows, ran the install, loaded all the appropriate Boot Camp drivers and everything is working perfectly in Windows. I boot back to OS X to attempt to configure Parallels...
So I fired up Parallels and follow the guided instructions. However, when I get to step 2 Im not sure what I should be doing. I already have Windows on its own partition, but Parallels is asking me for a CD/DVD image. Im a little leery of putting the Win disc back in, I dont want Parallels to always want to boot from the disc. how do I tell Parallels to load Windows as a Virtual Machine off of the Boot Camp partition?
The partition Boot Camp created now appears on my Desktop in OS X as Untitled, I can not, for the life of me, figure out how to change that. If I eject that volume will I still be able to Boot to Windows? Will Parallel still work?
View 5 Replies
View Related
Apr 16, 2009
So I finally got Windows 7 64bit installed on my MBP 2.33 machine.
However, from the guides, I should just insert my leopard disc and it should run. This is the thing, I don't know where my leopard disc is (i've been moving a lot lately due to being unemployed) and its either lost or packed away somewhere. I have a backup copy on my time machine drive and haven't tried that yet. I downloaded a 2.1 extraction and burned it to CD though. I inserted the CD and I can see in windows 7 three applications. One is Windows XP, the others are Windows Vista 32 and Windows Vista 64. I click the Vista 64, but nothing happens at all, and no drivers are isntalled.
View 4 Replies
View Related
Aug 28, 2009
For those who have installed the Boot Camp 3.0 drivers does it resolve any of these problems with the 2009 Macbook:Low volume output from speakers, Optical output red light always on, Keyboard backlight won't turn off, Microphone not working, Left speaker louder than right speaker
Other than the ability to access your Mac drive does Boot Camp 3.0 add anything that would make it worth the upgrade?
View 3 Replies
View Related
Jul 26, 2010
hi! i'm planning to install windows 7 64-bit in my mbp, problem is i looked at the requirements needed and it stated that i needed boot camp update 3.1. i checked my boot camp version and it stated that i had 3.0.1, tried using software update, but states that i had no updates available. what should i do? and what else do i have to keep in mind while installing windows using boot camp. thanks in advance!
View 1 Replies
View Related
Apr 26, 2009
I have been trying to install Windows 7 X86 RC1 on my brand new early 2009 iMac and have been having the same problem every time.
Initial installation goes very smoothly, but all the trouble begins when I load the Boot Camp setup.exe from the Leopard disc.
During Boot Camp installation I get a compatibility warning about some of the Apple Boot Camp drivers working correctly with this version of Windows.
If I go ahead with the installation then what happens is I get a BSOD and then Windows becomes un-bootable. This is repeatable as it happens every single time I do the installation.
Things initially seem to work up until I load boot camp assistant from the Leopard install disc, so I'm wondering if there are other drivers available that play well with Windows 7 for my iMac that I can try? I've followed several Boot Camp tutorials for iMac with Win7 and am pretty sure I am doing everything correctly, but things just aren't working.
View 24 Replies
View Related
Sep 8, 2009
I want to know if anyone can identify compatibility issues with this set-up, it's for architecture school and it is very important that it works.
17" Macbook Pro 2.8Ghz
8GB RAM
128GB Solid State Drive
Here's where it gets confusing:
through Boot Camp 3.0, run Windows 7 Home Premium
run AutoCAD 2010
run 3Ds Max 2010
run Revit Architecture 2010
(Each of these have well-documented problems running in Boot Camp regarding broken licenses, however, no information I can find since 2008 identifies issues. Autodesk's website does specifically say each of these products are supported on OSX through Boot Camp.)
I will be saving all files to either an external HDD (these also have been documented to cause problems concerning the license in Boot Camp, I am presuming that since Autodesk now supports Boot Camp, this issue has been/will be resolved through Autodesk) or a networked storage system at the university.
OSX will be used primarily for using Adobe CS4 Design, OpenOffice, and internet browsing. Basically, pleasure use with a minimum of curriculum-related applications (except for CS4).
View 2 Replies
View Related
Feb 13, 2008
I just got my Mac Pro in the mail today. I put two new disks into it, a 80 gb music drive and a 320 gb disk to use for windows.
Whenever I put in my windows disk and it asks me to choose which disk to install windows on and I recieve errors. Please excuse me I am very ill and have an awful headache and have been trying to get this worked out for a few hours now.
The first error I received was this: "Windows is unable to find a system volume that meets its criteria for installation."
There is a workaround page here but it hasnt helped me at all.
I'm trying to install vista on my second disk, a seagate 300gb. The music drive is formatted to fat 32. I've even tried removing my os x and music drive and just boot off the windows dvd.. nothing. Any clue as to why it wouldnt work right? I have read other threads about this but they havent been resolved... it so bogus!
View 11 Replies
View Related
Sep 27, 2010
After my other thread and a bit more research I have decided that Boot camp will suit my needs the best.My next question, which Version of Windows will work the best on the MBA. I know 100% that it won't be Vista. But cant decide between Win XP or Win 7.
View 14 Replies
View Related
Feb 20, 2008
I know the Boot Camp drivers that are shipping with the latest Mac Pro includes 64-bit drivers for Vista, but I was wondering if anyone has tried to see if they work on XP x64? That's the 64-bit Windows version I have on hand and it would be nice to get it to work. I don't suppose the drivers that shipped with the MacBook Air are any newer?
You would think that Apple would jump to support XP x64 given the commercials about people switching back from Vista to XP.
View 13 Replies
View Related
Apr 20, 2009
I've been trying to run boot camp on my black Macbok and have been halted with a Boot camp error message: "The disk cannot be partitioned because some files cannot be moved." It then tells me to back up my disk and boot up from my Leopard DVD, and restore to a "journaled" volume. Now, I've checked, and my HDD is already journaled. I've run "verify disk" and everything seems to be working okay. I've read that sometimes having things related to Parallels on the computer can create this error, and so I've deleted all things Parallells and am still getting the same error. I do, however, have Fusion (though I've deleted that Windows partition.)
I'm hesitant to follow the directions further, for I have nothing to back my disk up to and my Leopard DVD has gone MIA.
Can anybody give me a hand?
View 6 Replies
View Related
Jan 20, 2010
ive been using my clean win7homepremium install for about 4 weeks now. i have the video card working nicely and all seems to be well, i play modernwarfare2 on it and it is all good... however (there is always one..)
the mic doesnt work... it seems to be recording but at a super low volume. i check win7 sound control and the recording is set to 'microphone' but no dice. i turn up the boost and volume to full and tap the mic on top of the display and i get 3 green bars...
i was hoping the 3.1 updates would fix it, however i cant get anything to install... its like its an update for vista, not an update for people already running windows 7.
View 1 Replies
View Related
Jul 15, 2010
I got Mac Mini and i installed Windows 7 on it with Boot Camp, After i installed drivers and everything. Everything worked includes the Magic Mouse. After i did a restart my Magic Mouse didn't work anymore. I tried turning the Mouse off and on and it still doesn't work.
View 3 Replies
View Related
Oct 20, 2009
when I went to restart the computer so those updates would take effect, during the start up process, all I continually see is the Windows XP scrolling status bar, I shrugged figuring it had a bit to do and left it to its own devices, and a half hour later returned to see the same scrolling progress screen. (before choosing which account to log into for windows).
View 6 Replies
View Related
Apr 11, 2010
i'm having trouble creating a partition for Windows using Boot Camp...
Steps I Have Taken:
1) Repaired Disk Permissions
2) Repaired Disk
3) Deleted huge files or moved them to an external drive (huge as in >6gb)
Is there anything for me to do? I've searched these forums and some other ones but really haven't found anything.
View 3 Replies
View Related
May 1, 2010
I own every piece of software and hardware from Apple there is and I cannot understand that it seems that everything is about the iPad and iPhone right now. I have been having these issues since I got my 27" iMac. I can install Windows 7 just fine on my MacBook Pro and my previous 24" iMac.
Ever since I got the 27" iMac I get a black screen when installing Windows. I have found some posts that have a way around it, which seemed to have worked but now I am getting the blue screen of death. Doesn't matter if Windows 7 is supported by Apple or not but Boot Camp is and it should be corrected.
There is no excuse that after 6 months this issue has still to be addressed, all Apple talks about now is iPad and iPhone, I am sick of it.
BTW I own an iPad and I don't see the big fuss about it, I bought it mainly to read books and watch Netflix on the go.
View 3 Replies
View Related
Nov 13, 2009
The new blue tooth key board does not work in windows 7 boot camp, Windows cant locate the divice... New iMac blue tooth key board does not work in windows 7 boot camp!
View 4 Replies
View Related
Jan 13, 2010
Installed windows 7 today (geniune copy) to play the Star Trek Online open beta, managed to download and install it, but when I go to play it, it crashes. Went to performance information and tools and under graphics it says: Total Memory Not Detected and everything is 0MB apart from display adapter which says 6.1.7600.16385 and monitor resolution.
I have a 24" iMac 3.06Ghz with 8800 graphic card. Few weeks ago I had windows 7 installed for dragon age, ran like a charm, but I got rid of partition (dont ask why)
yes I have installed the bootcamp drivers!
View 5 Replies
View Related
Oct 14, 2010
I've got a 2010 i7 15.4 MBP, after installing boot camp drivers from MAC OS DVD, I could not find any option about how long to dim screen brightness. However, my friend's 13.3 MBP does have. What about yours, guys?
View 4 Replies
View Related
Jun 29, 2009
I'm a total Windows newbie and I'm having trouble moving programs that I've installed onto Parallels 4.0 into my boot camp partition. Is this even possible?
If so what is the best way to go about quickly accessing programs from the Parallels virtual machine?
Could I burn them to a disk?
View 3 Replies
View Related
Nov 21, 2010
In retrospect, I should have ignored it when Apple Software Update told me about the Boot Camp 3.2 upgrade for my 2006 Mac Pro running x64 Win 7 ultimate. When I ran it, it overwrote my blue tooth driver and my keyboard stopped working. Thanks for the folks at Mac Rumors forums, I was able to go through the procedure to get it working again, and I also had to update the video driver (again) from ATI for my 3800.
So then I decide to reboot into MacOS and discover that my icon for selecting the boot disk was gone, not to mention any directory or programs in the start menu. This happen to anyone else? Do I have to downgrade to 3.1 or does anyone have a recommendation to get 3.2 working?
View 7 Replies
View Related
Nov 9, 2009
I have an '08 Octo 2.8.
I created a Boot Camp Partition (an entire drive, actually) and installed XP. The install went off without a hitch ... Except, having rebooted to Mac OS X (10.6.1) there is no way to boot Windows again. Going to Preferences->Boot Disk shows no Book Camp bootable drive.
View 3 Replies
View Related
Dec 25, 2008
This is the 1st time i got a Mac , i bought a black Macbook 2.4GHz some days ago .
I installed Windows Vista Ultimate using Boot Camp , and all went smoothly .
Only 1 prob is when restarting , i have to wait too long for the Windows to log on , i think about 1min with the black screen.
And if i want to boot in Mac OS , i have to push down the D button or the Alt, it takes quite a long time too .
So do you guys have any solution to this problem ? I want to get rid of the waiting time, way too much.
And do you know how to make my Macbook jump right in the choosing section when it starts ? ( so that i dont have to push down any button when it starts )
View 4 Replies
View Related
Feb 18, 2010
I have been trying to install Windows 7 (yes, legit copy) to my Macbook Pro the whole day, but I keep on getting this error message saying "Press any key to boot from cd or dvd . . . ."
When I press any key on the keyboard, nothing happens. I know this copy works because I've tried this on VMWare 3. (I'm going to Boot Camp of BIOSHOCK!)
What I've Tried:
Deleted partition, recreate partition and choose the Windows 7 disk as startup disk.
View 15 Replies
View Related
Feb 19, 2010
Well I installed Vista Ultimate using boot camp on my 27 inch iMac using 10.6.2 and now I can't get it to boot in OSX. I tried holding the command key when rebooting but it just goes into the windows part. Looks like windows took over. Does anybody know how I can get it to boot in Leopard?
View 3 Replies
View Related
Jul 6, 2010
Have the new 15" MBP with i7 Processor. I had another MBP with a 7200RPM drive and installed drive in the new i7 Mac. Computer was working fine until I installed Windows via Boot Camp. I can't boot to the Mac Partition any more, the partition is there but when you try to boot to it you just see the Apple logo and NO circle. I cannot boot to the install CDs or a bootable external drive. I target disk mode the computer and used another computer to boot using the drive in the i7 unit and it's fine and I can see all the information. I tried booting the i7 into single user mode and saw the following message:
efiboot loaded from device: Acpi(PNP0A03,0)/Pci(1|1)/Ata(Primary,Master)/HD(Part 2,Sig********-****-****-****-************)
boot file path: SystemLibraryCoreServicesoot.efi
.Loading 'mach_kernel'...
................................................................................
View 6 Replies
View Related
Jul 20, 2009
I just installed Windows XP to a Boot Camp Partition on my MBP. However, rebooting is a hassle and naturally I want to avoid doing such as often as possible. I think running Parallels Desktop would suit my needs quite well. But here's the catch: I want to be able to use one partition to serve both of those needs. In other words I want have the option of booting through both Boot Camp or Parallels.
How would I go about doing this? I already have a XP installed via Boot Camp. So if there is a method where I don't have to reinstall, great, but I am fine with deleting stuff.
View 4 Replies
View Related
Sep 15, 2009
I just purchased a new iMac (2.66 c2d & 4gb of ram), Parallels 4, and Windows XP. I would like to get great performance whenever I use Windows XP and would like to know which installation procedure would help accomplish that.
Would Parallels provide me with a better user experience by installing Windows directly via Parallels OR by having Parallels utilizing a Boot Camp Partition? Which is better and why? Also, how much memory should I allocate to Parallels/Windows XP?
View 4 Replies
View Related
