How to run my macbook in windows mode, I have a software I need to install on my macbookpro but this software can not be run on the macbook pro software. I was told I can run my apple in a windows mode?
Info:
MacBook Pro
As of last night, my MBP started acting very strangely. After entering my username and password, it would enter the desktop for a short period of time and then kick back into sleep mode; the screen would turn back to black. Sometimes it will let me stay on the desktop for a long time and other times it will hardly let me stay on the desktop. I called apple support and they had me start the computer in safe mode; even then it occasionally kicks me out.
The tech guy said that it was a "strange software issue" and not a hardware issue. I thought it was a hard drive issue; my hard drive makes an odd sound when it unlocks (a grinding sound), but it has been doing that for quite some time with no issues. I tried to reset the SMC and it didn't do anything.
How should I remedy this problem? Is this a hard drive issue? Hard drive failure? Has the grinding sound finally caught up with me? I am running OS X; not leopard or snow leopard. I know I need to upgrade, but this shouldn't be happening.
I reformatted my MBP a few days ago (yes, I'm crazy), and now when I decided to install Photoshop CS5 Extended, it did not bring the option of a 64-bit version, meaning my MBP is now running only on 32-bit mode. But I remember that when I installed it before, it did. So obviously I was running 64-bit mode. Did yours come by default with 64-bit mode? Should I go ahead and change it back to 64-bit mode?
View 1 Replies View RelatedMy MacBook does not sleep immediately, I have already tried removing safe sleep and it gives me no effect. It is not a hardware problem as my Windows Vista on the Machine sleeps just how I would like it. For info, the Hard Drive that is in it (320GB WD Scorpio Black) was used in an EFI Hackintosh install for my MSI Wind (but EFI installs do not modify the main operating system so I do not know what the heck is causing this)? By the way, the MacBook is custom, made by me. I built it out of three dead MacBooks.
One Black Core duo which was stepped on and had a broken screen and hinges which gave me:
Only working Logic board of the Pack (2.0GHZ Core Duo) I paid 140$ for this one
2 512MB sticks (Removed one and added a 1GB Stick, yes I know matched pairs, gonna find another 1GB soon)
Bottom case.
Top lid
Half the keys for the keyboard.
The Second MacBook Free:
2.0GHZ Core Duo white gave me with coffee spilled on it
Top case with trackpad, and half of the keys
Bezel
Hinges
Screen
other screws etc.
Fan (The one inside was going clack clack clack)
One 2.2GHZ Core 2 Duo which a dog peed on, Free for getting data off of:
DVD-R Drive one that was in it wouldn't eject
Sleep Light, the one that was there originally was borked and did not light, and IR did not work. Now it does
alternative screen with no pressure marks like the one I have now but one noticeable 1/2 inch scratch.
Various screws.
I am yet to finish it. I am still prototyping the new top screen assembly using the Black lid, a red apple, and the screen with a scratch on it, and the bezel from the 2.2GHZ which is really beat up. The current top assembly is straight from the 2.0GHZ White. Here's a pic of it in it's current state.
Eeven after the keyboard update (2/19), my mac still seems to ignore the first key I press when my computer is idle. usually happens with the pause, play, caps lock, etc. i tried to redownload the keyboard update from the apple site, but it said my keyboard did not need the update because its already updated.
View 1 Replies View Relatedwhen i have my macbook on and close it (sleep mode) and re-open it at a later time. it typically makes four noises (basically sounds like it is reading the hard drive for 1-2 seconds when you open it. lately it is making those same noises but noticeably slower. what could be causing this? is my hard drive going to go out on me soon? i have about 10 GB free on it.
View 1 Replies View RelatedI need to get an iBook G3's system profile (CPU speed, memory, drive config., etc.), but have no video (black screen). Hard drive is ok. Can this be done in Target Disk Mode somehow? I have NO external monitor.
View 1 Replies View RelatedWhile trying restore the entire HD image to a different hdd in system recovery mode the laptop goes to sleep.
How to prevent it ? the system recovery does not seem to have any terminal app so cannot issue caffeinate command either :/
Info:
MacBook Pro, OS X Mavericks (10.9.5)
1) If my MacBook Pro is fully changed and I plan to put it to sleep mode, do I still need to let AC adapter plug in?2) Let the computer to sleep or turn off is better when I don't use it?3) What's the normal "Fully Changed Capacity"? Because I saw it changed from time to time when I check in "Apple system profiler"?
View 6 Replies View Relatedok i like to use my macbook as a desktop computer and was wonting to know if i use the clame shell mode will it break my screen or macke it over heat i kindea scared to do it can some one help me pleas i have a 2006 white macbook
Info:
magic mouse, Mac OS X (10.5.8)
I tried fsck -f fsck -y multiple times, booting in safe mode, zaping the pram and all that stuff, nothing as worked. I don't really care about how to fix it but I care more about, Is there any possible way I can get files off of the macbook even though it wont boot. Like is there a way for another computer (windows or mac) to pick it up so I can transfer files? What accessories will I need?
View 1 Replies View RelatedI am trying to install Windows 7 on my 24" iMac. But the DVD drive it playing up and is not accepting the CD. I am wondering if there was a way I could use my Macbook to install it over Firewire or something similar ? Even USB ?
View 3 Replies View RelatedI have resolved my MacPro sleep issue by removing the Seagate 320GB stock drive. For whatever reason, if that drive is plugged in, it reboots my MacPro when waking from sleep. I had setup 2 WD 500GB drives in RAID 0 as my boot volume and this was configured with Windows XP Pro for other uses.
View 24 Replies View RelatedI'm downloading a long patch for World of Warcraft, and I want my iMac to stop burning up so much Heat! Can I 'half' turn it off or something - so that it keeps downloading but relaxes and cools down?
View 2 Replies View RelatedSo just out of curiosity I was messing around in system profiler tonight and happened on the firewall tab. Never really took a look to see what it said until tonight. I have stealth mode enabled, and have ever since I installed SL but the profiler seems to think otherwise?
View 15 Replies View RelatedBackground info:
A few weeks ago I upgraded from a regular macbook to a brand new macbook pro 2.66 ghz. I replaced the hard drive right away with a 500gb one (had it done by apple). So my machine runs snow leopard now, I used the data transfer mode to basicly copy the data and apps from my old macbook to the new MBP.
The "problem"
It all worked fine and smooth until a week ago ...For a week now I have a problem that really concerns me. Whenever I open my laptop from a sleep mode he gets really slow and unresponsive to my commands. Its like its crashing, all I can do to get out of this is a hard reboot.
However .. during a reboot OR a cold bootup the MBP gets stuck in the grey screen with only the apple logo .. after a minute or 3 it will start loading but it will never reach the login screen... The strange thing is that when I do reboot it over and over again .. it eventually will boot normally and when it does the MBP runs fine .. until I turn it off or put it in sleep mode .. then the nightmare will start again.
What I have done
I personally suspects the Hard Drive to be the culprit, I get the feeling that the Hard Drive is having trouble starting up or getting out of sleep mode. I am not sure tough.
I have done the following:
- Disc Utility (gives no errors)
- Booting up in terminal and run Disc Utility there (repaired a volume issue)
Could this be a leopard issue? I actually can't remember if this issue happened after the last macOS update or not ..I never had a problem with my iBook and Macbook so I have little experience on troubleshooting. So I hope you more technical experienced users can give me some tips on what to do here.
When I boot up the computer,I get a grey screen and what looks like a yellow firewire logo slowly floating around.I don't know much about computers but I was told it had something to do withmy computer waiting to be controlled by another computer.
View 6 Replies View Relatedwhen working on my new Imac sometimes the machine put itself in sleep mode! The screen turns black and I have to enter my password. Sometimes it happens 2 times in 1 minute; other times once in 1 hour.
View 3 Replies View RelatedMac Mini loaded with Leopard OSX. When I try to put it into sleep mode it just goes down and then restarts.
View 1 Replies View RelatedI can be in the middle of using an application, browsing a web-page, or basically any type of function when it will put itself into sleep mode. When this happens, I cannot get it to "wake up". I have to disconnect it from the power source, turn it over and remove the battery, wait a few seconds, then hit the power button, put the battery back in, then restart it. This is the only way I have found that will get it to come back to life. I don't like doing it, but I really don't see what other options I have.
View 1 Replies View RelatedTroubleshooting a broken display on a 13MBP with OSX Lion. Target is 2011 27' iMac running Mavericks.
Info:
iMac (27-inch Mid 2011), OS X Mavericks (10.9.3), Office for Mac
I'm not sure what to do. I haven't tried resetting NVRAM/PRAM or the PMU/SMC, but are there other options I can try besides those?
View 1 Replies View RelatedOne day I was using my MBP open and external monitor hooked up. Everything was fine until the internet went down suddenly while I was using iChat.
My airport wouldn't see a network and after a couple restarts and a few resets my airport finally connected to my network. Once connected it would only issue a self-assigned IP, which obviously wouldn't work.
I was able to get around this by manually entering in the correct info but the speeds were low at best, usually pausing and stalling every minute.
After frustratingly trying get it to work, I entered clamshell mode because there was no reason at the time to have dual monitors. Once I did, viola, the airport kicked in and started working full force. It's been this way for about a month now.
My laptop is a MacBookPro5,1 with a 2.8 GHz processor and 4 GBs of RAM.
I've read that airports will have serious degradation issues if overheated and while that may be the issue, it doesn't seem to be the case.
I have smcFanControl installed and the MBP seems to be relatively cool to the touch. The fans never seem to be loudly kicking in and I have it raised on a fan powered cooling pad.
I do, though, use pretty much every port on my MBP. External monitor, speakers, both USBs, and firewire 800 are all in use, so maybe this is a resource issue or a very area specific heat issue.
2.66 GHz Intel Core 2 Duo
8 GB 1067 MHz DDR3
I had a partition with windows 7. I deleted it for several reasons. I just wanna know if it is possible to run windows 7 via USB (I have the operating system in a USB). And if yes. How?
Info:
MacBook Pro, iOS 5.1
just trying to get back into Windows 7 after installing it via Boot Camp. Only thing is that holding down the option key during restart does nothing, and although the partition in which Windows 7 is installed under shows up in finder, I am unable to view it in system preferences so that I can boot from it. Any advice?
View 3 Replies View RelatedI installed Windows Vista, and Vista boots up fine. However, I hold down the command keys when starting my computer up again, and it won't let me select Mac OS X. It just starts Vista.
On "My Computer" in Vista I see "Bootcamp (C" and "Macintosh HD (E in my Hard Disks Drives. Also, whenever I start up Vista it tells me something about a wrongly formatted drive. My files are still all in the Mactintosh HD drive, but I don't know how to start up Mac OS X.
I WANNA TO KNOW HOW TO RESET THE WINDOWS SYSTEM ON MY MACBOOK.IT'S DUAL SYSTEM. WINDOWS AND MAC.MUST I HAVE TO UNINSTALL THE WINDOWS SYSTEM FIRST.THEN RESET?BUT HOW TO UNINSTALL IT? BY USING THE INSTALL DVD OR ANYTHING ELSE? HAVE I NEED TO BACKUP FIRST? AND HOW TO BACKUP THE FILES IN THE WINDOWS?
Info:
MacBook, Mac OS X (10.6.8)
When I put Windows 7 into sleep mode (not hibernate), it stops charging my iphone 3GS. I've always charged my phone this way in mac os x, and would like to avoid having to reboot just to put it to sleep in Leopard I have a macbook pro penryn, with Windows 7 RC 64-bit. I've searched the forums and didn't find anything. The internet suggestions seemed computer specific or involved a slightly scary hack involving "always-on usb".
View 2 Replies View RelatedAnyone tried to boot the Windows 7 XP Mode withi Parallels or VM Ware Fusion? Would be interesting to know if that works?
View 6 Replies View Relatedi got my macbook about 2 years ago when my mum bought it for me for christmas. My mum, being a completle idiot when it comes to computers, did not realise that it doesnt have windows on or that i did not have a clue how to use a mac.
So i immediatly asked my dad computer genius friend to change the operating system to windows xp. This means that when i turn the computer on there is NOT an option to go on either mac or windows it is JUST windows.
Two years later a really regret my decision and was wondering if i somehow found out how to remove windows would my mac operating system still be there or would i have to re install it completly?
