I just moved into a new place and my next door neighbor has told us that we can use his wireless connection. I have no problem connecting via my macbook but my fiance has an older Dell laptop that will not connect for some reason. It is recognizing the network but it will not connect. My question is, is there a way for me to connect her computer to the internet through my macbook wirelessly or does if have to be connected through an ethernet or usb cable? Her wireless card does work because before we moved it worked fine throught the router that we had in our house but now.
I have a Samsung SB970 S27B970D 27-Inch Screen LED-Lit Monitor with native resolution of 2560x1440. When I connect it to my 2012 13" MacBook Pro via mini display port to DVI, I am unable to get anything better than 1080p.
Here's what System Information shows for my displays. Intel HD Graphics 4000: Chipset Model: Intel HD Graphics 4000 Type: GPU Bus: Built-In VRAM (Total): 768 MB Vendor: Intel (0x8086) Device ID: 0x0166 Revision ID: 0x0009 Displays:Color LCD: Display Type: LCD Resolution: 2560 X 1600 Retina: Yes Pixel Depth: 32-Bit Color (ARGB8888) Mirror: On Mirror Status: Hardware Mirror Online: Yes Built-In: Yes Connection Type: DisplayPortS27B970: Resolution: 1920 x 1080 @ 60 Hz Pixel Depth: 32-Bit Color (ARGB8888) Display Serial Number: H3HCA00500 Main Display: Yes Mirror: On Mirror Status: Master Mirror Online: Yes Rotation: Supported Television: Yes
As you can see, 2560 should be supported.
Also note that we have two different MBPs and two different Samsung monitors (same model, ordered at different times) that do the same thing.
Complete Apple newbie actually. Just recently bought a MBP and want to get a large independent monitor while im using it at home. As much as I love the Apple display, I cant afford it at this time. I found a really nice Dell LED monitor that has DVI, VGA, HDMI outputs.
How can I hook it up to my MBP? What connectors must I purchase to make it work?
Just got my mini displayport to hdmi converter. So i hooked up my Samsung P2470 to my macbook pro 13" 2010, but i can't put the resolution of the samsumg any higher than 1600 x 900. How can i crank it up to the full hd resolution?(which the monitor supports).
I did just a bit of searching and found some cable answers but none that I thought fully answers my question, which is two-fold:
1. I am ordering a new 27" iMac but want to connect my Dell 30" monitor as a second monitor. I assume the iMac does not come with the necessary cable, but I'm not sure which one to buy. The Dell monitor is digital with a 2560x1600 resolution.
2. Would that same cable be able to connect a 2010 model Macbook Pro to the new iMac and/or the Dell?
The one area I feel Apple needs help is the multiple monitor situation. For years I have run laptops with 2-3 external monitors... I find myself having to go back to 2 monitors with either setup unless I buy some 3rd party hardware or shell out for a Mac Pro.
I received a 27 LED apple/mac monitor --not the 2011/12 version though.I want to use with my work computer--a dell laptop. I can't seem to find the right adaptor to connect the two.I need a dvi port converter that also connects to my vga on my laptop (so need the male end of hte vga since my laptop has the female end).I only found 1 adaptor but it ends with a dvi on a vga. I don't have hdmi on my laptop either--tried that adaptor as well when I couldn't see on the pic when I ordered that it was hdmi not usb). Please help. I have read so many blogs that say it can be done.
I'm looking for a new monitor to go with my MBP, and I'm stuck trying to choose between the ones listed above.
The 2407WFP is a couple of years old now I guess, but it's the rev A04 version, which supposedly fixed the (few) problems with what was otherwise meant to be a great screen. It's an sPVA screen.
I've heard good reviews of the G2410, with its LED backlighting. It's still a TN panel and I hear so much bad stuff about them.
The 2209WA is an eIPS panel which I like the sound of, but it's smaller and lower resolution.
The F2380 is a cPVA panel, the image quality looks better but I've heard bad things about blacks on this panel.
All of a sudden my macbook A1278 late 2008 doesn't connect to the WiFi network and displays the message Wi-Fi: No hardware installed. (it connects fine with a cable)
I am using Win 7 Home Edition 64 bit on an mid 2011 iMac via BootCamp; the problem is that i cannot select the 1600x900 screen resolution, as it is not available as an option at the Control Panel menu. I have reinstalled the windows support software, installed drivers directly from the ATI's site (both for desktop and notebook use) but the above resolution is not available. When i boot into Mac OS X, the 1600 x 900 resolution is available and is the one selected.
Info: iMac, Mac OS X (10.7.3), Win 7 Home Edition 64 bit, Bootcamp
I have an elderly Q950 with an external hard drive with everything backed up onto it. The external drive is a Micronet ADV1000E, with a sticker on the back saying it's Macintosh or PC compatible. I also have an iBook laptop, & PC Dell Inspiron 1300 laptop. As I have the 2 laptops, the Quadra hadn't been switched on for maybe one year. On the weekend I tried to get it to boot up (with & without the external drive switched on), but all it does is display a grey screen with an image of a 3.5" disk with a '?' in the middle. If I start up from a Norton 3.5" disk it still can't find the external or internal drive. If I try booting up with my finger in the shift key it doesn't want to know.
1. Any idea why the Quadra isn't seeing either the external or internal drive & what can I try to do? 2. Is there any way I can connect my external drive to either my iBook or Dell? At the moment I have no cables to connect the old & new - are cables available & if so any idea where from? I've looked high & low but so far no joy. 3. Is it possible to remove the hard drive from the Quadra or the external drive & put in an external drive enclosure, then connect that to either laptop? I see there are drive enclosures available which are Mac & pc compatible. This by the way would be a major undertaking for me. I'm by no means a computer dunce but would be wary of trying it.
I have a MacBook Air (11.6") and a Philips 234EL monitor whose native resolution is 1920 x 1080.
However, when I connect the monitor to the laptop with an Apple HDMI cable and a Moshi Mini DisplayPort to HDMI adapter, the maximum resolution I can get is 1600 x 900.
i have the computer in my sig. i am a graphic design student and will be using this for that. can my computer handle 1920x1200. will it be laggy at such resolutions? and does anyone have any experience with this monitor or suggestions for other good ones which are around 350.
I have a MacBook Pro 13" purchased in 2009, and I'd like to be able to use it as my main computer, which would mean plugging it into my monitors. I currently have two DVI monitors, of different sizes and resolutions (one 24" running at 1920x1080 and one 19" running at 1440x900). Is there any way to use both of these with my MacBook Pro?
This question might be a bit premature, however, given the 11.6 resolution, and Office 2011 system requirements (res req. is: 1280 x 800), do you think Office 2011 will install and run on the 11.6 Air?
I just noticed that all of my 16:9 resolutions have just disappeared from my available resolutions list in system preferences. They were there before. This is true for the resolutions of my 24" external monitor as well. What can I do? I need to have the 720p and 1080p resolutions available. But they're just gone. Every other resolution is there.
I am getting a Macbook Pro where the native resolution will be 1440 x 900 (I think).
Some older games (that I like to still play) do not support wide screen resolutions. On my PC this isn't an issue because under the nvidia control panel there is an option to tell the resolution not to scale. You get a black border around your screen if you do this, but at least it doesn't stretch it which looks awful.
I've had my 2009 Mac mini for a while now, and one thing has bothered me and I've yet to find anything on Google for this. I have an Acer 22" X223w monitor and in OS X I can select a bunch of 16:10 resolutions including 1280x800. Using Boot Camp, in Windows I do not have 1280x800 as an option. Is there any particular reason why this resolution would be in OS X but not Windows? Is there a way to get 1280x800 to work in Windows?
I have a 2008 Dual Quadcore 2.8 Mac Pro with the ATI Radeon HD 2600 video card installed that I use in a Pro Tools setup. I just bought a 25" LCD monitor with a 1920 x 1080 resolution. I want to run a 2nd setup to a 21" 1600 x 1200 monitor in the vocal booth with the same view.
Is this possible? So far, the main display defaults to the resolution of the smaller display.