I have a 2008 Dual Quadcore 2.8 Mac Pro with the ATI Radeon HD 2600 video card installed that I use in a Pro Tools setup. I just bought a 25" LCD monitor with a 1920 x 1080 resolution. I want to run a 2nd setup to a 21" 1600 x 1200 monitor in the vocal booth with the same view.
Is this possible? So far, the main display defaults to the resolution of the smaller display.
I have a MacBook Pro 13" purchased in 2009, and I'd like to be able to use it as my main computer, which would mean plugging it into my monitors. I currently have two DVI monitors, of different sizes and resolutions (one 24" running at 1920x1080 and one 19" running at 1440x900). Is there any way to use both of these with my MacBook Pro?
View 1 Replies View RelatedI just noticed that all of my 16:9 resolutions have just disappeared from my available resolutions list in system preferences. They were there before. This is true for the resolutions of my 24" external monitor as well. What can I do? I need to have the 720p and 1080p resolutions available. But they're just gone. Every other resolution is there.
View 7 Replies View RelatedI am getting a Macbook Pro where the native resolution will be 1440 x 900 (I think).
Some older games (that I like to still play) do not support wide screen resolutions. On my PC this isn't an issue because under the nvidia control panel there is an option to tell the resolution not to scale. You get a black border around your screen if you do this, but at least it doesn't stretch it which looks awful.
I've had my 2009 Mac mini for a while now, and one thing has bothered me and I've yet to find anything on Google for this. I have an Acer 22" X223w monitor and in OS X I can select a bunch of 16:10 resolutions including 1280x800. Using Boot Camp, in Windows I do not have 1280x800 as an option. Is there any particular reason why this resolution would be in OS X but not Windows? Is there a way to get 1280x800 to work in Windows?
View 5 Replies View RelatedMy sister in law was on my I mac last week while we were on vacation. All I have are 2 resolutions 1920 x1200 and 960 x600
Info:
iMac, Mac OS X (10.7.4), all I have are 2 resolutions
My current set up involves my 13" MacBook Pro (1280x800 res screen) hooked up to my external 1920x1080 24" monitor. I love using desktop wallpapers, but am trying to figure out a unified resolution that would match both screen resolutions since I frequently unhook my MacBook Pro and use it without the main monitor attached. I also dual-boot with Windows 7 so I have a shared partition that I have the wallpapers in. I thought I could disconnect the MacBook Pro and have a separate wallpaper for it in OS X; however, since I use it with the lid closed, when I did that, the wallpaper I had on my main monitor was used on my MacBook Pro's screen. For those of you who have a similar set up, what resolution wallpaper do you use that works without adjustment on both 1080p and 1280x800 resolutions? 1900x1200?
View 2 Replies View RelatedBy that I mean, are there three resolutions for the 24" LED ACD that are not blurry, or will every resolution other than 1920 by 1200 look bad? I was hoping to run it at 1280 by 800 to increase the font size and help my utterly horrible eyes.
View 1 Replies View RelatedI know that you'd need at least 2 graphics cards to run the 3 monitors. Is there a way to play games using all 3 monitors (if the game supports it). I know that with Windows, you would just use software supplied with the video card and make the computer "think" that it's 1 big display. With OS X, is there any way I can play games at triple monitor resolutions? I am also open to Bootcamp ideas, but then don't you have the same problem again because you have multiple video cards instead of just one?
View 10 Replies View RelatedCould someone please tell me what resolutions the High Res screen on the 15" supports?
View 3 Replies View RelatedI recently purchased an Official Apple Mini-display port to VGA adpter for use with 2011 unibody MacBook Pro and Samsung Syncmaster 2232 BW external monitor. When plugging everything in and going into displays, I am presented with the attatched display, with no option for any 16:10 resolutions, everything non widescreen down from 1600 x 1200. I've tried SwitchResX with no avail, and don't know what else to try? This is my monitor and its Native settings are 1680 x 1050?
Info:
MacBook Pro, Mac OS X (10.7.2)
I just bought a 24" ACD, and I love it. However, because my MacBook Pro is only 1440x900 resolution, if I resize anything it'll go out of proportion on my MacBook Pro screen.
Ideally, if there was such a program, I'd love to be able to have my windows set a size and position for 1900x1200 resolution, and for them to have a different size and revert to that when I use my MacBook Pro's 1440x900 display.
Does that make sense? I just don't think I can be bothered having to resize Safari, drag any windows that were over on the right hand side of the 24" display back over on my MacBook Pro display just to see them when I unplug the 24".
I'm sure it wouldn't be too hard to make an application that does something like that - just take note of the window positions and sizes for both resolutions and switch between them when the resolution is changed.
i have the computer in my sig. i am a graphic design student and will be using this for that. can my computer handle 1920x1200. will it be laggy at such resolutions? and does anyone have any experience with this monitor or suggestions for other good ones which are around 350.
View 6 Replies View RelatedSo I tried watching a movie I bought from iTunes on my classic last night just for kicks, when I realized it didn't fit on the screen. Why? Because the resolution, of a movie purchased on iTunes, was completely wack--853x354. Looking at my other fine iTunes purchases, these are the resolutions, all over the board: 21--853 x 354
View 11 Replies View RelatedBasically on windows vista, the nvidia control panel let me create custom resolutions for my HDTV display. Is this possible in Mac OS X Snow Leopard?
View 8 Replies View RelatedI only have 2 Display Resolutions left after upgrade to 10.7.4.... How do I get back the ones that disappeared?
Info:
iMac (24-inch), Mac OS X (10.4.7)
This question might be a bit premature, however, given the 11.6 resolution, and Office 2011 system requirements (res req. is: 1280 x 800), do you think Office 2011 will install and run on the 11.6 Air?
View 10 Replies View RelatedProblem:
Apple Mini Display Port does NOT work at resolutions over 1600X1200 on NON Apple Cinema Displays.
That means if you own any other brand of monitor such as NEC, Lacie, etc. you will NOT get native resolution on your 24 inch monitor as it is stuck at a maximum resolution of 1600X1200.
This story was mentioned on "Macbreak Weekly" show 4-14-2009. I have since checked with a few people and it would indeed seem to be true at this point.
I REALLY hope a solution from Apple comes soon and this is not some new policy of theirs. If so, it may be the last Mac Pro I will or can ever own. The reason is I do a lot of 3D work with C4D, Vue, Modo and Photoshop CS4 so I MUST have a monitor like the high-end ones from Lacie that have 100% color gamut and Adobe RGB. I can NOT be tied down to an Apple Cinema display due to that work. At this time, it seems this means I would only get 1600X1200 resolution on that 24 inch monitor.
I am HIGHLY concerned by this. Has anyone else confirmed this too and if so what the heck is Apple thinking or better still going to do about it? I LOVE my Mac Pro but if they start forcing Apple displays on us then I won't be buying another Mac, it's just that simple.
I've previously owned a 12" iBook G4 1.07GHz, and had a resolution of 1024 X 768 on my 17" DELL P780 display. Now I have a 1.33GHz G4 iBook. Same size. Wouldn't go past 800 X 600, I tried restarting, Display Preferences, EVERYTHING.
View 5 Replies View RelatedI've got the latest Mac Mini and have a Mini DVI to VGA adapter and also a Mini Display Port to VGA adapter. My monitors are a 19" 1440x900 one one the left and a 1920x1080 one on the right. I have the 1920x1080 through the Mini DP connection and it displays a perfect 1080p image. My problem is that the 1440x900 resolution does not show within the display options, although other resolutions do.
View 1 Replies View RelatedAny top-end 27� iMac owners (5750 GPU) have a little time to burn for someone who is jealous of you?
In System Preferences > Displays, I�m wondering what the full list of Resolutions is.
Apple Mini Display Port does NOT work at resolutions over 1600X1200 on NON Apple Cinema Displays.
That means if you own any other brand of monitor such as NEC, Lacie, etc. you will NOT get native resolution on your 24 inch monitor as it is stuck at a maximum resolution of 1600X1200.
This story was mentioned on "Macbreak Weekly" show 4-14-2009. I have since checked with a few people and it would indeed seem to be true at this point.
I REALLY hope a solution from Apple comes soon and this is not some new policy of theirs. If so, it may be the last Mac Pro I will or can ever own. The reason is I do a lot of 3D work with C4D, Vue, Modo and Photoshop CS4 so I MUST have a monitor like the high-end ones from Lacie that have 100% color gamut and Adobe RGB. I can NOT be tied down to an Apple Cinema display due to that work. At this time, it seems this means I would only get 1600X1200 resolution on that 24 inch monitor.
I am HIGHLY concerned by this. Has anyone else confirmed this too and if so what the heck is Apple thinking or better still going to do about it? I LOVE my Mac Pro but if they start forcing Apple displays on us or limiting the display ports, then I won't be buying another Mac, it's just that simple.
I just installed "SwitchResX" (stupidly - IMPOSSIBLE to get rid of! ) and now two of the default eMac screen resolutions are missing in:
System Preferences >> Displays:
Please someone, tell me how to rid myself of this crappy software, and also how to get back my default resolutions in SysPrefs - I am losing my mind here!.
How might I connect two Dell U3011 displays at resolutions each of 2560 x 1600 to a recent Macbook Pro?
Info:
MacBook Pro, Mac OS X (10.7.3)
I have read over and over how many users have sleeping issue problems. The way I look at it is just leave your computer on. Mine runs 24 hrs. a day 365 days a year. I never put it to sleep. Yes you well save a little hydro but your problems will go away. When I am not sitting at the computer I turn off the monitor. I have done this for the last 10 years on the PC and since Feb.14 on my new MacPro without any issues. So in my opinion, leave your Macs on and turn off your monitors when not in use.
View 5 Replies View RelatedI'm just wondering what the cheapest way to go about this is. Currently my graphics card is the 8800, but I think I've read that you don't have to have the same graphics card to add more monitors (the ATI base graphics card will do just fine). So do I just need to purchase one from apple or am I able to get one cheaper from anywhere else? Also all of the supported graphics cards output 1920X1080 right? And on a side not - this output will be going to my television - is there any way to make front row default to the television output?
View 5 Replies View Relatedcouldn't find an answer so far: Is it possible to run 2x 8800GT (Apple or flashed PC) in one Mac Pro 2008? I know, SLI doesn't work but I am curious if I can run 2 monitors (e.g. for FSX in Bootcamp). Did anyone try this or is this outside the Power-limits of the PCI bus?
View 12 Replies View Relatedhttp://www.tigerdirect.ca/applicatio...841&CatId=2318
or the
http://www.tigerdirect.ca/applicatio...416&CatId=2775
1) Better color accuracy
2) Better for gaming
3) Overall Quality
Every couple of days, after my screensaver has been running for a few minutes... both of my monitors will shut off. Then no matter what I do, they won't turn back on again. The only way to get them working again is to do a forced restart.
View 1 Replies View RelatedWe have:
1. MAC OS X iAtkos 10.5.7 updated to the latest version.
2. GygaByte GA-EP43-DS3L
3. nVidia GeForce 8500 GT 256 Mb
4. Nec AccuSync LCD 223WM (LCD 23 ")
5. LaCie Electron 22 Blue IV (CRT 22 ")
Problem:
When connected to two monitors, one of them displays a welcome screen, and then both turned off.
