Trying to run BT broadband speed checker It keeps telling me Flash is not stalled It is and I have disabled Ad-block, click to Flash etc and restarted...
Info:
MacBook Pro, OS X Mavericks (10.9.4), MBPR 13" 4 RAM MID 2010
I just downloaded and installed the new Canon drivers from their website that are supposed to support Scanner/Printer functions for my MX870 with Yosemite, but when I go to Settings for Printer/Scanner and try to add the printer from the wireless network, the computer does not detect it.
Info:
iMac (21.5-inch, Late 2013), OS X Yosemite (10.10.1)
I just bought the macbook air (1.6/80) at bestbuy for 1299. It was the last sealed box, woot. Curious though, this doesn't occur on my other laptop so I know it's not bandwidth issues. I am watching office at full screen, half way into it the video starts to stutter bad. I don't mind the cpu fans going full speed, or the heat, because that's the nature, however I can't stand the stuttering. Has anyone had experience in Revision 1 and watching hulu and getting it not to stutter half way into the episode?By the way nothing else is opened and/or running. Just safari. I also installed Flash 10 and updated the MBA completely with 3.2 safari
View 8 Replies View RelatedFlash player just WON'T stay install. This has been happening for a while, but today alone I've had to re-install it 10 times. After about an hour or less everything just says "Plug-in Failure". I'm not sure what's happening..
Info:
MacBook Air, Mac OS X (10.7.3)
MacBook Pro (Retina, 13-inch, Mid 2014)
OS X Yosemite 10.10.1
After working just fine I am having 2 problems.
1. I keep getting prompted to date and install Adobe flash player - my Mac says already installed.
2. Answering emails to some friends is impossible - message says cannot connect to server......
I followed all the instructions in the previous threads and unstalled my older version on flash. Then installed PPC Mac Flash version 10.1.102.64 and it says installation complete but when I go to test it nothing works. I tried restarting and uninstalling and starting over. I keep getting installation complete but still no go. I checked all my soft updates and everything looks good.
View 5 Replies View RelatedSo I installed the latest update to Flash hoping it would help with my periodic spinning beach balls when using Safari (plus, Firefox told me I needed to update my Flash). So, I don't see anything in my Applications folder. Where is it and how would I uninstall it if I wanted to?
View 2 Replies View RelatedAll of a sudden can't play videos. I get a message that the correct version of flash is not installed. I have download the lastest flash version for my operating system but still can't play videos. I still get the same message - flash is not installed. If I check system preferences, flash is listed as installed. If I check for plug- ins in Safari I do not see flash. What do I need to do?
Info:
iMac, Mac OS X (10.5.8)
For some reason that I can�t explain I am unable to watch any youTube videos on my iMac. I have "click to Flash" installed and can watch flash content on all other sites. When I login to my account at youTube I also need to click to flash but then I get instead of the video, a "go Upgrade". I took this to mean that the flash player needed upgrading so I agreed to download the latest Flash Player and installed it. This has made no difference. I even went so far as to create a new YouTube account with a different e-mail address but nothing helps. Can anyone please give me some advice what I can do or try to get to watch the YouTube videos?
This problem is only when I use Safari. Using Firefox I can watch youTube.
I have a Mac with OS X 10.7.4.I have uninstalled and re-installed Adobe Flash player several times.Each time I install it, it says the installation was successful.However, it does not work on any site we visit containing flash content.
Info:
iMac, Mac OS X (10.7.4)
I installed adobe flash player but can't get it to launch?
Info:
iMac, Mac OS X (10.6.8)
About a week ago, we accidentally installed what we think is a bad version of a flash player when attempting to register a rewards card. We un-installed the software as soon as we realized it was not the correct website for the rewards card. Since then, we are getting a flashing pop-up ad in the right column of the browser as well as a video window that pops-up from left bottom of browser and then multiple windows in Safari will just open.
Info:
iMac (21.5-inch Mid 2010), iOS 7.0.6
Google Earth plugin in Safari started to keep crashing after I installed Adobe Flash Player 11.2. The plugin works fine in other browsers (Firefox, Opera, and Google Chrome).The same occurs at home,too.I use Mac Pro at work and iMac at home. Both are on OSX10.7.3, Lion.
Info:
Mac Pro, Mac OS X (10.7.3)
For the last couple of month or two, my MacBook Pro hasn't always been recognising all of my 4Gb of RAM and only detecting one of the two 2Gb RAM installed.
I thought it might have been a hardware problem but I have been able to restart OS X when it only detects 2Gb and after it has rebooted it would see all 4Gb of RAM but recently (last week or so) when I restart this no longer happens and it still only detects 2Gb not matter how many times I restart.
The 4Gb of RAM installed is the factory shipped RAM and I haven't opened my MBP to make any modifications.
For some reason when I boot into Windows 7 through BootCamp it detects all 4Gb of RAM.
I am having real trouble running some applications that I need due to the fact that I only have half the installed RAM available.
Info:
MacBook Pro, Mac OS X (10.6.8), Intel Core 2 Duo 2.66GHz, 4GB RAM
I bought a 4-port USB hub (Gear Head if it matters) and it's supposed to just plug in and work. I normally use a USB mouse & keyboard, thus taking up 2 out of 2 of my MacBook Pro's USB slots. I bought the Hub so I could add in a light or speaker for late night gaming sessions and quiet videos respectively. The light on the USB Hub turns on, but it isn't detected by my MacBook Pro. Anything I plug in to it recieves enough power to turn on (Speaker's Power light turns on, Mouse's laser will turn on, etc...) but they aren't detected by the MacBook Pro. IE; Mouse won't move on screen, keyboard will not type, speaker isn't shown as an option for outgoing sound device, etc...
Info:
MacBook Pro, Mac OS X (10.6.8)
Installed a new Seagate Momentus XT 750gb into my mid 2009 mbp. When I tried to install my leopard the HDD was not detected.
So I put in the original HDD and installed leopard into the Seagate via USB with success. Prior installation I formatted the Seagate already.
Then I install the Seagate into the mbp again but still it cannot be detected.
Info:
MBP 2.8G Intel Core 2 Duo, Mac OS X (10.5.8), 4Gb RAM
Using both smcFanControl and istat, I cannot get a reading on my fan speeds. I can hear my exhaust fan spinning, but these programs tell me it is always at 000 rpm. Also, I don't think the fan control is working, as I don't hear an increase in fan speed when I make adjustments.
Does anyone know how I can get these apps to recognize my exhaust fan?
my 3g dongle is not detected in both usb ports on my new mac book pro?
View 2 Replies View RelatedI'm running Mac OS X Lion (latest version) on a MacBook Pro mid-2010 model. OS X Lion was installed via recovery tools a few days ago. Today I plugged in a brand new Crucial M4 SSD via USB and it got detected. I restarted the laptop in recovery mode using cmd + R and chose to install Lion on the external SSD. For this I first had to partition the SSD before it showed up as a valid drive where Lion could be installed. The installation went almost to the end, but then stopped rather strangely for a very long time. So I decided to cancel the installation and restarted the laptop normally. Since then the Crucial M4 SSD is not being detected at all (doesn't even show up in Disk Utility).
Info:
MacBook Pro, Mac OS X (10.7)
I have a MacBook Air and am trying via DVI cable to connect another display? The Mac will not detect the other screen. Any suggestions would be terrific. Do I need to "install" the old screen?
Info:
iPhone 4S, iOS 5.0.1
I have an early 2011 Macbook Pro 13 it was working OK but now has come up no batteries detected and I have tried a pram reset, smc reset and a new battery but still no luck. I did manage to get it to work for a while by turning it on with the power adapter connect then restarting it but at the point of the restart I pulled the power and it came on with the battery.
If I start it with the power adapter connected and then pull the power it will boot to the login screen briefly then go into sleep until I reconnect the power. When the power adapter is connected it just has a solid green light at all times never changes even if I do the smc reset.
Info:
MacBook Pro, OS X Yosemite (10.10), Early 2011
my mac wont' detect the battery and cannot be turned on unless it's plugged in. What should I do?
Info:
MacBook Pro, OS X Mavericks (10.9.2)
I have a macbook pro and i used my old phillips tv for a 2nd screen. Bought a DVI-I to DVI-I cable, and was working just fine. For xmas I got a Dynex 26inch. I noticed it has a VGA and not DVI input, so I figured I would buy a DVI-I to VGA adapter and still be able to use the same cable. I go to hook it up and my TV says no signal.
On my laptop it detected the tv as BBY LCD TV, but still has no picture. Is there a setting I need to change? Or is the better route going with a new DVI-I to VGA or HDMI cable?
when i entered any disc (dvd/cd), my mac cant detect it and instead there's like an alarm sound. after a few minutes, it automatically eject the disc without giving any error message whatsoever.
i'm using Model Name:MacBook
Model Identifier:MacBook5,1
Processor Name:Intel Core 2 Duo
Processor Speed:2 GHz
I upgraded to 10A432 last week. Today I plug in my headphones and to my surprise they dont work. If the headphones are plugged in audio comes out of computer speaker. Under Sound in Syspref it doesn't see the headphone. My mac is still under the 90 day warranty but I am studying in Purdue and don't know where the nearest apple store is.
View 3 Replies View RelatedI have a Hanns-G 22in monitor that I'm trying to connect to my new Macbook Pro. There's a DVI cable connected from the monitor to the macbook pro with a little converter cable. I've tried what seems like every iteration of sleeping, turning off, and turning on both the laptop and the monitor to no avail. The monitor always remains black as if it's connected to nothing. I know the monitor is good, too, as I use it for my PC on a daily basis.
View 9 Replies View RelatedI just upgraded my late model Penryn MBP from the stock Hitachi 200GB 5400rpm drive to a Seagate 500GB 7200rpm drive. Performance wise, I'm happy. XBench is indicating a significant gain on the disk test (especially in the sequential test) and I loved being able to use Quicksilver almost as soon as I saw the menubar. However, when I turned on the machine, it did not recognize the drive automatically, and I had to hold down the Option key in order to get it to boot from the disk. I cloned my old HD using CarbonCopy Cloner. Once I did that everything was (obviously) fine. How can I get the MBP to recognize my new disk as the default boot volume?
View 2 Replies View RelatedAfter installing the 10.7.4 Update, my MacBookPro 15 inch, early 2011, says "No Wi-Fi hardware detected".After resetting the PRAM and the SMC, functionality came back, but only until i have to shutdown the Book. After turning it on on again, again "No Wi-Fi hardware detected" under the Wi-Fi symbol in the menue bar. Again, after resetting PRAM (waiting for 3 chimes at startup), Wi-Fi hardware is detected again and working properly.
Info:
MacBookpro, Mac OS X (10.7.4)
I have a macbook pro. There is a built in camera. I can use to camera with Imovie, but it does not detect the camera with screenflow. I do not see the isight software on my machine. Do I simply need to buy the software? Seems like it should of been on the computer already (purchased used)
View 2 Replies View RelatedI've been running a Benq G2400W on my MacBook Pro since December 2008 with no problems. I recently has my logic board replaced due to a power issue. I got the computer back a few weeks ago. For some odd reason, my monitor refuses to accept the signal from my MacBook Pro over DVI. I can use the DVI to Analog converter and it works just fine.
I did find a thread over at Apple Support Discussions outlining the exact issue I am having. The solution is to remove a pin from the DVI cable. I shouldn't have to destroy a cable to get this to work again. I might order a new cable/adapter from monoprice.com and destroy it if that is my only option though.
I just can't figure out what changed except for the logic board swap...but I don't remember if it has worked over DVI since I got it back.
I deleted the windowserver plist for my user and the system one with no change in behavior. Are there any other settings I could try resetting?
I've unplugged the Benq and reset the monitor via the OSD to default settings.
I did read over at anandtech that it could be HDCP related...but I'm not trying to watch a video.
I plugged the laptop into a Dell 1905 at work via DVI and it worked perfectly fine.
