I have installed bootcamp in my MBP, with win7 and OSX dual OS.Now, i cannot start OSX in bootcamp. When i choose restart in OSX in bootcamp, it will still restart in win 7..And when i restart MBP with pressing OPTION, there only remain 2 options, the bootcamp windows, and the recoveryHD.I think the cause of this trouble was i used some kind of partition software.
Info:
MacBook
Pro, Mac OS X (10.7)
i have the metal macbook (bought november 2008) and i wanted to install windows xp on it. I read my manual i got with my mac and used the boot camp installation thing. I managed to do the hardrive partition thing and it got to the stage after that where it said it was installing windows, so i followed the instructions and then once it restarted after that it kept going back to the 'install xp' screen. I restarted my macbook and took the disk out and when i started it up again it kept coming up with a message which 'no bootable device -- insert boot disk and press any key' . So figuring it was part the way through installing xp i inserted that disk again but when i pressed any key it didnt do anything so i restarted it again with the disk in and this time it came back up with the blue windows setup screen. I followed the installation instructions again making sure i picked all the options that the bootcamp instructions told me. Once it got to the restarting stage again it kept loading up with the windows setup screen again. I figured i would be going round in circles if i chose to install it again so i restarted my mac and took out the xp disk and put in my mac installation disk instead. Got all the way through the installation part until you have to 'select a destination' and its got nothing to select? just wondering what to do from here if possible id love to be able to save the files that were on my other bit of the partition (not the windows xp bit) but really i just need my macbook working!
View 7 Replies View RelatedI've read around saying most cases you need to update Video Drivers. Since I'm on a Mac with Windows 7 in bootcamp it's not that simple, I think? Should I just put in Mac cd to install drivers again or any method to fix a disappearing Windows 7 start bar in bootcamp? It happens every time I boot into Windows now.
View 4 Replies View Related just installed bootcamp,and the drivers from the apple cd,it went smoothly
it was installed on a new 20GB partitionI use Windows XP,and OS X 10.5.7Now,after the windows was installed,i restarted my mac,holded option,and chose the OS Xisk...
there was the apple logo,than a blue screen,and it stayed that way...blue screen was changed by a bluish-gray screen every 25 seconds or so,but that was short,and it got back to the normal blue screen...that went on for some time,and i had to hold the off button for 5 seconds to turn it off...i tried starting os x from safe mode,but it only started windows on safe mode,even though i chose the os x disk...
Yesterday I erase the windows partition on my macbook pro through bootcamp.
Then I restart my mac and it tell me "no bootable device ...". If I press alt button during the starting, I can see my mac partition, but when I choose it, it's impossible to access.
Unfortunately my Leopard install disk doesn't work anymore (really really strange, it's perfect without any scratch) and I can only use a old tiger disk. So I can see that it's no more present any startup disk!!! Bootcamp deleted my mac startup disck.
Through the terminal I can see that alls my data are presents!
Suggestions? I guess the only way to restore my mac it's to buy snow leopard and re-install the system saving the data.
I installed on my mac using bootcamp (I use parallels), so, After a few attempts as my s/n was entered incorrectly... I finally got xp working. However when running the mac, XP loads up automatically. I can not seem to get the mac to start up. I done everything by the book, why is this happening? how do I fix? I can now access the MAC, I have removed the windows section... however it still tries to start up windows...
View 2 Replies View RelatedI trying to start bootcamp to install Windows Xp., but one window appear to ask me to format my HD...so I think I must to reinstall Snow Leopard again and after windows?
View 4 Replies View RelatedI just installed bootcamp and the drivers from the apple cd, it went smoothly. It was installed on a new 20GB partition. I use Windows XP,and OS X 10.5.7. Now,after the windows was installed, I restarted my mac, hold option and chose the OS X partition, there was the apple logo then a blue screen,and it stayed that way. Blue screen was changed by a bluish-gray screen every 25 seconds or so,but that was short and it got back to the normal blue screen. That went on for sometime and I had to hold the off button for 5 seconds to turn it off. I tried starting os x from safe mode, it took longer to start, but it still wouldn't work. I used the "Bootable Utilities" disk,and opened Disk Utility,and Disk Warrior,checked the disk,they didn't find any errors.
View 4 Replies View RelatedDid some software updates to the Windows side of the Mac via Bootcamp the other day and now whenever my backup drive is plugged in to my computer (always is) the Mac will boot into Windows by default. I checked the startup disk and reset them back to Mac, but it doesn't matter. If the drive is connected it will now always boot in to windows by default. If I unplug the drive and start up the machine it goes in to Mac just fine. Not exactly sure wtf happened.
View 1 Replies View RelatedI have a Mac Mini and I am running Snow Leopard and BootCamp 3.0. I am trying to install Windows XP. I'm using BootCamp to partition the disk. I've tried with different sizes, the outcome was the same. After partitioning I can see the Bootcamp volume in Finder and on the desktop. Bootcamp then tells that I can start the installation. The Windows XP CD is in the drive. Restart follows. And then nothing but the gray screen. No installation starts. I have to shut down the computer and start it again.
This time I hold the option key and there is only the Mac OS volume! There is no sign from the BootCamp volume. After starting the computer again it doesn't boot from the Mac OS volume, there is the gray screen only, which means that the startup disk have been changed and that usually happens when you install windows with bootcamp - it changes the startup volume from Mac OS to the BootCamp volume, but still the BootCamp volume is not there. I've installed Windows XP with BootCamp several times. I know how it works. Installation starts automatically after the restart.
I have, somehow, reset my entire OSX. The Dock is now huge, all of my icons are now reset to the default ones when I originally bought the Macbook Pro. The software is still there but the icons have been reset. The icon no longer bounces when I open it.
And I know exactly why. I was in Windows through bootcamp doing routine maintenance and decided to do a full scan using Microsoft Security Essentials. I forgot to have it ignore the E:/ drive which is where MacOSX installed. It must have got 25% through scanning it before I realized it. I don't even know if that can cause a problem but it obviously did. I booted into OSX just to double check everything was ok. It loaded fine, all icons where there and seemed like everything was ok. Except the icons weren't bouncing when I opened up an application even though it was checked in the preferences. This frustrated me so I rebooted again to see if that would fix the issue and now here I am. Completely back to factory defaults. My software is still there but the Dock reset itself and it seems as if other things reset. I'm doomed. So how do I start a reinstall process? Insert the Snow Leapord disk?
Im having problems getting back from my windows partition to the original leopard os. Im using a imac that came with the os already installed and after reinstalling windows to format it I no longer have bootcamp. Is there a way of changing the start up disk to the mac os or downloading a full free copy of bootcamp?
View 2 Replies View RelatedMy imac is around 4 years old and has been running both windows bootcamp and os x snow leopard for at least 3 years without any problems. My default operating system is mac and when I tried to turn it on this morning it gets stuck on the white screen with the grey apple icon and the loading icon spinning. Also a bar appears below this that I have never seen before. Â I have tried opening the mac in recovery mode but it does not respond and goes to the same logo screen. Â
I have tried holding the 'D' key down while the mac comes on and doing the apple hardware test but once the window pops up it does not complete the probing and appears to freeze just before its completion. Â I have also tried booting in safemode but the script stops at these commands:
-launch tl: Please convert the following to launchd: etc/mach_init.d/dashboardadvisory.plist
-launch_msg(): socket is not connectedÂ
However, the windows bootcamp is working fine and I can access my mac files from there.Also worth mentioning is that it is not a grey screen that appears on start up it is just the normal apple icon screen. Â
Info:
iMac (21.5-inch Mid 2010)
Used migration assistant to move my Blackbook apps and settings to the Air using a Time Machine backup from my Time Capsule - wirelessly. Two hours later (not terrible) and I'm using my Air with all my apps and setting - fantastic.
Question: My Blackbook also has a Bootcamp partition running Windows - is there a way to take that image and migrate it to my MB Air? I'd rather not have to purchase the Superdrive and re-install/setup the Windows OS on my Air....
My computer won't turn on. Earlier today while playin music it just paused itself. I minute later it resumed. Then tonight it just shut off instead of sleeping and now it won't start. All I can get if I'm lucky is the start up chime and a super quick flash of a white screen.
Info:
MacBook Pro
My macbook takes ages to start not sure why
Info:
MacBook, Mac OS X (10.7.2)
My computer is a MacBook Pro running Mac OS X Version 10.7.3, 2.2 GHz Intel Core i7 with 4GB memory. Start-up has become somewhat erratic. Consistently, if I close the lid on the computer it won't restart when I reopen it. I'll have to hold the power button down for about 15 seconds, let up and then press it again. Sometimes restarting after a shutdown the computer will go through the long start-up I associate with a crash shutdown. Sometimes login start-up items don't start up. Sometimes I have to click somewhere on the screen to make the menu bar at the top of the screen visible. Overall, unexpected things keep happening. Although I don't think it probably relates, Chrome is my primary browser.
View 4 Replies View RelatedMy start up disk is my hard drive.Â
Whenever I take the hard drive out my laptop just stops working and it's back to normal when I put the hard drive in, is there a way for me to use my laptop without having to physically have my start up disk (hard drive) plugged into my laptop?
Macbook Pro can't start up beyond the grey start up screen. There's a spinning wheel and bar that moves to 1/4 before Macbook Pro shuts down automatically.
Info:
MacBook Pro
I am not 100% sure what the offical name of the start up noise is when you turn on your Macbook, however that is all I am geeting when I turn it on. I push the power button, it makes that start up noise of the disc drive... sits... and makes the noise again... sits... makes the noise again and so on and so on. The screen doesnt change at all, just blackness. I was able to start it up once with the start up disc and I thought that was the fix, so before going to sleep I powered down. Woke up the next morning same old bs AND it will not start up off the disc again. Another time after letting it sit and try to boot up for awhile (30mins) it finally did! However after 20-30 mins the screen kind of flickered and then everything froze. Can't get it to turn on at all now. Just that noise over and over and over and over again.
View 3 Replies View Relatedhad a bootcamp partition which I eventually ended up removing again with the bootcamp assistant.Now I want to create the bootcamp partition again, and when I start up the assistant, there is a 5gb leftover partition of the old bootcamp it seems. I just can't resize it... I've tried anything as low as resizing it to 10gb to 100gb... both fails.I have more than 200gb free space.I have just run a full defrag with iDefrag I've tried to do fileoptimization with techtool pro v5
I tried using camptune (which only works if you already have a working bootcamp partition, which I dont.
im on a goal to resize my bootcamp partition... im running 10.6.4 with Win7 in Bootcamp... i made a mistake of only making a 80GB partition for windows 7.... now i want to make it bigger, i have read up on a number of methods but most are outdated and users report issues with windows 7 and SL so i'm a lil stuck... this is my idea
I have 120GB unused HDD space atm so could i.. back up my 80GB partition to a DMG with disk utility then delete the old partition making the whole 200GB unallocated space... then use the bootcamp utility to re occupy the space then use disk utilities restore option to restore the image of the 80GB to the new 200GB partition... would this work? if not has anyone got any other methods to use with 10.6.4 SL and Win7?
[URL] input Music into vent and whenever I press "start" I either Get an Error Saying "cannot start Jack server, Please Check preferences or retry after a system reboot" or "Fatal error has occurred shutting down." and I reinstalled it and Used the default preferences
View 1 Replies View RelatedFirst off, let me explain the position I am in. I have the newest 13in MacBook with a 2.4Ghz hard drive. I installed Windows Vista on it recently after I got it. Many times while using Vista, all audio would stop and be replaced with crackling sounds. This would continue until I restarted. I tried going to Dell, downloading drivers for the Broadcom 802.11n WiFi Adapters and installing those, but that caused a worse problem. Windows can no longer find any networks, and when I select the Broadcom WiFi Adapters in Device Manager, it says "This device cannot start." and says it's Code 10 or something.
View 7 Replies View RelatedMy iMac does not start up as usual. I now get a ' start up disk is full. You need to make space available on your start up disk by deleting files' message. Â I am able to key my log on password however I just get the purple galaxy screen with no desktop.Â
If I try to use the keyboard I get a tone when pressing the keys. Â
Has worked perfectly well up until I got this dusk full message. Â
computer won't start. tried unplugging and holding in start button. After about a half hour and unplugging a few times, finally got it going. Imac G5
Info:
iMac, MacOS X (10.5)
Bought an OEM version to use with bootcamp. Everything works fine up to the point where it is supposed to let me format the partition that bootcamp created. The XP installation just skips right from when I select the C:yatta-yatta/bootcamp partition and starts installing. So obviously the partition is not bootable... Does anyone know if this is because the OEM version of the OS or something else. I tried to reduce the size of the partition because I read a thread about FAT32 not playing well with disc sizes greater than 32Gb. Still didn't work...
View 2 Replies View RelatedI want to try out Windows 7. During this process though I deleted my winXP partition. When I went to create a new BootCamp partition in The BootCamp SetUp Assisstant, it failed to create the partition on my harddrive.
I was greeted with the error, "BootCamp SetUp assistant failed to yada yada yada, please backup and reformat your harddrive."
So my question is do I really have to reinstall Mac OS X? (I backup with TimeMachine so it won't be a big deal but still thats a very long process.) Do you guys have any tips or anything to get Mac OS X to partition my main HDD?
im kind of new to this and i was trying to get bootcamp to run and also the windows partition that runs on bootcamp through vmware fusion. ive installed and uninstalled like 12 times now in 2 days and its driving me nuts. no matter what i do i cant get it to work. maybe someone on here can give me some tips because im lost.
View 6 Replies View RelatedMaybe I'm just over thinking this, but Apple never posted a KB article about how to upgrade an existing bootcamp partition with the new snow leopard bootcamp 3.0 drivers. I'm assuming if you already have bootcamp 2.1 you boot up in boot camp and then insert the snow leopard disc in order to upgrade the drivers to 3.0 correct? Or do I have to erase my stupid bootcamp partition and reinstall it all over again using the new leopard boot camp assistant in order to get to 3.0?
View 11 Replies View Related